Photochemical Acceleration of Ammonia Production by Pt1-Ptn-TiN Reduction and N2 Activation.

Stable metal nitrides (MN) are promising materials to fit the future "green" ammonia-hydrogen nexus. Either through catalysis or chemical looping, the reductive hydrogenation of MN to MN1-x is a necessary step to generate ammonia. However, encumbered by the formation of kinetically stable M-NH1─3 surface species, this reduction step remains challenging under mild conditions. Herein, we discovered that deleterious Ti-NH1─3 accumulation on TiN can be circumvented photochemically with supported single atoms and clusters of platinum (Pt1-Ptn) under N2-H2 conditions. The photochemistry of TiN selectively promoted Ti-NH formation, while Pt1-Ptn effectively transformed any formed Ti-NH into free ammonia. The generated ammonia was found to originate mainly from TiN reduction with a minor contribution from N2 activation. The knowledge accrued from this fundamental study could serve as a springboard for the development of MN materials for more efficient ammonia production to potentially disrupt the century-old fossil-powered Haber-Bosch process.

Pt Atomic Layers with Tensile Strain and Rich Defects Boost Ethanol Electrooxidation.

Surface and strain engineering are two effective strategies to improve performance; however, synergetic controls of surface and strain effects remains a grand challenge. Herein, we report a highly efficient and stable electrocatalyst with defect-rich Pt atomic layers coating an ordered Pt3Sn intermetallic core. Pt atomic layers enable the generation of 4.4% tensile strain along the [001] direction. Benefiting from synergetic controls of surface and strain engineering, Pt atomic-layer catalyst (Ptatomic-layer) achieves a remarkable enhancement on ethanol electrooxidation performance with excellent specific activity of 5.83 mA cm-2 and mass activity of 1166.6 mA mg Pt-1, which is 10.6 and 3.6 times higher than the commercial Pt/C, respectively. Moreover, the intermetallic core endows Ptatomic-layer with outstanding durability. In situ infrared reflection-absorption spectroscopy as well as density functional theory calculations reveal that tensile strain and rich defects of Ptatomci-layer facilitate to break C-C bond for complete ethanol oxidation for enhanced performance.

Atomic-Level Regulation of Cobalt Single-Atom Nanozymes: Engineering High-Efficiency Catalase Mimics.

Nanozymes aim to mimic the highly evolved active centers of natural enzymes. Despite progress in nanozyme engineering, their catalytic performance is much less favorable compared with natural enzymes. This study shows that precise control over the atomic configuration of the active centers of Co single-atom nanozymes (SAzymes) enables the rational regulation of their catalase-like performance guided by theorical calculations. The constructed Co-N3 PS SAzyme exhibits an excellent catalase-like activity and kinetics, exceeding the representative controls of Co-based SAzymes with different atomic configurations. Moreover, we developed an ordered structure-oriented coordination design strategy for rationally engineering SAzymes and established a correlation between the structure and enzyme-like performance. This work demonstrates that precise control over the active centers of SAzymes is an efficient strategy to mimic the highly evolved active sites of natural enzymes.

Chemical Synthesis of Single Atomic Site Catalysts.

Manipulating metal atoms in a controllable way for the synthesis of materials with the desired structure and properties is the holy grail of chemical synthesis. The recent emergence of single atomic site catalysts (SASC) demonstrates that we are moving toward this goal. Owing to the maximum efficiency of atom-utilization and unique structures and properties, SASC have attracted extensive research attention and interest. The prerequisite for the scientific research and practical applications of SASC is to fabricate highly reactive and stable metal single atoms on appropriate supports. In this review, various synthetic strategies for the synthesis of SASC are summarized with concrete examples highlighting the key issues of the synthesis methods to stabilize single metal atoms on supports and to suppress their migration and agglomeration. Next, we discuss how synthesis conditions affect the structure and catalytic properties of SASC before ending this review by highlighting the prospects and challenges for the synthesis as well as further scientific researches and practical applications of SASC.

Well-Defined Materials for Heterogeneous Catalysis: From Nanoparticles to Isolated Single-Atom Sites.

The use of well-defined materials in heterogeneous catalysis will open up numerous new opportunities for the development of advanced catalysts to address the global challenges in energy and the environment. This review surveys the roles of nanoparticles and isolated single atom sites in catalytic reactions. In the second section, the effects of size, shape, and metal-support interactions are discussed for nanostructured catalysts. Case studies are summarized to illustrate the dynamics of structure evolution of well-defined nanoparticles under certain reaction conditions. In the third section, we review the syntheses and catalytic applications of isolated single atomic sites anchored on different types of supports. In the final part, we conclude by highlighting the challenges and opportunities of well-defined materials for catalyst development and gaining a fundamental understanding of their active sites.

Thermal Atomization of Platinum Nanoparticles into Single Atoms: An Effective Strategy for Engineering High-Performance Nanozymes.

Although great progress has been made in artificial enzyme engineering, their catalytic performance is far from satisfactory as alternatives of natural enzymes. Here, we report a novel and efficient strategy to access high-performance nanozymes via direct atomization of platinum nanoparticles (Pt NPs) into single atoms by reversing the thermal sintering process. Atomization of Pt NPs into single atoms makes metal catalytic sites fully exposed and results in engineerable structural and electronic properties, thereby leading to dramatically enhanced enzymatic performance. As expected, the as-prepared thermally stable Pt single-atom nanozyme (PtTS-SAzyme) exhibited remarkable peroxidase-like catalytic activity and kinetics, far exceeding the Pt nanoparticle nanozyme. The following density functional theory calculations revealed that the engineered P and S atoms not only promote the atomization process from Pt NPs into PtTS-SAzyme but also endow single-atom Pt catalytic sites with a unique electronic structure owing to the electron donation of P atoms, as well as the electron acceptance of N and S atoms, which simultaneously contribute to the substantial enhancement of the enzyme-like catalytic performance of PtTS-SAzyme. This work demonstrates that thermal atomization of the metal nanoparticle-based nanozymes into single-atom nanozymes is an effective strategy for engineering high-performance nanozymes, which opens up a new way to rationally design and optimize artificial enzymes to mimic natural enzymes.

Atomic-Level Modulation of Electronic Density at Cobalt Single-Atom Sites Derived from Metal-Organic Frameworks: Enhanced Oxygen Reduction Performance.

Demonstrated here is the correlation between atomic configuration induced electronic density of single-atom Co active sites and oxygen reduction reaction (ORR) performance by combining density-functional theory (DFT) calculations and electrochemical analysis. Guided by DFT calculations, a MOF-derived Co single-atom catalyst with the optimal Co1 -N3 PS active moiety incorporated in a hollow carbon polyhedron (Co1 -N3 PS/HC) was designed and synthesized. Co1 -N3 PS/HC exhibits outstanding alkaline ORR activity with a half-wave potential of 0.920 V and superior ORR kinetics with record-level kinetic current density and an ultralow Tafel slope of 31 mV dec-1 , exceeding that of Pt/C and almost all non-precious ORR electrocatalysts. In acidic media the ORR kinetics of Co1 -N3 PS/HC still surpasses that of Pt/C. This work offers atomic-level insight into the relationship between electronic density of the active site and catalytic properties, promoting rational design of efficient catalysts.

Adsorption Site Regulation to Guide Atomic Design of Ni-Ga Catalysts for Acetylene Semi-Hydrogenation.

Atomic regulation of metal catalysts has emerged as an intriguing yet challenging strategy to boost product selectivity. Here, we report a density functional theory-guided atomic design strategy for the fabrication of a NiGa intermetallic catalyst with completely isolated Ni sites to optimize acetylene semi-hydrogenation processes. Such Ni sites show not only preferential acetylene π-adsorption, but also enhanced ethylene desorption. The characteristics of the Ni sites are confirmed by multiple characterization techniques, including aberration-corrected high-resolution scanning transmission electron microscopy and X-ray absorption spectrometry measurements. The superior performance is also confirmed experimentally against a Ni5 Ga3 intermetallic catalyst with partially isolated Ni sites and against a Ni catalyst with multi-atomic ensemble Ni sites. Accordingly, the NiGa intermetallic catalyst with the completely isolated Ni sites shows significantly enhanced selectivity to ethylene and suppressed coke formation.

Rare-Earth Single Erbium Atoms for Enhanced Photocatalytic CO2 Reduction.

The solar-driven photocatalytic reduction of CO2 (CO2 RR) into chemical fuels is a promising route to enrich energy supplies and mitigate CO2 emissions. However, low catalytic efficiency and poor selectivity, especially in a pure-water system, hinder the development of photocatalytic CO2 RR owing to the lack of effective catalysts. Herein, we report a novel atom-confinement and coordination (ACC) strategy to achieve the synthesis of rare-earth single erbium (Er) atoms supported on carbon nitride nanotubes (Er1 /CN-NT) with a tunable dispersion density of single atoms. Er1 /CN-NT is a highly efficient and robust photocatalyst that exhibits outstanding CO2 RR performance in a pure-water system. Experimental results and density functional theory calculations reveal the crucial role of single Er atoms in promoting photocatalytic CO2 RR.

Engineering the Atomic Interface with Single Platinum Atoms for Enhanced Photocatalytic Hydrogen Production.

It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron-hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO2 support (Pt1 /def-TiO2 ). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO2 units to generate surface oxygen vacancies and form a Pt-O-Ti3+ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt-O-Ti3+ atomic interface effectively facilitates photogenerated electrons to transfer from Ti3+ defective sites to single Pt atoms, thereby enhancing the separation of electron-hole pairs. This unique structure makes Pt1 /def-TiO2 exhibit a record-level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h-1 , exceeding the Pt nanoparticle supported TiO2 catalyst by a factor of 591.

Bismuth Single Atoms Resulting from Transformation of Metal-Organic Frameworks and Their Use as Electrocatalysts for CO2 Reduction.

The electrocatalytic reduction reaction of CO2 (CO2RR) is a promising strategy to promote the global carbon balance and combat global climate change. Herein, exclusive Bi-N4 sites on porous carbon networks can be achieved through thermal decomposition of a bismuth-based metal-organic framework (Bi-MOF) and dicyandiamide (DCD) for CO2RR. Interestingly, in situ environmental transmission electron microscopy (ETEM) analysis not only directly shows the reduction from Bi-MOF into Bi nanoparticles (NPs) but also exhibits subsequent atomization of Bi NPs assisted by the NH3 released from the decomposition of DCD. Our catalyst exhibits high intrinsic CO2 reduction activity for CO conversion, with a high Faradaic efficiency (FECO up to 97%) and high turnover frequency of 5535 h-1 at a low overpotential of 0.39 V versus reversible hydrogen electrode. Further experiments and density functional theory results demonstrate that the single-atom Bi-N4 site is the dominating active center simultaneously for CO2 activation and the rapid formation of key intermediate COOH* with a low free energy barrier.

Sohlh2 inhibits breast cancer cell proliferation by suppressing Wnt/ß-catenin signaling pathway.

Sohlh2 belongs to the superfamily of basic helix-loop-helix (bhlh) transcription factors. Aberrant expression of bhlh transcription factors has been shown to be associated with multiple tumorigenesis. We previously identified that sohlh2 functioned as a tumor suppressor in ovarian cancer. Here, we examined the expression levels of sohlh2 in human breast cancer and its potential role in disease pathogenesis. The results of sohlh2 immunohistochemistry (IHC) and Western blot analysis demonstrated the decreased sohlh2 expression in breast cancer specimens as compared to adjacent noncancerous tissues. Through in vitro MTT, BrdU, colony formation and cell cycle assays and in vivo tumor xenograft studies, we showed that forced expression of sohlh2 led to a significant reduction in proliferation due to G1 arrest in vitro and tumorigenesis in nude mice. Conversely, silencing of sohlh2 enhanced breast cancer cell proliferation. Furthermore, we confirmed that sohlh2 inhibited breast cancer cell proliferation by suppressing the Wnt/ß-catenin signaling pathway. APC was the direct target of sohlh2, and mediated the inhibitory activities of sohlh2 on Wnt/ß-catenin signaling pathway. Thus, our data indicate that sohlh2 likely functions as a tumor suppressor in breast cancer that is mediated by repressing Wnt/ß-catenin signaling pathway via upregulation of APC expression.

Atomically Dispersed Ruthenium Species Inside Metal-Organic Frameworks: Combining the High Activity of Atomic Sites and the Molecular Sieving Effect of MOFs.

Incorporating atomically dispersed metal species into functionalized metal-organic frameworks (MOFs) can integrate their respective merits for catalysis. A cage-controlled encapsulation and reduction strategy is used to fabricate single Ru atoms and triatomic Ru3 clusters anchored on ZIF-8 (Ru1 @ZIF-8, Ru3 @ZIF-8). The highly efficient and selective catalysis for semi-hydrogenation of alkyne is observed. The excellent activity derives from high atom-efficiency of atomically dispersed Ru active sites and hydrogen enrichment by the ZIF-8 shell. Meanwhile, ZIF-8 shell serves as a novel molecular sieve for olefins to achieve absolute regioselectivity of catalyzing terminal alkynes but not internal alkynes. Moreover, the size-dependent performance between Ru3 @ZIF-8 and Ru1 @ZIF-8 is detected in experiment and understood by quantum-chemical calculations, demonstrating a new and promising approach to optimize catalysts by controlling the number of atoms.

Discovering Partially Charged Single-Atom Pt for Enhanced Anti-Markovnikov Alkene Hydrosilylation.

The hydrosilylation reaction is one of the largest-scale application of homogeneous catalysis and is widely used to enable the commercial manufacture of silicon products. However, considerable issues including disposable platinum consumption, undesired side reactions and unacceptable catalyst residues still remain. Here, we synthesize a heterogeneous partially charged single-atom platinum supported on anatase TiO2 (Pt1δ+/TiO2) catalyst via an electrostatic-induction ion exchange and two-dimensional confinement strategy, which can catalyze hydrosilylation reaction with almost complete conversion and produce exclusive adduct. Density functional theory calculations reveal that unexpected property of Pt1δ+/TiO2 originates from atomic dispersion of active species and unique partially positive charge Ptδ+ electronic structure that conventional nanocatalysts do not possess. The fabrication of single-atom Pt1δ+/TiO2 catalyst accomplishes a reasonable use of Pt through recycling and maximum atom-utilized efficiency, indicating the potential to achieve a green hydrosilylation industry.

Confined Pyrolysis within Metal-Organic Frameworks To Form Uniform Ru3 Clusters for Efficient Oxidation of Alcohols.

Here we report a novel approach to synthesize atomically dispersed uniform clusters via a cage-separated precursor preselection and pyrolysis strategy. To illustrate this strategy, well-defined Ru3(CO)12 was separated as a precursor by suitable molecular-scale cages of zeolitic imidazolate frameworks (ZIFs). After thermal treatment under confinement in the cages, uniform Ru3 clusters stabilized by nitrogen species (Ru3/CN) were obtained. Importantly, we found that Ru3/CN exhibits excellent catalytic activity (100% conversion), high chemoselectivity (100% for 2-aminobenzaldehyde), and significantly high turnover frequency (TOF) for oxidation of 2-aminobenzyl alcohol. The TOF of Ru3/CN (4320 h-1) is about 23 times higher than that of small-sized (ca. 2.5 nm) Ru particles (TOF = 184 h-1). This striking difference is attributed to a disparity in the interaction between Ru species and adsorbed reactants.

High-Performance Rh2P Electrocatalyst for Efficient Water Splitting.

The search for active, stable, and cost-efficient electrocatalysts for hydrogen production via water splitting could make a substantial impact on energy technologies that do not rely on fossil fuels. Here we report the synthesis of rhodium phosphide electrocatalyst with low metal loading in the form of nanocubes (NCs) dispersed in high-surface-area carbon (Rh2P/C) by a facile solvo-thermal approach. The Rh2P/C NCs exhibit remarkable performance for hydrogen evolution reaction and oxygen evolution reaction compared to Rh/C and Pt/C catalysts. The atomic structure of the Rh2P NCs was directly observed by annular dark-field scanning transmission electron microscopy, which revealed a phosphorus-rich outermost atomic layer. Combined experimental and computational studies suggest that surface phosphorus plays a crucial role in determining the robust catalyst properties.

Isolated Single Iron Atoms Anchored on N-Doped Porous Carbon as an Efficient Electrocatalyst for the Oxygen Reduction Reaction.

The development of low-cost, efficient, and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. Herein, we made a highly reactive and stable isolated single-atom Fe/N-doped porous carbon (ISA Fe/CN) catalyst with Fe loading up to 2.16 wt %. The catalyst showed excellent ORR performance with a half-wave potential (E1/2 ) of 0.900 V, which outperformed commercial Pt/C and most non-precious-metal catalysts reported to date. Besides exceptionally high kinetic current density (Jk ) of 37.83 mV cm-2 at 0.85 V, it also had a good methanol tolerance and outstanding stability. Experiments demonstrated that maintaining the Fe as isolated atoms and incorporating nitrogen was essential to deliver the high performance. First principle calculations further attributed the high reactivity to the high efficiency of the single Fe atoms in transporting electrons to the adsorbed OH species.

Protein palmitoylation activate zygotic gene expression during the maternal-to-zygotic transition.

Upon fertilization, maternal factors direct development and trigger zygotic genome activation at the maternal-to-zygotic transition (MZT). However, the factors that activate the zygotic program in vertebrates are not well defined. Here, we found that protein palmitoylation played an important role in acquiring transcriptional competency and orchestrating the clearance of the maternal program in zebrafish. After inhibition of protein palmitoylation, zebrafish embryos developed normally before the Mid-Blastula Transition (MBT); however, they did not initiate epiboly. Moreover, our results showed that protein palmitoylation is required to initiate the zygotic developmental program and induce clearance of the maternal program by activating miR-430 expression.

Sohlh2 inhibits human ovarian cancer cell invasion and metastasis by transcriptional inactivation of MMP9.

Identifying key mediators of cancer invasion and metastasis is crucial to the development of new and more effective therapies. We previously identified Sohlh2 as an important inhibitor of ovarian cancer cell proliferation. However, the function of Sohlh2 in cell migration and invasion remains unknown. In this paper, we report a novel Sohlh2 to MMP9 signaling pathway in the invasive ovarian cancer. Using immunohistochemistry staining, we revealed Sohlh2 expression was inversely correlated with the invasive human ovarian cancers. In vitro experiments, forced expression of Sohlh2 led to a significant reduction in cancer cell migration and invasion. Conversely, silencing of Sohlh2 enhanced ovarian cancer cell migration and invasion. Experiments using nude mice demonstrated that the ectopic Sohlh2 expression inhibited the HO8910 cell capability of the metastasis to the lungs and livers. Ectopic overexpression of Sohlh2 in the invasive HO8910 cells reduced the MMP9 expression, whereas Sohlh2 knockdown from the non-invasive, SKOV3 cells increased the MMP9 expression. Promoter activation and binding analyses indicated that Sohlh2 repressed the MMP9 expression by directly acting on the MMP9 gene promoter. Inhibition of MMP9 dramatically blocked the Sohlh2 knockdown-enhanced SKOV3 cell invasion, and ectopic expression of MMP9 compensated for the anti-invasive activity of Sohlh2 in HO8910 cells. Overall, these results demonstrate for the first time that Sohlh2 functions as a tumor metastasis suppressor. Modulation of Sohlh2 expression has the potential to be a target for cancer therapy. © 2015 Wiley Periodicals, Inc.