Cholecalciferol- and α-tocopherol-loaded walnut oil emulsions stabilized by whey protein isolate and soy lecithin for food applications.

BACKGROUND: To overcome the limitations in the use of protein as an emulsifier, soy lecithin, a natural surfactant, was used along with whey protein isolate (WPI) to produce o/w emulsions containing cholecalciferol and α-tocopherol. The physical stability of the emulsions prepared with WPI and varying concentrations of lecithin (0, 1, 2, and 3% w/w) was measured in different heat, pH, and ionic-strength food environmental conditions. RESULTS: All emulsions were shown to be less than 250 nm in size and less than 0.3 in polydispersity index (PDI). The morphology of the emulsions was spherical, and the droplets of the emulsion containing lecithin were thicker and larger than those of the emulsion without lecithin (WPI_L0). After autoclaving, WPI_L0 increased in size from 197.8 ± 1.7 nm to 528.5 ± 28.4 nm, and the retention of cholecalciferol and α-tocopherol decreased to 40.83 ± 0.63% and 49.68 ± 1.84%, respectively. At pH 5.5, near the isoelectric point of WPI, WPI_L0 increased in size due to aggregation, but emulsions containing lecithin remained stable at a PDI under 0.3. Turbiscan stability index of the emulsion prepared with WPI and 3% lecithin was the lowest, indicating good storage stability. In addition, it was confirmed that the higher the lecithin content, the higher the viscosity, and the higher the amount of free fatty acids released in the in vitro digestion model. CONCLUSION: This study can provide theoretical evidence for enhancing the physical stability of protein emulsions by co-stabilization with lecithin, promoting their application in various foods. © 2022 Society of Chemical Industry.

3D Printing of Materials and Printing Parameters with Animal Resources: A Review.

3D printing technology enables the production of creative and personalized food products that meet consumer needs, such as an attractive visual appearance, fortification of specific nutrients, and modified textures. To popularize and diversify 3D-printed foods, an evaluation of the printing feasibility of various food pastes, including materials that cannot be printed natively, is necessary. Most animal resources, such as meat, milk, and eggs, are not inherently printable; therefore, the rheological properties governing printability should be improved through pre-/post-processing or adding appropriate additives. This review provides the latest progress in extrusion-based 3D printing of animal resource-based inks. In addition, this review discusses the effects of ink composition, printing conditions, and post-processing on the printing performance and characteristics of printed constructs. Further research is required to enhance the sensory quality and nutritional and textural properties of animal resource-based printed foods.

Relationship between rheological properties, sensory perception, and overall acceptability of thickened liquids for dysphagia in young and old healthy individuals.

This study investigated the relationship between rheological properties, sensory perception, and overall acceptability in healthy young and old groups for dysphagia thickened liquids. Unflavored (UTL) and flavored (FTLP) thickened liquids were prepared using tap water or pomegranate juice at 10 different viscosity levels. The rheological properties were then evaluated via syringe flow test and line spread test (LST). When the apparent viscosity levels of UTL and FTLP were similar, the syringe test and LST results were also similar, indicating consistent flow behavior. Sensory perception evaluations showed that the young group better distinguished viscosity differences between stages compared to the old group. Regarding overall acceptability, the old group preferred samples with higher apparent viscosity than the young group. Principal component analysis and k-means cluster analysis were used to explore correlations between variables and classify thickened liquids into four groups. This can serve the foundation for standardized texture grades of dysphagia thickened liquids, considering rheological characteristics and sensory profiles.

Optimization of the QuEChERS-UPLC-APCI-MS/MS method for the analysis of vitamins D and K nanoencapsulated in yogurt.

A novel approach was developed to simultaneously determine the contents of vitamins D2, D3, K1, and K2 in yogurt fortified with nanoencapsulated vitamins D and K. This method combines QuEChERS extraction with UPLC-APCI-MS/MS analysis. Optimization of the QuEChERS process included fine-tuning the addition of salts using response surface methodology based on the Box-Behnken design. Under the optimized conditions, the developed method exhibited an excellent linearity (R2 > 0.999) across concentrations ranging from 0.5 to 500 µg/L. The limits of detection and quantification (LOD and LOQ) were found to be 0.01-0.04 µg/L and 0.04-0.11 µg/L, respectively, with precision, accuracy, and recovery rates exceeding 94.88 %, and accompanied by acceptable relative standard deviations. Comparative analysis with traditional methodologies revealed the significant advantages of the proposed approach. Previous techniques such as liquid-liquid extraction combined with saponification are time-consuming and require high sample quantities. In addition, dispersive liquid-liquid microextraction requires a long analysis time and exhibits a poor sensitivity, particularly in terms of its LOD and LOQ values. In contrast, our method offers a straightforward, efficient, and reliable sample preparation technique suitable for detecting vitamins D2, D3, K1, and K2 in a yogurt matrix. This study not only demonstrates the feasibility of applying the QuEChERS method for stable vitamin quantification in yogurt, but it also represents an innovative contribution to enhancing the detection sensitivity and efficiency in food analysis. By emphasizing these methodological advancements and comparative benefits, this research underscores the significance of adopting advanced analytical approaches in food science.

Mechanisms underlying the changes in the structural, physicochemical, and emulsification properties of porcine myofibrillar proteins induced by prolonged pulsed electric field treatment.

This study aimed to explore how pulsed electric field (PEF) treatment affects the structural, physicochemical, and emulsification properties of porcine-derived myofibrillar proteins (MPs). Increasing PEF treatment induced partial polarization and protein unfolding, resulting in notable denaturation that affected both the secondary and tertiary structures. PEF treatment also improved the solubility and emulsification ability of MPs by reducing their pH and surface hydrophobicity. Confocal laser scanning microscopy confirmed the effective adsorption of MPs and PEF-treated MPs at the oil/water interface, resulting in well-fabricated Pickering emulsions. A weak particle network increased the apparent viscosity in short-term PEF-treated Pickering emulsions. Conversely, in emulsions with long-term PEF-treated MP, rheological variables decreased, and dispersion stability increased. These results endorse the potential application of PEF-treated porcine-derived MPs as efficient Pickering stabilizers, offering valuable insights into the creative use of PEF for enhancing high-quality meat products, meeting the increasing demand for clean-label choices.

Tribological properties of real foods using extended Stribeck curves and their relationship with nutritional and rheological parameters.

The tribological properties of 19 commercial food products, grouped into six categories (yogurt, dressings, spreads, porridges, emulsified sauces, and syrups) were investigated in relation to their rheological (dynamic oscillatory shear test) and nutritional properties (fat, carbohydrate, and protein). A tribological system (a glass ball and three polydimethylsiloxane pins) generated the extended Stribeck curve, monitoring friction factors (f) over an extended range of sliding speed (v) (10-8 to 100 m/s). Tribological parameters (f, v) at four inflection points dividing the frictional regimes (X1, breakaway point between the static and kinetic regimes; X1-X2, boundary; X2-X3, mixed; X3-X4, hydrodynamic regimes) and the slope between X3 and X4 (s) were subjected to principal component analysis and hierarchical clustering on principal components, using rheological and nutritional parameters as quantitative supplementary variables. Tribological patterns were predominantly influenced by viscosity, viscoelasticity, yield stress, fat content, and the presence of particles (e.g., sugar, proteins, and fibers) and pasting materials (e.g., starches and modified starches). The 19 tribological patterns were classified into 3 clusters: low f and s for fat- and/or viscoelastic-dominant foods (Cluster 1), low f and high s for food emulsions and/or those with low extent of shear-thinning (Cluster 2), and high f at the boundary regime either for the most viscous foods or for those in the presence of particulates (Cluster 3). These results suggest that the compositional and rheological properties have a more profound impact on the classification of complex tribological patterns than the categories of food products.

Effect of microparticulated wheat bran on the physical properties of bread.

Wheat bran and flour mixtures were used in a bread formulation to improve its quality characteristics. Wheat bran was microparticulated using a jet mill, and this microparticulated wheat bran (MWB) was substituted for a portion of wheat flour. As the MWB content increased, water-holding capacity, hardness and springiness increased while the swelling property decreased slightly. The hardness of bread containing MWB was lower than that made with commercial whole wheat flour (WWF). Bread containing 7% MWB had a higher specific volume (8.3%) than that of WWF bread. Enthalpy of dough decreased with increasing MWB content, and peak viscosity and breakdown decreased with increasing setback. Inner crust structures of bread containing MWB showed a slight reduction in gelatinization and gluten development in comparison with wheat bread. These results indicate that MWB could be used as a diet-enriching bread ingredient while maintaining bread quality.

Development of meat spread with omega-3 fatty acids derived from flaxseed oil for the elderly: Physicochemical, textural, and rheological properties.

This study evaluates the characteristics of n-3-enriched meat spread that is in development for consumption by elderly individuals. Herein, flaxseed oil was used as a source of n-3 fatty acid, and macro- and nano-sized flaxseed oil emulsions (FOE) were prepared for the fabrication of meat spreads. As the level of FOE was increased in the meat spreads, significant increases in the levels of omega-3 fatty acids (α-linolenic acid) were observed. Emulsion stability and cooking loss were also improved in meat spreads formulated with FOE compared with those the control. In particular, the addition of FOE generated softer and less chewy meat, owing to its lower melting point and rheological properties. However, the high content of unsaturated fatty acids in the FOE-containing meat spreads increased their susceptibility to lipid oxidation meat. These findings indicate that FOE, particularly macro-sized FOE, has the potential for use in n-3 fatty acid enriched meat products that are intended for consumption by elderly individuals but need to be evaluated for their impacts on shelf-life and sensory quality.

Determination of vitamin K encapsulated into lipid nanocarriers by dispersive liquid-liquid microextraction combined with liquid chromatography-atmospheric pressure chemical ionization-tandem mass spectrometry.

Dispersive liquid-liquid microextraction was used in conjunction with liquid chromatography-atmospheric pressure chemical ionization-tandem mass spectrometry to quantitate vitamins K1 and K2 in vitamin-fortified emulsions, and vital microextraction parameters were optimized using response surface methodology coupled with Box-Behnken design. Under optimal microextraction conditions, highly linear (R 2 > .999) calibration curves were obtained for both vitamins in a broad concentration range (1-1000 µg/L), and vitamin recoveries exceeded 90%. The detection and quantitation limits equaled 1.89 and 5.72 µg/L for vitamin K1, respectively, and 5.00 and 15.15 µg/L for vitamin K2, respectively. When applied to vitamin-K-loaded nanoemulsions and solid lipid nanoparticles, the developed method achieved excellent results, outperforming the currently employed Korean Food Code method, and therefore holding great promise for the quantitation of vitamin K in vitamin-fortified food products.

Molecular characterization and functionality of rumen-derived extracellular vesicles using a Caenorhabditis elegans animal model.

The rumen fluids contain a wide range of bacteria, protozoa, fungi, and viruses. The various ruminal microorganisms in the rumen provide nutrients by fermenting the forage they eat. During metabolic processes, microorganisms present in the rumen release diverse vesicles during the fermentation process. Therefore, in this study, we confirmed the function of rumen extracellular vesicles (EVs) and their interaction with the host. We confirmed the structure of the rumen EVs by transmission electron microscope (TEM) and the size of the particles using nanoparticle tracking analysis (NTA). Rumen EVs range in size from 100 nm to 400 nm and are composed of microvesicles, microparticles, and ectosomes. Using the Caenorhabditis elegans smart animal model, we verified the interaction between the host and rumen EVs. Exposure of C. elegans to rumen EVs did not significantly enhance longevity, whereas exposure to the pathogenic bacteria Escherichia coli O157:H7 and Staphylococcus aureus significantly increased lifespan. Furthermore, transcriptome analysis showed gene expression alterations in C. elegans exposed to rumen EVs, with significant changes in the metabolic pathway, fatty acid degradation, and biosynthesis of cofactors. Our study describes the effect of rumen EV interactions with the host and provides novel insights for discovering biotherapeutic agents in the animal industry.

Structural, physicochemical, and immune-enhancing properties of edible insect protein isolates from Protaetia brevitarsis larvae.

Edible insects are promising future food resources globally. Herein, the structural, physicochemical, and bio-functional properties of edible insect protein isolates (EPIs) extracted from Protaetia brevitarsis larvae were investigated. The results showed that EPIs have a high total essential amino acid content; moreover, ß-sheet is the major secondary protein structure. The EPI protein solution was highly soluble and electrically stable and did not aggregate easily. In addition, EPIs exhibited immune-enhancing properties; EPI treatment of macrophages induced the activation of macrophages and consequently promoted the production of pro-inflammatory mediators (NO, TNF-α, and IL-1ß). Moreover, macrophage activation of EPIs was confirmed to occur through the MAPK and NF-κB pathways. In conclusion, our results suggest that the isolated P. brevitarsis protein can be fully utilized as a functional food material and alternative protein source in the future food industry.

Improvement of structural, physicochemical, and rheological properties of porcine myofibrillar proteins by high-intensity ultrasound treatment for application as Pickering stabilizers.

This study aimed to evaluate the potential of time-dependent (0, 15, 30, 60, 120 min) treatment of porcine-derived myofibrillar proteins (MPs) with high-intensity ultrasound (HIU) for utilizing them as a Pickering stabilizer and decipher the underlying mechanism by which HIU treatment increases the emulsification and dispersion stability of MPs. To accomplish this, we analyzed the structural, physicochemical, and rheological properties of the HIU-treated MPs. Myosin heavy chain and actin were observed to be denatured, and the particle size of MPs decreased from 3,342.7 nm for the control group to 153.9 nm for 120 min HIU-treated MPs. Fourier-transformed infrared spectroscopy and circular dichroism spectroscopy confirmed that as the HIU treatment time increased, α-helical content increased, and ß-sheet decreased, indicating that the protein secondary/tertiary structure was modified. In addition, the turbidity, apparent viscosity, and viscoelastic properties of the HIU-treated MP solution were decreased compared to the control, while the surface hydrophobicity was significantly increased. Analyses of the emulsification properties of the Pickering emulsions prepared using time-dependent HIU-treated MPs revealed that the emulsion activity index and emulsion stability index of HIU-treated MP were improved. Confocal laser scanning microscopy images indicated that small spherical droplets adsorbed with MPs were formed by HIU treatment and that dispersion stabilities were improved because the Turbiscan stability index of the HIU-treated group was lower than that of the control group. These findings could be used as supporting data for the utilizing porcine-derived MPs, which have been treated with HIU for appropriate time periods, as Pickering stabilizers.

Draft genome sequence of a Sphingomonas sp., an endosymbiotic bacterium isolated from an arctic lichen Umbilicaria sp.

Sphingomonas sp. strain PAMC 26617 has been isolated from an Arctic lichen Umbilicaria sp. on the Svalbard Islands. Here we present the draft genome sequence of this strain, which represents a valuable resource for understanding the symbiotic mechanisms between endosymbiotic bacteria and lichens surviving in extreme environments.

Genome sequence of Sphingomonas sp. strain PAMC 26621, an Arctic-lichen-associated bacterium isolated from a Cetraria sp.

The lichen-associated bacterial strain Sphingomonas sp. PAMC 26621 was isolated from an Arctic lichen Cetraria sp. on Svalbard Islands. Here we report the draft genome sequence of this strain, which could provide novel insights into the molecular principles of lichen-microbe interactions.

Preparation and evaluation of oleoyl-carboxymethy-chitosan (OCMCS) nanoparticles as oral protein carriers.

Oleoyl-carboxymethy chitosan (OCMCS) nanoparticles based on chitosan with different molecular weights (50, 170 and 820 kDa) were prepared by self-assembled method. The nanoparticles had spherical shape, positive surface charges and the mean diameters were 157.4, 274.1 and 396.7 nm, respectively. FITC-labeled OCMCS nanoparticles were internalized via the intestinal mucosa and observed in liver, spleen, intestine and heart following oral deliverance to carps (Cyprinus carpio). Extracellular products (ECPs) of Aeromonas hydrophila as microbial antigen was efficiently loaded to form OCMCS-ECPs nanoparticles and shown to be sustained release in PBS. Significantly higher (P < 0.05) antigen-specific antibodies were detected in serum after orally immunized with OCMCS-ECPs nanoparticles than that immunized with ECPs alone and non-immunized in control group in carps. These results implied that amphiphilic modified chitosan nanoparticles had great potential to be applied as carriers for the oral administration of protein drugs.

Reduction in fat uptake of doughnut by microparticulated wheat bran.

Wheat flour-microparticulated wheat bran (MWB) mixture and composites were prepared, and their potential as an oil repellent was evaluated in doughnuts. As MWB content increased, the oil-holding capacity decreased, and there were significant changes in water-holding capacity (p < 0.05). As MWB content increased, the fat content of doughnuts decreased. In addition, the wheat flour-MWB composite was more effective for preventing fat uptake than the wheat flour-MWB mixture. The hardness of the composite was higher than the mixture, although volume and weight decreased and surface colour became darker than that of the mixture. As the proportion of wheat bran in the doughnut formulation increased, the inner crust achieved a uniform cell size and cellular integrity was improved. Based on these data, wheat flour-MWB composites are appropriate for use in doughnut formulas with low fat uptake.

Novel QuEChERS-ultra-performance liquid chromatography-atmospheric-pressure chemical ionization tandem mass spectrometry method for the simultaneous determination of vitamin D and vitamin K in vitamin-fortified nanoemulsions.

Nanoemulsion is a new vehicle for food fortification. In this study, a simple and reliable method for the simultaneous analysis of vitamins D2, D3, K1, and K2 in vitamin-fortified nanoemulsions was developed using QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction and ultra-high performance liquid chromatography-atmospheric-pressure chemical ionization tandem mass spectrometry techniques. Response surface methodology was employed to optimize the extraction parameters. The method was validated for the vitamins in terms of LOD (0.03-0.25 µg/L), LOQ (0.10-0.77 µg/L), intra-day (≤4.50%), inter-day precisions (≤6.43%), and accuracy (98.5%-108.0%). The recoveries of the vitamin-fortified nanoemulsion and yogurt were in the ranges of 104.0%-109.2% and 73.3%-85.2%, respectively. The solvent consumption and analysis time were reduced by 5.6 and 3.3 folds, respectively, rendering it superior to the traditional extraction methods established by the Association of Official Analytical Chemists and the Ministry of Food and Drug Safety.

Combined Effects of Pressure Cooking and Enzyme Treatment to Enhance the Digestibility and Physicochemical Properties of Spreadable Liver Sausage.

This study aimed to determine the effect of enzyme, guar gum, and pressure processing on the digestibility and physicochemical properties of age-friendly liver sausages. Liver sausages were manufactured by adding proteolytic enzyme (Bromelain) and guar gum, and pressure-cooking (0.06 MPa), with the following treatments: control, without proteolytic enzyme; T1, proteolytic enzyme; T2, proteolytic enzyme and guar gum; T3, pressure-cooking; T4, proteolytic enzyme and pressure-cooking; T5, proteolytic enzyme, guar gum, and pressure-cooking. The pH was high in the enzyme- and pressure-processed groups. The pressure-processed groups had lower apparent viscosity than other cooking groups, and it decreased during enzyme treatment. Hardness was lower in the enzyme- and pressure-processed groups than in the control, and the T4 was the lowest. Digestibility was the highest in T4 at 82.58%, and there was no significant difference with that in T5. The general cooking group with enzyme and guar gum also showed higher digestibility than the control (77.50%). As a result of the sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the enzyme- and pressure-treated groups (T4, T5) were degraded more into low-molecular-weight peptides (≤37 kDa) than the control and other treatments. Viscoelasticity showed similar trends for viscous and elastic moduli. Similarly, combined pressure processing and enzymatic treatment decreased viscoelasticity, while guar gum increased elasticity but decreased viscosity. Therefore, the tenderized physical properties and improved digestibility by enzyme and pressurization treatment could be used to produce age-friendly spreadable liver sausages.

Physical and turbidimetric properties of cholecalciferol- and menaquinone-loaded lipid nanocarriers emulsified with polysorbate 80 and soy lecithin.

The present study aimed to investigate the physical and turbidimetric properties of cholecalciferol- and menaquinone-loaded lipid nanocarriers emulsified with different ratios of polysorbate 80 and soy lecithin. The lipid nanocarriers were subjected to three different heat treatments, LTLT (low temperature long time), HTST (high temperature short time), and autoclave treatments. Both cholecalciferol and menaquinone were successfully encapsulated in lipid nanocarriers and there was little loss of them during preparation. The droplet size of lipid nanocarriers emulsified with only polysorbate 80 increased and its PDI became larger than 0.3 after autoclave treatment. Moreover, 30.9% and 49.4% of cholecalciferol and menaquinone, respectively, were lost. In turbidimetric analysis, the destabilization by creaming formation in the upper layer of the lipid nanocarriers emulsified with a high polysorbate ratio was observed. However, the use of combination of both emulsifiers inhibited destabilization by flocculation as well as retained the cholecalciferol and menaquinone after all heat treatments.

Analysis of in vitro digestion using human gut microbiota in adult and elderly individuals.

In vitro human digestion models are widely used to determine the digestibility of bioactive substances and to perform drug delivery analyses. To develop the most accurate in vitro human digestion model reported to date, we simulated all digestion conditions, including pH and digestion time, with changes in the amount of digestive enzymes, motility, and proportion of human gut microbiota in adult and elderly individuals. Using this newly developed model, the digestibility of vitamin E emulsified by lard was found to be significantly different between adults and the elderly. Therefore, this model can accurately simulate oral, gastric, and intestinal (with gut microbiota effects) digestion of bioactive substances and can aid in analyzing drug delivery in adults and elderly individuals.