Sustainable approach for the expulsion of metaldehyde: risk, interactions, and mitigation: a review.

All pests can be eliminated with the help of pesticides, which can be either natural or synthetic. Because of the excessive use of pesticides, it is harmful to both ecology and people's health. Pesticides are categorised according to several criteria: their chemical composition, method of action, effects, timing of use, source of manufacture, and formulations. Many aquatic animals, birds, and critters live in danger owing to hazardous pesticides. Metaldehyde is available in various forms and causes significant impact even when small amounts are ingested. Metaldehyde can harm wildlife, including dogs, cats, and birds. This review discusses pesticides, their types and potential environmental issues, and metaldehyde's long-term effects. In addition, it examines ways to eliminate metaldehyde from the aquatic ecosystem before concluding by anticipating how pesticides may affect society. The metal-organic framework and other biosorbents have been appropriately synthesized and subsequently represent the amazing removal of pesticides from effluent as an enhanced adsorbent, such as magnetic nano adsorbents. A revision of the risk assessment for metaldehyde residuals in aqueous sources is also attempted.

Effectiveness of spontaneous ovulation as monitored by urinary luteinising hormone versus induced ovulation by administration of human chorionic gonadotrophin in couples undergoing gonadotrophin-stimulated intrauterine insemination: a randomised controlled trial.

OBJECTIVE: To compare effectiveness of spontaneous ovulation monitored by urinary luteinising hormone (LH) versus induced ovulation by administration of human chorionic gonadotrophin (hCG) in couples undergoing gonadotrophin-stimulated intrauterine insemination (IUI). DESIGN: Randomised controlled trial. SETTING: University-level infertility unit. POPULATION: Couples with unexplained infertility, mild endometriosis, mild male factor infertility and polycystic ovarian syndrome. METHODS: Couples were randomised to an LH group (Group A), in which urinary LH was measured daily to detect spontaneous ovulation, or an hCG group (Group B), in which urinary hCG was administered as a trigger. MAIN OUTCOME MEASURES: Clinical pregnancy rate. Secondary outcomes - ongoing pregnancy, live birth, multiple pregnancy and miscarriage rates. RESULTS: A total of 392 couples were randomised with 196 in each arm. The clinical pregnancy rate per woman randomised was 14/196 (7.1%) in the LH arm versus 15/196 (7.6%) in the hCG arm (P = 0.847, which was not statistically significant). Similarly, the ongoing pregnancy rates [13/196 (6.6%) versus 14/196 (7.1%); P = 0.84] and the live birth rates [13/196 (6.6%) versus 14/196 (7.1%); P = 0.84] between the two groups did not show any significant difference. The duration of stimulation and gonadotrophin dosage also did not differ significantly between the two methods. CONCLUSION: There was no significant difference in clinical pregnancy rates when urinary LH and hCG trigger were compared as methods to time insemination in women undergoing gonadotropin-stimulated IUI. TWEETABLE ABSTRACT: A randomised controlled study showing similar effectiveness between two different methods of timing IUI.

Chelating modified cellulose bearing pendant heterocyclic moiety for effective removal of heavy metals.

Cellulose bearing pendant Schiff base with heterocyclic chelating groups (CMC-Bz) was synthesized, which were fully characterized using various instrumental techniques such as solid state carbon-13 nuclear magnetic resonance (13C-NMR), Fourier transform infrared (FTIR), scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDX) spectra. The adsorption of toxic metals onto cellulosic material was tested in a batch mode operation. The adsorption functional factors such as pH, adsorbent dose, metal ion concentration, equilibrium time and temperature were experimentally optimized for the maximum removal of Cu(II) and Pb(II) ions. Adsorption isotherms were evaluated with Langmuir, Freundlich, Temkin and Redlich-Peterson isotherms. Kinetic parameters and equilibrium adsorption capacities were investigated for pseudo-first-order, pseudo-second-order and intra-particle diffusion models. Thermodynamic parameters and reusability were also evaluated.

Dynamic Harmony Search with Polynomial Mutation Algorithm for Valve-Point Economic Load Dispatch.

Economic load dispatch (ELD) problem is an important issue in the operation and control of modern control system. The ELD problem is complex and nonlinear with equality and inequality constraints which makes it hard to be efficiently solved. This paper presents a new modification of harmony search (HS) algorithm named as dynamic harmony search with polynomial mutation (DHSPM) algorithm to solve ORPD problem. In DHSPM algorithm the key parameters of HS algorithm like harmony memory considering rate (HMCR) and pitch adjusting rate (PAR) are changed dynamically and there is no need to predefine these parameters. Additionally polynomial mutation is inserted in the updating step of HS algorithm to favor exploration and exploitation of the search space. The DHSPM algorithm is tested with three power system cases consisting of 3, 13, and 40 thermal units. The computational results show that the DHSPM algorithm is more effective in finding better solutions than other computational intelligence based methods.

Wandering intrauterine contraceptive device: An unusual travel to the sigmoid colon.

Intrauterine contraceptive device (IUCD) is common choice for contraception. Migration of IUCD is one of the complications that are encountered. Here we report a case of IUCD migration to the sigmoid colon. A 39-year-old Malay lady carrying a copper T type of IUCD presented with missing thread then underwent examination under anaesthesia, proceeded to hysteroscopy but failed removal. Abdominal ultrasound detected it in the left lower quadrant of abdomen. She then underwent diagnostic laparoscopy where the device was found to be embedded in the sigmoid colon. Technical difficulty necessitated conversion to mini laparotomy and sigmoidotomy to remove the IUCD and the bowel closed primarily. IUCD is a relatively simple and safe contraceptive procedure but possible complications are bleeding and pain that usually co-exist, pelvic infection, expulsion and perforation. Investigations should be based on clinical suspicion and migrated IUCD in symptomatic patients should be surgically removed whereas, asymptomatic patients can be managed conservatively under certain circumstances. However in the presence of a concurrent pathology that requires exploration then retrieval of the migrated IUCD should be undertaken.

Firefly algorithm based WSN-IoT security enhancement with machine learning for intrusion detection.

A Wireless Sensor Network (WSN) aided by the Internet of Things (IoT) is a collaborative system of WSN systems and IoT networks are work to exchange, gather, and handle data. The primary objective of this collaboration is to enhance data analysis and automation to facilitate improved decision-making. Securing IoT with the assistance of WSN necessitates the implementation of protective measures to confirm the safety and reliability of the interconnected WSN and IoT components. This research significantly advances the current state of the art in IoT and WSN security by synergistically harnessing the potential of machine learning and the Firefly Algorithm. The contributions of this work are twofold: firstly, the proposed FA-ML technique exhibits an exceptional capability to enhance intrusion detection accuracy within the WSN-IoT landscape. Secondly, the amalgamation of the Firefly Algorithm and machine learning introduces a novel dimension to the domain of security-oriented optimization techniques. The implications of this research resonate across various sectors, ranging from critical infrastructure protection to industrial automation and beyond, where safeguarding the integrity of interconnected systems are of paramount importance. The amalgamation of cutting-edge machine learning and bio-inspired algorithms marks a pivotal step forward in crafting robust and intelligent security measures for the evolving landscape of IoT-driven technologies. For intrusion detection in the WSN-IoT, the FA-ML method employs a support vector machine (SVM) machine model for classification with parameter tuning accomplished using a Grey Wolf Optimizer (GWO) algorithm. The experimental evaluation is simulated using NSL-KDD Dataset, revealing the remarkable enhancement of the FA-ML technique, achieving a maximum accuracy of 99.34%. In comparison, the KNN-PSO and XGBoost models achieved lower accuracies of 96.42% and 95.36%, respectively. The findings validate the potential of the FA-ML technique as an active security solution for WSN-IoT systems, harnessing the power of machine learning and the Firefly Algorithm to bolster intrusion detection capabilities.

An explainable AI-assisted web application in cancer drug value prediction.

In recent years, there has been an increase in the interest in adopting Explainable Artificial Intelligence (XAI) for healthcare. The proposed system includes•An XAI model for cancer drug value prediction. The model provides data that is easy to understand and explain, which is critical for medical decision-making. It also produces accurate projections.•A model outperformed existing models due to extensive training and evaluation on a large cancer medication chemical compounds dataset.•Insights into the causation and correlation between the dependent and independent actors in the chemical composition of the cancer cell. While the model is evaluated on Lung Cancer data, the architecture offered in the proposed solution is cancer agnostic. It may be scaled out to other cancer cell data if the properties are similar. The work presents a viable route for customizing treatments and improving patient outcomes in oncology by combining XAI with a large dataset. This research attempts to create a framework where a user can upload a test case and receive forecasts with explanations, all in a portable PDF report.

Metal organic framework anchored onto biowaste mediated carbon material (rGO) for remediation of chromium (VI) by the photocatalytic process.

Groundwater contaminated with hexavalent chromium Cr(VI) causes serious health concerns for the ecosystem. In this study, a hybrid amino functionalized MOF@rGO nanocatalyst was produced by utilization of a biowaste mediated carbon material (reduced graphene oxide; rGO) and its surface was modified by in situ synthesis of a nanocrystalline, mixed ligand octahedral MOF containing iron metal and NH2 functional groups and the prepared composite was investigated for Cr (VI) removal. The photocatalytic degradation of Cr(VI) in aqueous solutions was carried out under UV irradiation. Using a batch mode system, the effect of numerous control variables was examined, and the process design and optimization were carried out by response surface methodology (RSM). The photocatalyst, NH2-MIL(53)-Fe@rGO, was intended to be a stable and highly effective nanocatalyst throughout the recycling tests. XRD, SEM, EDS, FTIR examinations were exploited to discover more about surface carbon embedded with MOF. 2 g/L of NH2-MIL-53(Fe)/rGO was utilized in degrading 200 mg/L of Cr(VI) in just 100 min, implying the selective efficacy of such a MOF-rGO nanocatalyst. Moreover, the Eg determinations well agreed with the predicted range of 2.7 eV, confirming its possibility to be exploited underneath visible light, via the Tauc plot. Thus, MOF anchored onto biowaste derived rGO photo-catalyst was successfully implemented in chromium degradation.

Facile synthesis of iron nanoparticles from Camellia Sinensis leaves catalysed for biodiesel synthesis from Azolla filiculoides.

Recent years have seen an increase in research on biodiesel, an environmentally benign and renewable fuel alternative for traditional fossil fuels. Biodiesel might become more cost-effective and competitive with diesel if a solid heterogeneous catalyst is used in its production. One way to make biodiesel more affordable and competitive with diesel is to employ a solid heterogeneous catalyst in its manufacturing. Based on X-ray diffraction (XRD) and Fourier Transform infrared spectroscopy (FTIR), the researchers in this study proved their hypothesis that iron oxide core-shell nanoparticles were generated during the green synthesis of iron-based nanoparticles (FeNPs) from Camellia Sinensis leaves. The fabrication of spherical iron nanoparticles was successfully confirmed using scanning electron microscopy (SEM). As a heterogeneous catalyst, the synthesised catalyst has shown potential in facilitating the conversion of algae oil into biodiesel. With the optimal parameters (0.5 weight percent catalytic load, 1:6 oil-methanol ratio, 60 °C reaction temperature, and 1 h and 30 min reaction duration), a 93.33% yield was attained. This may be due to its acid-base property, chemical stability, stronger metal support interaction. Furthermore, the catalyst was employed for transesterification reactions five times after regeneration with n-hexane washing followed by calcination at 650 °C for 3 h.

Influence of post fit and post length on fracture resistance: an in vitro study.

BACKGROUND AND OBJECTIVES: As root filled teeth often have insufficient coronal tooth structure, placement of a post is occasionally necessary to provide adequate retention for the core and final restoration. The aim of the present study was to investigate (i) the impact of post fit (form-congruence) and (ii) the influence of post length on the fracture resistance of severely damaged root filled extracted teeth. MATERIALS AND METHODS: Forty single-rooted human teeth were root filled and divided into four groups (n = 10 per group). Post spaces were prepared with a depth of 6 mm (groups 1, 3) and 3 mm (groups 2, 4). Form-congruence with a maximal fit of the post within the root canal space was obtained in groups 1 and 2, whereas there was no form-congruence in groups 3 and 4. In all groups, glass fiber reinforced composite (FRC) posts were adhesively cemented and direct composite crown buildups were fabricated without a ferrule. Specimens were subjected to thermocycling and cyclic loading followed by application of static load until failure. Loads-to-failure [in N] were compared among the groups. RESULTS: Post fit did not have a significant influence on fracture resistance, irrespective of the post length. Both groups with post insertion depths of 6 mm resulted in significantly higher mean failure loads (group 1: 274.27 N; group 3: 277.16 N) than the groups with post space preparation of 3 mm (group 2: 250.40 N; group 4: 255.48 N). INTERPRETATION AND CONCLUSION: Within the limitations of this study, the fracture resistance of teeth restored with FRC posts and direct resin composite crowns without ferrules was not influenced by post fit within the root canal. These results imply that excessive post space preparation aimed at producing an optimal circumferential post fit is not required to improve fracture resistance of roots.

Influence of heat input on the mechanical characteristics, corrosion and microstructure of ASTM A36 steel welded by GTAW technique.

The Gas Tungsten Arc Welding process weld for the 4 mm thickness of the ASTM A36 steel plate with varied heat input parameters of 0.608 kJ/mm, 0.900 kJ/mm and 1.466 kJ/mm, respectively. The effect of different heat inputs on microstructure, corrosion, and mechanical characteristics of developed weld joints are examined by three zones: heat-affected zone, welded zone, and base metal zone. The optical microscopic results of weld joints illustrate that fine grain structure leads to enhance welding strength. It is revealed that the increased heat input parameter on the weld joint shows a decreased tensile strength and hardness of the weld joint. The corrosion resistance of the weld joint is evaluated by Potentio-dynamic polarization. It facilitates that the corrosion rate of the weld joint is decreased with increasing heat input, which results indicate the best and worst corrosion micrograph of the polygonal ferrite and ferrite plus polygonal ferrite. However, the weld joint prepared with 0.900 kJ/mm heat input found maximum corrosion resistance.

Studies on the defluoridation of water using conducting polymer/montmorillonite composites.

Conducting polymer/inorganic hybrid composites have large surface areas, which makes the adsorbent properties of the polymer composites as good the constituents. Polyaniline/montmorilonite (PANi-MMT) and polypyrrole/montmorillonite (PPy-MMT) composites were prepared, characterized (Fourier transform infrared, scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction patterns) and were employed as adsorbents for the removal of fluoride ions from aqueous solution by the batch sorption method. The spectral studies of the adsorbents before and after the adsorption are recorded to get better insight into the mechanism of the adsorption process. The results indicated that the removal of fluoride ions from water by these composites occurs via the combined effect of both the constituents, that is, through a physico-chemical mechanism. The amount of fluoride ion adsorbed by PANi-MMT and PPy-MMT at 30 degrees C is observed to be 2.3 and 5.1 mg g(-1), respectively, when compared to 0.77 and 2.66 mg g(-1), respectively, for the polymers alone. The Langmuir, Freundlich and Dubinin-Radushkevich isotherms were used to describe the adsorption equilibrium.

Docking Studies of Adenosine Analogues with NS5 Methyltransferase of Yellow Fever Virus.

Yellow fever virus (YFV) is caused by single stranded positive RNA virus called Flavivirus. Till now no specific antiviral agents are available for the treatment of YFV, and despite a commercial YFV vaccine, there are still approximately 30,000 deaths worldwide each year and cases have been increasing in the last 20 years. Here, the effects of adenosine analogues and commercially available adenosine derivative drugs on NS5 methyltransferase of YFV have been performed by the comparative docking study. Based on the docking score, the glide energy and the number of interactions of the adenosine analogues with the Pubchem ID 13792 and 1077 showed the better scoring function than the best ranked commercially available adenosine analogue derived antiviral drug Cc3ado. From the docking result it reveals that these adenosine analogues can bind to the active site of NS5 methyltransferase protein and inhibit the viral replication.

Optimization of MM9 Medium Constituents for Enhancement of Siderophoregenesis in Marine Pseudomonas putida Using Response Surface Methodology.

Pseudomonas putida (CMMB2) was isolated from open ocean water of Gulf of Mannar. The isolate was identified based on 16S rRNA gene sequencing and phylogenetic analysis. Chrome azurol sulphonate assay confirms siderophore production by the isolate. Nature of siderophore produced by the isolate was found to be of mixed type. Siderophore production was found to be inversely proportional to iron concentration of the medium. Maximum siderophore production was observed with MM9 medium. Siderophore production was found to be influenced by different carbon, nitrogen and amino acid sources. Optimization of MM9 medium nutrient composition by response surface methodology (RSM) enhances siderophore production. Application of RSM is one of the strategic attempts in cost effective siderophore production process. Presence of aromatic ring in the siderophore with (C-O) and (C=C) stretching was ascertained by FTIR spectral analysis. Mass spectral analysis revealed the presence of chromophore in the pyoverdine siderophore. Cell free supernatant and purified siderophore was found to inhibit the growth of bacterial and fungal pathogens.

Error Concealment in the Density Field of a Spatiotemporal Image Sequence.

One of the most difficult challenges of multimedia transmission during the last two decades has been the retrieval of degraded or missing regions of images and videos while maintaining satisfactory perceptual accuracy. The objective is to retrieve lost data by using the similarity between frames. Usually, error concealment (EC) schemes depend on replacing incorrect data with data that are identical to the initial. This is possible because video contains a high degree of self-similarity. This research focuses on applying an EC approach in transform-domain video sequences. To conduct EC on films, they must first be translated to frames and then transformed using one of the available transformations into frequency-domain images. Using successive frames, it is possible to recover lost or incorrect data from images. Intra-coded frames (I-frames) may be used to recreate lost knowledge in predictive (P-frames) and bidirectional predictive frames (B-frames). I-frame knowledge that has been lost may be restored using previous intra-coded frames. The use of wavelet error concealment generated more precise results than the other techniques. In this study, it was discovered that covering faults in the density sector with wavelets produces more reliable results than the other techniques.

Chemical and structural characterization of hydroxamate siderophore produced by marine Vibrio harveyi.

In the present study, 22 different bacteria were isolated from open ocean water from the Gulf of Mannar, India. Of the 22 isolates, 4 were identified as Vibrio spp. (VM1, VM2, VM3 and VM4) and found to produce siderophores (iron-binding chelators) under iron-limited conditions. Different media were found to have an influence on siderophore production. Maximum siderophore production was observed with VM1 isolate in MM9 salts medium at 48 h of incubation. The isolate was confirmed as Vibrio harveyi based on 16S rRNA gene sequencing and phylogenetic analysis. Fourier-transform infrared (FTIR) and (1)H nuclear magnetic resonance (NMR) spectra revealed the hydroxamate nature of the siderophore produced. Further characterization of the siderophore revealed it to be of dihydroxamate nature, forming hexadentate ligands with Fe(III) ions. A narrow shift in ultraviolet (UV)-Vis spectrum was observed on photolysis due to ligand oxidation. Growth-promotion bioassay with Aeromonas hydrophila, Staphylococcus aureus and E. coli confirmed the iron-scavenging property of the siderophore produced by Vibrio harveyi.

Diaqua-dichloridobis(pyridine-κN)manganese(II).

The molecular title compound, [MnCl(2)(C(5)H(5)N)(2)(H(2)O)(2)], lies about an inversion centre. The Mn(II) atom is in an all-trans octa-hedral environment defined by two water mol-ecules, two chloride anions and two pyridine ligands. An inter-molecular hydrogen-bonding inter-action between a water mol-ecule and a chloride anion bonded to an adjacent Mn(II) atom generates an eight-membered ring. The crystal packing exhibits two inter-molecular π-π stacking inter-actions between the aromatic rings, with centroid-centroid distances of 3.485 (12) and 3.532 (12) Å.

Systematic measurements of charge transfer complexes caused from 1-phenyl-1,2,3,4-tetrahydroisoquinoline and 4-aminoacetanilide with series of π-acceptors (BQ, DDQ, TCNQ).

Molecular charge-transfer interaction of a series of electron π-acceptors of 1,4-benzoquinone (BQ), 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and Tetracyanoquinodimethane (TCNQ) with selected donors of 1-phenyl-1,2,3,4-tetrahydroisoquinoline (PTHIQ) and 4-aminoacetanilide (ACE) have been studied in methanol at room temperature. The stoichiometry of the complexes was determined by photometric titration method and was found to be 1:1, in all the cases. Spectro-kinetic interaction studies along with rate constants and observed formation constants (K) indicated that the strength of the complex formations is PTHIQ-BQ < PTHIQ-DDQ < PTHIQ-TCNQ. Also, Similar observations happened in ACE-BQ and < ACE-DDQ < ACE-TCNQ systems. FT-IR results indicated that the point of interaction was identifying in NH moiety of PTHIQ and NH2 moiety of ACE with series of π-acceptor complexes. The experimental results were compared with Ab initio DFT calculations at the B3LYP/6-31 + G(d) level of theory. The increasing order of the experimentally measured formation constant of CT-complexes (PTHIQ and ACE with series of acceptors) was well supported by theoretical HOMO-LUMO energy gap and drastically changes in Mulliken charges of NH moiety of PTHIQ, NH2 moiety of ACE with complexation with acceptors.

Tunable graphene nanopatch antenna design for on-chip integrated terahertz detector arrays with potential application in cancer imaging.

Aim: Further to our reports on chip-integrable uncooled terahertz microbolometer arrays, compatible with medium-scale semiconductor device fabrication processes, the possibility of the development of chip-integrable medical device is proposed here. Methods: The concept of graphene-based nanopatch antennas with design optimization by the finite element method (FEM) is explored. The high-frequency structure simulator (HFSS) utilized fine FEM solver for analyzing empirical mode decomposition preprocessing and for modeling and simulating graphene antennas. Results: Graphene nanopatch antennas exhibited tunable features with varying patch dimensions and dependence on substrate material permittivity. Conclusion: This work implements reconfigurable graphene nanopatch antenna compatible with terahertz microbolometer arrays. This design concept further develops on-chip medical devices for possible screening of cancer cell with terahertz image processing.

Optimized Tree Strategy with Principal Component Analysis Using Feature Selection-Based Classification for Newborn Infant's Jaundice Symptoms.

One of the most important and difficult research fields is newborn jaundice grading. The mitotic count is an important component in determining the severity of newborn jaundice. The use of principal component analysis (PCA) feature selection and an optimal tree strategy classifier to produce automatic mitotic detection in histopathology images and grading is given. This study makes use of real-time and benchmark datasets, as well as specific approaches for detecting jaundice in newborn newborns. According to research, the quality of the feature may have a negative impact on categorization performance. Additionally, compressing the classification method for exclusive main properties can result in a classification performance bottleneck. As a result, identifying appropriate characteristics for training the classifier is required. By combining a feature selection method with a classification model, this is possible. The major outcomes of this study revealed that image processing techniques are critical for predicting neonatal hyperbilirubinemia. Image processing is a method of translating analogue images to digital formats and manipulating them. The primary goal of medical image processing is to collect information useful for disease detection, diagnosis, monitoring, and therapy. Image datasets can be used to validate the performance of newborn jaundice detection. When compared to conventional approaches, it offers results that are accurate, quick, and time efficient. Accuracy, sensitivity, and specificity, which are common performance indicators, were also predictive.