Structural Properties of Some Vacancy-Ordered Platinum Halide Perovskites.

The structural changes that accompany the dehydration of Na2PtX6·6H2O (X = Cl, Br) were studied using in situ variable temperature synchrotron X-ray diffraction. The two hexahydrates are isostructural, containing isolated PtX6 octahedra separated by Na cations. Removal of the water results in the formation of the anhydrous vacancy ordered double perovskites Na2PtX6. The Na cation is too small for the cuboctahedron site of the parent cubic structure, resulting in cooperative tilting of the PtX6 octahedra and lowering of the symmetry. Replacing Na with a larger alkali metal (K, Rb, or Cs) invariably enabled the isolation of the anhydrous hexahalide, and we found no evidence that these readily hydrated. For all cations, other than Na, it was possible to observe the archetypical cubic structure, although for the two potassium salts K2PtBr6 and K2PtI6, this was only observed above a critical temperature of 175 and 460 K, respectively. As these two samples were cooled, symmetry lowering was observed, yielding a tetragonal structure initially and ultimately a monoclinic structure: Fm3̅m → P4/mnc → P21/n. These phase transitions are associated with the onset of long-range cooperative tilting of the PtX6 octahedra described using the Glazer tilt notation as a0a0a0 → a0a0c+ → a-a-c+.

Tetrahedra Rotational and Displacive Disorder in the Scheelite-Type Oxide CsReO4.

Scheelite-type metal oxides are a notable class of functional materials, with applications including ionic conductivity, photocatalysis, and the safe storage of radioactive waste. To further engineer these materials for specific applications, a detailed understanding of how their properties can change under different conditions is required─not just in the long-range average structure but also in the short-range local structure. This paper outlines a detailed investigation of the metal oxide CsReO4, which exhibits an uncommon orthorhombic Pnma pseudo-scheelite-type structure at room temperature. Using synchrotron X-ray diffraction, the average structure of CsReO4 is found to undergo a transformation from the orthorhombic Pnma pseudo-scheelite-type structure to the tetragonal I41/a scheelite-type structure at ∼440 K. In the X-ray pair distribution function analysis, lattice strain and rotations of the ReO4 tetrahedra are apparent above 440 K despite the increase in long-range average symmetry, revealing a disconnect between the structural models at different length scales. This study demonstrates how the bonding requirements and ionic radii of the A-site cation can induce disorder that is detectable at different length scales, affecting the physical properties of the material.

Seeing the Unseen: The Structural Influence of the Lone Pair Electrons in PbWO4.

Pair distribution function (PDF) analysis of the scheelite-type material PbWO4 reveals previously unidentified short-range structural distortions in the PbO8 polyhedra and WO4 tetrahedra not observed in the similarly structured CaWO4. These local distortions are a result of the structural influence of the Pb2+ 6s2 lone pair electrons. These are not evident from the Rietveld analysis of synchrotron X-ray or neutron powder diffraction data, nor do they strongly influence the X-ray PDF (XPDF). This illustrates the importance of neutron PDF (NPDF) in the study of such materials. First-principles density function theory (DFT) calculations show that the Pb2+ 6s2 electrons are hybridized with the O2- 2p electrons near the Fermi level. The presence of local-scale distortions has previously been neglected in studies of structure-functionality relationships in PbWO4 and other scheelite-structured photocatalytic materials, including BiVO4, and this observation opens new avenues for their optimization.

Understanding the Re-entrant Phase Transition in a Non-magnetic Scheelite.

The stereochemical activity of lone pair electrons plays a central role in determining the structural and electronic properties of both chemically simple materials such as H2O, as well as more complex condensed phases such as photocatalysts or thermoelectrics. TlReO4 is a rare example of a non-magnetic material exhibiting a re-entrant phase transition and emphanitic behavior in the long-range structure. Here, we describe the role of the Tl+ 6s2 lone pair electrons in these unusual phase transitions and illustrate its tunability by chemical doping, which has broad implications for functional materials containing lone pair bearing cations. First-principles density functional calculations clearly show the contribution of the Tl+ 6s2 in the valence band region. Local structure analysis, via neutron total scattering, revealed that changes in the long-range structure of TlReO4 occur due to changes in the correlation length of the Tl+ lone pairs. This has a significant effect on the anion interactions, with long-range ordered lone pairs creating a more densely packed structure. This resulted in a trade-off between anionic repulsions and lone pair correlations that lead to symmetry lowering upon heating in the long-range structure, whereby lattice expansion was necessary for the Tl+ lone pairs to become highly correlated. Similarly, introducing lattice expansion through chemical pressure allowed long-range lone pair correlations to occur over a wider temperature range, demonstrating a method for tuning the energy landscape of lone pair containing functional materials.

Subcellular mechano-microscopy: high resolution three-dimensional elasticity mapping using optical coherence microscopy.

The importance of cellular-scale mechanical properties is well-established, yet it is challenging to map subcellular elasticity in three dimensions. We present subcellular mechano-microscopy, an optical coherence microscopy (OCM)-based variant of three-dimensional (3-D) compression optical coherence elastography (OCE) that provides an elasticity system resolution of 5 × 5 × 5 µm: a 7-fold improvement in system resolution over previous OCE studies of cells. The improved resolution is achieved through a ∼5-fold improvement in optical resolution, refinement of the strain estimation algorithm, and demonstration that mechanical deformation of subcellular features provides feature resolution far greater than that demonstrated previously on larger features with diameter >250 µm. We use mechano-microscopy to image adipose-derived stem cells encapsulated in gelatin methacryloyl. We compare our results with compression OCE and demonstrate that mechano-microscopy can provide contrast from subcellular features not visible using OCE.

Structural and Magnetic Properties of Some Vacancy-Ordered Osmium Halide Perovskites.

The structures and magnetic properties of the Os4+ (5d4) halides K2OsCl6, K2OsBr6, Na2OsBr6, and Na2OsBr6·6H2O are described. K2OsCl6 and K2OsBr6 have a cubic vacancy-ordered double perovskite structure but undergo different symmetry-lowering structural phase transitions upon cooling associated with a combination of the relative size of the ions and differences in their chemical bonding. The structure of Na2OsBr6·6H2O has been determined for the first time and the thermal stability of this has been established using a combination of in situ diffraction and TGA. Na2OsBr6·6H2O and Na2OsBr6 are isostructural with the analogous iridium chlorides, Na2IrCl6·6H2O and Na2IrCl6, and dehydration proceeds via different intermediate phases. The magnetic moments of four compounds display a Kotani-like behavior consistent with a Jeff = 0 ground state; however, the magnetic susceptibility measurements reveal unusual low temperature properties indicative of a weak magnetic ground state.

Tetrahedral Displacive Disorder in the Scheelite-Type Oxide RbReO4.

Oxides exhibiting the scheelite-type structure are an important class of functional materials with notable applications in photocatalysis, luminescence, and ionic conductivity. Like all materials, understanding their atomic structure is fundamental to engineering their physical properties. This study outlines a detailed structural investigation of the scheelite-type oxide RbReO4, which exhibits a rare long-range phase transition from I41/a to I41/amd upon heating. Additionally, in the long-range I41/a model, the Re-O tetrahedral distance undergoes significant contraction upon warming. Recent studies of other scheelite oxides have attributed this apparent contraction to incoherent local-scale tetrahedral rotations. In this study, we use X-ray pair distribution function analysis to show that RbReO4 undergoes a unique symmetry-lowering process on the local scale, which involves incoherent tetrahedral displacements. The rare I41/a to I41/amd long-range phase transition was found to occur via a change from static to dynamic disorder on the local scale, which is due to the combination of the size of the A-site cation and lattice expansion. This demonstrates how careful manipulation of the ionic radius of the A-site in the scheelite structure can be used to induce local-scale disorder, which has valuable implications for tailoring the physical properties of related materials.

Speckle-dependent accuracy in phase-sensitive optical coherence tomography.

Phase-sensitive optical coherence tomography (OCT) is used to measure motion in a range of techniques, such as Doppler OCT and optical coherence elastography (OCE). In phase-sensitive OCT, motion is typically estimated using a model of the OCT signal derived from a single reflector. However, this approach is not representative of turbid samples, such as tissue, which exhibit speckle. In this study, for the first time, we demonstrate, through theory and experiment that speckle significantly lowers the accuracy of phase-sensitive OCT in a manner not accounted for by the OCT signal-to-noise ratio (SNR). We describe how the inaccuracy in speckle reduces phase difference sensitivity and introduce a new metric, speckle brightness, to quantify the amount of constructive interference at a given location in an OCT image. Experimental measurements show an almost three-fold degradation in sensitivity between regions of high and low speckle brightness at a constant OCT SNR. Finally, we apply these new results in compression OCE to demonstrate a ten-fold improvement in strain sensitivity, and a five-fold improvement in contrast-to-noise by incorporating independent speckle realizations. Our results show that speckle introduces a limit to the accuracy of phase-sensitive OCT and that speckle brightness should be considered to avoid erroneous interpretation of experimental data.

Coherence function-encoded optical palpation.

Optical palpation maps stress at the surface of biological tissue into 2D images. It relies on measuring surface deformation of a compliant layer, which to date has been performed with optical coherence tomography (OCT). OCT-based optical palpation holds promise for improved clinical diagnostics; however, the complexity and cost hinder broad adoption. In this Letter, we introduce coherence function-encoded optical palpation (CFE-OP) using a novel optical profilometry technique that exploits the envelope of the coherence function rather than its peak position, which is typically used to retrieve depth information. CFE-OP utilizes a Fabry-Perot laser diode (bandwidth, 2.2 nm) and a single photodiode in a Michelson interferometer to detect the position along the coherence envelope as a function of path length. This technique greatly reduces complexity and cost in comparison to the OCT-based approach. We perform CFE-OP on phantom and excised human breast tissue, demonstrating comparable mechanical contrast to OCT-based optical palpation and the capability to distinguish stiff tumor from soft benign tissue.

Phase Analysis of Australian Uranium Ore Concentrates Determined by Variable Temperature Synchrotron Powder X-ray Diffraction.

The chemical speciation of uranium oxides is sensitive to the provenance of the samples and their storage conditions. Here, we use diffraction methods to characterize the phases found in three aged (>10 years) uranium ore concentrates of different origins as well as in situ analysis of the thermally induced structural transitions of these materials. The structures of the crystalline phases found in the three samples have been refined, using high-resolution synchrotron X-ray diffraction data. Rietveld analysis of the samples from the Olympic Dam and Ranger uranium mines has revealed the presence of crystalline α-UO2(OH)2, together with metaschoepite (UO2)4O(OH)6·5H2O, in the aged U3O8 samples, and it is speculated that this forms as a consequence of the corrosion of U3O8 in the presence of metaschoepite. The third sample, from the Beverley uranium mine, contains the peroxide [UO2(η2-O2)(H2O)2] (metastudtite) together with α-UO2(OH)2 and metaschoepite. A core-shell model is proposed to account for the broadening of the diffraction peaks of the U3O8 evident in the samples.

Effect of Long- and Short-Range Disorder on the Oxygen Ionic Conductivity of Tm2(Ti2-xTmx)O7-x/2 "Stuffed" Pyrochlores.

The long-range average and short-range local structures in the Tm2(Ti2-xTmx)O7-x/2 (x = 0.00-0.67) series were studied using a combination of diffraction and spectroscopic techniques. The long-range average structure, established from synchrotron X-ray and neutron powder diffraction data, shows the development of multiphase regions from x = 0.134 and the formation of antisite cation disorder from x = 0.402. The crystal field splitting of the Ti4+ ions, as derived from the Ti L3-edge X-ray absorption near-edge structure (XANES) spectroscopy, decreases gradually from 2.17 to 1.92 eV with increasing Tm3+ content (x), reflecting the increase in coordination number from 6 to predominantly 7. This is consistent with a gradual evolution of the short-range local disorder from x = 0.00 to 0.67. These results suggest that local disorder develops gradually throughout the entire composition range, whereas changes in the long-range disorder occur more suddenly. Electrochemical impedance spectroscopic results show an increase in oxygen ionic conductivity at 1000 °C, by a factor of 4 upon doping at x = 0.268. This suggests that inducing small amounts of disorder into the pyrochlore structure, by stuffing, may lead to applications of this material as a solid electrolyte in solid-oxide fuel cells.

Tilting and Distortion in Rutile-Related Mixed Metal Ternary Uranium Oxides: A Structural, Spectroscopic, and Theoretical Investigation.

A systematic investigation examining the origins of structural distortions in rutile-related ternary uranium AUO4 oxides using a combination of high-resolution structural and spectroscopic measurements supported by ab initio calculations is presented. The structures of ß-CdUO4, MnUO4, CoUO4, and MgUO4 are determined at high precision by using a combination of neutron powder diffraction (NPD) and synchrotron X-ray powder diffraction (S-XRD) or single crystal X-ray diffraction. The structure of ß-CdUO4 is best described by space group Cmmm whereas MnUO4, CoUO4, and MgUO4 are described by the lower symmetry Ibmm space group and are isostructural with the previously reported ß-NiUO4 [Murphy et al. Inorg. Chem. 2018, 57, 13847]. X-ray absorption spectroscopy (XAS) analysis shows all five oxides contain hexavalent uranium. The difference in space group can be understood on the basis of size mismatch between the A2+ and U6+ cations whereby unsatisfactory matching results in structural distortions manifested through tilting of the AO6 polyhedra, leading to a change in symmetry from Cmmm to Ibmm. Such tilts are absent in the Cmmm structure. Heating the Ibmm AUO4 oxides results in reduction of the tilt angle. This is demonstrated for MnUO4 where in situ S-XRD measurements reveal a second-order phase transition to Cmmm near T = 200 °C. Based on the extrapolation of variable temperature in situ S-XRD data, CoUO4 is predicted to undergo a continuous phase transition to Cmmm at ∼1475 °C. Comparison of the measured and computed data highlights inadequacies in the DFT+U approach, and the conducted analysis should guide future improvements in computational methods. The results of this investigation are discussed in the context of the wider AUO4 family of oxides.

COVID-19 in Australia: our national response to the first cases of SARS-CoV-2 infection during the early biocontainment phase.

BACKGROUND: On 31 December 2019, the World Health Organization recognised clusters of pneumonia-like cases due to a novel coronavirus disease (COVID-19). COVID-19 became a pandemic 71 days later. AIM: To report the clinical and epidemiological features, laboratory data and outcomes of the first group of 11 returned travellers with COVID-19 in Australia. METHODS: This is a retrospective, multi-centre case series. All patients with confirmed COVID-19 infection were admitted to tertiary referral hospitals in New South Wales, Queensland, Victoria and South Australia. RESULTS: The median age of the patient cohort was 42 years (interquartile range (IQR), 24-53 years) with six men and five women. Eight (72.7%) patients had returned from Wuhan, one from Shenzhen, one from Japan and one from Europe. Possible human-to-human transmission from close family contacts in gatherings overseas occurred in two cases. Symptoms on admission were fever, cough and sore throat (n = 9, 81.8%). Co-morbidities included hypertension (n = 3, 27.3%) and hypercholesterolaemia (n = 2, 18.2%). No patients developed severe acute respiratory distress nor required intensive care unit admission or mechanical ventilation. After a median hospital stay of 14.5 days (IQR, 6.75-21), all patients were discharged. CONCLUSIONS: This is a historical record of the first COVID-19 cases in Australia during the early biocontainment phase of the national response. These findings were invaluable for establishing early inpatient and outpatient COVID-19 models of care and informing the management of COVID-19 over time as the outbreak evolved. Future research should extend this Australian case series to examine global epidemiological variation of this novel infection.

Impact of Li Doping on the Structure and Phase Stability in AgNbO3.

The impact of Li doping on the temperature-induced phase transitions in silver niobates Ag1-xLixNbO3 has been investigated using a combination of high-resolution powder neutron diffraction and synchrotron X-ray diffraction. Considering both the cell metric and distortions of the NbO6 octahedra, estimated by Rietveld refinements, it is shown that the sequence of temperature-induced phases in AgNbO3 is P21am → Pcam → Cmcm → P4/mbm → Pm3̅m. This sequence is simpler than that proposed in earlier studies. Evidence is presented for a second-order Jahn-Teller distortion in the Pcam phase. At x > 0.05, Li doping favors the formation of a rhombohedral phase in space group R3c, and such samples display the temperature-induced sequence R3c → Pbnm → Cmcm → P4/mbm → Pm3̅m. Unusual volume changes associated with the phase transitions point to the potential importance of lattice matching in optimizing the properties of thin films of doped AgNbO3.

Structural Chemistry and Magnetic Properties of the Hexagonal Double Perovskite Ba2CoOsO6.

The double perovskite Ba2CoOsO6, synthesized using solid-state methods at ambient pressure, is shown as a rare example of an oxide adopting the 6L-trigonal (S.G.: P3̅m1) perovskite structure. The structure, refined using a combination of X-ray and neutron diffraction data, showed the Co and Os were ordered over the two dimer sites with additional ordering over the corner-sharing sites. Bond valence calculations show the presence of the Co(II) and Os(VI) valence states, and the latter was confirmed using X-ray absorption spectroscopy. Bulk magnetic susceptibility measurements show Ba2CoOsO6 to undergo antiferromagnetic ordering near 100 K, and neutron diffraction showed an ordered moment on the Co3, Co4, and Os2 sites; whereas the Os1/Co1 remained disordered.

Structure Evolution of Na2O2 from Room Temperature to 500 °C.

Na2O2 is one of the possible discharge products from sodium-air batteries. Here, we report the evolution of the structure of Na2O2 from room temperature to 500 °C using variable-temperature neutron and synchrotron X-ray powder diffraction. A phase transition from α-Na2O2 to ß-Na2O2 is observed in the neutron diffraction measurements above 400 °C, and the crystal structure of ß-Na2O2 is determined from neutron diffraction data at 500 °C. α-Na2O2 adapts a hexagonal P62m (no. 189) structure, and ß-Na2O2 adapts a tetragonal I41/acd (no. 142) structure. The thermal expansion coefficients of α-Na2O2 are a = 2.98(1) × 10-5 K-1, c = 2.89(1) × 10-5 K-1, and V = 8.96(1) × 10-5 K-1 up to 400 °C, and a ∼10% volume expansion occurs during the phase transition from α-Na2O2 to ß-Na2O2 due to the realignment/rotation of O22- groups. Both phases are electronic insulators according to DFT calculations with band gaps (both indirect) of 1.75 eV (α-Na2O2) and 2.56 eV (ß-Na2O2). An impedance analysis from room temperature to 400 °C revealed a significant enhancement of the conductivity at T ≥ 275 °C. α-Na2O2 shows a higher conductivity (∼10 times at T ≤ 275 °C and ∼3 times at T > 275 °C) in O2 compared to in Ar. We confirmed, by dielectric analysis, that this enhanced conductivity is dominated by ionic conduction.

Structural and Magnetic Studies of ABO4-Type Ruthenium and Osmium Oxides.

Oxides of the form ABO4 with A = K, Rb, Cs and B = Ru and Os have been synthesized and characterized by diffraction and magnetic techniques. For A = K the oxides adopted the tetragonal (I41/a) scheelite structure. RbOsO4, which crystallizes as a scheelite at room temperature, underwent a continuous phase transition to I41/amd near 550 K. RbRuO4 and CsOsO4 were found to crystallize in the orthorhombic (Pnma) pseudoscheelite structure, and both displayed discontinuous phase transitions to I41/a at high temperatures. CsOsO4 was determined to undergo a phase transition to a P21/c structure below 140 K. CsRuO4 crystallizes with a baryte-type structure at room temperature. Upon heating CsRuO4 a first order phase transition to the scheelite structure in I41/a is observed at 400 K. A continuous phase transition is observed to P212121 below 140 K. DC magnetic susceptibility data is consistent with long-range antiferromagnetic ordering at low temperatures for all compounds except for CsOsO4, which is paramagnetic to 2 K. The effective magnetic moments are in agreement with the spin only values for an S = 1/2 quantum magnet. Effective magnetic moments calculated for Os compounds were lower than their Ru counterparts, reflective of an enhanced spin orbit coupling effect. A magnetic structure is proposed for RbRuO4 consisting of predominately antiferromagnetic (AFM) ordering along the 001 direction, with canting of spins in the 100 plane. A small ordered magnetic moment of 0.77 µB was determined.

Probing the Site-Selective Doping in SrSnO3:Eu Oxides and Its Impact on the Crystal and Electronic Structures Using Synchrotron Radiation and DFT Simulations.

The impact of Eu3+ doping at the Sr2+ and Sn4+ sites in SrSnO3 on its structural and electronic properties was studied and correlated with the photocatalytic efficiency. The compounds were synthesized using a modified Pechini method. Refinement of the synchrotron X-ray diffraction (S-XRD) data showed that the samples had an orthorhombic Pbnm symmetry. The incorporation of Eu into the lattice led to increased short- and long-range disorder, inducing additional distortion in the SnO6. XANES measurements revealed that mixed Eu valences (Eu3+ and Eu2+) were present in Eu-doped samples, and DFT calculations confirmed the presence of these ions at Sr2+/Sr4+ sites in the SrSnO3, resulting in changes in the electronic behavior. The catalytic performance toward Remazol yellow dye photodegradation and the catalysts' surface properties were also evaluated. The catalytic efficiency followed the order of Sr(Sn0.99Eu0.01)SnO3 > (Sr0.99Eu0.01)SnO3 > SrSnO3. The order was clearly related to selected-site doping that changed the degree of the inter- and intraoctahedral distortion and the introduction of different Eu midgap states, which apparently favor charge separation upon photoexcitation during photocatalysis. The results shown here are of great importance to the functionalization of SrSnO3 and other perovskite materials by lanthanoid ions, especially Eu3+, for effective applications as photocatalysts.

Stem cell migration and mechanotransduction on linear stiffness gradient hydrogels.

The spatial presentation of mechanical information is a key parameter for cell behavior. We have developed a method of polymerization control in which the differential diffusion distance of unreacted cross-linker and monomer into a prepolymerized hydrogel sink results in a tunable stiffness gradient at the cell-matrix interface. This simple, low-cost, robust method was used to produce polyacrylamide hydrogels with stiffness gradients of 0.5, 1.7, 2.9, 4.5, 6.8, and 8.2 kPa/mm, spanning the in vivo physiological and pathological mechanical landscape. Importantly, three of these gradients were found to be nondurotactic for human adipose-derived stem cells (hASCs), allowing the presentation of a continuous range of stiffnesses in a single well without the confounding effect of differential cell migration. Using these nondurotactic gradient gels, stiffness-dependent hASC morphology, migration, and differentiation were studied. Finally, the mechanosensitive proteins YAP, Lamin A/C, Lamin B, MRTF-A, and MRTF-B were analyzed on these gradients, providing higher-resolution data on stiffness-dependent expression and localization.

Synthesis-Controlled Polymorphism and Magnetic and Electrochemical Properties of Li3Co2SbO6.

Li3Co2SbO6 is found to adopt two highly distinct structural forms: a pseudohexagonal (monoclinic C2/m) layered O3-LiCoO2 type phase with "honeycomb" 2:1 ordering of Co and Sb, and an orthorhombic Fddd phase, isostructural with Li3Co2TaO6 but with the addition of significant Li/Co ordering. Pure samples of both phases can be obtained by conventional solid-state synthesis via a precursor route using Li3SbO4 and CoO, by controlling particle size, initial lithium excess, and reaction time. Both phases show relatively poor performance as lithium-ion battery cathode materials in their as-made states, but complex and interesting low-temperature magnetic properties. The honeycomb phase is the first of its type to show A-type antiferromagnetic order (ferromagnetic planes, antiferromagnetically coupled) below TN = 14 K. Isothermal magnetization and in-field neutron diffraction below TN show clear evidence for a metamagnetic transition at H ≈ 0.7 T to three-dimensional ferromagnetic order. The orthorhombic phase orders antiferromagnetically below TN = 112 K and then undergoes two more transitions at 80 and 60 K. Neutron diffraction data show that the ground state is incommensurate.