Accuracy of impression scan bodies for complete arch fixed implant-supported restorations.

STATEMENT OF PROBLEM: Despite the extensive studies on and comparisons of different implant impression techniques for completely edentulous patients, studies on novel techniques that combine conventional impression making with digital scanning are lacking. PURPOSE: The primary aim of this study was to compare the accuracy of the impression scan body technique with conventional impression making and digital scanning for a completely edentulous mandibular arch. The secondary aim was to assess the relationship between different implant angulations and interimplant distances in relation to the recording accuracy. MATERIAL AND METHODS: An edentulous mandibular definitive cast (control) was designed with 5 implants placed at different angles and interimplant distances. Three recording techniques were tested: a conventional impression with splinted copings (conventional) (n=15), an impression scan body technique where impression scan bodies were attached to the splinted impression copings in a conventional elastomeric impression and then digitally scanned with an extraoral scanner (n=15), and an intraoral digital scanning technique (digital) (n=15). For comparison, the definitive cast and the conventional impression stone casts were digitized into standard tessellation language (STL) datasets using the extraoral scanner. The 3-dimensional (3D) deviations between the 3 test groups and the control were calculated by superimposing the STL datasets. The 3D deviations from the control were compared by using the Kruskal-Wallis test followed by the Dunn post hoc test (α=.05). The Mann-Whitney test was used to investigate the effect of implant angulation and interimplant distance on impression accuracy (α=.05). RESULTS: The conventional splinted-coping impression technique showed a mean 3D deviation of 0.408 mm. The impression scan body and intraoral digital scan showed similar mean 3D deviations, 0.219 mm and 0.257 mm, respectively (P=.334). Both techniques showed significantly lower 3D deviations than the conventional technique (P<.001). Implants at an angle of 5 degrees and 10 degrees showed a statistically significant difference (P=.010) with mean 3D deviations of 0.340 mm and 0.396 mm, respectively. Implants with 5-mm and 10-mm interimplant distance showed a significant difference (P<.001) with mean 3D deviations of 0.301 mm and 0.423 mm, respectively. CONCLUSIONS: The impression scan body technique is comparable with intraoral digital scanning for a completely edentulous arch. Increased implant angulation and increased interimplant distance significantly reduced the accuracy of implant impression making or scanning.

Efficacy of bisphosphonates in detection of early enamel caries using NIR fluorescence imaging and inhibition of caries progression.

NIR fluorescence imaging using bisphosphonate-Indocyanine green has been indicated for early interproximal caries detection. This study assessed diagnostic accuracy of caries detection by NIR fluorescence imaging with OsteoSense 750® (OS750) in vitro and ex vivo, and to analyze the therapeutic efficacy of a bisphosphonate (Etidronate) in inhibiting enamel caries progression in vitro. Methods: Four experiments were conducted using extracted human teeth; 1) to calculate the infiltration rate of OS750 into interproximal white spot lesions using fluorescence microscope, 2) to assess diagnostic accuracy of interproximal natural white spot lesions using desktop NIR fluorescence imaging device in vitro setting, 3) to assess diagnostic accuracy of artificially created deeper enamel carious lesion (0.5 mm~1.0 mm) using NIR fluorescence image through the head-mount display in ex vivo setting, 4) to compare the progression on the enamel caries lesions treated by Etidronate, NaF and distilled-water. Diagnostic accuracy was analyzed using sensitivity, specificity and receiver operating curves (ROC). The caries progression was calculated with micro-CT and was statistically analyzed using a two-way ANOVA and the Tukey HDS post-hoc test. Results: 1) The infiltration rate of OS750 was 101.83% ± 8.66 (Min: 90.10%, Max: 133.94%). 2) The average of sensitivity and specificity in vitro setting experiments were 86.7% ± 4.4% and 70% ± 11%, respectively. The average of area under the ROC curves (AUC) was 0.883 ± 0.059 indicating excellent performance. 3) The mean sensitivity and specificity in ex vivo setting was 82.97% ± 15% and 76.78% ± 13.27% respectively. 4) The carious lesion volume treated by Etidronate was significantly smaller at post treatment-1 (p<0.05) and treatment-2 (p<0.01) than the control. There was no significant difference in lesion volume in the Etidronate and NaF group at the time point of post treatment-1. Conclusion: This study suggests that bisphosphonates contribute to both early diagnosis of enamel caries and inhibition of caries progression.

Establishment of perpendicular protrusion of type I collagen on TiO2 nanotube surface as a priming site of peri-implant connective fibers.

Natural teeth are supported by connective tissue collagen fibers that insert perpendicularly in the tooth cementum. Perpendicular insertion plays an important role in the maintenance of the junction between the oral epithelium and the periodontal connective tissue. Most titanium dental implant surfaces have no micro or macro structure to support perpendicularly oriented collagen attachment. Without this tight biologic seal to resist bacterial invasion and epithelial downgrowth, progressive bone loss in peri-implantitis is seen around dental implants. The purpose of this study was to establish the perpendicularly oriented collagen attachment to titanium oxide nanotube (TNT), and to assess its binding stability. TNT was prepared on the titanium-surface by anodization. Scanning electron microscopy (SEM) showed a regularly aligned TNT with an average 67 nm-diameter when anodized at 30 V for 3 h. Subsequently, collagen type I (CoI) was electrophoretically fused to anodic TNT in native polyacrylamide gel system where negatively charged CoI-C term was perpendicularly navigated to TNT. SEM and atomic force microscopy (AFM) were used to analyze CoI on the TiO2 and TNT surface. Several tens of nanometers of CoI protrusion were recorded by AFM. These protrusions may be long enough to be priming sites for cell-secreted CoI. CoI laid parallel to the titanium surface when fused by a chemical linker. Binding resistance of CoI against drastic ultrasonication was measured by Fourier-transform infrared spectroscopy attenuated total reflection (FTIR-ATR). The electrophoretically fused CoI in the titanium nanotube (TNT-CoIEPF) showed the significantly greatest binding resistance than the other groups (P < 0.01, a 1-way ANOVA and Tukey HSD post hoc test). Furthermore, TNT-CoIEPF surface rejected epithelial cell stretching and epithelial sheet formation. Chemically linked horizontal CoI on titanium oxide (TiO2) facilitated epithelial cell stretching and sheet formation.

Knowledge and Practice of Oral Cancer Screening in Teaching Faculty-Comparison of Specialty and Year of Clinical Experience.

The purpose of this study was to assess the knowledge, practice, confidence, and perceived barriers to oral cancer screening among teaching faculty in Japan. Results were compared by specialist as well as years of clinical experience. A 25-question survey was used to assess the oral cancer screening practices of faculty dentists at Iwate Medical University, School of Dental Medicine, the only dental school located in the northeast (Tohoku) region of Japan. The study was approved by the Institutional Review Board of Iwate Medical University. The response rate was 83% (n = 110, 71.8% were male). This survey revealed that only 43.6% of the dentists performed oral cancer screening frequently (always or usually) at the initial appointment, and there was no significant differences between specialists and clinical experience. Visual inspection of the oral cavity was the primary screening method, but the frequency and content of the examination (TMJ and tonsil) was significantly different between specialties. A history of cancer and tobacco use motivated providers to perform an examination and was significantly different between various specialists and clinically experienced providers. In contrast, HPV and alcohol consumption were a weak motivator. The confidence level of providers on their examination knowledge/skills was poor, especially among junior faculty. More than 80% of junior faculty indicated a lack of knowledge/skills as a major barrier.

A prospective clinical trial to assess the optical efficacy of pink neck implants and pink abutments on soft tissue esthetics.

OBJECTIVE: The purpose of this prospective, randomized, controlled, multicenter clinical study was to analyze the optical effects of an anodized pink colored implant shoulder/abutment system in the peri-implant mucosa of immediately placed dental implants. MATERIALS AND METHOD: Forty subjects with a restoratively hopeless tooth in the maxillary esthetic zone, were recruited and randomized to receive either a pink-neck implant, or a conventional gray implant. All patients received an immediate implant and immediate provisional and two identical CAD/CAM titanium abutments with different surface colors: pink and gray, and one zirconia all-ceramic crown. The color of the peri-implant mucosa was measured using a dental spectrophotometer and analyzed using CIELAB color system. RESULTS: The overall color difference between the peri-implant mucosa with a pink abutment and a gray abutment was ΔE = 4.22. Patients with gray implants presented a color change of ΔE = 3.86-4.17 with this abutment change, while patients with pink implants had a color change of ΔE = 3.84-4.69. The peri-implant mucosa with a pink abutment was significantly more red when compared with a gray abutment (P ≤ .01). CONCLUSIONS: When a pink abutment was used, there is a significant color change of the peri-implant mucosa that is above the detectable color threshold. CLINICAL SIGNIFICANCE: Esthetic outcomes are important for the success of implant treatment of maxillary anterior implants. The phenomenon of the gray color of a dental implant and abutment shining through the peri-implant mucosa has been documented in the literature. The objective of this study was to assess the optical effect of an anodized pink-neck implant and a pink abutment on the color of peri-implant mucosa. This study demonstrates that using pink-neck implant and a pink abutment would contribute positively to the overall esthetic outcome for an anterior implant.

The Effect of a Toothbrush Handle Design in Combating Microbial Contamination.

OBJECTIVES: This study aims to assess the difference in microbial contamination of a toothbrush with a smooth handle versus a toothbrush with a grooved handle design. METHODS: Twenty-six volunteers were randomized into two groups. The first group used a smooth handle toothbrush for two months, followed by a grooved handle toothbrush for two months. The second group had the order reversed. Following the two-month use, the toothbrushes were submitted for microbial analysis. Effect size, as well as Wilcoxon signed-rank test were used to calculate the differences between total colony count, bacterial DNA, and endotoxin levels from the two toothbrush handle types. RESULTS: There was no significant difference in colony count between the smooth (mean 580 CFU/mL, SD 1,684 CFU/mL) and grooved (mean 19,059 CFU/mL, SD 80,972 CFU/mL) handles (p = 0.12). Total DNA count was significantly less (p = 0.01) on the smooth handle (mean 68,038 RFU/mL, SD 81,659) compared to the grooved handle (mean 209,312 RFU/mL, SD 257,169 RFU/mL). Endotoxin levels were significantly less (p = 0.01) on the smooth handle (mean 0.16 EU/mL, SD 0.30 EU/mL) compared to the grooved handle (mean 0.43 EU/mL, SD 0.49 EU/mL). CONCLUSIONS: The smooth handle toothbrush had significantly less bacterial contamination compared to the grooved handle toothbrush, as measured by total DNA count and endotoxin levels.

Identification of putative bone anabolic peptides targeting adherent plasma membrane.

Bone matrix provides unknown essential cues for osteoblast lineage cells to develop, grow, repair and remodel bones via adherent plasma membrane. Because of its tight sealing with bone matrix in vivo and culture surface in vitro as well, the adherent plasma membrane has been unveiled target of investigation to date. Herein, we report a new approach to explore the adherence plasma membrane of osteoblasts with biofunctional peptide candidates in a bacterial peptide library. To accomplish this, human osteoblast like hFOB 1.19 cells were cultured on porous filter with 8 µm pore through which bacterial peptides were allowed to meet the membrane for affinity selection. The affinity-selected peptides were coated on culture plate to further evaluate their influence on osteoblastic cell adhesion, as well as expressions of osteoblast differentiation markers, alkaline phosphatase and osteocalcin. Finally, the serial screenings identified two prominent active peptides that enhanced the differentiation markers nearly to the same level as a control peptide of bone morphogenetic protein-2. Osteogenic activity is expected for the peptides when immobilized on bone implant surface.

Assessing the accuracy of computer color matching with a new dental porcelain shade system.

STATEMENT OF PROBLEM: In a previous study, a novel computer color matching system for dental ceramic restoration was developed, and 21 new shades were established. Theoretically, a natural tooth color can be accurately reproduced by combining 2 or 3 ceramic mixtures from the database of 21 new shades. PURPOSE: The purpose of this study was to test the use of these shades in conjunction with the computer color matching system to determine their ability to accurately reproduce the body color of 29 shade tabs from a shade guide (VITAPAN 3D-Master). MATERIAL AND METHODS: Disks of 21 reference shades were prepared with porcelain (Cerabien CZR) and polished to 1.0 mm thickness. A spectrophotometer was used to measure the reflectance values from 380 to 780 nm for each disk; the scattering coefficient and absorption coefficient were determined. By using the reflectance values and the scattering and absorption coefficients, the computer color matching program generated porcelain prescriptions incorporating proportions from the 21 reference shades to reproduce the shade tabs. Disks were fabricated from the prescriptions, polished to 1.0 mm thickness, then placed over a zirconia core plate and measured with the spectrophotometer. The color differences (ΔE*) between the shade tabs and the corresponding ceramic disks were calculated. Statistical analysis was performed with the 1-sample t test. RESULTS: The ΔE* values between computer color matching specimens and the target shade tabs varied from 0.5 to 1.9, with an average ΔE* of 1.3, which was significantly less than the clinically detectable ΔE* threshold of 1.6 (P<.001). CONCLUSIONS: The computer color matching system with the established 21 new shades is accurate and effective for reproducing tooth shades.

Microscopic in-situ analysis of the mucosal healing around implants treated by protease activated receptor 4-agonist peptide or perpendicularly protruded type I collagen in rats.

Enhanced mucosal sealing around titanium implants can reduce complications such as peri-implantitis. The present study aims to investigate the mucosal healing at the early stage around the protease activated receptor 4-agonist peptide (PAR4-AP)- or perpendicularly protruded type I collagen (pCol)-treated titanium implants. A total of 72 implants were placed in 36 rats in the study. Following extractions, two tissue-level implants among the following three different surfaces, PAR4-AP-coated (PAR4 group, n = 24), pCol-treated (pCol group, n = 24) and non-treated (control group, n = 24) ones, were placed in the maxillae of each rat based on a split-mouth design. The specimens retrieved at 8 h (n = 8 per group), 3 days (n = 8 per group), and 2 weeks (n = 8 per group), were immunostained and tissue-cleared, and the signals of laminin-5 and collagen fibers were observed under multiphoton microscopy. Statistical analyses were performed using linear mixed model with post hoc tests to compare differences between the groups. While there was no intergroup difference at 8 h, the laminin-5 at 3 days was more abundant near the PAR4-group-surface, and its area was significantly larger in the PAR4 group (0.0204 ± 0.0194 mm2 ) than the control (0.0019 ± 0.0025 mm2 , p = .001) and pCol (0.0023 ± 0.0022 mm2 , p < .001) groups. The pCol group showed a significantly larger area of collagen fibers (0.0230 ± 0.0148 mm2 ) compared to the control (0.0035 ± 0.0051 mm2 , p = .002) and PAR4 (0.0031 ± 0.0057 mm2 , p < .001) groups at 3 days. At 3 days and 2 weeks, the collagen fiber orientation of the pCol group showed a more perpendicular manner compared to the control and PAR4 groups. The signal of basal lamina and collagen fibers were stronger around the PAR4-AP- and pCol-treated titanium surfaces, respectively during the early healing stage. This could have implications for improved mucosal sealing around dental implants, potentially reducing complications such as peri-implantitis.

The Guided Bone Regeneration of a Large, Non-Contained, Perforated Maxillary Anterior Perforation Defect: A Case Report.

The reconstruction of alveolar ridge defects can be challenging, especially when the lesion is large, non-contained, and located in the esthetic region. The present report describes the guided bone regeneration (GBR) procedure and prosthetic rehabilitation of a severe perforation defect in the anterior maxilla. Clinical and radiographic evaluation of the lesion indicated an endodontic-periodontal origin, and biopsy results confirmed the absence of malignancy. GBR was performed with the use of cortical mineralized freeze-dried bone allograft (FDBA) combined with recombinant human platelet derived growth factor BB (rhPDGF-BB) and a resorbable collagen membrane without the use of tenting or fixation screws. At six months post-GBR, cone beam computed tomography (CBCT) revealed adequate bone fill for the placement of 4.1 x 10 mm or 4.1 x 12 mm dental implants. The implant surgery was fully guided with a two-stage approach. After a ten-month of healing phase, the implants were loaded with a screw-retained porcelain bridge. The staged GBR approach using a combination of FDBA, rhPDGF-BB, and a resorbable membrane without the use of tenting or fixation screws resulted in significant bone fill, successful implant placement, and a functional and esthetic implant-supported prosthesis.

Current Implementation of Digital Dentistry for Removable Prosthodontics in US Dental Schools.

Objectives: Although digital technology has been widely integrated into dental education, there is limited literature investigating the extent of the integration of computer-aided design and computer-aided manufacturing (CAD-CAM) for removable systems in the dental curriculum. The purpose of this study was to assess the current implementation of CAD-CAM complete and partial dentures in predoctoral (PP) and advanced graduate prosthodontic (AGP) education in US dental schools. The study also aimed to identify potential barriers to its implementation in the dental curriculum. Methods: An online survey with 15 questions was created using online survey software. The survey was distributed to the directors of predoctoral prosthodontics in 56 schools and advanced graduate programs of prosthodontics in 52 schools listed in the 2018-19 American Dental Education Association (ADEA) Directory. Results: The percentage of programs (PP and AGP) implementing CAD-CAM complete dentures (CAD-CAM CDs) and CAD-CAM removable partial dentures (CAD-CAM RPDs) in their didactic, preclinical, and clinical curricula was recorded. CAD-CAM CDs are taught in didactic courses in 54.2% of PP and 65.2% of AGP. However, CAD-CAM RPDs are only taught in 37.5% of PP and 47.8% of AGP. Programs are largely limited by a lack of funds, resources, time, and faculty members. Conclusion: While digital technologies have indeed become more prevalent in dental education, many institutions face barriers to implementation. More research must be conducted in order to support the continued incorporation of digital technologies into dental education.

Importance of bitewing radiographs for the early detection of interproximal carious lesions and the impact on healthcare expenditure in Japan.

BACKGROUND: Globally, the direct cost of dental caries is approximately $298B yearly, consuming 5-10% of national healthcare budgets. Bitewing radiographs (BWR) are the standard method of diagnosing interproximal dental caries. In Japan, bitewing radiographs are rarely used. This retrospective observational study was conducted to measure the potential economic impact of carious lesions left undiagnosed and untreated due to this omission of bitewing radiographs. METHODS: The total number of existing carious lesions, the number of undiagnosed lesions, and costs of treating these lesions were calculated from the national database of Ministry of Health, Labor and Wellness in Japan between June 2013 and 2017. The number of affected teeth was estimated using prevalence data and undiagnosed lesions were estimated. The expense associated with treating progressed lesions was calculated using the standard Japanese fee structure. BWR trends were assessed, and analyses were performed to understand the differences between states and populations over time. RESULTS: The average number of BWR taken monthly per office was 48.3±1.1 (average ± SD). It was calculated that an average of 6,429,155 lesions went undiagnosed per month, 93.5 teeth per practice, and 1.6 teeth per patient. The cost of treating lesions that went undiagnosed and then progressed into more invasive restorations was estimated to be between $57M-$218M more (difference between NaF varnish and class II restorations), and $150M-$443M more (difference between Class II restoration and crown or crown with RCT). CONCLUSIONS: BWRs are crucial in diagnosing a significant number of carious lesions. There is considerable impact on health and cost to the national health system due to undiagnosed lesions. Practitioners need to be educated on reading and understanding BWR, and policy should be changed to cover BWR.

Accuracy of a Method to Monitor Root Position Using a 3D Digital Crown/Root Model during Orthodontic Treatments.

This study aimed to assess the accuracy of a method of predicting post-movement root position during orthodontic treatment using a 3D digital crown/root model (3DCRM) created with pre-movement records of both cone-beam computed tomography (CBCT) and dental arch digital scans. Pre- and post-movement CBCT scans and dental arch digital scans of five patients who had completed orthodontic treatments were used in this study. The 3DCRM was superimposed onto the post-movement scanned dental arch to identify the post-movement root position (test method). Post-movement CBCT (referenced as the current method) served as the control to identify the actual post-movement root position. 3D-coordinate analysis revealed no significant differences between the test and current methods along the X and Y axes. However, the discrepancy on the Z axis (especially in cases of intrusion) was greater than that in all other directions for all three tooth types examined (p < 0.05). A strong positive correlation between the degree of discrepancy and the distance of tooth movement was observed on the Z axis (r = 0.71). The 3DCRM method showed promising potential to accurately predict root position during orthodontic treatments without the need for a second CBCT. However, root resorption, which affected the Z axis prediction, needs to be closely monitored using periapical radiographs to complement this method.

Comprehensive Assessment of the Universal Healthcare System in Dentistry Japan: A Retrospective Observational Study.

Japan's universal healthcare insurance is facing economic challenges due to the advanced aging society, however, objective data of dental expenditure has never been introduced. This study aimed to identify the associated factors with dental expenditures using government-provided digitized insurance claims data and calculated the spending in the context of dental cost per person (DCPP). Seven associated factors analyzed were age, demographic, geographic, socioeconomic, regional wealth, the impact of the 8020-national campaign implementation (keep 20 teeth at age 80), and the effect of the home-visit dentistry for the elders. The average DCPP was high in older populations (75+) in all prefectures. The prefectures with the highest and lowest DCPP were significant compared to other states and retained their respective places in the cost hierarchy over the four years. The prefectures with more citizens participating in government assistance programs (GAP) had greater DCPPs. Dental costs were significantly related to geographic regions, age, per capita income, government assistance program prevalence, office complete denture frequency, and home visit care per patient. With a growing aging population, dental care costs will continue to increase, burdening its fiscal future. Associated factors identified should be considered to control the contentious increase of healthcare cost.

An In Vivo Spectrophotometric Analysis of Gingival Acrylic Shade Guide.

Selecting shades of acrylic gingival restorative material is challenging. This study examined the shade appropriateness of five acrylic gingival restorative materials. The color was analyzed using an intraoral spectrophotometer (Crystaleye®, Olympus). The gingival color of maxillary incisors for eighty-nine patients was measured. CIELAB color coordinates (L*, a* and b*) were obtained, and the color difference ∆E (Coverage Error: CE) between shade tabs and natural gingival color of patient samples for each shade guide system were compared. Repeated ANOVA and post hoc analyses with Tukey's HSD were performed. There was a significant difference among the mean minimum CEs of the tab sets (p < 0.01). GC Acrylic (CE = 5.89 ∆E ± 2.97) and Lucitone 199® (CE = 6.55 ± 3.33) groups exhibited CEs significantly lower than all other groups (all p < 0.001). The IvoCap® system exhibited the highest CE (10.78 ± 3.80), significantly greater than all other groups (p < 0.001). No significant differences were observed based on sex (p = 0.055) or ethnicity (p = 0.327). The GC Acrylic and Lucitone 199® shade guides showed the lowest CEs. All guides had coverage errors above 5.89 ∆E, which is larger than ∆E thresholds of acceptability. Of the materials evaluated in this study, GC Acrylic and Lucitione 199® are best able to reproduce the clinical appearance of the gingival tissue. Many patients have tissue that cannot be reproduced accurately with currently available materials.

3D digital analysis of tooth movement with magnets and elastics in vitro.

OBJECTIVES: Magnets have many advantages in orthodontics, and our previous studies confirmed their therapeutic potential through 3D-data analysis. The aim of this study was to compare tooth movements, including rotation, obtained via magnetic and elastic forces in crowded cases in vitro. METHODS: Typodont models mimicking a crowded case were prepared. In the magnetic force-driven orthodontics (MG) group, Nd-Fe-B magnets were attached to the labial surfaces from UR4 to UL4 for attracting force, and to UR6 and UL6 for repulsing force. For the elastic force-driven orthodontic (EL) group, brackets were placed on labial surfaces from UR2 to UL2 with power-chain elastics. A NiTi archwire was used in both groups. The models were 3D scanned before and after tooth movement and exported as STL files. The pre- and post-movement STL files were superimposed. The 3D coordinates of the measurement points of the crown and root apex were obtained, and tooth displacement, 3D movements (X, Y, and Z-axis), and rotation (yaw, pitch, and roll) were calculated. Two-tailed Student's t-test was performed for comparison of the results between MG and EL groups (n = 3). RESULTS: Overall, both groups indicated similar movement and rotation to achieve the planned arch form. In the crown movement and rotation, no significant differences were observed between MG and EL groups. However, in the root movement, there was a significant difference between MG and EL groups in X and Z axis for the canines. CONCLUSIONS: Magnetic force-driven orthodontics demonstrated comparable results to elastics with less tipping movement, suggesting a potential future orthodontic modality. CLINICAL SIGNIFICANCE: This in vitro study showed the potential of magnetic force for orthodontic application. The magnetic force-driven orthodontics might provide less tipping tooth movement compared to conventional methods, such as power chains, and could be a future technique for comprehensive orthodontic treatment.

Association between cognitive health and masticatory conditions: a descriptive study of the national database of the universal healthcare system in Japan.

Cognitive health is subject to decline with increasing numbers of lost teeth which impacts mastication. This study is a descriptive data analysis of the association between masticatory and cognitive conditions using a large database. We obtained the dental and medical records from Japan's universal healthcare system (UHCS) from the national database in 2017. The data from 94% of the Japanese population aged 65 and over is included. It is inclusive of diagnostic codes for various types of cognitive impairment, as well as dental treatment records from 2012 to 2017. The cognitive impairment group was compared to those without a diagnosis of cognitive impairment. Crude odds ratio between loss of mastication with natural teeth (exposure) and cognitive impairments (outcome) were compared. Patients who have lost masticatory function are likely to have cognitive impairment with an odds ratio of 1.89 (p<0.0001) for early elderly (aged 65-75) and 1.33 (p<0.0001) for advanced elderly (over 75). Patients who are edentulous and function with complete dentures are likely to have cognitive impairment with an odds ratio of 2.38 (p<0.0001) and 1.38 (p<0.0001), respectively. The data shows a convincing and significant result of an association between cognitive health and oral health, related to masticatory conditions.

Spectrophotometric analysis of tooth color reproduction on anterior all-ceramic crowns: Part 1: analysis and interpretation of tooth color.

UNLABELLED: Color matching of a natural maxillary central incisor is one of the most difficult challenges in clinical dentistry. Accurate color determination and interpretation of tooth color information in ceramic work is an important step in achieving success in ideal color reproduction. In this case study, factors that influence tooth color determination were analyzed, and the process of interpretation of tooth color information was assessed based on scientific color data using a novel dental spectrophotometer system. An all-ceramic crown for a maxillary right central incisor was the subject of this color assessment. The contralateral incisor was an intact natural tooth that was bleached and then used as the target shade for an all-ceramic crown. The dental spectrophotometer (Crystaleye, Olympus, Tokyo, Japan) was used for tooth color measurement and analysis. The target tooth, prepared tooth, maxillary arch, and face images were captured for color information. Tooth color stabilization related to tooth bleaching and tooth dehydration was assessed. Based on tooth color data obtained by the dental spectrophotometer, color was analyzed in several different areas of a tooth using CIELAB (Commission Internationale de l'Eclarirage) color coordinates L*, a*, b*, and color difference Delta E. Interpretation of the tooth color information was made in each of porcelain layers on a blue map, and its intensions for color reproduction were described. Throughout this spectrophotometric assessment, the process of stabilized tooth color determination, tooth color analysis, interpretations, and fabrication of a blue map for porcelain work was clarified with color data as scientific evidence. CLINICAL SIGNIFICANCE: The use of a dedicated dental spectrophotometer allows the evaluation and measurement of the color of a bleached tooth. This allows the laboratory technician to more precisely understand the bleached tooth shade as well as when the bleached tooth color has become stable enough to match to a contralateral all-ceramic crown restoration.

Spectrophotometric analysis of tooth color reproduction on anterior all-ceramic crowns: Part 2: color reproduction and its transfer from in vitro to in vivo.

Color reproduction of an anterior tooth requires advanced laboratory techniques, talent, and artistic skills. Color matching in a laboratory requires the successful transfer from in vivo with careful considerations. The purpose of this study was to monitor and verify the color reproduction process for an anterior all-ceramic crown in a laboratory through spectrophotometric measurements. Furthermore, a crown insertion process using composite luting cements was assessed, and the final color match was measured and confirmed. An all-ceramic crown with a zirconia ceramic coping for the maxillary right central incisor was fabricated. There was a significant color difference between the prepared tooth and the die material. The die material selected was the closest match available. The ceramic coping filled with die material indicated a large color difference from the target tooth in both lightness and chromaticity. During the first bake, three different approaches were intentionally used corresponding with three different tooth regions (cervical, body, and incisal). The first bake created the fundamental color of the crown that allowed some color shifts in the enamel layer, which was added later. The color of the completed crown demonstrated an excellent color match, with Delta E 1.27 in the incisal and 1.71 in the body. In the cervical area, color match with Delta E 2.37 was fabricated with the expectation of a color effect from the underlying prepared tooth. The optimal use of composite luting cement adjusted the effect from the underlying prepared tooth color, and the color match fabricated at a laboratory was successfully transferred to the clinical setting. The precise color measurement system leads to an accurate verification of color reproduction and its transfer. CLINICAL SIGNIFICANCE The use of a dedicated dental spectrophotometer during the fabrication of an all-ceramic crown allows the dentist and the laboratory technician to accurately communicate important information to one another about the shade of the tooth preparation, the shade of the contralateral target tooth, and the influence of luting cement on the final restoration, thereby allowing the technician better control over the outcome of their tooth color matching efforts and the final color match of an all-ceramic restoration.

Effect of Magnet Position on Tipping and Bodily Tooth Movement in Magnetic Force-Driven Orthodontics.

The goal of our study is to launch magnetic force-driven orthodontics. This continuous study investigated the influence of magnet position on tipping and bodily tooth movement, using 3D printing technology and digital analysis. Orthodontic typodont models (TMs) for space-closure were 3D printed to mimic maxillary central incisors. Nd-Fe-B magnets were placed in the middle third (Model-M), and the cervical third (Model-C), of the tooth. TMs, before and after movement, were digitally scanned and superimposed. The 3D digital coordinates (X, Y, and Z axes), and rotations (yaw, pitch, and roll) of the tooth crown and root, were calculated and compared between the two magnet position settings. Model-M showed higher rates of movement, but more rotation than Model-C (p < 0.01). The root apex of Model-M moved in the opposite direction of the crown (R = -0.29), indicating tipping movement. In contrast, the crown and root apex moved in the same direction (R = 0.56) in Model-C, indicating bodily movement. These patterns were confirmed in a typodont model of a moderate crowding case. The results validated that modifying the magnet position increased the amount of bodily tooth movement, and decreased rotation/tipping in an ex vivo setting.