RESUMEN
OBJECTIVE: The aim of the present study was to develop and optimize a wound dressing film loaded with chloramphenicol (CAM) and ibuprofen (IBU) using a Quality by Design (QbD) approach. SIGNIFICANCE: The two drugs have been combined in the same dressing as they address two critical aspects of the wound healing process, namely prevention of bacterial infection and reduction of inflammation and pain related to injury. METHODS: Three critical formulation variables were identified, namely the ratios of Kollicoat SR 30D, polyethylene glycol 400 and polyvinyl alcohol. These variables were further considered as factors of an experimental design, and 17 formulations loaded with CAM and IBU were prepared via solvent casting. The films were characterized in terms of dimensions, mechanical properties and bioadhesion. Additionally, the optimal formulation was characterized regarding tensile properties, swelling behavior, water vapor transmission rate, surface morphology, thermal behavior, goniometry, in vitro drug release, cell viability, and antibacterial activity. RESULTS: The film was optimized by setting minimal values for the folding endurance, adhesive force and hardness. The optimally formulated film showed good fluid handling properties in terms of swelling behavior and water vapor transmission rate. IBU and CAM were released from the film up to 80.9% and 82.5% for 8 h. The film was nontoxic, and the antibacterial activity was prominent against Micrococcus spp. and Streptococcus pyogenes. CONCLUSIONS: The QbD approach was successfully implemented to develop and optimize a novel film dressing promising for the treatment of low-exuding acute wounds prone to infection and inflammation.
Asunto(s)
Antibacterianos , Vendajes , Cloranfenicol , Ibuprofeno , Cicatrización de Heridas , Ibuprofeno/administración & dosificación , Ibuprofeno/química , Ibuprofeno/farmacología , Cicatrización de Heridas/efectos de los fármacos , Cloranfenicol/administración & dosificación , Cloranfenicol/farmacología , Cloranfenicol/química , Antibacterianos/administración & dosificación , Antibacterianos/farmacología , Antibacterianos/química , Liberación de Fármacos , Humanos , Alcohol Polivinílico/química , Polietilenglicoles/química , Animales , Supervivencia Celular/efectos de los fármacos , Química Farmacéutica/métodosRESUMEN
Improved global access to novel age-appropriate formulations for paediatric subsets, either of new chemical entities or existing drugs, is a priority to ensure that medicines meet the needs of these patients. However, despite regulatory incentives, the introduction to the market of paediatric formulations still lags behind adult products. This is mainly caused by additional complexities associated with the development of acceptable age-appropriate paediatric medicines. This position paper recommends the use of a paediatric Quality Target Product Profile as an efficient tool to facilitate early planning and decision making across all teams involved in paediatric formulation development during the children-centric formulation design for new chemical entities, or to repurpose/reformulate off-patent drugs. Essential key attributes of a paediatric formulation are suggested and described. Moreover, greater collaboration between formulation experts and clinical colleagues, including healthcare professionals, is advocated to lead to safe and effective, age-appropriate medicinal products. Acceptability testing should be a secondary endpoint in paediatric clinical trials to ensure postmarketing adherence is not compromised by a lack of acceptability. Not knowing the indications and the related age groups and potential dosing regimens early enough is still a major hurdle for efficient paediatric formulation development; however, the proposed paediatric Quality Target Product Profile could be a valuable collaborative tool for planning and decision making to expedite paediatric product development, particularly for those with limited experience in developing a paediatric product.
Asunto(s)
Medicamentos sin Prescripción , Médicos , Humanos , Niño , AdultoRESUMEN
(1) Background: Portable NIR spectrometers gain more and more ground in the field of Process Analytical Technology due to the easy on-site flexibility and interfacing versatility. These advantages that originate from the instrument miniaturization, also come with a downside with respect to performance compared to benchtop devices. The objective of this work was to evaluate the performance of MicroNIR in a pharmaceutical powder blend application, having three active ingredients and 5 excipients. (2) Methods: Spectral data was recorded in reflectance mode using static and dynamic acquisition, on calibration set samples developed using an experimental design. (3) Results: The developed method accurately predicted the content uniformity of these complex mixtures, moreover it was validated in the entire calibration range using ±10% acceptance limits. With respect to at-line prediction, the method presented lower performance compared to a previously studied benchtop spectrometer. Regarding the in-line monitoring of the blending process, it was shown that the spectral variability-induced by dynamic acquisition could be efficiently managed using spectral pre-processing. (4) Conclusions: The in-line process monitoring resulted in accurate concentration profiles, highlighting differences in the mixing behaviour of the investigated ingredients. For the low dose component homogeneity was not reached due to an inefficient dispersive mixing.
Asunto(s)
Química Farmacéutica , Composición de Medicamentos , Tecnología Farmacéutica , Calibración , Polvos , Espectroscopía Infrarroja CortaRESUMEN
PURPOSE: To evaluate the corneal anesthetic effect following topical application of tramadol alone and in combination with dexmedetomidine, and compare it to proparacaine, in clinically healthy rats. METHODS: A randomized, crossover study was performed. Twenty Wistar albino rats (n = 40 eyes) were used. Corneal touch threshold (CTT) measurements (in mm) were obtained using a Cochet-Bonnet aesthesiometer. CTT measurements were obtained at baseline, 1-min following application of the topical anesthetic agent, and repeated at 5-min intervals up to 75 min. The topical protocol involved 3 treatment conditions, separated by a 2-week washout period: proparacaine, tramadol alone, and tramadol in combination with dexmedetomidine. RESULTS: CTT values were significantly decreased compared to baseline at each timepoint until completion of the 75-min evaluation in all treated eyes, regardless of the assigned treatment (p < 0.0083). With tramadol, complete corneal anesthesia (CTT = 0) was achieved within 1-5 min in 18 eyes and ranged from 5 to 25 min. Co-administration of dexmedetomidine to tramadol resulted in significantly increased CTT values from 5 to 20 min following topical application, compared to tramadol alone (p < 0.0083), and complete corneal anesthesia was achieved in only 14 out of 20 treated eyes. CONCLUSION: Tramadol might be a useful alternative to topical anesthetic agents, providing a dose-related corneal anesthetic effect. Co-administration of dexmedetomidine does not potentiate its anesthetic effect. The underlying mechanism(s) of drug antagonism between tramadol and dexmedetomidine remains to be determined.
Asunto(s)
Dexmedetomidina , Tramadol , Animales , Ratas , Anestésicos Locales , Córnea , Estudios Cruzados , Soluciones Oftálmicas , Propoxicaína , Ratas WistarRESUMEN
OBJECTIVE: This study proposed the development of oral lyophilisates with respect to pediatric medicine development guidelines, by applying risk management strategies and DoE as an integrated QbD approach. METHODS: Product critical quality attributes were overviewed by generating Ishikawa diagrams for risk assessment purposes, considering process, formulation and methodology related parameters. Failure Mode Effect Analysis was applied to highlight critical formulation and process parameters with an increased probability of occurrence and with a high impact on the product performance. To investigate the effect of qualitative and quantitative formulation variables D-optimal designs were used for screening and optimization purposes. RESULTS: Process parameters related to suspension preparation and lyophilization were classified as significant factors, and were controlled by implementing risk mitigation strategies. Both quantitative and qualitative formulation variables introduced in the experimental design influenced the product's disintegration time, mechanical resistance and dissolution properties selected as CQAs. The optimum formulation selected through Design Space presented ultra-fast disintegration time (5 seconds), a good dissolution rate (above 90%) combined with a high mechanical resistance (above 600 g load). CONCLUSIONS: Combining FMEA and DoE allowed the science based development of a product with respect to the defined quality target profile by providing better insights on the relevant parameters throughout development process. The utility of risk management tools in pharmaceutical development was demonstrated.
Asunto(s)
Química Farmacéutica/métodos , Liofilización/métodos , Gestión de Riesgos/métodos , Suspensiones/administración & dosificación , Composición de Medicamentos , Medición de Riesgo , Suspensiones/químicaRESUMEN
The aim of the present study was to evaluate the funtion of fenugreek seed mucilage (FSM) as potential matrix forming agent for orodispersible pharmaceutical lyophilisates. The FSM was isolated and characterized. FSM colloidal dispersions were prepared and the rheological evaluation was performed. Oral lyophilisates (OLs) with different FSM concentrations, containing meloxicam as model drug were prepared by freeze drying method. The OLs were characterized and compared to gelatin containing tablets, prepared under the same conditions. The FSM dispersions revealed shear thinning flow type. Based on colloidal dispersions' rheological properties, five FSM concentrations were taken forward to the lyophilization step. Completely dry and elegant tablets were obtained. Texture analysis indicated highly porous structures, confirmed by SEM analysis, which explain the fast disintegration properties. All the prepared tablets disintegrated in less than 47 s. The disintegration process was prolonged by the increase in FSM content, due to the high viscosity the polymer creates in aqueous media. FSM tablets presented longer disintegration times, as compared to gelatin tablets, but also higher crushing strength. Considering the fast disintegration and the high crushing strength, FSM is a good candidate as matrix forming agent for fast disintegrating dosage forms or other freeze-dried preparations.
RESUMEN
OBJECTIVE: This work focused on simultaneously investigating formulation variables and freeze-drying parameters when preparing orodispersible tablets with meloxicam (Mel), by a Quality by Design (QbD) approach. MATERIALS AND METHODS: Methylcellulose (MC) was selected as a matrix forming agent and mannitol (Man) as cryoprotectant, both at two concentration levels. The freezing regime was also varied between fast and shelf-ramped, to find out how it affects the final products. The tablet formulations were characterized for their disintegration time, wetting properties, mechanical properties, morphology and in vitro dissolution. Response Surface Modeling completed the statistical analysis that assessed the effects of independent variables on the responses. RESULTS: All the responses showed good fitting to the chosen model. The increase in MC content determined a positive effect on disintegration time, wetting time, mechanical strength and a negative effect on Mel dissolution. High levels of Man-determined brittle products with low-absorption capacity and fast Mel dissolution. The freezing rate had an important effect on the structure of tablets: fast freezing determined slightly thicker pore walls with smooth surfaces, while shelf-ramped freezing led to a multiple-layer structure with increased hardness. Still, shelf-ramped freezing yielded higher Mel release, due to physical changes of the active substance during the freeze-drying process. CONCLUSION: From the generated design space, an optimal formulation was obtained and the results validated the experimental design. The QbD approach was an efficient manner of understanding formulation and process parameters at the freeze-dried orodispersible tablets preparation.
RESUMEN
Cleansing products, particularly innovative cosmetic foams, must efficiently remove impurities with minimal impact on the skin barrier and have a favorable sensory profile. The choice of product ingredients is crucial to ensure the optimal characteristics. The current study aims to provide a comprehensive framework for understanding the variability in the characteristics of a cleansing foam to achieve desired properties. The novelty of this study lies in the combination of ingredients for their potential synergistic and complementary effects in cleansing dry skin, as well as the application of Quality by Design (QbD) elements to develop and optimize the formulation of cleansing foam. The effects of varying the concentration of mild surfactants, polyols, and gel-forming agents on the properties of the gels and of the generated foams were studied. Significant influences of the formulation factors were observed: an increased ratio of xanthan gum positively impacted the texture properties of the gel, whereas higher concentrations of surfactants had a negative impact on these parameters. Additionally, increasing the polyols ratio was found to negatively influence the foaming property and stability of the foam. The study established an optimal formulation of a cleansing foam with a ratio of 0.45% xanthan gum, 26.19% surfactants and 2.16% polyols to be used for dry skin hygiene.
RESUMEN
In recent years, solid dosage forms have gained interest in pediatric therapy because they can provide valuable benefits in terms of dose accuracy and stability. Particularly for orodispersible films (ODFs), the literature evidences increased acceptability and dose flexibility. Among the various available technologies for obtaining ODFs, such as solvent casting, hot-melt extrusion, and ink printing technologies, the solvent-free preparation methods exhibit significant advantages. This study investigated Vacuum Compression Molding (VCM) as a solvent-free manufacturing method for the preparation of flexible-dose pediatric orodispersible films. The experimental approach focused on selecting the appropriate plasticizer and ratios of the active pharmaceutical ingredient, diclofenac sodium, followed by the study of their impacts on the mechanical properties, disintegration time, and drug release profile of the ODFs. Additional investigations were performed to obtain insights regarding the solid-state properties. The ODFs obtained by VCM displayed adequate quality in terms of their critical characteristics. Therefore, this proof-of-concept study shows how VCM could be utilized as a standalone method for the production of small-scale ODFs, enabling the customization of doses to meet the individual needs of pediatric patients.
RESUMEN
Gastroretentive drug delivery systems (GRDDSs) have gained substantial attention in the last 20 years due to their ability to retain the drug in the stomach for an extended time, thus promoting an extended release and high bioavailability for a broad range of active pharmaceutical ingredients (APIs) that are pH-sensitive and/or have a narrow absorption window. The currently existing GRDDSs include floating, expanding, mucoadhesive, magnetic, raft-forming, ion-exchanging, and high-density systems. Although there are seven types of systems, the main focus is on floating, expanding, and mucoadhesive systems produced by various techniques, 3D printing being one of the most revolutionary and currently studied ones. This review assesses the newest production technologies and briefly describes the in vitro and in vivo evaluation methods, with the aim of providing a better overall understanding of GRDDSs as a novel emerging strategy for targeted drug delivery.
RESUMEN
Compounded medicines are widely used, especially for pediatric patients. The aim of this study was to evaluate children's acceptability of compounded preparations and to provide information regarding compounding practices' characteristics in a Romanian hospital setting. An observational, cross-sectional, and retrospective study was conducted in three Clinical Pediatric Departments (Emergency Clinical Hospital for Children, Cluj-Napoca). The study population comprised patients under 18 years old taking at least one compounded medication. Study data was collected mainly through an interviewer-administered questionnaire and medicine acceptability was assessed based on the children's first reaction to the preparations using a 3-point facial hedonic scale. A total of 162 compounded medications were evaluated. A positive/negative reaction was reported for 20.83%/58.33%, 20.63%/49.21%, and 66.67%/7.41% of oral, oromucosal and cutaneous dosage forms. Although patient disapproval was recorded for various reasons, medication administration was successful in over 75% of cases. Factors such as fewer steps required for intake of a dose, capsule dosage form, no additional food/drink immediately after drug intake, medication perceived as "easy/very easy" to swallow, were correlated with a better acceptability of oral preparations. This study highlights the importance of identifying factors that can improve the acceptability of compounded preparations and, subsequently, treatment outcomes in pediatric patients.
Asunto(s)
Composición de Medicamentos , Hospitales Pediátricos , Humanos , Rumanía , Niño , Estudios Transversales , Composición de Medicamentos/métodos , Estudios Retrospectivos , Femenino , Masculino , Preescolar , Adolescente , Encuestas y Cuestionarios , Lactante , Administración Oral , Preparaciones Farmacéuticas/administración & dosificación , Preparaciones Farmacéuticas/químicaRESUMEN
Orodispersible tablets (ODTs) represent a growing category of dosage forms intended to increase the treatment acceptability for special groups of patients. ODTs are designed to rapidly disintegrate in the oral cavity and to be administered without water. In addition, ODTs are easy to manufacture using standard excipients and pharmaceutical equipment. This study adds to previously published research that developed an instrumental tool to predict oral disintegration and texture-related palatability of ODTs with different formulations. The current study aimed to challenge the predictive capacity of the models under variable process conditions. The studied process parameters with potential impact on the pharmaceutical properties, texture profiles, and palatability were the compression pressure, punch shape and diameter. Subsequently, for all the placebo and drug-loaded ODTs, the in vivo disintegration time and texture-related palatability were determined with healthy volunteers. Previously developed regression models were applied to predict the formulation's disintegration time and texture-related palatability characteristics of ODTs obtained under different experimental conditions. The influence of process variables on the predictive performance of the models was estimated by calculating the residuals as the difference between the predicted and observed values for the investigated response. Increasing the speed of the analyser`s probe from 0.01 mm/s to 0.02 mm/s led to an improved differentiation of the texture profiles. The in vivo disintegration time and texture-related palatability scores were only influenced by the mechanical resistance and the tablet shape. Lower score was observed for the larger diameter tablets (10 mm). Overall, the prediction of the disintegration time at 0.02 mm/s was more accurate, except for stronger tablets. The best prediction of texture-related palatability was achieved for the 10 mm tablets, tested at 0.01 mm/s speed. The same model achieved good predictions of the oral disintegration time for all API-loaded formulations, which confirmed the ability of the texture analysis to capture process-related variability. Drug loading decreased the predictive capacity of the texture-related palatability because of the taste effect.
Asunto(s)
Solubilidad , Comprimidos , Gusto , Comprimidos/química , Humanos , Administración Oral , Análisis Multivariante , Masculino , Adulto , Femenino , Excipientes/química , Química Farmacéutica/métodos , Adulto Joven , Composición de Medicamentos/métodosRESUMEN
Three-dimensional (3D) printing in the pharmaceutical field allows rapid manufacturing of a diverse range of pharmaceutical dosage forms, including personalized items. The application of this technology in dosage form manufacturing requires the judicious selection of excipients because the selected materials must be appropriate to the working principle of each technique. Most techniques rely on the use of polymers as the main material. Among the pharmaceutically approved polymers, polyvinyl alcohol (PVA) is one of the most used, especially for fused deposition modeling (FDM) technology. This review summarizes the physical and chemical properties of pharmaceutical-grade PVA and its applications in the manufacturing of dosage forms, with a particular focus on those fabricated through FDM. The work provides evidence on the diversity of dosage forms created using this polymer, highlighting how formulation and processing difficulties may be overcome to get the dosage forms with a suitable design and release profile.
RESUMEN
In the past few decades, texture analysis (TA) has gained importance as a valuable method for the characterization of solid oral dosage forms. As a result, an increasing number of scientific publications describe the textural methods that evaluate the extremely diverse category of solid pharmaceutical products. Within the current work, the use of texture analysis in the characterization of solid oral dosage forms is summarised with a focus on the evaluation of intermediate and finished oral pharmaceutical products. Several texture methods are reviewed regarding the applications in mechanical characterization, and mucoadhesion testing, but also in estimating the disintegration time and in vivo specific features of oral dosage forms. As there are no pharmacopoeial standards for pharmaceutical products tested through texture analysis, and there are important differences between reported results due to different experimental conditions, the choice of testing protocol and parameters is challenging. Thereby, this work aims to guide the research scientists and quality assurance professionals involved in different stages of drug development into the selection of optimal texture methodologies depending on the product characteristics and quality control needs.
Asunto(s)
Administración Oral , Control de Calidad , Preparaciones Farmacéuticas , Formas de DosificaciónRESUMEN
Three-dimensional printing by fused deposition modeling (FDM) coupled with hot-melt extrusion (HME) is a point of convergence of research efforts directed toward the development of personalized dosage forms. In addition to the customization in terms of shapes, sizes, or delivered drug doses, the modulation of drug release profiles is crucial to ensure the superior efficacy and safety of modern 3D-printed medications compared to those of conventional ones. Our work aims to solidify the groundwork for the preparation of 3D-printed tablets that ensure the sustained release of diclofenac sodium. Specifically, we achieved the fast release of a diclofenac sodium dose to allow for the prompt onset of its pharmacological effect, further sustaining by the slow release of another dose to maintain the effect over a prolonged timeframe. In this regard, proper formulation and design strategies (a honeycomb structure for the immediate-release layer and a completely filled structure for the sustained-release layer) were applied. Secondarily, the potential of polyvinyl alcohol to function as a multifaceted polymeric matrix for both the immediate and slow-release layers was explored, with the objective of promoting the real-life applicability of the technique by downsizing the number of materials required to obtain versatile pharmaceutical products. The present study is a step forward in the translation of HME-FDM-3DP into a pharmaceutical manufacturing methodology.
RESUMEN
The present study aimed to develop 3D printed dosage forms, using custom-made filaments loaded with diclofenac sodium (DS). The printed tablets were developed by implementing a quality by design (QbD) approach. Filaments with adequate FDM 3D printing characteristics were produced via hot melt extrusion (HME). Their formulation included DS as active substance, polyvinyl alcohol (PVA) as a polymer, different types of plasticisers (mannitol, erythritol, isomalt, maltodextrin and PEG) and superdisintegrants (crospovidone and croscarmellose sodium). The physicochemical and mechanical properties of the extruded filaments were investigated through differential scanning calorimetry (DSC), X-ray diffraction (XRD) and tensile measurements. In addition, cylindrical-shaped and tubular-shaped 3D dosage forms were printed, and their dissolution behaviour was assessed via various drug release kinetic models. DSC and XRD results demonstrated the amorphous dispersion of DS into the polymeric filaments. Moreover, the 3D printed tablets, regardless of their composition, exhibited a DS release of nearly 90% after 45 min at pH 6.8, while their release behaviour was effectively described by the Korsmeyer-Peppas model. Notably, the novel tube design, which was anticipated to increase the drug release rate, proved the opposite based on the in vitro dissolution study results. Additionally, the use of crospovidone increased DS release rate, whereas croscarmellose sodium decreased it.
RESUMEN
The colour of a product plays an important role in consumer experiences, and in the context of pharmaceutical products, this could potentially affect a patient's expectations, behaviours, and adherence. Several studies have been conducted on adults, but little is known about children's opinions on colours of medicines and to what extent medicines' colour affects their acceptability. To address this gap, a systematic search in PubMed, Scopus, MEDLINE, and Web of Science was conducted. Two authors independently screened the titles, abstracts, and references of all articles and selected studies conducted on children (0-18 years old), assessing children's preferences or opinions about colour of oral dosage forms as either a primary or secondary objective or as an anecdotal record. A total of 989 publications were identified and, after screening, 18 publications were included in the review. Red and pink were the most liked colours and there appeared to be a relationship between the colour of a medicine and expected taste/flavour. The review also highlighted a scarcity of information, usually collected as an anecdotal record. Several gaps in the current knowledge were underlined, emphasizing the need of patient-centred studies to understand if the use of certain colours can improve or worsen the acceptability of a paediatric medicine. This will help inform pharmaceutical manufacturers and regulators on the role and need of colours in children's medicines beyond quality purposes.
RESUMEN
The paediatric population has always suffered from a lack of medicines tailored to their needs, especially in terms of accurate dosage, stability and acceptability. Orodispersible dosage forms have gone through a resurrection as an alternative to liquid formulations or fractioned solid formulations, although they are still subject to several inconveniences, among which the unpleasant taste and the low oral bioavailability of the API are the most significant hurdles in the way of achieving an optimal drug product. Nanostructures can address these inconveniences through their size and variety, owing to the plethora of materials that can be used in their manufacturing. Through the formation and functionalisation of nanostructures, followed by their inclusion in orodispersible dosage forms, safe, stable and acceptable medicines intended for paediatric use can be developed.
RESUMEN
Tablet manufacturing involves the processing of raw materials through several unit operations. Thus, the mitigation of input-induced variability should also consider the downstream processability of intermediary products. The objective of the present work was to study the effect of variable raw materials and processing conditions on the compression properties of granules containing two active pharmaceutical ingredients (APIs) and microcrystalline cellulose. Differences in compressibility and tabletability of granules were highlighted in function of the initial particle size of the first API, granule polydispersity and fragmentation. Moreover, interactions were underlined with the atomizing pressure. Changing the supplier of the second API was efficiently controlled by adapting the binder addition rate and atomizing pressure during granulation, considering the starting crystal size. By fitting mathematical models on the available compression data, the influence of diluent source on granule compactibility and tabletability was identified. These differences resumed to the ease of compaction, tableting capacity and pressure sensitivity index due to variable water binding capacity of microcrystalline cellulose. Building the design space enabled the identification of suitable API types and the appropriate processing conditions (spray rate, atomizing pressure, compression force) required to ensure the desired tableting performance.
RESUMEN
In this study, the biological activities of four extracts from Vitis vinifera by-products: two pomace extracts, white (WPE) and red (RPE), a canes extract (CE), and their combination (CoE), were evaluated, to be included in freeze-drying mouthwashes formulations. The cytocompatibility and anticancerous potential of the four extracts were tested on three cancerous cell lines, as well as the cytoprotective activity against nicotine-induced cytotoxicity and the antioxidant potential determined on a human gingival fibroblasts (HGF) cell line. Additionally, the anti-inflammatory activity and the antimicrobial activity against several microorganisms from the oral microbiome were tested. Freeze-dried mouthwashes with CoE were prepared and characterized, both as lyophilizates and after reconstitution. The four tested extracts showed the highest cytotoxicity on MDA-kb2 cell line. The antioxidant potential was demonstrated for WPE, RPE, CE, and CoE, both in non-stimulated and H2O2 stimulated conditions. The four extracts reduced the levels of proinflammatory cytokines (IL-6, IL-8, and IL-1ß) in a dose-dependent manner, confirming their anti-inflammatory activity. The antimicrobial activity of tested extracts was shown against pathogenic bacteria from the oral microbiome. Mouthwashes of CoE with poloxamer-407, xylitol, and different ratios of mannitol were prepared by freeze-drying leading to porous formulations with interesting mechanical properties and reconstitution times.