RESUMEN
Per- and polyfluoroalkyl substances are an emerging class of contaminants that are environmentally persistent, bioaccumulative, and noxious to human health. Among these, perfluorooctanoic acid (PFOA) molecules are widely found in ground and surface water sources. A novel high surface area, meso- and macroporous syndiotactic polystyrene (sPS) wet gel is used in this work as the adsorbent of PFOA molecules from water at environmentally relevant PFOA concentrations (≤1 µg/L) and cleanse water to below the U.S. EPA's 2023 health advisory limit of 4 parts per trillion (ppt). The sigmoidal shape of the PFOA adsorption isotherm indicates a two-step adsorption mechanism attributed to the strong affinity of PFOA molecules for the sPS surface and molecular aggregation at solid-liquid interfaces or within the pores of the sPS wet gel. The adsorption kinetics and the effects of sPS wet gel porosity, pore size, and pore volume on the removal efficiency are reported. The adsorption kinetics is seen to be strongly dependent on pore size and pore volume.
RESUMEN
Outcomes for patients with acute myeloid leukemia (AML) remain poor due to the inability of current therapeutic regimens to fully eradicate disease-initiating leukemia stem cells (LSC). Previous studies have demonstrated that oxidative phosphorylation (OXPHOS) is an essential process that is targetable in LSC. Sirtuin 3 (SIRT3), a mitochondrial deacetylase with a multi-faceted role in metabolic regulation, has been shown to regulate OXPHOS in cancer models; however, it has not yet been studied in the context of LSC. Thus, we sought to identify if SIRT3 is important for LSC function. Using RNAi and a SIRT3 inhibitor (YC8-02), we demonstrate that SIRT3 is a critical target for the survival of primary human LSC but is not essential for normal human hematopoietic stem and progenitor cell function. In order to elucidate the molecular mechanisms by which SIRT3 is essential in LSC we combined transcriptomic, proteomic, and lipidomic approaches, showing that SIRT3 is important for LSC function through the regulation of fatty acid oxidation (FAO) which is required to support OXPHOS and ATP production in human LSC. Further, we discovered two approaches to further sensitize LSC to SIRT3 inhibition. First, we found that LSC tolerate the toxic effects of fatty acid accumulation induced by SIRT3 inhibition by upregulating cholesterol esterification. Disruption of cholesterol homeostasis sensitizes LSC to YC8-02 and potentiates LSC death. Second, SIRT3 inhibition sensitizes LSC to the BCL-2 inhibitor venetoclax. Together, these findings establish SIRT3 as a regulator of lipid metabolism and potential therapeutic target in primitive AML cells.
Asunto(s)
Leucemia Mieloide Aguda , Sirtuina 3 , Humanos , Sirtuina 3/genética , Sirtuina 3/metabolismo , Sirtuina 3/farmacología , Proteómica , Células Madre Neoplásicas/metabolismo , Metabolismo de los Lípidos , Homeostasis , Leucemia Mieloide Aguda/tratamiento farmacológico , Leucemia Mieloide Aguda/genética , Leucemia Mieloide Aguda/metabolismo , Ácidos Grasos/metabolismo , Ácidos Grasos/farmacología , Ácidos Grasos/uso terapéutico , ColesterolRESUMEN
An understanding of surfactant adsorption at solid-liquid interfaces is important for solving many technological problems. This work evaluates surfactant adsorption abilities of high surface area (200-600 m2/g), high porosity (>90%), hierarchically structured open pore polymer gels. Specifically, the interactions of a nonionic block copolymer surfactant, poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO), with three polymer gels, namely, syndiotactic polystyrene (sPS), polyimide (PI), and polyurea (PUA) offering different surface energy values, are evaluated at surfactant concentrations below and well above the critical micelle concentration (CMC). Two distinct surfactant adsorption behaviors are identified from the surface tension and nuclear magnetic resonance data. At concentrations below CMC, the surfactant molecules adsorb as a monolayer on polymer strands, inferred from the Langmuir-type adsorption isotherm, with the adsorbed amount increasing with the specific surface area of the polymer gel. The study reports for the first time that the gels show a strong surfactant adsorption above CMC, with the effective surfactant concentration in the gel reaching several folds of the CMC values. The effective surfactant concentration in the gel is analyzed using surfactant micelle size, polymer surface energy, and pore size of the gel. The findings of this study may have strong implications in liquid-liquid separation problems and in the removal of small dye molecules, heavy metal ions, and living organisms from aqueous streams.
RESUMEN
The development of efficient and mild methods for the synthesis of organofluorine compounds is of foremost interest in various fields of chemistry. A direct pyrimidine-based selective meta-C-H perfluoroalkenylation of arenes involving several commercially available perfluoroolefins is described. The synthetic versatility of the protocol is demonstrated by an extensive substrate scope including different benzylsulfonyl, alkylarene and phenylacetic acid scaffolds. The generality of this methodology including the meta-C-H perfluoroalkenylation of Ibuprofen, the facile cleavage of the directing group and gram-scale reactions are presented.
RESUMEN
This work focuses on the fabrication of polyimide aerogel microparticles of diameter 200-1000 µm from a surfactant-free, two-phase, silicone oil/dimethylformamide (DMF) oil-in-oil (O/O) system using a simple microfluidic device. The polyimide sol prepared in DMF is turned into droplets suspended in silicone oil in the microfluidic device. The droplets are guided to a heated silicone oil bath to accelerate sol-gel transition and imidization reactions, thereby yielding spherical, discrete gel microparticles that do not undergo coalescence. The discrete gel microparticles are isolated and supercritically dried to obtain aerogel microparticles. The microparticle size distribution shows dependence on dispersed and continuous phase flowrates in the microfluidic channels. The microparticle surface morphology shows dependence on the silicone oil bath temperature.
RESUMEN
A single sheet of nickel-titanium (NiTi) shape memory alloy (SMA) was introduced within an IM7/8552 polymer matrix composite (PMC) panel in conjunction with multiple thin film adhesives to promote the interfacial bond strength between the SMA and PMC. End notched flexure (ENF) testing was performed in accordance to ASTM D7905 method for evaluation of mode II interlaminar fracture toughness (GIIC) of unidirectional fiber-reinforced polymer matrix composites. Acoustic emissions (AE) were monitored during testing with two acoustic sensors attached to the specimens. The composite panels examined using scanning electron microscopy techniques after part failure. GIIC values for the control composite samples were found to be higher than those of samples with embedded SMA sheets. The presence of adhesives bonded to SMA sheets further diminished the GIIC values. AE values revealed poor bonding of the panels, with little to no signals during testing.
RESUMEN
Shape Memory Alloy (SMA) was placed within Polymer Matrix Composite (PMC) panels alongside film adhesives to examine bonding. Double cantilever beam (DCB) testing was performed using ASTM D5528. C-scanning was performed before testing, modal acoustic emissions (MAE) were monitored during testing, and microscopy performed post-test. Data was analyzed using modified beam theory (MBT), compliance calibration (CC) and modified compliance calibration (MCC) methods. Fracture toughness for control specimens was higher than previously reported due to fiber-bridging. Specimens with SMAs and adhesives stabilized crack propagation. Results revealed SMA-bridging; a phenomenon mimicking fiber-bridging which increased the load and fracture toughness of SMA specimens.
RESUMEN
Distal C-H bond functionalization of heterocycles remained extremely challenging with covalently attached directing groups (DG). Lack of proper site for DG attachment and inherent catalyst poisoning by heterocycles demand alternate routes for site selective functionalization of their distal C-H bonds. Utilizing non-productive coordinating property to hold the heterocycle into the cavity of a template system in a host-guest manner, we report distal C-H alkylation (C-5 of quinoline and thiazole, C-7 of benzothiazole and benzoxazole) of heterocycles. Upon complexation with heterocyclic substrate, nitrile DG in template directs the metal catalyst towards close vicinity of the specific distal C-H bond of the heterocycles. Our hypothesized pathway has been supported by various X-ray crystallographically characterized intermediates.
RESUMEN
This work evaluates the effects of solvents and a block copolymer surfactant on pore structures in polyimide aerogels synthesized via sol-gel reaction process. Specifically, cross-linked polyimide gel networks are synthesized in single or mixed solvents from a combination of dimethylformamide, N-methylpyrrolidone, and dimethylacetamide and supercritically dried to obtain aerogels. The bulk density, pore size, and mechanical properties of aerogels are determined. The results show that gel times are strongly dependent on the electron acceptance ability of the solvent system and concentration of the surfactant. At longer gel times, the polyimide strands coarsen and the pores in aerogel shift from predominantly mesoporous to macroporous state with corresponding reduction in compressive modulus. The block copolymer surfactant also slows down gelation and coarsens the polyimide strands but only weakly affects the compressive modulus of the aerogels.
RESUMEN
Tensile tests of Nickel-titanium (NiTi) shape memory alloys (SMA) embedded within carbon fiber reinforced polymer matrix composite (CFRP/PMC) laminates were evaluated with simultaneous monitoring of modal acoustic emissions (MAE). Three different layup configurations utilizing two different thin film adhesives were applied to bond the materials. Ultimate tensile strengths, strains, and moduli were obtained along with cumulative AE energy of events and specimen failure location. Scanning electron microscopy was used to examine the break areas of the specimens post-test. Microscopy was used to validate failure locations revealed from MAE analysis. 90° plies in the outer ply gave the strongest acoustic signals as well as the cleanest fracture of the specimens tested. Overlapping 0° ply layers surrounding the SMA was found to be the best scenario to prevent failure of the specimen itself.
RESUMEN
The water-in-oil emulsion-templating method is used in this work for fabrication of open cell aerogel foams from syndiotactic polystyrene (sPS). A surfactant-stabilized emulsion is prepared at 60-100 °C by dispersing water in a solution of sPS in toluene. sPS gel, formed upon cooling of the emulsion to room temperature, locks the water droplets inside the gel. The gel is solvent exchanged in ethanol and then dried under supercritical condition of carbon dioxide to yield the aerogel foams. The aerogel foams show a significant fraction of macropores with a diameter of a few tens of micrometers, defined as macrovoids that originated from the emulsified water droplets. In conjunction, customary macropores of diameter 50-200 nm are derived from sPS gels. The macrovoids add additional openness to the aerogel structures. This paper evaluates the structural characteristics of the macrovoids, such as diameter distribution, macrovoid interconnect density, and skin layer density, in conjunction with the final aerogel foam properties.
RESUMEN
This paper reports preparation of polymer aerogel microparticles via sol-gel reactions inside micrometer size droplets created in an oil-in-oil emulsion system. The oil-in-oil emulsion system is obtained by dispersing in cyclohexane the droplets of the sols of polybenzoxazine (PBZ) or polyimide (PI) prepared in dimethylformamide. The sol droplets transform into harder gel microparticles due to sol-gel reactions. Finally, the aerogel microparticles are recovered using supercritical drying of the gel microparticles. The PBZ and PI aerogel microparticles prepared in this manner show mean diameter 32.7 and 40.0 µm, respectively, mesoporous internal structures, and surface area 55.4 and 512.0 m(2)/g, respectively. Carbonization of PBZ aerogel microparticles maintains the mesoporous internal structures but yields narrower pore size distribution.
RESUMEN
A simple base and ligand free copper catalyzed method for the construction of trifluoromethylated benzoxazines has been developed by using Umemoto's reagent. It involves the oxidative difunctionalization of alkenes through tandem C-O and C-CF3 bond formations. Furthermore, synthesized benzoxazines were selectively converted into trifluoromethylated allylic and (E)-vinylic benzamides by the treatment of KO(t)Bu and CH3Li, respectively.
Asunto(s)
Alquenos/química , Benzoxazinas/química , Benzoxazinas/síntesis química , Cobre/química , Catálisis , Técnicas de Química Sintética , MetilaciónRESUMEN
Poly-ADP-ribosylation is an important protein post-translational modification with diverse biological consequences. After binding poly-ADP-ribose on axis inhibition protein 1 (AXIN1) through its WWE domain, RING finger protein 146 (RNF146) can ubiquitinate AXIN1 and promote its proteasomal degradation and thus the oncogenic WNT signaling. Therefore, inhibiting the RNF146 WWE domain is a potential antitumor strategy. However, due to a lack of suitable screening methods, no inhibitors for this domain have been reported. Here, we developed a fluorescence polarization (FP)-based competition assay for the screening of RNF146 WWE inhibitors. This assay relies on a fluorescently tagged iso-ADP-ribose tracer compound, TAMRA-isoADPr. We report the design and synthesis of this tracer compound and show that it is a high-affinity tracer for the RNF146 WWE domain. This provides a convenient assay and will facilitate the development of small-molecule inhibitors for the RNF146 WWE domain.
Asunto(s)
Adenosina Difosfato Ribosa , Poli Adenosina Difosfato Ribosa , Adenosina Difosfato Ribosa/metabolismo , Poli Adenosina Difosfato Ribosa/química , Poli Adenosina Difosfato Ribosa/metabolismo , Procesamiento Proteico-Postraduccional , Vía de Señalización WntRESUMEN
Viral macrodomains that can bind to or hydrolyze protein adenosine diphosphate ribosylation (ADP-ribosylation) have emerged as promising targets for antiviral drug development. Many inhibitor development efforts have been directed against the severe acute respiratory syndrome coronavirus 2 macrodomain 1 (SARS-CoV-2 Mac1). However, potent inhibitors for viral macrodomains are still lacking, with the best inhibitors still in the micromolar range. Based on GS-441524, a remdesivir precursor, and our previous studies, we have designed and synthesized potent binders of SARS-CoV-2 Mac1 and other viral macrodomains including those of Middle East respiratory syndrome coronavirus (MERS-CoV), Venezuelan equine encephalitis virus (VEEV), and Chikungunya virus (CHIKV). We show that the 1'-CN group of GS-441524 promotes binding to all four viral macrodomains tested while capping the 1â³-OH of GS-441524-diphosphate-ribose with a simple phenyl ring further contributes to binding. Incorporating these two structural features, the best binders show 20- to 6000-fold increases in binding affinity over ADP-ribose for SARS-CoV-2, MERS-CoV, VEEV, and CHIKV macrodomains. Moreover, building on these potent binders, we have developed two highly sensitive fluorescence polarization tracers that only require nanomolar proteins and can effectively resolve the binding affinities of nanomolar inhibitors. Our findings and probes described here will facilitate future development of more potent viral macrodomain inhibitors.
Asunto(s)
Antivirales , Polarización de Fluorescencia , SARS-CoV-2 , Humanos , Adenosina Difosfato Ribosa/metabolismo , Adenosina Difosfato Ribosa/química , Adenosina Monofosfato/análogos & derivados , Adenosina Monofosfato/química , Adenosina Monofosfato/farmacología , Adenosina Monofosfato/metabolismo , Antivirales/farmacología , Antivirales/química , Antivirales/metabolismo , Virus Chikungunya/efectos de los fármacos , COVID-19/virología , Tratamiento Farmacológico de COVID-19 , Virus de la Encefalitis Equina Venezolana/efectos de los fármacos , Virus de la Encefalitis Equina Venezolana/metabolismo , Coronavirus del Síndrome Respiratorio de Oriente Medio , Unión Proteica , Dominios Proteicos , SARS-CoV-2/efectos de los fármacosRESUMEN
This study evaluates a method for rendering syndiotactic polystyrene (sPS) aerogels hydrophilic using polyethylene oxide (PEO) of different molecular weights. The highly porous sPS aerogels are inherently hydrophobic although applications involving absorption of moisture and removal of particulate solids may benefit from the high surface area of sPS aerogels provided some degree of hydrophilicity is induced in these materials. In this work, sPS gels are prepared by thermo-reversible gelation in tetrahydrofuran in the presence of PEO. The gels are dried under supercritical conditions to obtain aerogels. The aerogels are characterized by scanning electron microscopy, nitrogen-adsorption porosimetry, helium pycnometry, and contact angle measurements. The data reveal that the pore structures and surface energy can be controlled by varying the concentration and molecular weight of PEO and using different cooling rates during thermo-reversible gelation. In the first case, sPS aerogels, aerogels containing PEO of a low molecular weight or low concentration show superhydrophobic surface presenting the "lotus effect". In the second case, PEO at a higher concentration or with higher molecular weight forms phase-separated domains yielding new hydrophilic macropores (>10 µm) in the aerogel structures. These macropores contribute to the superhydrophobic surface with the "petal effect". The cooling rate during gelation shows a strong influence on these two cases.
Asunto(s)
Poliestirenos/química , Geles/química , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Proper selection of silane precursors and polymer reinforcements yields more durable and stronger silica aerogels. This paper focuses on the use of silane-end-capped urethane prepolymer and chain-extended polyurethane for reinforcement of silica aerogels. The silane end groups were expected to participate in silica network formation and uniquely determine the amounts of urethanes incorporated into the aerogel network as reinforcement. The aerogels were prepared by one-step sol-gel process from mixed silane precursors tetraethoxysilane, aminopropyltriethoxysilane (APTES), and APTES-end-capped polyurethanes. The morphology and mechanical and surface properties of the resultant aerogels were investigated in addition to elucidation of chemical structures by solid-state (13)C and (29)Si nuclear magnetic resonance. Modification by 10 wt % APTES-end-capped chain-extended polyurethane yielded a 5-fold increase in compressive modulus and 60% increase in density. APTES-end-capped chain-extended polyurethane was found to be more effective in enhancement of mechanical properties and reduction of polarity.
Asunto(s)
Geles/química , Poliuretanos/química , Silanos/química , Dióxido de Silicio/química , Estructura Molecular , Tamaño de la Partícula , Poliuretanos/síntesis química , Propiedades de SuperficieRESUMEN
Maintaining homeostasis of metabolites such as amino acids is critical for cell survival. Dysfunction of nutrient balance can result in human diseases such as diabetes. Much remains to be discovered about how cells transport, store, and utilize amino acids due to limited research tools. Here we developed a novel, pan-amino acid fluorescent turn-on sensor, NS560. It detects 18 of the 20 proteogenic amino acids and can be visualized in mammalian cells. Using NS560, we identified amino acids pools in lysosomes, late endosomes, and surrounding the rough endoplasmic reticulum. Interestingly, we observed amino acid accumulation in large cellular foci after treatment with chloroquine, but not with other autophagy inhibitors. Using a biotinylated photo-cross-linking chloroquine analog and chemical proteomics, we identified Cathepsin L (CTSL) as the chloroquine target leading to the amino acid accumulation phenotype. This study establishes NS560 as a useful tool to study amino acid regulation, identifies new mechanisms of action of chloroquine, and demonstrates the importance of CTSL regulation of lysosomes.
RESUMEN
Viral macrodomains, which can bind to and/or hydrolyze adenine diphosphate ribose (ADP-ribose or ADPr) from proteins, have been suggested to counteract host immune response and be viable targets for the development of antiviral drugs. Therefore, developing high-throughput screening (HTS) techniques for macrodomain inhibitors is of great interest. Herein, using a novel tracer TAMRA-ADPr, an ADP-ribose compound conjugated with tetramethylrhodamine, we developed a robust fluorescence polarization assay for various viral and human macrodomains including SARS-CoV-2 Macro1, VEEV Macro, CHIKV Macro, human MacroD1, MacroD2, and PARP9 Macro2. Using this assay, we validated Z8539 (IC50 6.4 µM) and GS441524 (IC50 15.2 µM), two literature-reported small-molecule inhibitors of SARS-CoV-2 Macro1. Our data suggest that GS441524 is highly selective for SARS-CoV-2 Macro1 over other human and viral macrodomains. Furthermore, using this assay, we identified pNP-ADPr (ADP-ribosylated p-nitrophenol, IC50 370 nM) and TFMU-ADPr (ADP-ribosylated trifluoromethyl umbelliferone, IC50 590 nM) as the most potent SARS-CoV-2 Macro1 binders reported to date. An X-ray crystal structure of SARS-CoV-2 Macro1 in complex with TFMU-ADPr revealed how the TFMU moiety contributes to the binding affinity. Our data demonstrate that this fluorescence polarization assay is a useful addition to the HTS methods for the identification of macrodomain inhibitors.
Asunto(s)
COVID-19 , SARS-CoV-2 , Humanos , Adenosina Difosfato , Adenosina Difosfato Ribosa/metabolismo , Polarización de Fluorescencia , SARS-CoV-2/metabolismoRESUMEN
This study evaluated polyhedral oligomeric silsesquioxane (POSS) molecules as useful, multifunctional reinforcing agents of silica aerogels. Silica aerogels have low-density and high surface area, although their durability is often compromised by the inherent fragility and strong moisture absorption behavior of the silica networks. POSS molecules carrying phenyl, iso-butyl, and cyclohexyl organic side groups, and several Si-OH functionalities were incorporated into silica networks via reactions between Si-OH functionalities in POSS molecules and silanes. Solid state (13)C and (29)Si NMR spectra established that greater than 90% of POSS molecules grafted onto silica networks and led to an increase in fractal dimensions. An almost 6-fold increase in compressive modulus was achieved with less than 5 wt % trisilanol phenyl POSS, and a 50-fold decrease in polarity with negligible changes in density were seen in aerogels modified with less than 5 wt % trisilanol isobutyl POSS.