Mesoporous Gold: Substrate-Dependent Growth Dynamics, Strain Accumulation, and Electrocatalytic Activity for Biosensing.

Understanding the growth of mesoporous crystalline materials, such as mesoporous metals, on different substrates can provide valuable insights into the crystal growth dynamics and the redox reactions that influence their electrochemical sensing performance. Herein, it is demonstrated how the amorphous nature of the glass substrate can suppress the typical <111> oriented growth in mesoporous Au (mAu) films. The suppressed <111> growth is manifested as an accumulation of strain, leading to the generation of abundant surface defects, which are beneficial for enhancing the electrochemical activity. The fine structuring attained enables dramatically accelerated diffusion and enhances the electrochemical sensing performance for disease-specific biomolecules. As a proof-of-concept, the as-fabricated glass-grown mAu film demonstrates high sensitivity in electrochemical detection of SARS-CoV-2-specific RNA with a limit of detection (LoD) as low as 1 attomolar (aM).

Borophene: Two-dimensional Boron Monolayer: Synthesis, Properties, and Potential Applications.

Borophene, a monolayer of boron, has risen as a new exciting two-dimensional (2D) material having extraordinary properties, including anisotropic metallic behavior and flexible (orientation-dependent) mechanical and optical properties. This review summarizes the current progress in the synthesis of borophene on various metal substrates, including Ag(110), Ag(100), Au(111), Ir(111), Al(111), and Cu(111), as well as heterostructuring of borophene. In addition, it discusses the mechanical, thermal, magnetic, electronic, optical, and superconducting properties of borophene and the effects of elemental doping, defects, and applied mechanical strains on these properties. Furthermore, the promising potential applications of borophene for gas sensing, energy storage and conversion, gas capture and storage applications, and possible tuning of the material performance in these applications through doping, formation of defects, and heterostructures are illustrated based on available theoretical studies. Finally, research and application challenges and the outlook of the whole borophene's field are given.

Flexible Nanoarchitectonics for Biosensing and Physiological Monitoring Applications.

Flexible and implantable electronics hold tremendous promises for advanced healthcare applications, especially for physiological neural recording and modulations. Key requirements in neural interfaces include miniature dimensions for spatial physiological mapping and low impedance for recognizing small biopotential signals. Herein, a bottom-up mesoporous formation technique and a top-down microlithography process are integrated to create flexible and low-impedance mesoporous gold (Au) electrodes for biosensing and bioimplant applications. The mesoporous architectures developed on a thin and soft polymeric substrate provide excellent mechanical flexibility and stable electrical characteristics capable of sustaining multiple bending cycles. The large surface areas formed within the mesoporous network allow for high current density transfer in standard electrolytes, highly suitable for biological sensing applications as demonstrated in glucose sensors with an excellent detection limit of 1.95 µm and high sensitivity of 6.1 mA cm-2  µM-1 , which is approximately six times higher than that of benchmarking flat/non-porous films. The low impedance of less than 1 kΩ at 1 kHz in the as-synthesized mesoporous electrodes, along with their mechanical flexibility and durability, offer peripheral nerve recording functionalities that are successfully demonstrated in vivo. These features highlight the new possibilities of our novel flexible nanoarchitectonics for neuronal recording and modulation applications.

Hydrogel Nanoarchitectonics: An Evolving Paradigm for Ultrasensitive Biosensing.

The integration of nanoarchitectonics and hydrogel into conventional biosensing platforms offers the opportunities to design physically and chemically controlled and optimized soft structures with superior biocompatibility, better immobilization of biomolecules, and specific and sensitive biosensor design. The physical and chemical properties of 3D hydrogel structures can be modified by integrating with nanostructures. Such modifications can enhance their responsiveness to mechanical, optical, thermal, magnetic, and electric stimuli, which in turn can enhance the practicality of biosensors in clinical settings. This review describes the synthesis and kinetics of gel networks and exploitation of nanostructure-integrated hydrogels in biosensing. With an emphasis on different integration strategies of hydrogel with nanostructures, this review highlights the importance of hydrogel nanostructures as one of the most favorable candidates for developing ultrasensitive biosensors. Moreover, hydrogel nanoarchitectonics are also portrayed as a promising candidate for fabricating next-generation robust biosensors.

Extracellular Vesicle Nanoarchitectonics for Novel Drug Delivery Applications.

Extracellular vesicles (EVs) can transfer intercellular messages in various (patho)physiological processes and transport biomolecules to recipient cells. EVs possess the capacity to evade the immune system and remain stable over long periods, identifying them as natural carriers for drugs and biologics. However, the challenges associated with EVs isolation, heterogeneity, coexistence with homologous biomolecules, and lack of site-specific delivery, have impeded their potential. In recent years, the amalgamation of EVs with rationally engineered nanostructures has been proposed for achieving effective drug loading and site-specific delivery. With the advancement of nanotechnology and nanoarchitectonics, different nanostructures with tunable size, shapes, and surface properties can be integrated with EVs for drug loading, target binding, efficient delivery, and therapeutics. Such integration may enable improved cellular targeting and the protection of encapsulated drugs for enhanced and specific delivery to target cells. This review summarizes the recent development of nanostructure amalgamated EVs for drug delivery, therapeutics, and real-time monitoring of disease progression. With a specific focus on the exosomal cargo, diverse drug delivery system, and biomimetic nanostructures based on EVs for selective drug delivery, this review also chronicles the needs and challenges of EV-based biomimetic nanostructures and provides a future outlook on the strategies posed.

Defect-Rich Hierarchical Porous UiO-66(Zr) for Tunable Phosphate Removal.

The introduction of defects into hierarchical porous metal-organic frameworks (HP-MOFs) is of vital significance to boost their adsorption performance. Herein, an advanced template-assisted strategy has been developed to fine-tune the phosphate adsorption performance of HP-MOFs by dictating the type and number of defects in HP-UiO-66(Zr). To achieve this, monocarboxylic acids of varying chain lengths have been employed as template molecules to fabricate an array of defect-rich HP-UiO-66(Zr) derivatives following removal of the template. The as-prepared HP-UiO-66(Zr) exhibits a higher sorption capacity and faster sorption rate compared to the pristine UiO-66(Zr). Particularly, the octanoic acid-modulated UiO-66(Zr) exhibits a high adsorption capacity of 186.6 mg P/g and an intraparticle diffusion rate of 6.19 mg/g·min0.5, which are 4.8 times and 1.9 times higher than those of pristine UiO-66(Zr), respectively. The results reveal that defect sites play a critical role in boosting the phosphate uptake performance, which is further confirmed by various advanced characterizations. Density functional theory (DFT) calculations reveal the important role of defects in not only providing additional sorption sites but also reducing the sorption energy between HP-UiO-66(Zr) and phosphate. In addition, the hierarchical pores in HP-UiO-66(Zr) can accelerate the phosphate diffusion toward the active sorption sites. This work presents a promising route to tailor the adsorption performance of MOF-based adsorbents via defect engineering.

Self-assembly of block copolymers towards mesoporous materials for energy storage and conversion systems.

Self-assembly of block copolymers (BCPs) provides a versatile strategy for controllable preparation of a broad range of functional materials with different ordered structures. In recent decades, this soft-templating strategy has been widely utilized for preparing a wide range of mesoporous materials. These porous materials have attracted tremendous interest in energy storage and conversion (ESC) applications in view of their ability to absorb, store, and interact with guest species on their exterior/interior surfaces and in the pore space. Compared with other synthetic approaches, such as template-free and hard-templating methods, BCP soft-templating protocols show great advantages in the construction of large mesopores with diameters between 10-60 nm, which are suitable for applications requiring the storage or hosting of large-sized species/molecules. In addition, this strategy shows incomparable merits in the flexible control of pore size/architecture/wall thickness, which determines the final performance of mesoporous materials in ESC devices. In the last decade, rapid development has been witnessed in the area of BCP-templated mesoporous materials. In this review paper, we overview the progress of this field over the past 10 years, with an emphasis on the discussions of synthetic methodologies, the control of materials structures (including morphology and pore size/shape), and potential applications particularly in rechargeable batteries, supercapacitors, electro-/photocatalysis, solar cells, etc.

Rational Design of Nanoporous MoS2 /VS2 Heteroarchitecture for Ultrahigh Performance Ammonia Sensors.

2D transition metal dichalcogenides (TMDs) have received widespread interest by virtue of their excellent electrical, optical, and electrochemical characteristics. Recent studies on TMDs have revealed their versatile utilization as electrocatalysts, supercapacitors, battery materials, and sensors, etc. In this study, MoS2 nanosheets are successfully assembled on the porous VS2 (P-VS2 ) scaffold to form a MoS2 /VS2 heterostructure. Their gas-sensing features, such as sensitivity and selectivity, are investigated by using a quartz crystal microbalance (QCM) technique. The QCM results and density functional theory (DFT) calculations reveal the impressive affinity of the MoS2 /VS2 heterostructure sensor toward ammonia with a higher adsorption uptake than the pristine MoS2 or P-VS2 sensor. Furthermore, the adsorption kinetics of the MoS2 /VS2 heterostructure sensor toward ammonia follow the pseudo-first-order kinetics model. The excellent sensing features of the MoS2 /VS2 heterostructure render it attractive for high-performance ammonia sensors in diverse applications.

Pseudocapacitive Lithium Storage of Cauliflower-Like CoFe2 O4 for Low-Temperature Battery Operation.

Binary transition-metal oxides (BTMOs) with hierarchical micro-nano-structures have attracted great interest as potential anode materials for lithium-ion batteries (LIBs). Herein, we report the fabrication of hierarchical cauliflower-like CoFe2 O4 (cl-CoFe2 O4 ) via a facile room-temperature co-precipitation method followed by post-synthetic annealing. The obtained cauliflower structure is constructed by the assembly of microrods, which themselves are composed of small nanoparticles. Such hierarchical micro-nano-structure can promote fast ion transport and stable electrode-electrolyte interfaces. As a result, the cl-CoFe2 O4 can deliver a high specific capacity (1019.9 mAh g-1 at 0.1 A g-1 ), excellent rate capability (626.0 mAh g-1 at 5 A g-1 ), and good cyclability (675.4 mAh g-1 at 4 A g-1 for over 400 cycles) as an anode material for LIBs. Even at low temperatures of 0 °C and -25 °C, the cl-CoFe2 O4 anode can deliver high capacities of 907.5 and 664.5 mAh g-1 at 100 mA g-1 , respectively, indicating its wide operating temperature. More importantly, the full-cell assembled with a commercial LiFePO4 cathode exhibits a high rate performance (214.2 mAh g-1 at 5000 mA g-1 ) and an impressive cycling performance (612.7 mAh g-1 over 140 cycles at 300 mA g-1 ) in the voltage range of 0.5-3.6 V. Kinetic analysis reveals that the electrochemical performance of cl-CoFe2 O4 is dominated by pseudocapacitive behavior, leading to fast Li+ insertion/extraction and good cycling life.

Practical MOF Nanoarchitectonics: New Strategies for Enhancing the Processability of MOFs for Practical Applications.

Over the past decades, the development of porous materials has directly or indirectly affected industrial production methods. Metal-organic frameworks (MOFs) as an emerging class of porous materials exhibit some unique advantages, including controllable composition, a large surface area, high porosity, and so on. These attractive characteristics of MOFs have led to their potential applications in energy storage and conversion devices, drug delivery, adsorption and storage, sensors, and other areas. However, powdered MOFs have limited practical applications owing to poor processability, safety hazards from dust formation, and poor recyclability. In addition, the inherent micro/mesoporosities of MOFs also reduce the accessibility and diffusion kinetics for large molecules. To improve their processability for practical applications, MOFs are often deposited as MOF layers or films (i.e., MOF-coated composites) on supporting materials or are formed into 3D structured composites, such as aerogels and hydrogels. In this article, we review recent researches on these MOF composites, including their synthetic methods and potential applications in energy storage devices, heavy metal ion adsorption, and water purification. Finally, the future outlook and challenges associated with the large-scale fabrication of MOF-based composites for practical applications are discussed.

Chemical Design of Palladium-Based Nanoarchitectures for Catalytic Applications.

Palladium (Pd) plays an important role in numerous catalytic reactions, such as methanol and ethanol oxidation, oxygen reduction, hydrogenation, coupling reactions, and carbon monoxide oxidation. Creating Pd-based nanoarchitectures with increased active surface sites, higher density of low-coordinated atoms, and maximized surface coverage for the reactants is important. To address the limitations of pure Pd, various Pd-based nanoarchitectures, including alloys, intermetallics, and supported Pd nanomaterials, have been fabricated by combining Pd with other elements with similar or higher catalytic activity for many catalytic reactions. Herein, recent advances in the preparation of Pd-based nanoarchitectures through solution-phase chemical reduction and electrochemical deposition methods are summarized. Finally, the trend and future outlook in the development of Pd nanocatalysts toward practical catalytic applications are discussed.

Biomolecule-Assisted Synthesis of Hierarchical Multilayered Boehmite and Alumina Nanosheets for Enhanced Molybdenum Adsorption.

The effective utilization of various biomolecules for creating a series of mesoporous boehmite (γ-AlOOH) and gamma-alumina (γ-Al2 O3 ) nanosheets with unique hierarchical multilayered structures is demonstrated. The nature and concentration of the biomolecules strongly influence the degree of the crystallinity, the morphology, and the textural properties of the resulting γ-AlOOH and γ-Al2 O3 nanosheets, allowing for easy tuning. The hierarchical γ-AlOOH and γ-Al2 O3 multilayered nanosheets synthesized by using biomolecules exhibit enhanced crystallinity, improved particle separation, and well-defined multilayered structures compared to those obtained without biomolecules. More impressively, these γ-AlOOH and γ-Al2 O3 nanosheets possess high surface areas up to 425 and 371 m2 g-1 , respectively, due to their mesoporous nature and hierarchical multilayered structure. When employed for molybdenum adsorption toward medical radioisotope production, the hierarchical γ-Al2 O3 multilayered nanosheets exhibit Mo adsorption capacities of 33.1-40.8 mg g-1 . The Mo adsorption performance of these materials is influenced by the synergistic combination of the crystallinity, the surface area, and the pore volume. It is expected that the proposed biomolecule-assisted strategy may be expanded for the creation of other 3D mesoporous oxides in the future.

Template-Free Fabrication of Mesoporous Alumina Nanospheres Using Post-Synthesis Water-Ethanol Treatment of Monodispersed Aluminium Glycerate Nanospheres for Molybdenum Adsorption.

This work reports the template-free fabrication of mesoporous Al2 O3 nanospheres with greatly enhanced textural characteristics through a newly developed post-synthesis "water-ethanol" treatment of aluminium glycerate nanospheres followed by high temperature calcination. The proposed "water-ethanol" treatment is highly advantageous as the resulting mesoporous Al2 O3 nanospheres exhibit 2-4 times higher surface area (up to 251 m2 g-1 ), narrower pore size distribution, and significantly lower crystallization temperature than those obtained without any post-synthesis treatment. To demonstrate the generality of the proposed strategy, a nearly identical post-synthesis "water treatment" method is successfully used to prepare mesoporous monometallic (e.g., manganese oxide (MnO2 )) and bimetallic oxide (e.g., CuCo2 O4 and MnCo2 O4 ) nanospheres assembled of nanosheets or nanoplates with highly enhanced textural characteristics from the corresponding monometallic and bimetallic glycerate nanospheres, respectively. When evaluated as molybdenum (Mo) adsorbents for potential use in molybdenum-99/technetium-99m (99 Mo/99m Tc) generators, the treated mesoporous Al2 O3 nanospheres display higher molybdenum adsorption performance than non-treated Al2 O3 nanospheres and commercial Al2 O3 , thereby suggesting the effectiveness of the proposed strategy for improving the functional performance of oxide materials. It is expected that the proposed method can be utilized to prepare other mesoporous metal oxides with enhanced textural characteristics and functional performance.

Tuning Wall Thicknesses in Mesoporous Silica Films for Optimization of Optical Anti-Reflective Properties.

This work reports the fabrication of mesoporous silica films with controllable wall thicknesses by spin coating of precursor solutions consisting of polystyrene-block-polybutadiene-block-polystyrene based triblock copolymers (Hydrogenated methyl Styrene Ethylene Butadiene methyl Styrene, HmSEBmS) and tetraethyl orthosilicate (TEOS) followed by calcination in air at 600 °C, for optical anti-reflection films. By changing the relative weight of the triblock polymer to TEOS, the pore-to-pore distance in the mesoporous silica film can be controlled without significantly affecting the size of the mesopores, thus, enabling effective control of the refractive index and porosity of the films. In terms of optical properties, the transmittance of the fabricated mesoporous silica film is approximately 3.3% higher than that of the uncoated glass substrate in the wavelength range of 400 to 750 nm.

Nanoarchitectures for Metal-Organic Framework-Derived Nanoporous Carbons toward Supercapacitor Applications.

The future advances of supercapacitors depend on the development of novel carbon materials with optimized porous structures, high surface area, high conductivity, and high electrochemical stability. Traditionally, nanoporous carbons (NPCs) have been prepared by a variety of methods, such as templated synthesis, carbonization of polymer precursors, physical and chemical activation, etc. Inorganic solid materials such as mesoporous silica and zeolites have been successfully utilized as templates to prepare NPCs. However, the hard-templating methods typically involve several synthetic steps, such as preparation of the original templates, formation of carbon frameworks, and removal of the original templates. Therefore, these methods are not favorable for large-scale production. Metal-organic frameworks (MOFs) with high surface areas and large pore volumes have been studied over the years, and recently, enormous efforts have been made to utilize MOFs for electrochemical applications. However, their low conductivity and poor stability still present major challenges toward their practical applications in supercapacitors. MOFs can be used as precursors for the preparation of NPCs with high porosity. Their parent MOFs can be prepared with endless combinations of organic and inorganic constituents by simple coordination chemistry, and it is possible to control their porous architectures, pore volumes, surface areas, etc. These unique properties of MOF-derived NPCs make them highly attractive for many technological applications. Compared with carbonaceous materials prepared using conventional precursors, MOF-derived carbons have significant advantages in terms of a simple synthesis with inherent diversity affording precise control over porous architectures, pore volumes, and surface areas. In this Account, we will summarize our recent research developments on the preparation of three-dimensional (3-D) MOF-derived carbons for supercapacitor applications. This Account will be divided into three main sections: (1) useful background on carbon materials for supercapacitor applications, (2) the importance of MOF-derived carbons, and (3) potential future developments of MOF-derived carbons for supercapacitors. This Account focuses mostly on carbons derived from two types of MOFs, namely, zeolite imidazolate framework-8 (ZIF-8) and ZIF-67. By using examples from our previous works, we will show the uniqueness of these carbons for achieving high performance by control of the chemical reactions/conditions as well proper utilization in asymmetric/symmetric supercapacitor configurations. This Account will promote further developments of MOF-derived multifunctional carbon materials with controlled porous architectures for optimization of their electrochemical performance toward supercapacitor applications.

Tailored Design of Bicontinuous Gyroid Mesoporous Carbon and Nitrogen-Doped Carbon from Poly(ethylene oxide-b-caprolactone) Diblock Copolymers.

Highly ordered mesoporous resol-type phenolic resin and the corresponding mesoporous carbon materials were synthesized by using poly(ethylene oxide-b-caprolactone) (PEO-b-PCL) diblock copolymer as a soft template. The self-assembled mesoporous phenolic resin was found to form only in a specific resol concentration range of 40-70 wt % due to an intriguing balance of hydrogen-bonding interactions in the resol/PEO-b-PCL mixtures. Furthermore, morphological transitions of the mesostructures from disordered to gyroid to cylindrical and finally to disordered micelle structure were observed with increasing resol concentration. By calcination under nitrogen atmosphere at 800 °C, the bicontinuous mesostructured gyroid phenolic resin could be converted to mesoporous carbon with large pore size without collapse of the original mesostructure. Furthermore, post-treatment of the mesoporous gyroid phenolic resin with melamine gave rise to N-doped mesoporous carbon with unique electronic properties for realizing high CO2 adsorption capacity (6.72 mmol g-1 at 0 °C).

Spontaneous Weaving of Graphitic Carbon Networks Synthesized by Pyrolysis of ZIF-67 Crystals.

Three-dimensional (3D) networks of graphitic carbon are promising materials for energy storage and conversion devices because of their high electrical conductivity, which is promoted by the good interconnection between the carbon particles. However, it is still difficult to directly synthesize such carbon networks. Herein, we report the novel synthesis of 3D graphitic carbon networks through the pyrolysis of nanosized ZIF-67 crystals. Interestingly, the unusual effect of downsizing the ZIF-67 crystals and the incorporation of catalytic Co nanoparticles was the spontaneous formation of graphitic networks. The obtained graphitic carbon networks show excellent electrochemical performance for the insertion and extraction of potassium ions.

Carbon nanotube-decorated hierarchical porous nickel/carbon hybrid derived from nickel-based metal-organic framework for enhanced methyl blue adsorption.

This work reports the incorporation of coordinated water into Ni-BTC nanorods (Ni-BTC-O) which induces their structural transformation to Ni-BTC nanofibres (Ni-BTC-F). The carbonization of the Ni-BTC nanofibres at 600 °C results in the formation of carbon nanotube (CNT)-decorated hierarchical porous nickel/carbon hybrid (labelled as Ni/C-600) with enlarged pores. In contrast, the Ni/C hybrid obtained from the carbonization of the original (unmodified) Ni-BTC nanorods (Ni-BTC-O) at 600 °C (labelled as Ni-BTC-O-600) exhibits smaller pore size and does not show the formation of CNTs. The Ni/C-600 hybrid derived from Ni-BTC-F shows a very high adsorption capacity of 686.8 mg g-1 toward methyl blue (MB) dye. This is approximately 4.8 times higher than the adsorption capacity of Ni-BTC-O-600 (144.1 mg g-1). The higher adsorption performance of Ni/C-600 relative to Ni-BTC-O-600 can be attributed to its larger pore volume, hierarchical porosity, and additional adsorption sites provided by the CNTs. In addition, the Ni/C-600 hybrid can maintain 90% of its adsorption capacity after 5 consecutive cycles, demonstrating its potential as an efficient and recyclable adsorbent for MB dye.

The revelation of glucose adsorption mechanisms on hierarchical metal-organic frameworks using a surface plasmon resonance sensor.

The gold layer on the surface plasmon resonance (SPR) sensor chip cannot detect small molecules, such as glucose without the use of specific receptors. Metal-organic frameworks (MOFs) are useful in biosensing technologies for capturing and co-localizing enzymes and receptors with the target biomolecule. In many previous studies, the properties of the MOFs were often ignored, with these studies focusing on the selection of appropriate receptors. To take advantage of the unique properties of MOFs in biosensors, one must also consider the technique and transducer used because these aspects will strongly influence the detection mechanism. In this work, we have investigated for the first time, the applications of hierarchical metal-BDC (M-BDC) MOFs for glucose detection using the SPR technique without the use of specific receptors. The underlying interactions and adsorption mechanisms were analyzed using adsorption isotherm and kinetic models. The sensing measurements show that the SPR chips functionalized with M-BDC MOFs exhibit higher sensitivity and lower limit of detection (LOD). Specifically, the sensitivity follows the order of Zr-BDC > Cu-BDC > Mn-BDC > Ni-BDC > bare Au SPR chips with the LOD in the order of Zr-BDC < Mn-BDC < Ni-BDC < Cu-BDC < bare Au SPR chips. The selectivity test results reveal that Zr-BDC exhibits a decent selectivity to glucose in the presence of other interfering compounds, such as ascorbic acid, uric acid, maltose, and urea. These results demonstrate the promising potential of MOFs for SPR biosensing.

Ultrathin nanosheet-assembled nickel-based metal-organic framework microflowers for supercapacitor applications.

Herein, we propose a solvent-assisted approach for preparing Ni-MOF microflowers with high specific capacitance and excellent rate capability as an electrode material for supercapacitors. The high electrochemical performance of this Ni-MOF is attributed to the fast ion transport and low electrical resistance resulting from its hierarchical flower-like structure, and the capacitance contribution from nickel hydroxide species.