A novel methodology for stabilization of silver nanoparticles on cotton, nylon and cotton/nylon fabrics using chitosan and triethyl orthoformate for enhanced and elongated antibacterial performance.

In the present study, the commercially available three different fabrics cotton, nylon and cotton/nylon were modified by chitosan and silver nanoparticles using a crosslinker triethyl orthoformate (TEOF). Resulted cotton­silver (Ag-Cs-Cot), nylon­silver (Ag-Cs-Nyl) and cotton-nylon silver (Ag-Cs-Cot-Nyl) fabrics showed significant anti-bacterial activity even after 50 washing cycles. Silver nanoparticles were prepared by reducing silver nitrate through sodium borohydride at 0 °C. In FTIR spectra the peak at near 1650 cm-1 confirmed that TEOF mediated attachment of chitosan with fabrics (due to C=N) and the stretching of secondary amine near the 3375 cm-1 indicated the silver attachment to the amine group of the chitosan. In Scanning Electron Microscope (SEM) images smooth surfaces of fabrics without any damage by modification process were observed. The antibacterial activity was Analyzed by agar diffusion and broth dilution assays against Escherichia coli and Staphylococcus aureus bacterial strains and results showed 90% bacterial inhibition against E. coli and 89% bacterial inhibition against S. aureus. For testing the antibacterial durability, the modified fabrics were washed with non-ionic detergent (10g/l) for 15 minutes under aggressive stirring (100 rpm) at room temperature. The modified fabrics retained antibacterial activity over the 50 washing cycles. Finally, the commercial potential of cotton-silver fabric was evaluated by stitching it with the socks of football players and interestingly results showed that the modified fabric on the socks showed more than 90% bacterial inhibition as compared to the plain fabric after 70 minutes of playing activity.

Synthesis and characterization of cellulose/hydroxyapatite based dental restorative composites.

The aim of this study was an in-situ synthesis of hydroxyapatite (HA) on cellulose fibers to be used as a new reinforcing agent for dental restorations. The microwave irradiation method was used for synthesis and the materials were characterized with analytical techniques. The prepared dental resin composites were mechanically tested by a universal testing machine and electrodynamic fatigue testing system. FTIR, XRD, SEM/EDS analysis confirmed the successful synthesis of HA on cellulose fibers. The Alamar blue biocompatibility assay showed more than 90% cell viability for the prepared cellulose/HA. The mechanical properties of resin composites improved with cellulose content from 30 wt.% to 50 wt.% in the polymer matrix. Substantially, increasing the cellulose/HA content from 40% to 50% improved the mechanical properties. The results suggested that HA could be successfully synthesized on cellulose fibers using microwave irradiation and contributed to improving the mechanical properties of dental resin composites.

Electrospun Microbial-Encapsulated Composite-Based Plasticized Seed Coat for Rhizosphere Stabilization and Sustainable Production of Canola ( Brassica napus L.).

Plant-growth-promoting bacteria show promises in crop production; nevertheless, innovation in their stable delivery is required for practical use by farmers. Herein, the composite of poly(vinyl alcohol)/poly(vinylpyrrolidone) plasticized with glycerol and loaded with the microbial consortium ( Bacillus subtilis plus Seratia marcescens) was fabricated and engineered onto canola ( Brassica napus L.) seed via electrospinning. Scanning electron microscopy showed that the biocomposite is a one-dimensional membrane, which encapsulated microbes in a multilayered nanostructure, and their interfacial behavior between microorganism and seed is beneficial for safer farming. A universal testing machine and thermogravimetric analysis demonstrated that the biocomposite holds sufficient thermomechanical properties for stable handling and practical management. A spectroscopic study resolved the living hybrid-polymer structure of the biocomposite and proved the plasticizing role of glycerol. A swelling study supports the degradation of the biocomposite in the hydrophilic environment as a result of the leaching of the plasticizer, which is important for the sustained release of microbial cells. A shelf life study supported that the biocomposite seed coat placed a threshold level of microbes [5.675 ± 0.48 log10 colony forming units (CFU)/seed] and maintained their satisfactory viability for 15 days at room temperature. An antifungal and nutrient-solubilizing study supported that the biocomposite seed coat could provide opportunities to biocontrol diseases and improve nutrient acquisition by the plant. A pot study documents the better performance of the biocomposite seed coat on seed germination, seedling growth, leaf area, plant dry biomass, and root system. A chemical and microbial study demonstrated that the biocomposite seed coat improved the effectiveness of the bioinoculant in the root-soil interface, where they survive, flourish, and increase the nutrient pool status. In particular, this study presents advances in the fabrication of the biocomposite for encapsulation, preservation, sustained release, and efficacious use of microorganisms onto seeds for precision farming.

Ionic liquid as a potential solvent for preparation of collagen-alginate-hydroxyapatite beads as bone filler.

In this study, collagen/alginate/hydroxyapatite beads having different proportions were prepared as bone fillers for the restoration of osteological defects. Ionic liquid was used to dissolve the collagen and subsequently the solution was mixed with sodium alginate solution. Hydroxyapatite was added in different proportions, with the rationale to enhance mechanical as well as biological properties. The prepared solutions were given characteristic bead shapes by dropwise addition into calcium chloride solution. The prepared beads were characterized using FTIR, XRD, TGA and SEM analysis. Microhardness testing was used to evaluate the mechanical properties. The prepared beads were investigated for water adsorption behavior to ascertain its ability for body fluid uptake and adjusted accordingly to the bone cavity. Drug loading and subsequently the antibacterial activity was investigated for the prepared beads. The biocompatibility was assessed using the hemolysis testing and cell proliferation assay. The prepared collagen-alginate-HA beads, having biocompatibility and good mechanical properties, have showed an option of promising biologically active bone fillers for bone regeneration.

Hydroxypropylmethyl cellulose (HPMC) crosslinked chitosan (CH) based scaffolds containing bioactive glass (BG) and zinc oxide (ZnO) for alveolar bone repair.

The success of a dental implant relies on the presence of an optimal alveolar ridge. The aim of this study was to fabricate HPMC crosslinked chitosan based scaffolds for alveolar bone repair. Our results indicated that HPMC crosslinked CH/BG foams presented better morphological structure (132-90.5 µm) and mechanical responses (0.451 MPa with 100 mg BG) as confirmed by SEM analysis and fatigue testing respectively. Cytotoxicity analysis at day 2, 4 and 8 demonstrated that all composites were non-toxic and supported cellular viability. Calcein AM/propidium iodide staining, Hoechst nuclear staining and cell adhesion assay reiterated that scaffolds supported pre-osteoblast cell growth, adhesion and proliferation. Differentiation potential of pre-osteoblast cells was enhanced as confirmed by alkaline phosphate assay. Furthermore, loss of S. aureus viability as low as 35% was attributed to synergistic effects of components. Overall, our results suggest that HPMC crosslinked scaffolds are potential candidates for alveolar bone repair.

Chitosan/hydroxyapatite (HA)/hydroxypropylmethyl cellulose (HPMC) spongy scaffolds-synthesis and evaluation as potential alveolar bone substitutes.

Alveolar bone loss is associated with infections and its augmentation is a pre-requisite for the success of dental implants. In present study, we aim to develop and evaluate novel freeze dried doxycycline loaded chitosan (CS)/hydroxyapatite (HA) spongy scaffolds where hydroxypropylmethyl cellulose (HPMC) was added as a crosslinker. Scaffolds displayed compressive strength of 14MPa/cm3 and 0.34 as elastic response. The interconnected pore diameter was 41-273µm, favorably provided the template supporting cells and transport. An overall 10% degradation was seen after 14day's studies at pH 7.4 in PBS. Doxycycline hyclate, a frequently used drug to counter oral infections, demonstrated an initial burst release (6-8h), followed by a sustain release profile for the remaining 64h. CS/HA/HPMC scaffolds were nontoxic and promoted pre-osteoblast cell viability as seen with live/dead calcein staining after 24h where scaffolds with 10% and 25% HPMC by weight of scaffold had more viable cells. Scaffolds with 10%, 20% and 25% HPMC by weight of scaffold showed efficient cellular adhesion as seen in scanning electron microscopy images (day 8) indicating that pre-osteoblast cells were able to adhere well on the surface and into the porous structure via cytoplasmic extensions. Hoechst 33258 nuclear staining at day 2 and 8 indicated cell proliferation which was further supported byMTT assay at day 2, 4 and 8. Although all scaffolds supported pre-osteoblast cell viability, alkaline phosphatase (ALP) staining demonstrated that upon induction, differentiation was pronounced in case of scaffolds with 10% HMPC scaffolds. Conclusively, these materials having all the required mechanical and biological properties are potential candidates for alveolar bone regeneration.

Effect of calcium hydroxide on mechanical strength and biological properties of bioactive glass.

In this manuscript for the first time calcium hydroxide (Ca(OH)2) has been used for preparation of bioactive glass (BG-2) by co-precipitation method and compared with glass prepared using calcium nitrate tetrahydrate Ca(NO3)2·4H2O (BG-1), which is a conventional source of calcium. The new source positively affected physical, biological and mechanical properties of BG-2. The glasses were characterized by Fourier transform infrared (FTIR), X-Ray Diffractometer (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis/Differential Scanning Calorimetry (TGA-DSC), BET surface area analysis and Knoop hardness. The results showed that BG-2 possessed relatively larger surface properties (100m(2)g(-1) surface area) as compared to BG-1 (78m(2)g(-1)), spherical morphology and crystalline phases (wollastonite and apatite) after sintering at lower than conventional temperature. These properties contribute critical role in both mechanical and biological properties of glasses. The Knoop hardness measurements revealed that BG-2 possessed much better hardness (0.43±0.06GPa at 680°C and 2.16±0.46GPa at 980°C) than BG-1 (0.24±0.01 at 680°C and 0.57±0.07GPA at 980°C) under same conditions. Alamar blue Assay and confocal microscopy revealed that BG-2 exhibited better attachment and proliferation of MG63 cells. Based on the improved biological properties of BG-2 as a consequent of novel calcium source selection, BG-2 is proposed as a bioactive ceramic for hard tissue repair and regeneration applications.