Orbital-resolved visualization of single-molecule photocurrent channels.

Given its central role in utilizing light energy, photoinduced electron transfer (PET) from an excited molecule has been widely studied1-6. However, even though microscopic photocurrent measurement methods7-11 have made it possible to correlate the efficiency of the process with local features, spatial resolution has been insufficient to resolve it at the molecular level. Recent work has, however, shown that single molecules can be efficiently excited and probed when combining a scanning tunnelling microscope (STM) with localized plasmon fields driven by a tunable laser12,13. Here we use that approach to directly visualize with atomic-scale resolution the photocurrent channels through the molecular orbitals of a single free-base phthalocyanine (FBPc) molecule, by detecting electrons from its first excited state tunnelling through the STM tip. We find that the direction and the spatial distribution of the photocurrent depend sensitively on the bias voltage, and detect counter-flowing photocurrent channels even at a voltage where the averaged photocurrent is near zero. Moreover, we see evidence of competition between PET and photoluminescence12, and find that we can control whether the excited molecule primarily relaxes through PET or photoluminescence by positioning the STM tip with three-dimensional, atomic precision. These observations suggest that specific photocurrent channels can be promoted or suppressed by tuning the coupling to excited-state molecular orbitals, and thus provide new perspectives for improving energy-conversion efficiencies by atomic-scale electronic and geometric engineering of molecular interfaces.

Selective triplet exciton formation in a single molecule.

The formation of excitons in organic molecules by charge injection is an essential process in organic light-emitting diodes (OLEDs)1-7. According to a simple model based on spin statistics, the injected charges form spin-singlet (S1) excitons and spin-triplet (T1) excitons in a 1:3 ratio2-4. After the first report of a highly efficient OLED2 based on phosphorescence, which is produced by the decay of T1 excitons, more effective use of these excitons has been the primary strategy for increasing the energy efficiency of OLEDs. Another route to improving OLED energy efficiency is reduction of the operating voltage2-6. Because T1 excitons have lower energy than S1 excitons (owing to the exchange interaction), use of the energy difference could-in principle-enable exclusive production of T1 excitons at low OLED operating voltages. However, a way to achieve such selective and direct formation of these excitons has not yet been established. Here we report a single-molecule investigation of electroluminescence using a scanning tunnelling microscope8-20 and demonstrate a simple method of selective formation of T1 excitons that utilizes a charged molecule. A 3,4,9,10-perylenetetracarboxylicdianhydride (PTCDA) molecule21-25 adsorbed on a three-monolayer NaCl film atop Ag(111) shows both phosphorescence and fluorescence signals at high applied voltage. In contrast, only phosphorescence occurs at low applied voltage, indicating selective formation of T1 excitons without creating their S1 counterparts. The bias voltage dependence of the phosphorescence, combined with differential conductance measurements, reveals that spin-selective electron removal from a negatively charged PTCDA molecule is the dominant formation mechanism of T1 excitons in this system, which can be explained by considering the exchange interaction in the charged molecule. Our findings show that the electron transport process accompanying exciton formation can be controlled by manipulating an electron spin inside a molecule. We anticipate that designing a device taking into account the exchange interaction could realize an OLED with a lower operating voltage.

Bridging Electrochemistry and Ultrahigh Vacuum: "Unburying" the Electrode-Electrolyte Interface.

ConspectusElectrochemistry has a central role in addressing the societal issues of our time, including the United Nations' Sustainable Development Goals (SDGs) and beyond. At a more basic level, however, elucidating the nature of electrode-electrolyte interfaces is an ongoing challenge due to many reasons, but one obvious reason is the fact that the electrode-electrolyte interface is buried by a thick liquid electrolyte layer. This fact would seem to preclude, by default, the use of many traditional characterization techniques in ultrahigh vacuum surface science due to their incompatibility with liquids. However, combined UHV-EC (ultrahigh vacuum-electrochemistry) approaches are an active area of research and provide a means of bridging the liquid environment of electrochemistry to UHV-based techniques. In short, UHV-EC approaches are able to remove the bulk electrolyte layer by performing electrochemistry in the liquid environment of electrochemistry followed by sample removal (referred to as emersion), evacuation, and then transfer into vacuum for analysis.Through this Account, we highlight our group's activities using UHV-EC to bridge electrochemistry with UHV-based X-ray and ultraviolet photoelectron spectroscopy (XPS/UPS) and scanning tunneling microscopy (STM). We provide a background and overview of the UHV-EC setup, and through illustrative examples, we convey what sorts of insights and information can be obtained. One notable advance is the use of ferrocene-terminated self-assembled monolayers as a spectroscopic molecular probe, allowing the electrochemical response to be correlated with the potential-dependent electronic and chemical state of the electrode-monolayer-electrolyte interfacial region. With XPS/UPS, we have been able to probe changes in the oxidation state, valence structure, and also the so-called potential drop across the interfacial region. In related work, we have also spectroscopically probed changes in the surface composition and screening of the surface charge of oxygen-terminated boron-doped diamond electrodes emersed from high-pH solutions. Finally, we will give readers a glimpse into our recent progress regarding real-space visualizations of electrodes following electrochemistry and emersion using UHV-based STM. We begin by demonstrating the ability to visualize large-scale morphology changes, including electrochemically induced graphite exfoliation and the surface reconstruction of Au surfaces. Taking this further, we show that in certain instances atomically resolved specifically adsorbed anions on metal electrodes can be imaged. In all, we anticipate that this Account will stimulate readers to advance UHV-EC approaches further, as there is a need to improve our understanding concerning the guidelines that determine applicable electrochemical systems and how to exploit promising extensions to other UHV methods.

Steering the Reaction Pathways of Terminal Alkynes by Introducing Oxygen Species: From C-C Coupling to C-H Activation.

Selective regulation of chemical reactions is crucial in chemistry. Oxygen, as a key reagent in ubiquitous oxidative chemistry, exhibits great potential in regulating molecular assemblies, and more importantly, chemical reactions in molecular systems supported by metal surfaces. However, the unique catalytic performance and reaction mechanisms of oxygen species remain elusive, which are essential for understanding reaction selection and regulation. In this study, by a combination of scanning tunneling microscopy (STM) imaging/manipulations and density functional theory (DFT) calculations, we showed that the on-surface reaction pathways of terminal alkynes could be steered from C-C coupling to C-H activation with high selectivity by introducing O2 into the molecular system. The catalytic performance and reaction mechanisms of oxygen species were explored in the C-H activation processes, and both molecular O2 and atomic O could efficiently steer the reaction pathways. These results would provide a fundamental understanding of interfacial catalytic reaction processes.

Atomic-Scale Photon Mapping Revealing Spin-Current Relaxation.

A nanoscopic understanding of spin-current dynamics is crucial for controlling the spin transport in materials. However, gaining access to spin-current dynamics at an atomic scale is challenging. Therefore, we developed spin-polarized scanning tunneling luminescence spectroscopy (SP STLS) to visualize the spin relaxation strength depending on spin injection positions. Atomically resolved SP STLS mapping of gallium arsenide demonstrated a stronger spin relaxation in gallium atomic rows. Hence, SP STLS paves the way for visualizing spin current with single-atom precision.

Dissociation of Single O2 Molecules on Ag(110) by Electrons, Holes, and Localized Surface Plasmons.

A detailed understanding of the dissociation of O2 molecules on metal surfaces induced by various excitation sources, electrons/holes, light, and localized surface plasmons, is crucial not only for controlling the reactivity of oxidation reactions but also for developing various oxidation catalysts. The necessity of mechanistic studies at the single-molecule level is increasingly important for understanding interfacial interactions between O2 molecules and metal surfaces and to improve the reaction efficiency. We review single-molecule studies of O2 dissociation on Ag(110) induced by various excitation sources using a scanning tunneling microscope (STM). The comprehensive studies based on the STM and density functional theory calculations provide fundamental insights into the excitation pathway for the dissociation reaction.

Excited States of Metal-Adsorbed Dimethyl Disulfide: A TDDFT Study with Cluster Model.

The optical near field refers to a localized light field near a surface that can induce photochemical phenomena such as dipole-forbidden transitions. Recently, the photodissociation of the S-S bond of dimethyl disulfide (DMDS) was investigated using a scanning tunneling microscope with far- and near-field light. This reaction is thought to be initiated by the lowest-energy highest occupied molecular orbital (HOMO) to lowest unoccupied molecular orbital (LUMO) transition of the DMDS molecule under far-field light. In near-field light, photodissociation proceeds at lower photon energies than in far-field light. To gain insight into the underlying mechanism, we theoretically investigated the excited states of DMDS adsorbed on Cu and Ag surfaces modeled by a tetrahedral 20-atom cluster. The frontier orbitals of the molecule were delocalized by the interaction with the metal, resulting in narrowing of the HOMO-LUMO gap energy. The excited-state distribution was analyzed using the Mulliken population analysis, decomposing molecular orbitals into metal and DMDS fragments. The excited states of the intra-DMDS transitions were found over a wider energy range, but at low energies, their oscillator strengths were negligible, which is consistent with the experimental results. Sparse modeling analysis showed that typical electronic transitions differed between the higher and lower excited states. If these low-lying excited states are efficiently excited by near-field light with different selection rules, the S-S bond dissociation reaction can proceed.

Real-space investigation of energy transfer in heterogeneous molecular dimers.

Given its central role in photosynthesis and artificial energy-harvesting devices, energy transfer has been widely studied using optical spectroscopy to monitor excitation dynamics and probe the molecular-level control of energy transfer between coupled molecules. However, the spatial resolution of conventional optical spectroscopy is limited to a few hundred nanometres and thus cannot reveal the nanoscale spatial features associated with such processes. In contrast, scanning tunnelling luminescence spectroscopy has revealed the energy dynamics associated with phenomena ranging from single-molecule electroluminescence, absorption of localized plasmons and quantum interference effects to energy delocalization and intervalley electron scattering with submolecular spatial resolution in real space. Here we apply this technique to individual molecular dimers that comprise a magnesium phthalocyanine and a free-base phthalocyanine (MgPc and H2Pc) and find that locally exciting MgPc with the tunnelling current of the scanning tunnelling microscope generates a luminescence signal from a nearby H2Pc molecule as a result of resonance energy transfer from the former to the latter. A reciprocating resonance energy transfer is observed when exciting the second singlet state (S2) of H2Pc, which results in energy transfer to the first singlet state (S1) of MgPc and final funnelling to the S1 state of H2Pc. We also show that tautomerization of H2Pc changes the energy transfer characteristics within the dimer system, which essentially makes H2Pc a single-molecule energy transfer valve device that manifests itself by blinking resonance energy transfer behaviour.

Anti-Kasha emissions of single molecules in a plasmonic nanocavity.

Kasha's rule generally holds true for solid-state molecular systems, where the rates of internal conversion and vibrational relaxation are sufficiently higher than the luminescence rate. In contrast, in systems where plasmons and matter interact strongly, the luminescence rate is significantly enhanced, leading to the emergence of luminescence that does not obey Kasha's rule. In this work, we investigate the anti-Kasha emissions of single molecules, free-base and magnesium naphthalocyanine (H2Nc and MgNc), in a plasmonic nanocavity formed between the tip of a scanning tunneling microscope (STM) and metal substrate. A narrow-line tunable laser was employed to precisely reveal the excited-state levels of a single molecule located under the tip and to selectively excite it into a specific excited state, followed by obtaining a STM-photoluminescence (STM-PL) spectrum to reveal the energy relaxation from the state. The excitation to higher-lying states of H2Nc caused various changes in the emission spectrum, such as broadening and the appearance of new peaks, implying the breakdown of Kasha's rule. These observations indicate emissions from the vibrationally excited states in the first singlet excited state (S1) and second singlet excited state (S2), as well as internal conversion from S2 to S1. Moreover, we obtained direct evidence of electronic and vibronic transitions from the vibrationally excited states, from the STM-PL measurements of MgNc. The results obtained herein shed light on the energy dynamics of molecular systems under a plasmonic field and highlight the possibility of obtaining various energy-converting functions using anti-Kasha processes.

Monatomic Iodine Dielectric Layer for Multimodal Optical Spectroscopy of Dye Molecules on Metal Surfaces.

Fluorescence and Raman scattering spectroscopies have been used in various research fields such as chemistry, electrochemistry, and biochemistry because they can easily obtain detailed information about molecules at interfaces with visible light. In particular, multimodal fluorescence and Raman scattering spectroscopy have recently attracted significant attention, which enables us to distinguish chemical species and their electronic states that are important for expressing various functions. However, a special strategy is required to perform simultaneous measurements because the cross sections of fluorescence and Raman scattering differ by as much as ∼1014. In this study, we propose a method for the simultaneous measurement of dye molecules on a metal surface using a monatomic layer of iodine as the dielectric layer. The method is based on adequately quenching the photoexcited state of the molecules near the metal surface to weaken the fluorescence intensity and using the resonance effect to increase the Raman signal. We have validated this concept by experiments with insulating layers of different thicknesses and dye molecules of different chemical structures. The proposed multimodal strategy paves the way for various applications such as catalytic chemistry and electrochemistry, where the adsorption structure and electronic states of molecular species near the metal surface determine functionalities.

Chemical Identification and Bond Control of π-Skeletons in a Coupling Reaction.

Highly unsaturated π-rich carbon skeletons afford versatile tuning of structural and optoelectronic properties of low-dimensional carbon nanostructures. However, methods allowing more precise chemical identification and controllable integration of target sp-/sp2-carbon skeletons during synthesis are required. Here, using the coupling of terminal alkynes as a model system, we demonstrate a methodology to visualize and identify the generated π-skeletons at the single-chemical-bond level on the surface, thus enabling further precise bond control. The characteristic electronic features together with localized vibrational modes of the carbon skeletons are resolved in real space by a combination of scanning tunneling microscopy/spectroscopy (STM/STS) and tip-enhanced Raman spectroscopy (TERS). Our approach allows single-chemical-bond understanding of unsaturated carbon skeletons, which is crucial for generating low-dimensional carbon nanostructures and nanomaterials with atomic precision.

Boron position-dependent surface reconstruction and electronic states of boron-doped diamond(111) surfaces: an ab initio study.

Boron-doped diamond (BDD) has attracted much attention in semi-/superconductor physics and electrochemistry, where the surface structures and electronic states play crucial roles. Herein, we systematically examine the structural and electronic properties of the unterminated and H-terminated diamond(111) surfaces by using density functional theory calculations, and the effect of the boron position on them. The surface energy increases compared to that of the undoped case when the boron is located at a deeper position in the diamond bulk, which indicates that boron near the surface can facilitate the surface stability of the BDD in addition to the H-termination. Moreover, the surface energy and projected density of state analyses suggest that the boron can enhance the graphitization of the pristine (ideal) unterminated (111) surface thanks to the alternative sp2-sp3 arrangement on that surface. Finally, we found that surface electronic states depend on the boron's position, i.e., the Fermi energy (EF) is located around the mid-gap position when the boron lies near the surface, instead of showing a p-type semiconductor behavior where the EF lies closer to the valence band maximum.

Centimeter-Scale and Highly Crystalline Two-Dimensional Alcohol: Evidence for Graphenol (C6OH).

We report a chemical route to synthesize centimeter-scale stoichiometric "graphenol (C6OH1)", a 2D crystalline alcohol, via vapor phase hydroxylation of epitaxial graphene on Cu(111). Atomic resolution scanning tunneling microscopy revealed this highly-ordered configuration of graphenol and low energy electron diffraction studies on a large-area single crystal graphene film demonstrated the feasibility of the same superstructure being achieved at the centimeter length scale. Periodic density functional theory (DFT) calculations about the formation of C6(OH)1 and its electronic structure are also reported.

Unusual Electrochemical Properties of Low-Doped Boron-Doped Diamond Electrodes Containing sp2 Carbon.

Unexpected phenomena displayed by low-boron-doped diamond (BDD) electrodes are disclosed in the present work. Generally, the presence of sp2 nondiamond carbon impurities in BDD electrodes causes undesirable electrochemical properties, such as a reduced potential window and increased background current, etc. However, we found that the potential window and redox reaction in normally doped (1%) BDD and low-doped (0.1%) BDD exhibited opposite tendencies depending on the extent of sp2 carbon. Moreover, we found that contrary to the usual expectations, low-doped BDD containing sp2 carbon hinders electron transfer, whereas in line with expectations, normally doped BDD containing sp2 exhibits enhanced electron transfer. Surface analyses by X-ray/ultraviolet photoelectron spectroscopy (XPS/UPS) and electrochemical methods are utilized to explain these unusual phenomena. This work indicates that the electrochemical properties of low-doped BDD containing sp2 might be due partially to the high level of surface oxygen, the large work function, the low carrier density, and the existence of different types of sp2 carbon.

Many-Body State Description of Single-Molecule Electroluminescence Driven by a Scanning Tunneling Microscope.

Electron transport and optical properties of a single molecule in contact with conductive materials have attracted considerable attention because of their scientific importance and potential applications. With the recent progress in experimental techniques, especially by virtue of scanning tunneling microscope (STM)-induced light emission, where the tunneling current of the STM is used as an atomic-scale source for induction of light emission from a single molecule, it has become possible to investigate single-molecule properties at subnanometer spatial resolution. Despite extensive experimental studies, the microscopic mechanism of electronic excitation of a single molecule in STM-induced light emission has yet to be clarified. Here we present a formulation of single-molecule electroluminescence driven by electron transfer between a molecule and metal electrodes based on a many-body state representation of the molecule. The effects of intramolecular Coulomb interaction on conductance and luminescence spectra are investigated using the nonequilibrium Hubbard Green's function technique combined with first-principles calculations. We compare simulation results with experimental data and find that the intramolecular Coulomb interaction is crucial for reproducing recent experiments for a single phthalocyanine molecule. The developed theory provides a unified description of the electron transport and optical properties of a single molecule in contact with metal electrodes driven out of equilibrium, and thereby, it contributes to a microscopic understanding of optoelectronic conversion in single molecules on solid surfaces and in nanometer-scale junctions.

Single-Molecule Study of a Plasmon-Induced Reaction for a Strongly Chemisorbed Molecule.

Chemical reactions induced by plasmons achieve effective solar-to-chemical energy conversion. However, the mechanism of these reactions, which generate a strong electric field, hot carriers, and heat through the excitation and decay processes, is still controversial. In addition, it is not fully understood which factor governs the mechanism. To obtain mechanistic knowledge, we investigated the plasmon-induced dissociation of a single-molecule strongly chemisorbed on a metal surface, two O2 species chemisorbed on Ag(110) with different orientations and electronic structures, using a scanning tunneling microscope (STM) combined with light irradiation at 5 K. A combination of quantitative analysis by the STM and density functional theory calculations revealed that the hot carriers are transferred to the antibonding (π*) orbitals of O2 strongly hybridized with the metal states and that the dominant pathway and reaction yield are determined by the electronic structures formed by the molecule-metal chemical interaction.

In Situ Spectroscopic Study on the Surface Hydroxylation of Diamond Electrodes.

Carbon-based materials are regarded as an environmentally benign alternative to the conventional metal electrode used in electrochemistry from the viewpoint of sustainable chemistry. Among various carbon electrode materials, boron-doped diamond (BDD) exhibits superior electrochemical properties. However, it is still uncertain how surface chemical species of BDD influence the electrochemical performance, because of the difficulty in characterizing the surface species. Here, we have developed in situ spectroscopic measurement systems on BDD electrodes, i.e., in situ attenuated total reflection infrared spectroscopy (ATR-IR) and electrochemical X-ray photoelectron spectroscopy (EC-XPS). ATR-IR studies at a controlled electrode potential confirmed selective surface hydroxylation. EC-XPS studies confirmed deprotonation of C-OH groups at the BDD/electrolyte interface. These findings should be important not only for better understanding of BDD's fundamentals but also for a variety of applications.

Scanning probe microscopy for real-space observations of local chemical reactions induced by a localized surface plasmon.

Localised surface plasmon (LSP) resonance has attracted considerable attention in recent years as an efficient driving force for chemical reactions. The chemical reactions induced by LSP are classified into two types, namely, redox reactions based on plasmon-induced charge separation (PICS) and chemical reactions induced by the direct interaction between LSP and molecules (plasmon-induced chemical reactions). Although both types of reactions have been extensively studied, the mechanisms of PICS and plasmon-induced chemical reactions remain unexplained and controversial because conventional macroscopic methods can hardly grasp the local chemical reactions induced by LSP. In order to obtain mechanistic insights, nanoscale observations and investigations are necessary. Scanning probe microscopy (SPM) is a powerful experimental tool to investigate not only the surface morphology but also the physical and chemical properties of samples at a high spatial resolution. In this perspective review, we first explain SPM combined with optical excitation, and then, review the recent studies using SPM techniques for real-space observations of the chemical reactions induced by LSP.

Characteristics of sulfur atoms adsorbed on Ag(100), Ag(110), and Ag(111) as probed with scanning tunneling microscopy: experiment and theory.

In this paper, we report that S atoms on Ag(100) and Ag(110) exhibit a distinctive range of appearances in scanning tunneling microscopy (STM) images, depending on the sample bias voltage, VS. Progressing from negative to positive VS, the atomic shape can be described as a round protrusion surrounded by a dark halo (sombrero) in which the central protrusion shrinks, leaving only a round depression. This progression resembles that reported previously for S atoms on Cu(100). We test whether DFT can reproduce these shapes and the transition between them, using a modified version of the Lang-Tersoff-Hamann method to simulate STM images. The sombrero shape is easily reproduced, but the sombrero-depression transition appears only for relatively low tunneling current and correspondingly realistic tip-sample separation, dT, of 0.5-0.8 nm. Achieving these conditions in the calculations requires sufficiently large separation (vacuum) between slabs, together with high energy cutoff, to ensure appropriate exponential decay of electron density into vacuum. From DFT, we also predict that an analogous transition is not expected for S atoms on Ag(111) surfaces. The results are explained in terms of the through-surface conductance, which defines the background level in STM, and through-adsorbate conductance, which defines the apparent height at the point directly above the adsorbate. With increasing VS, for Ag(100) and Ag(110), we show that through-surface conductance increases much more rapidly than through-adsorbate conductance, so the apparent adsorbate height drops below background. In contrast, for Ag(111) the two contributions increase at more comparable rates, so the adsorbate level always remains above background and no transition is seen.

Regional thickness of facial skin and superficial fat: Application to the minimally invasive procedures.

Various recently introduced minimally invasive treatment modalities are now widely used for enhancing the aging face. In a special, filler is used to increase the volume of tissue, and so understanding the regional thickness and distribution of the facial superficial fat is essential for optimizing minimally invasive procedures. The aim of this study was to establish the overall facial skin and superficial fat thicknesses using a three-dimensional (3D) scanning system. From 53 adult Korean and Thai embalmed adult cadavers, the undissected and serially-dissected facial specimens were scanned and reconstructed. The facial skin and superficial fat thicknesses on seven facial regions were calculated from the superimposed images. The facial skin tended to become thicker in the order of the radix and dorsum, and the temple, supraorbital, forehead, perioral, cheek, and infraorbital areas. The skin was thinnest at radix and dorsum (1.51 ± 0.55 mm), and thickest in infraorbital region (1.97 ± 0.84 mm). The facial superficial fat thickness tended to increase in the order of the radix and dorsum, supraorbital, forehead, temple, cheek, infraorbital, and perioral regions. The superficial fat was thinnest at the radix and dorsum (1.61 ± 1.07 mm), and thickest in the perioral region (5.14 ± 3.31 mm). The facial superficial fat thickness tended to increase in the order of the radix and dorsum, supraorbital, forehead, temple, cheek, infraorbital, and perioral regions. The present findings indicate that 3D scanning system can yield crucial anatomical information about depths of the facial skin and superficial fat layers for utilization in various clinical procedures. Clin. Anat. 32:1008-1018, 2019. © 2019 Wiley Periodicals, Inc.