Retention of methyl iodide on metal and TEDA impregnated activated carbon using indigenously developed setup.

Removal of methyl iodide (CH3I) from the air present within nuclear facilities is a critical issue. In case of any nuclear accident, there is a great need to mitigate the radioactive organic iodide immediately as it accumulates in human bodies, causing severe consequences. Current research focuses on removing organic iodides, for which the surface of activated carbon (AC) was modified by impregnating it with different metals individually, i.e. Ag, Ni, Zn, Cu and with the novel combination of these four metals (AZNC). After the impregnation of metals, triethylenediamine (TEDA) was coated on metal impregnated activated carbon (IAC) surface. The adsorption capacity of the combination of four metals IAC was found to be 276 mg/g as the maximum for the trapping of CH3I. Whereas TEDA-metal impregnation on ACs enhanced the removal efficiency of CH3I up to 352 mg/g. After impregnation, adsorption capacity of AZNC and AZNCT is significantly higher as compared to AC. According to the finding, t5% of AZNCT IAC is 46 min, which is considerably higher than the t5% of other tested adsorbents. According to isotherm fitting data, Langmuir isotherm was found superior for describing CH3I sorption onto AC and IACs. Kinetics study shows that pseudo second order model represented the sorption of CH3I more accurately than the pseudo first order. Thermodynamic studies gave negative value of ΔG which shows that the reaction is spontaneous in nature. Based on the findings, AZNCT IAC appears to have a great potential for air purification applications in order to obtain clean environment.

Evaluation of various soaking agents as a novel tool for pesticide residues mitigation from cauliflower (Brassica oleracea var. botrytis).

The increasing use of pesticides for boosting the yield of agricultural crops also impart toxic residues which ultimately extend to numerous physiological disorders upon consumption. The present study was designed as an effort to assess the reduction potential of various chemical solutions and to minimize the pesticide residues in cauliflower (Brassica oleracea var. botrytis). The samples were soaked in various solutions along with tap water to mitigate pesticide residues. Afterwards, the extracted supernatant was passed through column containing anhydrous sodium sulfate trailed by activated carbon for clean-up. Eluents were first evaporated and then completely dried under gentle stream of Nitrogen. Finally, the residues were determined using gas chromatography equipped with electron capture detector (GC-ECD). Results revealed the highest reduction of endosulfan, bifenthrin and cypermethrin residues with acetic acid (10 %) was 1.133 ± 0.007 (41 %), 0.870 ± 0.022 (60 %) and 0.403 ± 0.003 (75 %), respectively among the tested solutions. However, simple tap water treatment also resulted in 0.990 ± 0.02 (12 %), 1.323 ± 0.015 (14 %) and 1.274 ± 0.002 (21 %) elimination of endosulfan, bifenthrin and cypermethrin residues, respectively. Moreover, among various solutions, acetic acid depicted maximum reduction potential followed by citric acid, hydrogen peroxide, sodium chloride and sodium carbonate solutions. The percent reduction by various solutions ranged from 12 to 41, 14 to 60 and 21 to 75 % for the elimination of endosulfan, bifenthrin and cypermethrin residues, respectively.

Rapid Method for Quantification of Iron (Fe+3) from Ferrazone (NaFe-EDTA) in Fortified Wheat Flour.

Conventional methods for quantifying the added iron in wheat flour are time-consuming and costly. A rapid method (Time/Sample: 95 min) was developed by modifying the conventional standard method (Time/Sample: 560 min) and validated. Linearity and linear regression of the rapid method presented excellent correlation coefficient (R2) values (0.9976 to 0.9991), which were close to 1, while the limits of agreement (LOA) were in the range of -0.01 to 0.06 mg/kg. The limits of detection (LOD)/specificity and limits of quantitation (LOQ)/sensitivity values were found to be 0.03 and 0.09 mg/kg, respectively. The rapid method was subjected to validation, wherein the precision of intra-assay, inter-assay, and inter-person was determined to be within the range of 1.35-7.25%. These results indicate a high level of accuracy and precision of the method. The percent relative standard deviation (RSD) for recoveries at varying spiking levels, that is, 5, 10, and 15 mg/kg, was determined at 1.33 lying far below the upper limit of acceptability (RSD < 20). Overall, the developed rapid method can be sustainably alternate for conventional methods owing to its ability to produce accurate, precise, robust, and reproducible results.

Impregnation on activated carbon for removal of chemical warfare agents (CWAs) and radioactive content.

Nuclear, biological, and chemical warfare (NBC) agents cause an inevitable threat to defense forces and civilians. Exposure to these toxic agents causes a lot of damage to lives. One can avoid the damage of these toxic agents by taking appropriate preventive measures. Respiratory protection is obviously necessary when military personnel or civilians get bounded by such type of noxious situation as contaminant-free air is then required for breathing and it can only be provided by means of a proper gas mask and relevant canister. In purification of contaminated atmospheres, activated carbon has so far met with outstanding success. It removes toxic chemicals either by chemical or physical adsorption from the contaminated air. When any toxic chemicals get adsorbed on the modified impregnated carbon's surface, they usually adsorb there by means of chemical reactions. Destruction of adsorbed toxic substances is expected by such a reactive carbon. In this perspective, an attempt has been made to review the literature from past decades on the removal of toxic chemical warfare agents (CWAs) and radioactive content from air stream in case of any nuclear, biological, and chemical attack by selectively modifying or impregnating the activated carbon surface. This review also covers some important adsorption properties of materials being used in gas mask filters for effective removal of chemicals from airstream. The probable removal mechanisms of various chemical warfare agents and radioactive content have also been reviewed.