The Current State of Silicone-Based Dielectric Elastomer Transducers.

Silicone elastomers are promising materials for dielectric elastomer transducers (DETs) due to their superior properties such as high efficiency, reliability and fast response times. DETs consist of thin elastomer films sandwiched between compliant electrodes, and they constitute an interesting class of transducer due to their inherent lightweight and potentially large strains. For the field to progress towards industrial implementation, a leap in material development is required, specifically targeting longer lifetime and higher energy densities to provide more efficient transduction at lower driving voltages. In this review, the current state of silicone elastomers for DETs is summarised and critically discussed, including commercial elastomers, composites, polymer blends, grafted elastomers and complex network structures. For future developments in the field it is essential that all aspects of the elastomer are taken into account, namely dielectric losses, lifetime and the very often ignored polymer network integrity and stability.

Adsorption and aqueous lubricating properties of charged and neutral amphiphilic diblock copolymers at a compliant, hydrophobic interface.

We have investigated the adsorption and lubricating properties of neutral and charged amphiphilic diblock copolymers at a hydrophobic polydimethylsiloxane (PDMS) interface in an aqueous environment. The diblock copolymers consist of a hydrophilic block of either neutral poly(ethylene glycol) (PEG) or negatively charged poly(acrylic acid) (PAA) and of a hydrophobic block of polystyrene (PS) or poly(2-methoxyethyl acrylate) (PMEA), thus generating PEG-b-X or PAA-b-X, where X block is either PS or PMEA. The molecular weight ratios were roughly 1:1 with each block ca. 5 kDa. Comparing the neutral PEG and charged PAA buoyant blocks with all other conditions identical, the former showed superior adsorption onto nonpolar, hydrophobic PDMS surfaces from a neutral aqueous solution. PEG-based copolymers showed substantial adsorption for both PS and PMEA as the anchoring block, whereas PAA-based copolymers showed effective adsorption only when PMEA was employed as the anchoring block. For PAA-b-PS, the poor adsorption properties are chiefly attributed to micellization due to the high interfacial tension between the PS core and water. The poor lubricating properties of PAA-b-PS diblock copolymer for a PDMS-PDMS sliding contact was well correlated with the poor adsorption properties. PAA-b-PMEA copolymers, despite their sizable amount of adsorbed mass, showed insignificant lubricating effects. When the charges of the PAA-b-PMEA diblock copolymers were screened by either adding NaCl to the aqueous solution or by lowering the pH, both the adsorption and lubricity improved. We ascribe the poor adsorption and inferior aqueous lubricating properties of the PAA-based diblock copolymers compared to their PEG-based counterparts mainly to the electrostatic repulsion between charged PAA blocks, hindering the facile formation of the lubricating layer under cyclic tribological stress at the sliding PDMS-PDMS interface.

Azobenzene polyesters used as gate-like scaffolds in nanoscopic hybrid systems.

The synthesis and characterisation of new capped silica mesoporous nanoparticles for on-command delivery applications is reported. Functional capped hybrid systems consist of MCM-41 nanoparticles functionalised on the external surface with polyesters bearing azobenzene derivatives and rhodamine B inside the mesopores. Two solid materials, Rh-PAzo8-S and Rh-PAzo6-S, containing two closely related polymers, PAzo8 and PAzo6, in the pore outlets have been prepared. Materials Rh-PAzo8-S and Rh-PAzo6-S showed an almost zero release in water due to steric hindrance imposed by the presence of anchored bulky polyesters, whereas a large delivery of the cargo was observed in the presence of an esterase enzyme due to the progressive hydrolysis of polyester chains. Moreover, nanoparticles Rh-PAzo8-S and Rh-PAzo6-S were used to study the controlled release of the dye in intracellular media. Nanoparticles were not toxic for HeLa cells and endocytosis-mediated cell internalisation was confirmed by confocal microscopy. Furthermore, the possible use of capped materials as a drug-delivery system was demonstrated by the preparation of a new mesoporous silica nanoparticle functionalised with PAzo6 and loaded with the cytotoxic drug camptothecin (CPT-PAzo6-S). Following cell internalisation and lysosome resident enzyme-dependent gate opening, CPT-PAzo6-S induced CPT-dependent cell death in HeLa cells.

Micropatterning of functional conductive polymers with multiple surface chemistries in register.

A versatile procedure is presented for fast and efficient micropatterning of multiple types of covalently bound surface chemistry in perfect register on and between conductive polymer microcircuits. The micropatterning principle is applied to several types of native and functionalized PEDOT (poly(3,4-ethylenedioxythiophene)) thin films. The method is based on contacting PEDOT-type thin films with a micropatterned agarose stamp containing an oxidant (aqueous hypochlorite) and applying a nonionic detergent. Where contacted, PEDOT not only loses its conductance but is entirely removed, thereby locally revealing the underlying substrate. Surface analysis showed that the substrate surface chemistry was fully exposed and not affected by the treatment. Click chemistry could thus be applied to selectively modify re-exposed alkyne and azide functional groups of functionalized polystyrene substrates. The versatility of the method is illustrated by micropatterning cell-binding RGD-functionalized PEDOT on low cell-binding PMOXA (poly(2-methyl-2-oxazoline)) to produce cell-capturing microelectrodes on a cell nonadhesive background in a few simple steps. The method should be applicable to a wide range of native and chemically functionalized conjugated polymer systems.

Synthesis of graft copolymers based on poly(2-methoxyethyl acrylate) and investigation of the associated water structure.

Graft copolymers composed of poly(2-methoxyethyl acrylate) are prepared employing controlled radical polymerization techniques. Linear backbones bearing atom transfer radical polymerization (ATRP) initiating sites are obtained by reversible addition-fragmentation chain transfer copolymerization of 2-methoxyethyl acrylate (MEA) and 2-(bromoisobutyryloxy)ethyl methacrylate (Br(i) BuEMA) as well as 2-hydroxyethyl methacrylate and Br(i) BuEMA in a controlled manner . MEA is then grafted from the linear macroinitiators by Cu (I)-mediated ATRP. Fairly high molecular weights (>120 000 Da) and low polydispersity indices (1.17-1.38) are attained. Thermal investigations of the graft copolymers indicate the presence of the freezing bound water, and imply that the materials may exhibit blood compatibility.

Polysulfone functionalized with phosphonated poly(pentafluorostyrene) grafts for potential fuel cell applications.

A multi-step synthetic strategy to polysulfone (PSU) grafted with phosphonated poly(pentafluorostyrene) (PFS) is developed. It involves controlled radical polymerization resulting in alkyne-end functional PFS. The next step is the modification of PSU with a number of azide side groups. The grafting of PFS onto PSU backbone is performed via the "click"-chemistry approach. In a final step, the PFS-grafts are subjected to the post phosphonation. The copolymers are evaluated as membranes for potential fuel cell applications through thermal analyses, water uptake, and conductivity measurements. The proposed synthetic route opens the possibility to tune copolymers' hydrophilic-hydrophobic balance to obtain membranes with an optimal balance between proton conductivity and mechanical properties.

Complex surface concentration gradients by stenciled "electro click chemistry".

Complex one- or two-dimensional concentration gradients of alkynated molecules are produced on azidized conducting polymer substrates by stenciled "electro click chemistry". The latter describes the local electrochemical generation of catalytically active Cu(I) required to complete a "click reaction" between alkynes and azides at room temperature. A stencil on the counter electrode defines the shape and multiplicity of the gradient(s) on the conducting polymer substrate, while the specific reaction conditions control gradient steepness and the maximum concentration deposited. Biologically active ligands including cell binding peptides are patterned in gradients by this method without losing their biological function or the conductivity of the polymer.

Gold nanoparticles protected with thiol-derivatized amphiphilic poly(epsilon-caprolactone)-b-poly(acrylic acid).

Amphiphilic poly(epsilon-caprolactone)-b-poly(acrylic acid) (HS-PCL-b-PAA) with a thiol functionality in the PCL terminal has been prepared in a novel synthetic cascade. Initially, living anionic ring-opening polymerization (ROP) of epsilon-caprolactone (epsilon-CL) employing the difunctional initiator, 2-hydroxyethyl 2-bromoisobutyrate, followed by esterification with 2,4-dinitrophenyl- or 4-monomethoxytrityl-protected mercaptoacetic acids (Prot-), provided well-defined PCL macroinitiators capped with protected thiols. The macroinitiators allowed atom transfer radical polymerization (ATRP) of tert-butyl acrylate (tBA) in a controlled fashion by use of NiBr2(PPh3)2 catalyst to produce Prot-PCL-b-PtBA with narrow polydispersities (1.17-1.39). Subsequent mild deprotection protocols provided HS-PCL-b-PAA. Reduction of a gold salt in the presence of this macroligand under thiol-deficient conditions afforded stable, aggregation-free nanoparticles, as evidenced from UV-vis spectroscopy and transmission electron microscopy (TEM), the latter revealed nanoparticles with a mean diameter of 9.0+/-3.1 nm.

Dendronized macromonomers for three-dimensional data storage.

A series of dendritic macromonomers have been synthesized and utilized as the photoactive component in holographic storage systems leading to high performance, low shrinkage materials.

Highly Branched Bio-Based Unsaturated Polyesters by Enzymatic Polymerization.

A one-pot, enzyme-catalyzed bulk polymerization method for direct production of highly branched polyesters has been developed as an alternative to currently used industrial procedures. Bio-based feed components in the form of glycerol, pentaerythritol, azelaic acid, and tall oil fatty acid (TOFA) were polymerized using an immobilized Candida antarctica lipase B (CALB) and the potential for an enzymatic synthesis of alkyds was investigated. The developed method enables the use of both glycerol and also pentaerythritol (for the first time) as the alcohol source and was found to be very robust. This allows simple variations in the molar mass and structure of the polyester without premature gelation, thus enabling easy tailoring of the branched polyester structure. The postpolymerization crosslinking of the polyesters illustrates their potential as binders in alkyds. The formed films had good UV stability, very high water contact angles of up to 141° and a glass transition temperature that could be controlled through the feed composition.

Stability of Asp(B28) Insulin Exposed to Modified and Unmodified Polypropylene.

Polypropylene (PP) plates have been modified with two different hydrophilic polymeric materials, poly(N,N-dimethylacrylamide) (poly(DMAAm)) and poly(poly(ethylene glycol)methacrylate) (poly(PEGMA)) in order to reduce insulin adsorption when the plates were exposed to insulin aspart (Asp(B28) insulin). The influence of surface modification on the chemical and physical stability of Asp(B28) insulin was evaluated by two chromatographic methods, size exclusion chromatography (SEC) and reverse phase high pressure liquid chromatography (RP-HPLC) and the Thioflavin T assay. A clear difference in the stability of Asp(B28) insulin was observed between the three tested surfaces. PP coated with poly(DMAAm) resulted in a poor chemical stability and a significantly improved physical stability compared with unmodified PP. In addition to this a lower phenol concentration was observed for the poly(DMAAm) coating. The results from the poly(PEGMA) coating looked very promising with respect to the stability of Asp(B28) insulin in comparison with the data from unmodified PP and the poly(DMAAm) coating. Two hydrophilic coatings have been tested and surprisingly a difference in Asp(B28) insulin stability was observed. Therefore, Asp(B28) insulin adsorption and stability will be influenced by more than the hydrophilicity of the surface.

RAFT copolymerization of itaconic anhydride and 2-methoxyethyl acrylate: a multifunctional scaffold for preparation of "clickable" gold nanoparticles.

RAFT copolymerization of 2-methoxyethyl acrylate and itaconic anhydride - a monomer derived from renewable resources - is carried out in a controlled fashion. The copolymer allows preparation of gold nanoparticles with abundant surficial carboxyl and alkyne functional groups that are dendronized via Cu(I)-mediated "click" reaction.

Modification of jute fibers with polystyrene via atom transfer radical polymerization.

Atom transfer radical polymerization (ATRP) was investigated as a method of covalently bonding polystyrene to jute (Corchorus capsularis) and as a possible approach to fiber composites with enhanced properties. Jute fibers were modified with a brominated initiator and subsequently ATRP modified to attach polystyrene and then examined using SEM, DSC, TGA, FTIR, XPS, elemental analysis, and Py-GC-MS. These techniques confirmed that polystyrene had been covalently bound to the fibers and consequently ATRP-modified jute fiber mats were used to prepare hot-pressed polystyrene composites. Composite specimens were tensile tested and fracture surfaces examined using SEM. Although SEM examination suggested different fracture modes between unmodified fiber and ATRP-modified samples, the tensile strength of modified samples was slightly lower on average than that of unmodified samples. For fiber composite applications, we conclude that further optimization of the ATRP method is required, possibly targeting higher and more uniform loading of polystyrene on the fibers.

Photodimerization in pyrimidine-substituted dipeptides.

Ten N(epsilon)-glycylornithineamide derivatives have been synthesized containing various N(alpha)-linked pyrimidine-1-ylacetyl groups which can undergo (2pi + 2pi) photodimerization on irradiation with UV light at 254 nm. The dimerization efficiency of the free and bound pyrimidine groups was compared in aqueous solution: it was dependent on the substitution of the pyrimidine ring. N(alpha),N(alpha')-bis-(uracil-1-ylacetyl)-(N(epsilon)-glycylornithineamide) and N(alpha),N(alpha')-bis-(5-bromouracil-1-ylacetyl)-(N(epsilon)-glycylornithineamide) were identified as possible candidates for optical data storage.

Photoinduced anisotropy in a family of amorphous azobenzene polyesters for optical storage.

We investigate parameters associated with optical data storage in a variety of amorphous side-chain azobenzene-containing polyesters denoted as E1aX. The polyesters possess a common cyano-substituted azobenzene chromophore as a side chain, but differ in their main-chain polyester composition. Seventeen different polymers from the E1aX family divided into four classes, depending on the type of the main-chain substituent (one-, two-, and three-ring aromatic or alicyclic) have been thoroughly investigated. Various parameters characterizing the photoinduced birefringence in these materials, such as the response time, thermal and light stability, and long-term stability under ambient light at room temperature have been measured. Each of these parameters is quantitatively represented and therefore it is possible to make a clear comparison between the properties of the polymers. The results indicate that the long-term stability at ambient temperature is closely related to the thermal stability of the photoinduced birefringence. A strong correlation has also been found between the response time and the stability of the induced anisotropy toward illumination with unpolarized white light. One of the classes of E1aX polymers characterized by two-ring aromatic substituent in the main chain is a good candidate for optical data storage media. A recording energy of approximately 2 J/cm2 is sufficient to induce high refractive-index modulations of deltan = 0.13 in these materials, which is retained even at elevated temperatures (>130 degrees C). Long-term stability of greater than one year for the induced anisotropy has also been achieved.