Optimization of the nanostructured weakly coupled few-mode fiber for mode-division-multiplexed systems.

The objective of the study is to optimize the optical fiber structure for mode-division multiplexing systems using nanostructurization. The nanostructuring technique allows to fabricate fibers with arbitrarily designed (free-form) refractive index distribution based on two glasses. Three optimization schemes have been proposed. The nanostructuring method allows for designing fibers with optical properties similar and even better parameters impossible to produce by other methods. In this proposal, we examined four linearly polarized (LP) few-mode fibers. We report a high effective refractive index difference between modes while maintaining other important parameters for the weakly coupled approach.

Transmission of an optical vortex beam in antiresonant fibers generated in an all-fiber system.

We report an experimental study on transmission of orbital angular momentum mode in antiresonant fibers generated with a dedicated all-fiber optical vortex phase mask. The vortex generator can convert Gaussian beam into vortex beams with topological charge l = 1. Generated vortex beam is directly butt-coupled into the antiresonant fiber and propagates over distance of 150 cm. The stability and sensitivity of the transmitted vortex beam on the external perturbations including bending, axial stress, and twisting is investigated. We demonstrate distortion-free vortex propagation for the axial stress force below 0.677 N, a bend radius greater than 10 cm.

Development of gradient index microlenses for the broadband infrared range.

The development of gradient index free-form micro-optic components dedicated to the mid-infrared range is challenging due to the lack of appropriate technology. We propose a method for developing gradient index components for broadband infrared range beyond the transmission window of silicate glass based on nanostructurization using a stack-and-draw fiber drawing technique. A proof-of-concept microlens is developed and verified experimentally in the wavelength range 1.5-4.3 µm. The microlenses are composed of a set of nanorods with a diameter of 940 nm made of a pair of SiO2-PbO-Bi2O3-Ga2O3 based glasses ordered into the preliminary calculated binary pattern. The pattern forms effectively continuous parabolic refractive index distribution for infrared range according to Maxwell-Garnett effective medium model. The development of individual microlenses with a diameter of 118 µm and focal length of 278 µm at the wavelength of 3.75 µm are reported. A large array of 737 microlenses with an individual diameter of 125 µm and focal length of 375 µm is also presented and analyzed.

All-solid polarization-maintaining silica fiber with birefringence induced by anisotropic metaglass.

We report the development of a silica glass single-mode polarization-maintaining fiber with birefringence induced by artificial anisotropic glass in the circular core without any external stress zones or structured cladding. The fiber core is composed of silica and germanium-doped silica nanorods ordered in submicrometer interleaved layers. The fiber has a measured cut-off wavelength at 1113 nm, phase birefringence of 0.3×10-4, and an effective mode diameter of 10.5 µm at the wavelength of 1550 nm. The polarization extinction ratio in the fiber is 20 dB at 1550 nm. The fiber is compatible with the standard SMF-28 fiber and can be easily integrated using standard fusion splicing with losses of 0.1 dB.

Toward highly birefringent silica Large Mode Area optical fibers with anisotropic core.

We test the development of a silica all-glass optical fiber with a highly birefringent large mode area (HB-LMA). In the fiber, the birefringence and single mode operation are independent of bending and results from the internal nanostructuring of the core, which makes the glass anisotropic. Taking into account technological limitations of the doped silica glasses, we optimized the HB-LMA fiber properties by appropriate selection of germanium and fluorine doping level of silica used in the fiber core and cladding. We demonstrated that the anisotropic glass can be successfully used as a core material in large core area fibres in C-band for polarization components of the fundamental mode. We obtained phase birefringence of 1.92 × 10-4 in the fiber with the core diameter of 30 µm and the effective mode area equal to 573 µm2 and 804 µm2, for x- and y-polarization, respectively. The same approach was applied to designing a single mode fiber with 40 µm core diameter and effective mode area over 1000 µm2, which supports only single polarization.

Nanostructured active and photosensitive silica glass for fiber lasers with built-in Bragg gratings.

A nanostructured core silica fiber with active and photosensitive areas implemented within the fiber core is demonstrated. The photosensitivity, active and passive properties of the fiber can be independently shaped with this new approach. We show that discrete local doping with active ions in form of nanorods allow to obtain effective laser action as in case of continuous distribution of the ions in the core. Co-existing discrete photosensitive nanostructure of germanium doped silica determine single-mode performance and allow inscription of highly efficient Bragg grating over the entire core area. Each nanostructure do not degrade performance of other one since physical interaction between active and photosensitive areas are removed. As a proof of concept, we have designed and fabricated the nanostructured, ytterbium single-mode silica fiber laser with the Bragg grating inscribed in the entire core area. We demonstrated fiber laser with good quality of generated laser beam (M2=1.1) with lasing efficiency of 44% and inscribed Bragg grating with 98.5% efficiency and -18 dB contrast.

Enhancement of UV-visible transmission characteristics in wet-etched hollow core anti-resonant fibers.

We report on the feasibility of short-wavelength transmission window modification in anti-resonant hollow core fibers using post-processing by hydrofluoric (HF) acid etching. Direct drawing of stacked anti-resonant hollow core fibers with sub-micron thin cladding capillary membranes is technologically challenging, but so far this has been the only proven method of assuring over an octave-spanning transmission windows across the visible and UV wavelengths. In this study we revealed that low HF concentration allows us to reduce the thickness of the cladding capillary membranes from the initial 760 nm down to 180 nm in a controlled process. The glass etching rates have been established for different HF concentrations within a range non-destructive to the anti-resonant cladding structure. Etching resulted in spectral blue-shifting and broadening of anti-resonant transmission windows in all tested fiber samples with lengths between 15 cm and 75 cm. Spectrally continuous transmission, extending from around 200 nm to 650 nm was recorded in 75 cm long fibers with cladding membranes etched down to thickness of 180 nm. The experiment allowed us to verify the applicability and feasibility of controlling a silica fiber post-processing technique, aimed at broadening of anti-resonant transmission windows in hollow core fibers. A practical application of the processed fiber samples is demonstrated with their simple butt-coupling to light-emitting diodes centered at various ultraviolet wavelengths between 265 nm and 365 nm.

Low pump power coherent supercontinuum generation in heavy metal oxide solid-core photonic crystal fibers infiltrated with carbon tetrachloride covering 930-2500†nm.

All-normal dispersion supercontinuum (ANDi SC) generation in a lead-bismuth-gallate glass solid-core photonic crystal fiber (PCF) with cladding air-holes infiltrated with carbon tetrachloride (CCl4) is experimentally investigated and numerically verified. The liquid infiltration results in additional degrees of freedom that are complimentary to conventional dispersion engineering techniques and that allow the design of soft-glass ANDi fibers with an exceptionally flat near-zero dispersion profile. The unique combination of high nonlinearity and low normal dispersion enables the generation of a coherent, low-noise SC covering 0.93-2.5 µm requiring only 12.5 kW of pump peak power delivered by a standard ultrafast erbium-fiber laser with 100 MHz pulse repetition rate (PRR). This is a much lower peak power level than has been previously required for the generation of ANDi SC with bandwidths exceeding one octave in silica- or soft-glass fibers. Our results show that liquid-composite fibers are a promising pathway for scaling the PRR of ANDi SC sources by making the concept accessible to pump lasers with hundreds of megahertz of gigahertz PRR that have limited peak power per pulse but are often required in applications such as high-speed nonlinear imaging, optical communications, or frequency metrology. Furthermore, due to the overlap of the SC with the major gain bands of many rare-earth fiber amplifiers, our source could serve as a coherent seed for low-noise ultrafast lasers operating in the short-wave infrared spectral region.

Integration of alumina-phosphate glass with cobalt-doped magnesium aluminate structure using a hot embossing technique for microlaser development.

In this work, the technique of hot embossing has been applied for the bonding of alumina-phosphate (PAL) glass with cobalt-doped magnesium aluminate (MALO) crystals. The application of the hot embossing technique for bonding of PAL/MALO is a competitive method, as compared to the existing thermobonding techniques. The obtained PAL/MALO interfaces show high quality, similar to what is currently achievable with other, more expensive traditional methods. The interfaces of the bonded samples have been successfully tested for strength and damage thresholds. The damage threshold is estimated to be around 4.5-7.9kW/cm2. Therefore, microlasers can be developed based on the obtained components.

Silica-based photonic crystal fiber infiltrated with 1,2-dibromoethane for supercontinuum generation.

This study proposes a photonic crystal fiber (PCF) made of fused silica glass with the core infiltrated with 1,2-dibromoethane (C2H4Br2) as a new source of supercontinuum light pulses. Due to the modifications of the PCF's structure geometry, a number of computer simulations investigating their optimized structures has been carried out. This aimed at achieving flat near-zero dispersion and zero dispersion wavelength matching of the pump wavelength for efficient spectral broadening. Based on the obtained results, the structural geometries of two C2H4Br2-core PCFs were optimized using numerical modeling for broadband supercontinuum (SC) generation. The first fiber structure with a lattice constant 1.5 µm and filling factor 0.4 has all-normal dispersion profile. The SC with a broadened spectral bandwidth from 0.64 to 1.70 µm is generated by pump pulses centered at a wavelength of 1.03 µm, 120 fs duration, and energy of 1.5 nJ. The second proposed structure-with lattice constant 1.5 µm and filling factor 0.65-has anomalous dispersion for wavelengths longer than 1.03 µm. We obtained high coherence of the SC pulses in the anomalous dispersion range over wavelengths of 0.7-2.4 µm with the same pump pulse as the first fiber and with input energy of 0.09 nJ. These fibers would be interesting candidates for all-fiber SC sources operating with low-energy pump lasers as cost-effective alternatives to glass core fibers.

Numerical analysis of optical vortices generation with nanostructured phase masks.

We study the theoretical formation of optical vortices using a nanostructured gradient index phase mask. We consider structures composed of spatially distributed thermally matched glass nanorods with high and low refractive indices. Influence of effective refractive profile distribution, refractive index contrast of component glasses and charge value on the quality of generation of vortices are discussed. A trade-off between waveguiding and phase modulation effects for various refractive index contrast is presented and analysed.

Antiresonant fibers with single- and double-ring capillaries for optofluidic applications.

In this work we discuss the effect of infiltration of different antiresonant fibers with low-refractive-index liquids, such as water and ethanol, on their optical properties. The fibers with single- and double-ring capillaries have been designed to show broad transmission bands in visible and near infrared range as it is required for optofluidics, in particular spectrophotometric applications. We show experimentally that their transmission windows shift toward shorter wavelengths and only modestly reduce their width. The transmission bands are located in the wavelength ranges of 533-670 nm and 707-925 nm, for the fibers when infiltrated with water. The two types of analyzed antiresonant fibers infiltrated with the liquids show similar light guidance properties when they are straight, but significantly lower bending loss can be achieved for the double-ring than for the single-ring antiresonant fiber. For this reason, the double-ring antiresonant fibers are more suitable as a compact solution for optofluidic applications, although transmission windows are reduced due to broader resonance peaks.

Enhancement of spectral response of Bragg gratings written in nanostructured and multi-stepped optical fibers with radially shaped GeO2 concentration.

We present experimental results on fiber Bragg gratings inscription in nanostructured graded-index (nGRIN) and multi-step index (MSIN) optical fibers, both having non-uniform radial distribution of GeO2 dopant in the fiber cores. In particular, the positive role of radial shaping the GeO2 distribution in the fiber core on grating reflection efficiency is reported. We postulate that an appropriate spatial distribution of the germanium concentration that matches the fundamental mode profile improves grating spectral response due to more efficient grating-mode interaction, as compared with uniformly doped step-index optical fibers with the same overall doping level. Moreover, we show that radially shaped fibers exhibit moderately higher temperature responses than their step-index counterparts.

Birefringent large-mode-area anti-resonant hollow core fiber in the 1.9 µm wavelength window.

We report on the development and characterization of a birefringent large-mode-area anti-resonant silica fiber. The fiber structure is composed of six non-touching capillaries. The birefringence results from the breaking of the circular symmetry of an air core with increasing of the diameters of two capillaries located across the fiber diameter. We depart from earlier designs of polarizing hollow core fibers, in which coupling of the guided modes was intentionally facilitated with the cladding layout. Instead, with the help of numerical simulations, we enhance birefringence in our design by varying the capillary wall thickness between the larger- and smaller-diameter capillary sections of the cladding. The fiber has a large, elliptical core with semi-axes of ∼55 and 41 µm in diameter, an effective area of the fundamental mode of 1200µm2, and a total outer diameter of 127 µm. The cladding is composed of two pairs of smaller capillaries, which are 18 µm in diameter with 1.66 µm thick walls, and two larger capillaries with a 24 µm diameter and 1.14 µm thick walls, located across the diagonal of the fiber. Measured group birefringence over 1820-1920 nm wavelengths is monotonically increasing from 0.4×10-4 to 2.0×10-4, while its phase birefringence is from 5×10-6 to 1.1×10-5. Despite this, the fiber holds polarization with a 12 dB polarization extinction ratio at 1900 nm over a 1.5 m long sample.

Femtosecond supercontinuum generation around 1560 nm in hollow-core photonic crystal fibers filled with carbon tetrachloride.

We investigated experimentally supercontinuum generation in hollow-core photonic crystal fibers with cores infiltrated with carbon tetrachloride. As a pump source, we used a standard fiber-based femtosecond laser with a central wavelength at 1560 nm and a pulse duration of 90 fs. The first investigated fiber has a zero-dispersion wavelength at 1740 nm and generates a supercontinuum in the wavelength range from 1350 to 1900 nm. The second fiber has a zero-dispersion wavelength at 1440 nm, and the observed supercontinuum spectrum ranges from 1000 to 1900 nm. We numerically analyzed coherence of simulated supercontinuum pulses and noted that the observed supercontinuum spectra had a potential for high coherence. While the dynamics of supercontinuum generation in each of the investigated cases was revealed to be in agreement with the established state of the art in nonlinear fiber optics, our results are the first demonstration of such dynamics, to the best of our knowledge, leading up to octave spanning supercontinuum spectra in liquid-filled hollow-core silica fibers under pumping with a small-footprint femtosecond laser.

Light field camera based on hexagonal array of flat-surface nanostructured GRIN lenses.

In this paper we present a light field camera system where a flat-surface hexagonal array of nanostructured gradient index lenses was used as a lens matrix. In our approach we use an array of 469 gradient index microlenses with a diameter of 20 µm and 100% fill factor. To develop the single lens and the lenslet array we used a modified stack-and-draw technology. In this technique, variation of refractive index is achieved by using quantized gradient index profiles and rods from different types of glasses. We show experimental results of using this type of lenses for imaging in a system of two kinds of light field cameras. In the first one, the microlens array is located in the focal plane of the main lens. The image is reconstructed, in this case using a Fourier slice photography algorithm. This allowed a partial reconstruction of a 3D scene with spatial and depth resolution of 20 µm and field of view of 500×500×500 µm. In the second configuration, the microlens array is located between a sample and a microscopic objective, thus allowing for superresolution 3D reconstruction of a microscopic image. The scale-invariant feature transform method was used for image reconstruction and obtained a partial 3D reconstruction with a field of view of 150×115×80 µm and a spatial resolution of 2 µm and depth resolution of 10 µm.

Development of large diameter nanostructured GRIN microlenses enhanced with temperature-controlled diffusion.

Nanostructured GRIN components are optical elements which can have an arbitrary refractive index profile while retaining flat-parallel entry and exit facets. A method of their fabrication requires assembly of large quantities of glass rods in order to satisfy subwavelength requirement of the effective medium theory. In this paper, we present a development of gradient index microlenses using a combination of methods: nanostructurization of the preform and controlled diffusion process during lens drawing on a fiber drawing tower. Adding a diffusion process allows us to overcome limits of the effective medium theory related to maximum size of nanorods in the lens structure. We show that nanorods are dissolved during the fiber drawing process in high temperature and glass components are locally quasi-uniformly distributed. To demonstrate feasibility of the proposed approach, we have developed and experimentally verified the performance of a nGRIN microlens with a diameter of 115 µm composed of 115 rods on the diagonal, and length of 200 µm devoted to work for the wavelength over 658 nm.

Inscription of Bragg gratings in nanostructured graded index single-mode fibers.

We report on efficient inscription of fiber Bragg gratings (FBGs) in a new type of single mode fiber with nanostructured core and with an effective parabolic graded index profile, using the standard phase mask method and a 248 nm pulsed laser. A nanostructured core allows to obtain high concentration of GeO2 in subwavelength glass rods and simultaneously to maintain low average germanium dopant level of silica similarly to standard single mode fibers. We showed that in a nanostructured core fiber, a factor of 3 better efficiency in gratings inscription was achieved, although the fiber has 20% lower average concentration of GeO2 with respect to SMF-28. In the nanostructured fiber we obtained a significant improvement in temperature sensitivity, while the strain sensitivity of FBG in nGRIN optical fiber is the same as in case of standard single-mode fiber (SMF-28). We have measured the strain sensitivity of 0.72 × 10-6 1/µÎµ (1.11 pm/µÎµ@1.53µm), and the temperature sensitivity is about 30% higher than for FBG in SMF-28 and equals to 10.2 × 10-6 1/K (15.6 pm/K@1.53µm).

Optical fibers with open side channel by wet etching.

The paper presents a new approach to developing exposed-core fibers. We designed a new asymmetric structure of suspended core fibers with series of additional air holes in the cladding. Using the standard wet etching method we removed a part of glass, demonstrating that the method allows to open a selected air hole surrounding the suspended core. Such modified of fibers can be used to build sensors and devices dedicated to chemical and biological studies and based on the interaction of light with liquids. We used the developed fiber to develop an interferometric sensor that measures changes in the refractive index with a high accuracy. As a proof of concept, we present the experimental measurement results of the ethanol concentration in water.

Nanostructured graded-index core chalcogenide fiber with all-normal dispersion-design and nonlinear simulations.

We propose a new approach to developing of graded-index chalcogenide fibers. Since chalcogenide glasses are incompatible with current vapor deposition techniques, the arbitrary refractive index gradient is obtained by means of core nanostructurization by the effective medium approach. We study the influence of graded-index core profile and the core diameter on the fiber dispersion characteristics. Flat, normal dispersion profiles across the mid-infrared transmission window of the assumed glasses are easily obtained for the investigated core nanostructure layouts. Nonlinear propagation simulations enable to expect 3.5-8.5 µm spectrum of coherent, pulse preserving supercontinuum. Fabrication feasibility of the proposed fiber is also discussed.