Resistive gas sensors for the detection of NH3gas based on 2D WS2, WSe2, MoS2, and MoSe2: a review.

Transition metal dichalcogenides (TMDs) with a two-dimensional (2D) structure and semiconducting features are highly favorable for the production of NH3gas sensors. Among the TMD family, WS2, WSe2, MoS2, and MoSe2exhibit high conductivity and a high surface area, along with high availability, reasons for which they are favored in gas-sensing studies. In this review, we have discussed the structure, synthesis, and NH3sensing characteristics of pristine, decorated, doped, and composite-based WS2, WSe2, MoS2, and MoSe2gas sensors. Both experimental and theoretical studies are considered. Furthermore, both room temperature and higher temperature gas sensors are discussed. We also emphasized the gas-sensing mechanism. Thus, this review provides a reference for researchers working in the field of 2D TMD gas sensors.

Room Temperature Chemiresistive Gas Sensors Based on 2D MXenes.

Owing to their large surface area, two-dimensional (2D) semiconducting nanomaterials have been extensively studied for gas-sensing applications in recent years. In particular, the possibility of operating at room temperature (RT) is desirable for 2D gas sensors because it significantly reduces the power consumption of the sensing device. Furthermore, RT gas sensors are among the first choices for the development of flexible and wearable devices. In this review, we focus on the 2D MXenes used for the realization of RT gas sensors. Hence, pristine, doped, decorated, and composites of MXenes with other semiconductors for gas sensing are discussed. Two-dimensional MXene nanomaterials are discussed, with greater emphasis on the sensing mechanism. MXenes with the ability to work at RT have great potential for practical applications such as flexible and/or wearable gas sensors.

Resistive-Based Gas Sensors Using Quantum Dots: A Review.

Quantum dots (QDs) are used progressively in sensing areas because of their special electrical properties due to their extremely small size. This paper discusses the gas sensing features of QD-based resistive sensors. Different types of pristine, doped, composite, and noble metal decorated QDs are discussed. In particular, the review focus primarily on the sensing mechanisms suggested for these gas sensors. QDs show a high sensing performance at generally low temperatures owing to their extremely small sizes, making them promising materials for the realization of reliable and high-output gas-sensing devices.

Effect of Ag Addition on the Gas-Sensing Properties of Nanostructured Resistive-Based Gas Sensors: An Overview.

Nanostructured semiconducting metal oxides (SMOs) are among the most popular sensing materials for integration into resistive-type gas sensors owing to their low costs and high sensing performances. SMOs can be decorated or doped with noble metals to further enhance their gas sensing properties. Ag is one of the cheapest noble metals, and it is extensively used in the decoration or doping of SMOs to boost the overall gas-sensing performances of SMOs. In this review, we discussed the impact of Ag addition on the gas-sensing properties of nanostructured resistive-based gas sensors. Ag-decorated or -doped SMOs often exhibit better responsivities/selectivities at low sensing temperatures and shorter response times than those of their pristine counterparts. Herein, the focus was on the detection mechanism of SMO-based gas sensors in the presence of Ag. This review can provide insights for research on SMO-based gas sensors.

Reduced Graphene Oxide (rGO)-Loaded Metal-Oxide Nanofiber Gas Sensors: An Overview.

Reduced graphene oxide (rGO) is a reduced form of graphene oxide used extensively in gas sensing applications. On the other hand, in its pristine form, graphene has shortages and is generally utilized in combination with other metal oxides to improve gas sensing capabilities. There are different ways of adding rGO to different metal oxides with various morphologies. This study focuses on rGO-loaded metal oxide nanofiber (NF) synthesized using an electrospinning method. Different amounts of rGO were added to the metal oxide precursors, and after electrospinning, the gas response is enhanced through different sensing mechanisms. This review paper discusses rGO-loaded metal oxide NFs gas sensors.

State-of-the-Art Research on Chemiresistive Gas Sensors in Korea: Emphasis on the Achievements of the Research Labs of Professors Hyoun Woo Kim and Sang Sub Kim.

This review presents the results of cutting-edge research on chemiresistive gas sensors in Korea with a focus on the research activities of the laboratories of Professors Sang Sub Kim and Hyoun Woo Kim. The advances in the synthesis techniques and various strategies to enhance the gas-sensing performances of metal-oxide-, sulfide-, and polymer-based nanomaterials are described. In particular, the gas-sensing characteristics of different types of sensors reported in recent years, including core-shell, self-heated, irradiated, flexible, Si-based, glass, and metal-organic framework sensors, have been reviewed. The most crucial achievements include the optimization of shell thickness in core-shell gas sensors, decrease in applied voltage in self-heated gas sensors to less than 5 V, optimization of irradiation dose to achieve the highest response to gases, and the design of selective and highly flexible gas sensors-based WS2 nanosheets. The underlying sensing mechanisms are discussed in detail. In summary, this review provides an overview of the chemiresistive gas-sensing research activities led by the corresponding authors of this manuscript.

Incorporation of Pt Nanoparticles on the Surface of TeO2-Branched Porous Si Nanowire Structures for Enhanced Room-Temperature Gas Sensing.

A new gas sensor working in room temperature, which is compatible with silicon fabrication technology is presented. Porous silicon nanowires (NWs) were synthesized by metal-assisted chemical etching method and then TeO2 NWs branches were attached to their stem by thermal evaporation of Te powders in the presence of air. Afterwards TeO2 branched porous Si NWs were functionalized by Pt via sputtering followed by low temperature thermal annealing. Scanning electron microscopy, transmission electron microscopy and energy-dispersive X-ray spectroscopy collectively confirmed successful formation of TeO2 branched porous Si NWs functionalized by Pt nanoparticles. Their gas sensing properties in the presence of CO, C6H6 and C7H8 were tested at room temperature, for Si wafer, pristine porous Si NWs, pristine TeO2 branched porous Si NWs, and Pt functionalized TeO2 branched porous Si NWs sensors. Pt functionalized TeO2 branched porous Si NWs have higher responses to all tested gases than the other sensors. The origin of high response is discussed in detail. This new room temperature gas sensor can open a new aperture for development of gas sensors with minimum energy consumption which are compatible with silicon fabrication technology.

Enhanced Hydrogen Detection in ppb-Level by Electrospun SnO2-Loaded ZnO Nanofibers.

High-performance hydrogen sensors are important in many industries to effectively address safety concerns related to the production, delivering, storage and use of H2 gas. Herein, we present a highly sensitive hydrogen gas sensor based on SnO2-loaded ZnO nanofibers (NFs). The xSnO2-loaded (x = 0.05, 0.1 and 0.15) ZnO NFs were fabricated using an electrospinning technique followed by calcination at high temperature. Microscopic analyses demonstrated the formation of NFs with expected morphology and chemical composition. Hydrogen sensing studies were performed at various temperatures and the optimal working temperature was selected as 300 °C. The optimal gas sensor (0.1 SnO2 loaded ZnO NFs) not only showed a high response to 50 ppb hydrogen gas, but also showed an excellent selectivity to hydrogen gas. The excellent performance of the gas sensor to hydrogen gas was mainly related to the formation of SnO2-ZnO heterojunctions and the metallization effect of ZnO.

Gas Sensing Properties of Mg-Incorporated Metal-Organic Frameworks.

The gas sensing properties of two novel series of Mg-incorporated metal-organic frameworks (MOFs), termed Mg-MOFs-I and -II, were assessed. The synthesized iso-reticular type Mg-MOFs exhibited good crystallinity, high thermal stability, needle-shape morphology and high surface area (up to 2900 m2·g-1), which are promising for gas sensing applications. Gas-sensing studies of gas sensors fabricated from Mg-MOFs-II revealed better sensing performance, in terms of the sensor dynamics and sensor response, at an optimal operating temperature of 200 °C. The MOF gas sensor with a larger pore size and volume showed shorter response and recovery times, demonstrating the importance of the pore size and volume on the kinetic properties of MOF-based gas sensors. The gas-sensing results obtained in this study highlight the potential of Mg-MOFs gas sensors for the practical monitoring of toxic gases in a range of environments.

ppb-Level Selective Hydrogen Gas Detection of Pd-Functionalized In2O3-Loaded ZnO Nanofiber Gas Sensors.

Pd nanoparticle-functionalized, xIn2O3 (x = 0.05, 0.1, and 0.15)-loaded ZnO nanofibers were synthesized by an electrospinning and ultraviolet (UV) irradiation method and assessed for their hydrogen gas sensing properties. Morphological and chemical analyses revealed the desired morphology and chemical composition of the synthesized nanofibers. The optimal gas sensor namely Pd-functionalized, 0.1In2O3-loaded ZnO nanofibers showed a very strong response to 172-50 ppb hydrogen gas at 350 °C, which is regarded as the optimal sensing temperature. Furthermore, the gas sensors showed excellent selectivity to hydrogen gas due to the much lower response to CO and NO2 gases. The enhanced gas response was attributed to the excellent catalytic activity of Pd to hydrogen gas, and the formation of Pd/ZnO and In2O3/ZnO heterojunctions, ZnO-ZnO homojunction, as well as the formation of PdHx. Overall, highly sensitive and selective hydrogen gas sensors can be produced based on a simple methodology using a synergistic effect from Pd functionalization and In2O3 loading in ZnO nanofibers.

Sub-ppm Formaldehyde Detection by n-n TiO2@SnO2 Nanocomposites.

Formaldehyde (HCHO) is an important indicator of indoor air quality and one of the markers for detecting lung cancer. Both medical and air quality applications require the detection of formaldehyde in the sub-ppm range. Nanocomposites SnO2/TiO2 are promising candidates for HCHO detection, both in dark conditions and under UV illumination. Nanocomposites TiO2@SnO2 were synthesized by ALD method using nanocrystalline SnO2 powder as a substrate for TiO2 layer growth. The microstructure and composition of the samples were characterized by ICP-MS, TEM, XRD and Raman spectroscopy methods. The active surface sites were investigated using FTIR and TPR-H2 methods. The mechanism of formaldehyde oxidation on the surface of semiconductor oxides was studied by in situ DRIFTS method. The sensor properties of nanocrystalline SnO2 and TiO2@SnO2 nanocomposites toward formaldehyde (0.06-0.6 ppm) were studied by in situ electrical conductivity measurements in dark conditions and under periodic UV illumination at 50-300 °C. Nanocomposites TiO2@SnO2 exhibit a higher sensor signal than SnO2 and a decrease in the optimal measurement temperature by 50 °C. This result is explained based on the model considering the formation of n-n heterocontact at the SnO2/TiO2 interface. UV illumination leads to a decrease in sensor response compared with that obtained in dark conditions because of the photodesorption of oxygen involved in the oxidation of formaldehyde.

Porous Si nanowires for highly selective room-temperature NO2 gas sensing.

We report the room-temperature sensing characteristics of Si nanowires (NWs) fabricated from p-Si wafers by a metal-assisted chemical etching method, which is a facile and low-cost method. X-ray diffraction was used to the the study crystallinity and phase formation of Si NWs, and product morphology was examined using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). After confirmation of Si NW formation via the SEM and TEM micrographs, sensing tests were carried out at room temperature, and it was found that the Si NW sensor prepared from Si wafers with a resistivity of 0.001-0.003 Ω.cm had the highest response to NO2 gas (Rg/Ra = 1.86 for 50 ppm NO2), with a fast response (15 s) and recovery (30 s) time. Furthermore, the sensor responses to SO2, toluene, benzene, H2, and ethanol were nearly negligible, demonstrating the excellent selectivity to NO2 gas. The gas-sensing mechanism is discussed in detail. The present sensor can operate at room temperature, and is compatible with the microelectronic fabrication process, demonstrating its promise for next-generation Si-based electronics fused with functional chemical sensors.

Graphene-loaded tin oxide nanofibers: optimization and sensing performance.

We investigated the gas sensing characteristics of graphene nanosheet (NS)-loaded SnO2 nanofibers (NFs) that were synthesized by a low-cost facile electrospinning process. The sensing performance was characterized as a function of the graphene content with various gases such as C6H6, C7H8, CO, CO2, and H2S. The loading of graphene NSs significantly improved the gas sensing performances of SnO2 NFs. The optimal amount of graphene NSs was found to be 0.5 wt%. We proposed a sensing mechanism for the enhanced sensing performance based on the chemical sensitization of graphene NSs and the charge transfer through the heterointerfaces between graphene NSs and SnO2 nanograins. The results show that graphene NS-loaded SnO2 NFs are a promising sensing material system that can detect hazardous gaseous species.

Improvement of Toluene-Sensing Performance of SnO2 Nanofibers by Pt Functionalization.

Functionalization of metal nanoparticles (NPs) on oxide materials is a commonly employed technique for enhancing the sensitivity and selectivity of materials for gas sensing applications. In this study, we functionalized electrospinning-synthesized SnO2 nanofibers (NFs) with various amounts of Pt NPs to enhance the toluene-sensing properties. In particular, Pt NPs were prepared by deposition of Pt films by sputtering and subsequent heat treatment. Electronic and chemical sensitizations by the Pt NPs were responsible for the improved toluene sensitivity. The best sensing properties were achieved at an optimized amount of Pt NPs, showing a volcano shape in relation to the amount of Pt NPs. The method used in this study is useful for the development of toluene-sensitive and -selective chemiresistive NF-based gas sensors.

O2 sensing dynamics of BiFeO3 nanofibers: effect of minor carrier compensation.

In this paper we investigate O(2) sensing dynamics in BiFeO(3) (BFO) nanofibers at various concentrations and temperatures, by using a combined experiment and computer simulation approach. Samples of pristine BFO, Ni-doped BFO, and Pb-doped BFO nanofibers were prepared. By incorporating Ni and Pb, additional acceptor states are introduced in BFO. Density functional theory calculations show that Ni prefers to substitute Fe site while Pb substitutes Bi site, resulting in a new deep donor originating from Ni interstitial defects, along with oxygen vacancies (V(o)). We find that both the sensing response and recovery time are shorter in samples made of pristine BFO nanofibers than in Ni- and Pb-doped nanofiber samples. We interpret the observed sensing dynamics through charge transport theory of the major (acceptors) and minor (donors) carriers, and found that the minor carrier compensation plays a significant role in determining the response and recovery time of the sensor device. This minor carrier compensation charge transport mechanism will provide new insights into more robust sensor development strategies, and into the research of ion-electron coupling in chemical dynamics of semiconductors.

Effect of the wall thickness on the gas-sensing properties of ZnO hollow fibers.

ZnO hollow fibers (HFs) with a range of wall thicknesses were synthesized by electrospinning and atomic layer deposition. The effects of the wall thickness of the HFs on their sensing properties were examined using CO as a representative reducing gas. The thin-walled HFs showed improved sensor responses to CO compared to thick-walled HFs. Most importantly, despite the polycrystalline nature of HFs, their sensing abilities were determined mainly by the wall thickness, not by the size of the nanograins or crystalline quality. In particular, the resistance modulation was attributed mainly to radial suppression/broadening of the underlying conducting channel during adsorption/desorption of gas species on both the inner and outer surface.

Mechanism and prominent enhancement of sensing ability to reducing gases in p/n core-shell nanofiber.

We have devised a sensor system comprising p-CuO/n-ZnO core-shell nanofibers (CS nanofibers) for the detection of reducing gases with a very low concentration. The CS nanofibers were prepared by a two-step process as follows: (1) synthesis of core CuO nanofibers by electrospinning, and (2) subsequent deposition of uniform ZnO shell layers by atomic layer deposition. We have estimated the sensing capabilities of CS nanofibers with respect to CO gas, revealing that the thickness of the shell layer needs to be optimized to obtain the best sensing properties. It is found that the p-CuO/n-ZnO CS structures are suitable for detecting reducing gases at extremely low concentrations. The associated sensing mechanism is proposed on the basis of the radial modulation of an electron-depleted region in the shell layer.

Advancing Dental Implant Design: A Comprehensive Study of Machining Parameters, Corrosion Behavior, and Microstructural Evaluation.

In this research, we investigate the impact of varying machining parameters [depth of cutting (mm) and spindle rotation speed (rpm)] on the microstructure and electrochemical behavior of Ti6Al4V-ELI dental implants. This comprehensive study employs an approach, leveraging potentiodynamic methods and electrochemical impedance spectroscopy, to analyze corrosion behavior in a phosphate-buffered saline solution. To further deepen our understanding of corrosion kinetics, we used an alternating current circuit model, based on a simple Randles equivalent circuit. This model elucidates the corrosion interface interactions of the Ti6Al4-V-ELI alloy implant within the PBS solution. In addition, our research delves into the microstructural implications of different machining parameters, utilizing scanning electron microscopy and X-ray diffraction (XRD) techniques to reveal significant phase changes. The changes in texture were examined qualitatively by comparing the intensities of the peaks of the XRD pattern. A detailed correlation analysis further links the machining parameters with the corrosion properties of dental implants, offering a comprehensive perspective rarely explored in the existing literature. The results obtained for the three samples showed that the corrosion resistance would be higher by increasing the machining depth and the spindle rotation and that the corrosion current would be lower. As a result, a lower corrosion rate was obtained. Finally, experimental results from electrochemical analyses are compared and discussed.

Phase-Engineered MoSe2/CeO2 Composites for Room-Temperature Gas Sensing with a Drastic Discrimination of NH3 and TEA Gases.

Detecting and distinguishing between hazardous gases with similar odors by using conventional sensor technology for safeguarding human health and ensuring food safety are significant challenges. Bulky, costly, and power-hungry devices, such as that used for gas chromatography-mass spectrometry (GC-MS), are widely employed for gas sensing. Using a single chemiresistive semiconductor or electric nose (e-nose) gas sensor to achieve this objective is difficult, mainly because of its selectivity issue. Thus, there is a need to develop new materials with tunable and versatile sensing characteristics. Phase engineering of two-dimensional materials to better utilize their physiochemical properties has attracted considerable attention. Here, we show that MoSe2 phase-transition/CeO2 composites can be effectively used to distinguish ammonia (NH3) and triethylamine (TEA) at room temperature. The phase transition of nanocomposite samples from semimetallic (1T) to semiconducting (2H) prepared at different synthesis temperatures is confirmed via X-ray photoelectron spectroscopy (XPS). A composite sensor in which the 2H phase of MoSe2 is predominant lacks discrimination capability and is less responsive to NH3 and TEA. An MoSe2/CeO2 composite sensor with a higher 1T phase content exhibits high selectivity for NH3, whereas one with a higher 2H phase content (2H > 1T) shows more selective behavior toward TEA. For example, for 50% relative humidity, the MoSe2/CeO2 sensor's signal changes from the baseline by 45% and 58% for 1 ppm of NH3 and TEA, respectively, indicating a low limit of detection (LOD) of 70 and 160 ppb, respectively. The composites' superior sensing characteristics are mainly attributed to their large specific surface area, their numerous active sites, presence of defects, and the n-n type heterojunction between MoSe2 and CeO2. The sensing mechanism is elucidated using Raman spectroscopy, XPS, and GC-MS results. Their phase-transition characteristics render MoSe2/CeO2 sensors promising for use in distributed, low-cost, and room-temperature sensor networks, and they offer new opportunities for the development of integrated advanced smart sensing technologies for environmental and healthcare.

2D nanomaterials for realization of flexible and wearable gas sensors: A review.

Gas sensors are extensively employed for monitoring and detection of hazardous gases and vapors. Many of them are produced on rigid substrates, but flexible and wearable gas sensors are needed for intriguing usage including the internet of things (IoT) and medical devices. The materials with the greatest potential for the fabrication of flexible and wearable gas sensing devices are two-dimensional (2D) semiconducting nanomaterials, which consist of graphene and its substitutes, transition metal dichalcogenides, and MXenes. These types of materials have good mechanical flexibility, high charge carrier mobility, a large area of surface, an abundance of defects and dangling bonds, and, in certain instances adequate transparency and ease of synthesis. In this review, we have addressed the different 2D nonmaterial properties for gas sensing in the context of fabrication of flexible/wearable gas sensors. We have discussed the sensing performance of flexible/wearable gas sensors in various forms such as pristine, composite and noble metal decorated. We believe that content of this review paper is greatly useful for the researchers working in the research area of fabrication of flexible/wearable gas sensors.