Ultrafiltration separation of Am(VI)-polyoxometalate from lanthanides.

Partitioning of americium from lanthanides (Ln) present in used nuclear fuel plays a key role in the sustainable development of nuclear energy1-3. This task is extremely challenging because thermodynamically stable Am(III) and Ln(III) ions have nearly identical ionic radii and coordination chemistry. Oxidization of Am(III) to Am(VI) produces AmO22+ ions distinct with Ln(III) ions, which has the potential to facilitate separations in principle. However, the rapid reduction of Am(VI) back to Am(III) by radiolysis products and organic reagents required for the traditional separation protocols including solvent and solid extractions hampers practical redox-based separations. Herein, we report a nanoscale polyoxometalate (POM) cluster with a vacancy site compatible with the selective coordination of hexavalent actinides (238U, 237Np, 242Pu and 243Am) over trivalent lanthanides in nitric acid media. To our knowledge, this cluster is the most stable Am(VI) species in aqueous media observed so far. Ultrafiltration-based separation of nanoscale Am(VI)-POM clusters from hydrated lanthanide ions by commercially available, fine-pored membranes enables the development of a once-through americium/lanthanide separation strategy that is highly efficient and rapid, does not involve any organic components and requires minimal energy input.

A monotreme-like auditory apparatus in a Middle Jurassic haramiyidan.

Among extant vertebrates, mammals are distinguished by having a chain of three auditory ossicles (the malleus, incus and stapes) that transduce sound waves and promote an increased range of audible-especially high-frequencies1. By contrast, the homologous bones in early fossil mammals and relatives also functioned in chewing through their bony attachments to the lower jaw2. Recent discoveries of well-preserved Mesozoic mammals have provided glimpses into the transition from the dual (masticatory and auditory) to the single auditory function for the ossicles, which is now widely accepted to have occurred at least three times in mammal evolution3-6. Here we report a skull and postcranium that we refer to the haramiyidan Vilevolodon diplomylos (dating to the Middle Jurassic epoch (160 million years ago)) and that shows excellent preservation of the malleus, incus and ectotympanic (which supports the tympanic membrane). After comparing this fossil with other Mesozoic and extant mammals, we propose that the overlapping incudomallear articulation found in this and other Mesozoic fossils, in extant monotremes and in early ontogeny in extant marsupials and placentals is a morphology that evolved in several groups of mammals in the transition from the dual to the single function for the ossicles.

Accelerating the design of pili-enabled living materials using an integrative technological workflow.

Bacteria can be programmed to create engineered living materials (ELMs) with self-healing and evolvable functionalities. However, further development of ELMs is greatly hampered by the lack of engineerable nonpathogenic chassis and corresponding programmable endogenous biopolymers. Here, we describe a technological workflow for facilitating ELMs design by rationally integrating bioinformatics, structural biology and synthetic biology technologies. We first develop bioinformatics software, termed Bacteria Biopolymer Sniffer (BBSniffer), that allows fast mining of biopolymers and biopolymer-producing bacteria of interest. As a proof-of-principle study, using existing pathogenic pilus as input, we identify the covalently linked pili (CLP) biosynthetic gene cluster in the industrial workhorse Corynebacterium glutamicum. Genetic manipulation and structural characterization reveal the molecular mechanism of the CLP assembly, ultimately enabling a type of programmable pili for ELM design. Finally, engineering of the CLP-enabled living materials transforms cellulosic biomass into lycopene by coupling the extracellular and intracellular bioconversion ability.

Polyvalent s-block elements: A missing link challenges the periodic law of chemistry for the heavy elements.

The Periodic Law of Chemistry is one of the great discoveries in cultural history. Elements behaving chemically similar are empirically merged in groups G of a Periodic Table, each element with G valence electrons per neutral atom, and with upper limit G for the oxidation and valence numbers. Here, we report that among the usually mono- or di-valent s-block elements (G = 1 or 2), the heaviest members (87Fr, 88Ra, 119E, and 120E) with atomic numbers Z = 87, 88, 119, 120 form unusual 5- or 6-valent compounds at ambient conditions. Together with well-reported basic changes of valence at the end of the 6d-series, in the whole 7p-series, and for 5g6f-elements, it indicates that at the bottom of common Periodic Tables, the classic Periodic Law is not as straightforward as commonly expected. Specifically, we predict the feasible experimental synthesis of polyvalent [RaL-n] (n = 4, 6) compounds.

Cryo-EM structure of human HCN3 channel and its regulation by cAMP.

HCN channels are important for regulating heart rhythm and nerve activity and have been studied as potential drug targets for treating depression, arrhythmia, nerve pain, and epilepsy. Despite possessing unique pharmacological properties, HCN channels share common characteristics in that they are activated by hyperpolarization and modulated by cAMP and other membrane lipids. However, the mechanisms of how these ligands bind and modulate HCN channels are unclear. In this study, we solved structures of full-length human HCN3 using cryo-EM and captured two different states, including a state without any ligand bound and a state with cAMP bound. Our structures reveal the novel binding sites for cholesteryl hemisuccinate in apo state and show how cholesteryl hemisuccinate and cAMP binding cause conformational changes in different states. These findings explain how these small modulators are sensed in mammals at the molecular level. The results of our study could help to design more potent and specific compounds to influence HCN channel activity and offer new therapeutic possibilities for diseases that lack effective treatment.

Highly Stable 72-Nuclearity Nanocages for Efficient Synthesis of Aryl Nitriles via Ni/Cu Synergistic Catalysis.

Seeking noble-metal-free catalysts for efficient synthesis of aryl nitriles under mild conditions poses a significant challenge due to the use of hypertoxic cyanides or high-pressure/temperature NH3/O2 in conventional synthesis processes. Herein, we developed a novel framework 1 assembled by [Ni72] nanocages with excellent solvents/pH stability. To investigate the structure-activity relationship of catalytic performance, several isostructural MOFs with different molar ratios of Ni/Cu by doping Cu2+ into framework 1 (Ni0.59Cu0.41 (2), Ni0.81Cu0.19 (3), Ni0.88Cu0.12 (4), and Ni0.92Cu0.08 (5)) were prepared. Catalytic studies revealed that catalyst 3 exhibited remarkable performance in the synthesis of aryl nitriles, utilizing a formamide alternative to hypertoxic NaCN/KCN. Notably, catalyst 3 achieved an excellent TOF value of 9.8 h-1. Furthermore, catalyst 3 demonstrated its applicability in a gram-scale experiment and maintained its catalytic performance even after six recycling cycles, owing to its high stability resulting from significant electrostatic and orbital interactions between the Ni center and ligands as well as a large SOMO-LUMO energy gap supported by DFT calculations. Control experiments and DFT calculations further revealed that the excellent catalytic performance of catalyst 3 originated from the synergistic effect of Ni/Cu. Importantly, this work not only provides a highly feasible method to construct highly stable MOFs containing multinuclear nanocages with exceptional catalytic performance but also represents the first example of a heterogeneous catalyst for the synthesis of aryl nitriles using formamide as the cyanide source.

The plastid-localized lipoamide dehydrogenase 1 is crucial for redox homeostasis, tolerance to arsenic stress and fatty acid biosynthesis in rice.

Soil contamination with arsenic (As) can cause phytotoxicity and reduce crop yield. The mechanisms of As toxicity and tolerance are not fully understood. In this study, we used a forward genetics approach to isolate a rice mutant, ahs1, that exhibits hypersensitivity to both arsenate and arsenite. Through genomic resequencing and complementation tests, we identified OsLPD1 as the causal gene, which encodes a putative lipoamide dehydrogenase. OsLPD1 was expressed in the outer cell layer of roots, root meristem cells, and in the mesophyll and vascular tissues of leaves. Subcellular localization and immunoblot analysis demonstrated that OsLPD1 is localized in the stroma of plastids. In vitro assays showed that OsLPD1 exhibited lipoamide dehydrogenase (LPD) activity, which was strongly inhibited by arsenite, but not by arsenate. The ahs1 and OsLPD1 knockout mutants exhibited significantly reduced NADH/NAD+ and GSH/GSSG ratios, along with increased levels of reactive oxygen species and greater oxidative stress in the roots compared with wild-type (WT) plants under As treatment. Additionally, loss-of-function of OsLPD1 also resulted in decreased fatty acid concentrations in rice grain. Taken together, our finding reveals that OsLPD1 plays an important role for maintaining redox homeostasis, conferring tolerance to arsenic stress, and regulating fatty acid biosynthesis in rice.

Intrinsic microbial temperature sensitivity and soil organic carbon decomposition in response to climate change.

Soil microbes are essential for regulating carbon stocks under climate change. However, the uncertainty surrounding how microbial temperature responses control carbon losses under warming conditions highlights a significant gap in our climate change models. To address this issue, we conducted a fine-scale analysis of soil organic carbon composition under different temperature gradients and characterized the corresponding microbial growth and physiology across various paddy soils spanning 4000 km in China. Our results showed that warming altered the composition of organic matter, resulting in a reduction in carbohydrates of approximately 0.026% to 0.030% from humid subtropical regions to humid continental regions. These changes were attributed to a decrease in the proportion of cold-preferring bacteria, leading to significant soil carbon losses. Our findings suggest that intrinsic microbial temperature sensitivity plays a crucial role in determining the rate of soil organic carbon decomposition, providing insights into the temperature limitations faced by microbial activities and their impact on soil carbon-climate feedback.

Adsorption of active polymers on attractive nanoparticles.

The adsorption of active polymers on an attractive nanoparticle (NP) is studied using Langevin dynamics simulations. The active polymers consist of an active Brownian particle (ABP) at the head and a subsequent passive polymer chain. The ABP experiences an active force of magnitude Fa. The interactions between the active polymer and NP are modeled as Lennard-Jones potential with a strength εpn. We find the critical adsorption point εpn* increases with increasing the active force Fa. The increment of εpn*, denoted as Δεpn*, due to Fa can be expressed approximately as Δεpn* ∝ Fa2.5 for the restricted rotating active polymer (RRAP) where the rotation of the head ABP is restricted and Δεpn* ∝ Fa1.7 for the freely rotating active polymer (FRAP) where the ABP rotates freely. Meanwhile, the conformation of the adsorbed polymer, such as adsorbed trains on NP and the tail near the ABP, are also dependent on Fa. When the tail near the ABP is short, the adsorption is significantly affected by the active force. However, when the tail is long, the whole polymer can be viewed as a long tail stretched by the active force and unperturbed adsorption monomers. Simulation results show that the active force has a direct and significant effect on εpn* and the structure of the adsorbed active polymers.

Understanding the Electronic Structure and Chemical Bonding in the 2D Fullerene Monolayer.

Recently synthesized two-dimensional (2D) monolayer quasi-hexagonal-phase fullerene (qHPC60) demonstrates excellent thermodynamic stability. Within this monolayer, each fullerene cluster is surrounded by six adjacent C60 cages along an equatorial plane and is connected by both C-C single bonds and [2 + 2] cycloaddition bonds that serve as bridges. In this study, we investigate the stability mechanism of the 2D qHPC60 monolayer by examining the electronic structure and chemical bonding through state-of-the-art theoretical methodologies. Density functional theory (DFT) studies reveal that 2D qHPC60 possesses a moderate direct electronic band gap of 1.46 eV, close to the experimental value (1.6 eV). It is found that the intermolecular bridge bonds play a crucial role in enhancing the charge flow and redistribution among C60 cages, leading to the formation of dual π-aromaticity within the C60 sphere and stabilizing the 2D framework structure. Furthermore, we identify a series of delocalized superatom molecular orbitals (SAMOs) within the 2D qHPC60 monolayer, exhibiting atomic orbital-like behavior and hybridization to form nearly free-electron (NFE) bands with σ/π bonding and σ*/π* antibonding properties. Our findings provide insights into the design and potential applications of NFE bands derived from SAMOs in 2D qHPC60 monolayers.

Complexation of Hexavalent Neptunium(VI) with Oxydiacetic Acid and Its Amide Derivatives in Aqueous Solution: Spectrophotometry and DFT Calculations.

Unfolding the solution coordination chemistry of high-valent transuranium elements with the "CHON"-type ligands is important to understand the fundamental chemistry of actinides and to design more efficient extractants for partitioning of transuranium elements in advanced nuclear fuel cycles. Here, the complexation of a hexavalent neptunyl ion (NpO22+ or Np(VI)) with oxydiacetic acid (ODA) has been systematically investigated in comparison with its amide analogues N,N-dimethyl-3-oxa-glutaramic acid (DMOGA) and N,N,N',N'-tetramethyl-3-oxa-glutaramide (TMOGA) both experimentally and computationally. The formation of both 1:1 and 1:2 complexes between Np(VI) and the three ligands was identified by spectrophotometry, and their stability constants were obtained and compared with those of hexavalent U(VI) and Pu(VI). The corresponding bonding nature is elucidated by using energy decomposition analysis (EDA), electrostatic potential (ESP), ELF contours, and natural orbitals for chemical valence (NOCV) methods, which shows that the Np-O bonds are essentially ionic in character and the unoccupied 6d orbitals of Np play a key role in enhancing the covalent interactions between Np(VI) and the three ligands.

Translocation of two-dimensional active polymers through nanopores using Langevin dynamics simulations.

The translocation of polymers through nanopores is a complex process influenced by various factors. In this study, the translocation behavior of a two-dimensional active polymer chain, comprised of a head active Brownian particle (ABP) and a tail passive polymer chain, through a nanopore is studied using Langevin dynamics simulations. Results show that the effect of the self-propulsion force of the ABP on the translocation differs significantly from the driving force inside the pore for traditional polymer translocations. Specifically, the translocation time τ initially increases with increasing the magnitude fs of the self-propulsion force and then decreases with a further increase in fs. A small fs lowers the potential barrier for the translocation and thus promotes slow translocations, whereas a large fs directly pulls the polymer chain through the nanopore following the scaling relation τ ∝ fs-1. Moreover, two asymptotic scaling relations between τ and polymer length N, τ ∝ Nα, are found, with the exponent α of about 2.5 for small fs or long N and the exponent α of about 1.4 for short active polymers with large fs. We discover that the slow rotation of the ABP accelerates the translocation process.

Improved optimization for the neural-network quantum states and tests on the chromium dimer.

The advent of Neural-network Quantum States (NQS) has significantly advanced wave function ansatz research, sparking a resurgence in orbital space variational Monte Carlo (VMC) exploration. This work introduces three algorithmic enhancements to reduce computational demands of VMC optimization using NQS: an adaptive learning rate algorithm, constrained optimization, and block optimization. We evaluate the refined algorithm on complex multireference bond stretches of H2O and N2 within the cc-pVDZ basis set and calculate the ground-state energy of the strongly correlated chromium dimer (Cr2) in the Ahlrichs SV basis set. Our results achieve superior accuracy compared to coupled cluster theory at a relatively modest CPU cost. This work demonstrates how to enhance optimization efficiency and robustness using these strategies, opening a new path to optimize large-scale restricted Boltzmann machine-based NQS more effectively and marking a substantial advancement in NQS's practical quantum chemistry applications.

Synthesis and Characterization of U≡C Triple Bonds in Fullerene Compounds.

Despite decades of efforts, the actinide-carbon triple bond has remained an elusive target, defying synthesis in any isolable compound. Herein, we report the successful synthesis of uranium-carbon triple bonds in carbide-bridged bimetallic [U≡C-Ce] units encapsulated inside the fullerene cages of C72 and C78. The molecular structures of UCCe@C2n and the nature of the U≡C triple bond were characterized through X-ray crystallography and various spectroscopic analyses, revealing very short uranium-carbon bonds of 1.921(6) and 1.930(6) Å, with the metals existing in their highest oxidation states of +6 and +4 for uranium and cerium, respectively. Quantum-chemical studies further demonstrate that the C2n cages are crucial for stabilizing the [UVI≡C-CeIV] units through covalent and coordinative interactions. This work offers a new fundamental understanding of the elusive uranium-carbon triple bond and informs the design of complexes with similar bonding motifs, opening up new possibilities for creating distinctive molecular compounds and materials.

Identification of a novel cuproptosis-related gene signature for rheumatoid arthritis-A prospective study.

BACKGROUND: Rheumatoid arthritis (RA) is a multifactorial systemic autoimmune disease characterized by ongoing synovial inflammation, leading to the degradation of cartilage. Cuproptosis, as a newly characterized form of cell death, may influence RA progression by regulating immune cells and chondrocytes. This study sets out to identify the hub cuproptosis-related gene (CRG) associated with the pathogenesis of RA. METHODS: A series of bioinformatic analyses were performed to evaluate the expression score of CRGs and the immune infiltration landscape between RA and normal samples. The hub gene was screened through the correlation analysis of CRGs, and the interaction network between the hub gene and transcription factors (TFs) was constructed. Finally, the hub gene was validated through quantitative real-time polymerase chain reaction (qRT-PCR) of patient samples and cell experiments. RESULTS: Drolipoamide S-acetyltransferase (DLAT) was screened as the hub gene. Correlation analysis between the hub gene and immune microenvironment demonstrated that DLAT had the highest correlation with T follicular helper cells. Eight pairs of DLAT-TF interaction networks were constructed. Single-cell sequencing showed that CRGs were highly expressed in RA chondrocytes, and chondrocytes could be classified into three different subsets. qRT-PCR was used to validate the above results. Dlat knockdown in immortalized human chondrocytes led to significantly improved mitochondrial membrane potentials and reduced levels of intracellular reactive oxygen species (ROS), mitochondrial ROS and apoptosis. CONCLUSIONS: This study rudimentarily demonstrates the correlation between CRGs and immune cell infiltration in RA. The biomarker DLAT may provide comprehensive insights into the pathogenesis and drug targets of RA.

On the highest oxidation states of the actinoids in AnO4 molecules (An = Ac - Cm): A DMRG-CASSCF study.

Actinoid tetroxide molecules AnO4 (An = Ac - Cm) are investigated with the ab initio density matrix renormalization group (DMRG) approach. Natural orbital shapes are used to read out the oxidation state (OS) of the f-elements, and the atomic orbital energies and radii are used to explain the trends. The highest OSs reveal a "volcano"-type variation: For An = Ac - Np, the OSs are equal to the number of available valence electrons, that is, AcIII , ThIV , PaV , UVI , and NpVII . Starting with plutonium as the turning point, the highest OSs in the most stable AnO4 isomers then decrease as PuV , AmV , and CmIII , indicating that the 5f-electrons are hard to be fully oxidized off from Pu onward. The variations are related to the actinoid contraction and to the 5f-covalency characteristics. Combined with previous work on OSs, we review their general trends throughout the periodic table, providing fundamental understanding of OS-relevant phenomena.

Early-Stage Liquid Infiltration in Nanoconfinements.

Liquid infiltration is one of the commonly adapted flow mechanisms in microscale/nanoscale heat-transfer applications. The theoretical modeling of dynamic infiltration profile in the microscale/nanoscale requires a deep study, because the acting forces are entirely different from those of a large-scale system. Herein, a model equation is developed from the fundamental force balance at the microscale/nanoscale level, to capture the dynamic infiltration flow profile. Molecular kinetic theory (MKT) is used to predict the dynamic contact angle. Molecular dynamics (MD) simulations are performed to study the capillary infiltration in two different geometries. The infiltration length is computed from the simulation results. The model is also evaluated over surfaces having different surface wettability. The generated model provides a better estimation of the infiltration length, compared to the well-established models. The developed model is expected to aid in the designing of microscale/nanoscale devices where liquid infiltration plays a key role.

High-Molecular-Weight and Light-Colored Disulfide-Bond-Embedded Polyesters: Accelerated Hydrolysis Triggered by Redox Responsiveness.

Disulfide bonds have attracted considerable attention due to their reduction responsiveness, but it is crucial and challenging to prepare disulfide-bond-based polyesters by melt polycondensation. Herein, the inherently poor thermal stability of the S-S bond in melting polycondensation was overcome. Moreover, poly(butylene succinate-co-dithiodipropionate) (PBSDi) with a light color and high molecular weights (Mn values up to 84.7 kg/mol) was obtained. These polyesters can be applied via melt processing with Td,5% > 318 °C. PBSDi10-PBSDi40 shows good crystallizability (crystallinity 56-38%) and compact lamellar thickness (2.9-3.2 nm). Compared with commercial poly(butylene adipate-co-terephthalate) (PBAT), the elevated mechanical and barrier performances of PBSDi make them better packaging materials. For the degradation behavior, the disulfide monomer obviously accelerates the enzyme degradation but has a weaker effect on hydrolysis. In 0.1 mol/L or higher concentrations of H2O2 solutions, the oxidation of disulfide bonds to sulfoxide and sulfone groups can be realized. This process results in a stronger nucleophilic attack, as confirmed by the Fukui function and DFT calculations. Additionally, the greater polarity and hydrophilicity of oxidation products, proved by noncovalent interaction analysis, accelerate the hydrolysis of polyesters. Moreover, glutathione-responsive breakage, from polymers to oligomers, is confirmed by an accelerated decline in molecular weight. Our research offers fresh perspectives on the effective synthesis of the disulfide polyester and lays a solid basis for the creation of high-performance biodegradable polyesters that degrade on demand.

Biobased Biodegradable Copolyesters from 2,5-Thiophenedicarboxylic Acid: Effect of Aliphatic Diols on Barrier Properties and Degradation.

The demand for sustainable development has led to increasing attention in biobased polyesters due to their adjustable thermal and mechanical properties and biodegradability. In this study, we used a novel bioderived aromatic diacid, 2,5-thiophenedicarboxylic acid (TDCA) to synthesize a list of novel aromatic-aliphatic poly(alkylene adipate-co-thiophenedicarboxylate) (PAATh) copolyesters through a facile melt polycondensation method. PAAThs are random copolyesters with weight-average molecular weights of 58400 to 84200 g·mol-1 and intrinsic viscosities of 0.80 to 1.27 dL·g-1. All PAAThs exhibit sufficiently high thermal stability as well as the highest tensile strength of 6.2 MPa and the best gas barrier performances against CO2 and O2, 4.3- and 3.3-fold better than those of poly(butylene adipate-co-terephthalate) (PBAT). The biodegradability of PAAThs was fully evaluated through a degradation experiment and various experimental parameters, including residue weights, surface morphology, and molecular compositions. The state-of-the-art molecular dynamics (MD) simulations were applied to elucidate the different enzymatic degradation behaviors of PAAThs due to the effect of diols with different chain structures. The sterically hindered carbonyl carbon of the PHATh-enzyme complex was more susceptible to nucleophilic attack and exhibited a higher tendency to enter a prereaction state. This study has introduced a group of novel biobased copolyesters with their structure-property relationships investigated thoroughly, and the effect of diol components on the enzymatic degradation was revealed by computational analysis. These findings may lay the foundation for the development of promising substitutes for commercial biodegradable polyesters and shed light on their complicated degradation mechanisms.

Enhanced Hydrogen Bonds of the (H2O)n (n = 4-8) Clusters Confined in Uranyl Peroxide Cluster Na20(UO2)20(O2)30.

Water is a basic resource and an essential component of living organisms. It often exhibits some novel properties under confinement. The water clusters (H2O)n (n = 4-8) confined in the cavity of uranyl peroxide cluster Na20(UO2)20(O2)30 (U20) have been computationally investigated by using ab initio molecular dynamics (AIMD) simulations and density functional theory (DFT) calculations in this study. The results show that the confined water clusters can form hydrogen bonds with the internal oxygen atoms (Ouranyl) of U20, and their conformations changed significantly. The average lengths (2.553-2.645 Å) of hydrogen bonds in confined (H2O)n are shorter than those (2.731-2.841 Å) in the corresponding free water clusters. Moreover, these confined hydrogen bonds show better hydrogen bond patterns according to the quantified indices. The natural bond orbital (NBO) calculations determine that there is electron transferring from the U20 to its interior (H2O)n. It is the main reason for enhancing hydrogen bond interactions among the confined water molecules because their oxygen atoms are more negatively charged and their hydrogen atoms are more positively charged. The quantum theory of atoms in molecules (QTAIM) and interacting quantum atoms (IQA) analyses indicate that the confined hydrogen bonds are more covalent, based on the significant electron density ρ(r) and local energy density H(r) at the bond critical points (BCPs), and the stronger energies of interatomic exchange interactions (Vxc). These findings may help to promote the communication of confined water clusters and enrich the understating of confined hydrogen bonds.