An adaptable hydrogel array format for 3-dimensional cell culture and analysis.

Hydrogels have been commonly used as model systems for 3-dimensional (3-D) cell biology, as they have material properties that resemble natural extracellular matrices (ECMs), and their cell-interactive properties can be readily adapted in order to address a particular hypothesis. Natural and synthetic hydrogels have been used to gain fundamental insights into virtually all aspects of cell behavior, including cell adhesion, migration, and differentiated function. However, cell responses to complex 3-D environments are difficult to adequately explore due to the large number of variables that must be controlled simultaneously. Here we describe an adaptable, automated approach for 3-D cell culture within hydrogel arrays. Our initial results demonstrate that the hydrogel network chemistry (both natural and synthetic), cell type, cell density, cell adhesion ligand density, and degradability within each array spot can be systematically varied to screen for environments that promote cell viability in a 3-D context. In a test-bed application we then demonstrate that a hydrogel array format can be used to identify environments that promote viability of HL-1 cardiomyocytes, a cell line that has not been cultured previously in 3-D hydrogel matrices. Results demonstrate that the fibronectin-derived cell adhesion ligand RGDSP improves HL-1 viability in a dose-dependent manner, and that the effect of RGDSP is particularly pronounced in degrading hydrogel arrays. Importantly, in the presence of 70mum RGDSP, HL-1 cardiomyocyte viability does not decrease even after 7 days of culture in PEG hydrogels. Taken together, our results indicate that the adaptable, array-based format developed in this study may be useful as an enhanced throughput platform for 3-D culture of a variety of cell types.

Tissue-engineered mandibular bone reconstruction for continuity defects: a systematic approach to the literature.

BACKGROUND: Despite significant surgical advances over the last decades, segmental mandibular bone repair remains a challenge. In light of this, tissue engineering might offer a next step in the evolution of mandibular reconstruction. PURPOSE: The purpose of the present report was to (1) systematically review preclinical in vivo as well as clinical literature regarding bone tissue engineering for mandibular continuity defects, and (2) to analyze their effectiveness. MATERIALS AND METHODS: An electronic search in the databases of the National Library of Medicine and ISI Web of Knowledge was carried out. Only publications in English were considered, and the search was broadened to animals and humans. Furthermore, the reference lists of related review articles and publications selected for inclusion in this review were systematically screened. Results of histology data and amount of bone bridging were chosen as primary outcome variables. However, for human reports, clinical radiographic evidence was accepted for defined primary outcome variable. The biomechanical properties, scaffold degradation, and clinical wound healing were selected as co-outcome variables. RESULTS: The electronic search in the databases of the National Library of Medicine and ISI Web of Knowledge resulted in the identification of 6727 and 5017 titles, respectively. Thereafter, title assessment and hand search resulted in 128 abstracts, 101 full-text articles, and 29 scientific papers reporting on animal experiments as well as 11 papers presenting human data on the subject of tissue-engineered reconstruction of mandibular continuity defects that could be included in the present review. CONCLUSIONS: It was concluded that (1) published preclinical in vivo as well as clinical data are limited, and (2) tissue-engineered approaches demonstrate some clinical potential as an alternative to autogenous bone grafting.

Segmental mandibular bone reconstruction with a carbonate-substituted hydroxyapatite-coated modular endoprosthetic poly(ɛ-caprolactone) scaffold in Macaca fascicularis.

A bio-degradable scaffold incorporating osteoinductive factors is one of the alternative methods for achieving the regeneration of a mandibular bone defect. The current pilot study addressed such a bone reconstruction in a non-human primate model, Macaca fascicularis monkeys, with an engineered poly(ɛ-caprolactone) (PCL) scaffold, provided with a carbonate-substituted hydroxyapatite coating. The scaffolds were implanted into unilaterally created mandibular segmental defects in 24 monkeys. Three experimental groups were formed: (1) scaffolds with rhBMP-2 (n = 8), (2) scaffolds with autologous mixed bone marrow cells (n = 8), and (3) empty scaffolds as a control group (n = 8). Evaluation was based on clinical observation as well as micro-CT, mechanical, and histological analyses. Despite a high infection rate, the overall results showed that the currently designed PCL scaffolds had insufficient load-bearing capability, and complete bone union was not achieved after 6 months of implantation. Nevertheless, the group of PCL scaffolds loaded with rhBMP-2 showed evidence of bone-regenerative potential, in contrast to PCL with autologous mixed bone marrow cells and the control group.

Inorganic coatings for optimized non-viral transfection of stem cells.

"Biomimetic" approaches for heterogeneous growth of inorganic coatings have become particularly widespread in biomedical applications, where calcium phosphate (CaP) mineral coatings are used to improve biomedical implants. Changes in coating properties can influence the effects of mineral coatings on adjacent cells, but to date it has not been practical to systematically vary inorganic coating properties to optimize specific cell behaviors. Here, we present an approach to grow CaP mineral coatings in an enhanced throughput format to identify unprecedented capabilities in non-viral gene delivery. Subtle changes in coating properties resulted in widely variable transfection, and optimized coatings led to greater than 10-fold increases in transgene expression by multiple target cell types when compared to standard techniques. The enhanced transfection observed here is substrate-mediated, and related to the characteristics of the local environment near the surface of dissolving mineral coatings. These findings may be particularly translatable to medical device applications.

Subcutaneous tissue response to titanium, poly(ε-caprolactone), and carbonate-substituted hydroxyapatite-coated poly(ε-caprolactone) plates: a rabbit study.

The aim of this study was to evaluate the soft tissue response to poly(ε-caprolactone) (PCL) implants with and without carbonate-substituted hydroxyapatite (CHA) coating compared to the commonly used titanium alloy (Ti-6Al-4V)-machined surface. Experimental materials were implanted subcutaneously in New Zealand white rabbits for 5 weeks. The tissue attachment strength, as evaluated by a tissue peel test, histological and histomorphology analysis, as well as scanning electron microscopy were compared between groups. The peel test result revealed no statistically significant difference between groups. Histological analysis found fibrous capsule formation around all implant materials. The fibrous capsule around PCL implants with and without CHA coating was significantly thinner compared with the capsule thickness around the titanium implants. However, the inflammatory cells, as present at the fibrous capsule-implant interface, were found to be significantly lower in the Ti-group. In conclusion, the current data do not prove that PCL or PCL with a CHA coating results in a superior soft tissue response compared with a machined titanium implant.

Influence of FGF2 and PEG hydrogel matrix properties on hMSC viability and spreading.

In this study, three-dimensional (3-D) poly(ethylene glycol) (PEG) hydrogel arrays were used to screen for the effects of fibroblast growth factor-2 (FGF2), combined with multiple hydrogel matrix parameters, on human mesenchymal stem cell (hMSC) viability and spreading. In particular, we examined the effects of FGF2 while co-varying hydrogel matrix degradability, cell adhesion ligand type, and cell adhesion ligand density. FGF2 significantly improved viability of hMSCs in a dose-dependent manner in both nondegrading and degrading PEG hydrogels in the absence of extracellular matrix-derived cell adhesion ligands. The presence of a small molecule that inhibits autophosphorylation of the FGF2 receptor blocked the effects of FGF2 on hMSC viability in PEG hydrogels, both in the presence and absence of the Arg-Gly-Asp-Ser-Pro (RGDSP) ligand. FGF2 effects on hMSC viability were less pronounced when FGF2 was presented in combination with the RGDSP cell adhesion ligand or the IKVAV cell adhesion ligand in nondegrading PEG hydrogels. Importantly, spread hMSC morphologies were observed and quantified in a select subset of hydrogel networks, which were degradable and included both FGF2 and RGDSP. These results indicate that the hydrogel arrays described here can be used to efficiently study the influence of soluble and insoluble hydrogel matrix parameters on stem cell behavior, and to identify synthetic, 3-D environments that promote specific hMSC behaviors.

Screening for 3D environments that support human mesenchymal stem cell viability using hydrogel arrays.

In this study we generated 3D poly(ethylene glycol) (PEG) hydrogel arrays to screen for the individual and combinatorial effects of extracellular matrix (ECM) degradability, cell adhesion ligand type, and cell adhesion ligand density on human mesenchymal stem cell (hMSC) viability. In particular, we explored the influence of two well-characterized ECM-derived cell adhesion ligands: the fibronectin-derived Arg-Gly-Asp-Ser-Pro (RGDSP) sequence, and the laminin-derived Ile-Lys-Val-Ala-Val (IKVAV) sequence. PEG network degradation, the RGDSP ligand, and the IKVAV ligand each individually increased hMSC viability in a dose-dependent manner. The RGDSP ligand also improved hMSC viability in a dose-dependent manner in degradable PEG hydrogels, while the effect of IKVAV was less pronounced in degradable hydrogels. Combinations of RGDSP and IKVAV promoted high viability of hMSCs in nondegradable PEG networks, while the combined effects of the ligands were not significant in degradable PEG hydrogels. Although hMSC spreading was not commonly observed within PEG hydrogels, we qualitatively observed hMSC spreading after 5 days only in degradable PEG hydrogels prepared with 2.5 mM of both RGDSP and IKVAV. These results suggest that the enhanced throughput approach described herein can be used to rapidly study the influence of a broad range of ECM parameters, as well as their combinations, on stem cell behavior.

Growth of hydroxyapatite coatings on biodegradable polymer microspheres.

Mineral-coated microspheres were prepared via a bioinspired, heterogeneous nucleation process at physiological temperature. Poly(d,l-lactide-co-glycolide) (PLG) microspheres were fabricated via a water-in-oil-in-water emulsion method and were mineral-coated via incubation in a modified simulated body fluid (mSBF). X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy with associated energy-dispersive X-ray spectroscopy confirmed the presence of a continuous mineral coating on the microspheres. The mineral grown on the PLG microsphere surface has characteristics analogous to those of bone mineral (termed "bonelike" mineral), with a carbonate-containing hydroxyapatite phase and a porous structure of platelike crystals at the nanometer scale. The assembly of mineral-coated microspheres into aggregates was observed when microsphere concentrations above 0.50 mg/mL were incubated in mSBF for 7 days, and the size of the aggregates was dependent on the microsphere concentration in solution. In vitro mineral dissolution studies performed in Tris-buffered saline confirmed that the mineral formed was resorbable. A surfactant additive (Tween 20) was incorporated into mSBF to gain insight into the mineral growth process, and Tween 20 not only prevented aggregation but also significantly inhibited mineral formation and influenced the characteristics of the mineral formed on the surface of PLG microspheres. Taken together, these findings indicate that mineral-coated PLG microspheres or mineral-coated microsphere aggregates can be synthesized in a controllable manner using a bioinspired process. These materials may be useful in a range of applications, including controlled drug delivery and biomolecule purification.

Self-association and micelle formation of biodegradable poly(ethylene glycol)-poly(L-lactic acid) amphiphilic di-block co-polymers.

Di-block co-polymers of poly(ethylene glycol)-poly(L-lactic acid) (PEG-PLLA) were prepared by ring-opening polymerization, and their self-association and micelle formation were investigated. The block co-polymers have the same block length of the hydrophilic PEG segment (Mn = 2000), but different chain lengths of the hydrophobic PLLA segment (Mn = 700, 1000 and 1300, respectively). The di-block co-polymers synthesized were characterized by GPC, 1H-NMR, TGA and DSC. The critical micelle concentration (CMC) of the PEG-PLLA micelles was determined at various temperatures (5-45 degrees C) using a dye absorption technique involving fluorescence spectrophotometry with pyrene as a probe to monitor the change in the polarity of the microenvironment in the micelle. An increase in the molecular weight of the hydrophobic block decreases the CMC. The partition coefficients of pyrene between the micellar and aqueous phases range from 0.68 x 10(4 )to 1.76 x 10(4), depending on the PLLA content in the block co-polymers. An Arrhenius plot of ln(CMC) versus 1/T exhibited an almost constant CMC at low temperatures (<35 degrees C), followed by an increase of the CMC at higher temperatures (>35 degrees C). The increase of the CMC with temperature indicates the increase of the mobility of the hydrophobic PLLA core. These results were confirmed by 1H-NMR measurements. The micelle size and size distribution were determined by dynamic light scattering (DLS), and were in the range of 78-92 nm. A spherical micelle shape was confirmed by transmission electron microscopy. These results indicate that the CMC and the thermal characteristics of the core-forming segment of the block co-polymer play an important role in the properties of the polymer micelles used for drug delivery.