RESUMEN
The widespread presence of formaldehyde (HCHO) pollutant has aroused significant environmental and health concerns. The catalytic oxidation of HCHO into CO2 and H2O at ambient temperature is regarded as one of the most efficacious and environmentally friendly approaches; to achieve this, however, accelerating the intermediate formate species formation and decomposition remains an ongoing obstacle. Herein, a unique tandem catalytic system with outstanding performance in low-temperature HCHO oxidation is proposed on well-structured Pd/Mn3O4-MnO catalysts possessing bifunctional catalytic centers. Notably, the optimized tandem catalyst achieves complete oxidation of 100 ppm of HCHO at just 18 °C, much better than the Pd/Mn3O4 (30%) and Pd/MnO (27%) counterparts as well as other physical tandem catalysts. The operando analyses and physical tandem investigations reveal that HCHO is primarily activated to gaseous HCOOH on the surface of Pd/Mn3O4 and subsequently converted to H2CO3 on the Pd/MnO component for deep decomposition. Theoretical studies disclose that Pd/Mn3O4 exhibits a favorable reaction energy barrier for the HCHO â HCOOH step compared to Pd/MnO; while conversely, the HCOOH â H2CO3 step is more facilely accomplished over Pd/MnO. Furthermore, the nanoscale intimacy between two components enhances the mobility of lattice oxygen, thereby facilitating interfacial reconstruction and promoting interaction between active sites of Pd/Mn3O4 and Pd/MnO in local vicinity, which further benefits sustained HCHO tandem catalytic oxidation. The tandem catalysis demonstrated in this work provides a generalizable platform for the future design of well-defined functional catalysts for oxidation reactions.
Asunto(s)
Formaldehído , Paladio , Temperatura , Dominio Catalítico , Oxidación-Reducción , Catálisis , Paladio/químicaRESUMEN
Light alkanes (LAs), typical VOCs existing in both stationary and mobile sources, pose significant environmental concerns. Although noble metal catalysts demonstrate strong C-H bond activation, their effectiveness in degrading LAs is hindered by inherent challenges, including poor chemical stability and water resistance. Here, from a new perspective, we propose a feasible strategy that adjusting the metal bond lengths within Pd clusters through partial substitution of smaller radius 3d transition metals (3dTMs) to prioritize the activation of low-energy C-C bonds within LAs. Benefiting from this, PdCo/CeO2 exhibits exceptional catalytic performance in propane degradation due to their high capacity for C-C cleavage stemming from the shorter Pd-Co length (2.51 Å) and lower coordination number (1.73), boosting the activation of α-H and ß-H of propane simultaneously and accelerating the mobility of postactivated oxygen species to prevent Pd center deep oxidation. The presence of 3dTMs on Pd clusters improves the redox and charge transfer ability of catalysts, resulting in an amplified generation of oxygen vacancies and facilitating the adsorption and activation of reactants. Mechanistic studies and DFT calculations suggest that the substitution of 3dTMs significantly accelerate C-C bond cleavage within C3 intermediates to generate the subsequent C2 and C1 intermediates, suppressing the generation of harmful byproducts.
RESUMEN
Oxygenated volatile organic compounds (OVOCs), emitted in large quantities by the chemical industry, are a major contributor to the formation of ozone and subsequent particulate matter. For the efficient catalytic oxidation of OVOCs, the challenges of molecular activation and intermediate inhibition remain. The construction of bifunctional active sites with specific structures offers a promising way to overcome these problems. Here, the Pd@Layered-CoOx/MFI bifunctional catalyst with core-shell active sites was rationally fabricated though a two-step ligand pyrolysis method, which exhibits a superb oxidation efficiency toward ethyl acetate (EA). Over this, 13.4% of EA (1000 ppm) can be oxidized at just 140 °C with a reaction rate of 13.85 mmol·gPd-1·s-1, around 176.7 times higher than that of the conventional Pd-CoOx/MFI catalyst. The electronic coupling of the Pd-Co pair promotes the electron back-donation from Pd nanoparticles to the layered CoOx shell and facilitates the formation of Pd2+ species, which greatly enhances the adsorption and activation of the electron-rich CâO bond of the EA molecules. In addition, the synergy of these core-shell Pd@Layered-CoOx sites accelerates the activation and transformation of *O species, which inhibit the formation of acetaldehyde and ethanol byproducts, ensuring the rapid total oxidation of EA molecules via the Mars-van Krevelen mechanism. This work established a solid foundation for exploring robust bifunctional catalysts for deep OVOC purification.
Asunto(s)
Oxidación-Reducción , Catálisis , Paladio/química , Compuestos Orgánicos Volátiles/química , Acetatos/químicaRESUMEN
The development of highly active single-atom catalysts (SACs) and identifying their intrinsic active sites in oxidizing industrial hazardous hydrocarbons are challenging prospects. Tuning the electronic metal-support interactions (EMSIs) is valid for modulating the catalytic performance of SACs. We propose that the modulation of the EMSIs in a Pt1 -CuO SAC significantly promotes the activity of the catalyst in acetone oxidation. The EMSIs promote charge redistribution through the unified Pt-O-Cu moieties, which modulates the d-band structure of atomic Pt sites, and strengthens the adsorption and activation of reactants. The positively charged Pt atoms are superior for activating acetone at low temperatures, and the stretched Cu-O bonds facilitate the activation of lattice oxygen atoms to participate in subsequent oxidation. We believe that this work will guide researchers to engineer efficient SACs for application in hydrocarbon oxidation reactions.
RESUMEN
Mn3O4, FeMnOx, and FeOx catalysts synthesized via a solvothermal method were employed for catalytic oxidation of methyl-ethyl-ketone (MEK) at low temperature. Mn3O4 with sphere-like morphology exhibited the highest activity for MEK oxidation, over which MEK was completely oxidized to CO2 at 200 °C, and this result can be comparable to typical noble metal loaded catalysts. The activation energy of MEK over Mn3O4 (30.8 kJ/mol) was much lower than that of FeMnOx (41.5 kJ/mol) and FeOx (47.8 kJ/mol). The dominant planes, surface manganese species ratio, surface-absorbed oxygen, and redox capability played important roles in the catalytic activities of catalysts, while no significant correlation was found between specific surface area and MEK removal efficiency. Mn3O4 showed the highest activity, accounting for abundant oxygen vacancies, low content of surface Mn4+ and strong reducibility. The oxidation of MEK to CO2 via an intermediate of diacetyl is a reaction pathway on Mn3O4 catalyst. Due to high efficiency and low cost, sphere-shaped Mn3O4 is a promising catalyst for VOCs abatement.
Asunto(s)
Compuestos de Manganeso , Óxidos , Temperatura , Catálisis , Oxidación-Reducción , Purificación del AguaRESUMEN
Light alkanes make up a class of widespread volatile organic compounds (VOCs), bringing great environmental hazards and health concerns. However, the low-temperature catalytic destruction of light alkanes is still a great challenge to settle due to their high reaction inertness and weak polarity. Herein, a Co3O4 sub-nanometer porous sheet (Co3O4-SPS) was fabricated and comprehensively compared with its bulk counterparts in the catalytic oxidation of C3H8. Results demonstrated that abundant low-coordinated Co atoms on the Co3O4-SPS surface boost the activation of adsorbed oxygen and enhance the catalytic activity. Moreover, Co3O4-SPS has better surface metal properties, which is beneficial to electron transfer between the catalyst surface and the reactant molecules, promoting the interaction between C3H8 molecules and dissociated O atoms and facilitating the activation of C-H bonds. Due to these, Co3O4-SPS harvests a prominent performance for C3H8 destruction, 100% of which decomposed at 165 °C (apparent activation energy of 49.4 kJ mol-1), much better than the bulk Co3O4 (450 °C and 126.9 kJ mol-1) and typical noble metal catalysts. Moreover, Co3O4-SPS also has excellent thermal stability and water resistance. This study deepens the atomic-level insights into the catalytic capacity of Co3O4-SPS in light alkane purification and provides references for designing efficacious catalysts for thermocatalytic oxidation reactions.
RESUMEN
Oxygen vacancy plays an important role in adsorption and activation of oxygen species and therefore promotes the catalytic performance of materials in heterogeneous oxidation reactions. Here, a series of K-doped É-MnO2 materials with different K loadings were synthesized by a reproducible post processing process. Results show that the presence of K+ enhances the reducibility and oxygen vacancy concentration of É-MnO2 due to the break of charge balance and the formation of low valence Mn species. 4-K/MnO2 material exhibits the highest toluene oxidation activity and satisfied long-term stability and water resistance owing to its superior reducibility and abundant surface absorbed oxygen (Oads). In situ DRIFTS demonstrate that Oads greatly accelerates toluene dehydrogenation rate and promotes benzoate formation, enhancing the activation and decomposition of toluene molecules. Moreover, the CC cleavage of benzene ring (forming maleic anhydride) is the rate-determining step of toluene oxidation, which can be easily occurred over 4-K/MnO2.
RESUMEN
Shape effects of nanocrystal catalysts in different reactions have attracted remarkable attention. In the present work, three types of α-Fe2O3 oxides with different micromorphologies were rationally synthesized via a facile solvothermal method and adopted in deep oxidation of ethane. The physicochemical properties of prepared materials were characterized by XRD, N2 sorption, FE-SEM, HR-TEM, FTIR, in situ DRIFTS, XPS, Mössbauer spectroscopy, in situ Raman, electron energy loss spectroscopy, and H2-TPR. Moreover, the formation energy of oxygen vacancy and surface electronic structure on various crystal faces of α-Fe2O3 were explored by DFT calculations. It is shown that nanosphere-like α-Fe2O3 exhibits much higher ethane destruction activity and reaction stability than nanocube-like α-Fe2O3 and nanorod-like α-Fe2O3 due to larger amounts of oxygen vacancies and lattice defects, which greatly enhance the concentration of reactive oxygen species, oxygen transfer speed, and material redox property. In addition to this, DFT results reveal that nanosphere-like α-Fe2O3 has the lowest formation energy of oxygen vacancy on the (110) facet ( Evo (110) = 1.97 eV) and the strongest adsorption energy for ethane (-0.26 eV) and O2 (-1.58 eV), which can accelerate the ethane oxidation process. This study has deepened the understanding of the face-dependent activities of α-Fe2O3 in alkane destruction.
RESUMEN
Catalytic behavior of Co-based/zeolites catalysts was investigated in NOx reduction by CH4. Optimization of promoter and support was investigated by catalytic tests, and the relationship between catalytic activity and catalyst structure was illustrated by catalyst characterization. Co-Fe/SAPO-34 exhibited the highest activity among various Co-base/zeolites catalysts. The maximum conversion of NOx with 52.7% was obtained on Co-Fe/SAPO-34 at 450â. The inhibition of activity of Fe/zeolites became severe in the presence of SO2, CO2, and H2O. CO2 exerted virtually no effect on the SCR activity of Co-Fe/zeolites. The inhibition of NOx conversion by H2O was reversible for Co-Fe/zeolites catalysts. Cobalt species were mainly present in CoO and Co(OH)2 states in Co-Fe/SAPO-34. Co3O4and Co(OH)2 were the main cobalt species of Co-Fe/ZSM-5, while CoO, CoAl2O4 and Co3O4 might be present in Co-Fe/Beta. The ratio of Fe2+/Fe3+ in the surface layer of Co-Fe/zeolites decreased in the order of Co-Fe/ZSM-5(3.98) > Co-Fe/SAPO-34(0.52) > Co-Fe/Beta(0.43). The active states of cobalt species and suitable ratio of Fe2+/Fe3+ were important for the activity of Co-Fe/zeolites in CH4-SCR. CH4-SCR over Co-Fe/zeolite catalysts started with the adsorption of NO and CH4 on Brønsted acid sites of the zeolite to produce NO+and carbon-containing species(-C=O and -COO) in the presence of oxygen, respectively. Subsequently, the important intermediates of nitrate species were generated from NO+ at the active sites. Finally, nitrate species reacted with carbon-containing species to form N2 and CO2.