Cryogelation of chitosan using noble-metal ions: in situ formation of nanoparticles.

One of the purposes of the project was to develop the method of preparation of 3D macroporous hydrogel with a structure of interconnected pores by the use of noncovalent interactions. The combination of chitosan and noble-metal complexes was investigated as cross-linking agents for the preparation of ionic cryogels (ICs). Furthermore, the treatment of the ICs containing gold complex by glutaraldehyde results in spontaneous formation of gold nanoparticles (AuNPs) and chemical cross-linking of the cryogel. The characterization of prepared macroporous materials was carried out by the use of FTIR, SEM, TEM techniques, and texture analyzer. A new strategy for control of size distribution of AuNPs was suggested. The size distribution of obtained AuNPs and their population inside of walls of cryogels was estimated. A method for quantifying unreacted chloroauric acid in the presence of acetic acid was proposed. The possibility of use of prepared cryogels with immobilized AuNPs as a catalytic flow through reactor is shown.

Poly(hydroxyethyl methacrylate)-based composite cryogel with embedded macroporous cellulose beads for the separation of human serum immunoglobulin and albumin.

A novel super-macroporous monolithic composite cryogel was prepared by embedding macroporous cellulose beads into poly(hydroxyethyl methacrylate) cryogel. The cellulose beads were fabricated by using a microchannel liquid-flow focusing and cryopolymerization method, while the composite cryogel was prepared by cryogenic radical polymerization of the hydroxyethyl methacrylate monomer with poly(ethylene glycol) diacrylate as cross-linker together with the cellulose beads. After graft polymerization with (vinylbenzyl)trimethylammonium chloride, the composite cryogel was applied to separate immunoglobulin-G and albumin from human serum. Immunoglobulin-G with a mean purity of 83.2% and albumin with a purity of 98% were obtained, indicating the composite cryogel as a promising chromatographic medium in bioseparation for the isolation of important bioactive proteins like immunoglobulins and albumins.

Composite cryogel with immobilized concanavalin A for affinity chromatography of glycoproteins.

Composite cryogels containing porous adsorbent particles were prepared under cryogelation conditions. The composites with immobilized concanavalin A (Con A) were used for capturing glycoproteins. Adsorbent particles were introduced into the structure in order to improve the capacity and to facilitate the handling of the particles. The monolithic composite cryogels were produced from suspensions of polyvinyl alcohol particles and porous adsorbent particles and cross-linked under acidic conditions at sub-zero temperature. The cryogels were epoxy activated and Con A was immobilized as an affinity ligand. Binding and elution of horseradish peroxidase (HRP) was studied in batch experiment and in a chromatographic setup. Increasing adsorbent concentration in composite cryogels will increase ligand density, which therefore enhances the amount of bound HRP from 0.98 till 2.9 (milligram enzyme per milliliter of gel) in the chromatographic system. The material was evaluated in 10 cycles for binding and elution of HRP.

Porous protein-based scaffolds prepared through freezing as potential scaffolds for tissue engineering.

Successful tissue engineering with the aid of a polymer scaffold offers the possibility to produce a larger construct and to mould the shape after the defect. We investigated the use of cryogelation to form protein-based scaffolds through different types of formation mechanisms; enzymatic crosslinking, chemical crosslinking, and non-covalent interactions. Casein was found to best suited for enzymatic crosslinking, gelatin for chemical crosslinking, and ovalbumin for non-covalent interactions. Fibroblasts and myoblasts were used to evaluate the cryogels for tissue engineering purposes. The stability of the cryogels over time in culture differed depending on formation mechanism. Casein cryogels showed best potential to be used in skeletal tissue engineering, whereas gelatin cryogels would be more suitable for compliable soft tissues even though it also seemed to support a myogenic phenotype. Ovalbumin cryogels would be better suited for elastic tissues with faster regeneration properties due to its faster degradation time. Overall, the cryogelation technique offers a fast, cheap and reproducible way of creating porous scaffolds from proteins without the use of toxic compounds.

Preparation of macroporous cryostructurated gel monoliths, their characterization and main applications.

Cryostructuration platform renders it possible to form macroporous materials (known as cryogels) with a broad range of porosity, from structures with combination of meso- and macropores to structures with 100-µm sized macropores. When these materials are formed in the shape of monoliths (monolithic cryogels), they present a unique monolithic stationary medium for specific applications. This review summarizes the recent research on the preparation and characterization of cryostructurated monolithic cryogels for (bio)separation and points to some future perspectives.

Modulating the porosity of cryogels by influencing the nonfrozen liquid phase through the addition of inert solutes.

The freezing of monomeric mixtures is known to concentrate solutes in a nonfrozen phase in the area surrounding the ice crystals. The concentration of such solutes is determined by the freezing temperature. Although salts or solvents do not directly react in the polymerization reaction, they do change the composition and properties of the nonfrozen phase. In this study, we investigated the influence of the addition of various salts and solvents on the structure of macroporous hydrogels formed in a semifrozen state through aqueous free-radical polymerization. The change in composition of the nonfrozen phase was studied using NMR to monitor the freezing of water, and the structural changes of the gels were observed using scanning electron microscopy. It was found that the addition of methanol or acetone caused the formation of reaction-induced phase separation polymerization due to cryoconcentration, which caused a significant increase of methanol or acetone in the nonfrozen phase. This resulted in a material with bimodal pore size distribution with pores of 10-80 µm in diameter caused by cryogelation, and with pores in the polymeric matrix with a diameter of less than 1 µm due to the reaction-induced phase separation. Addition of salts to the monomeric mixture resulted in a structure with only pores of 10-80 µm in diameter due to cryogelation. Increasing the amount of salts added resulted in the formation of thicker pore walls and thus a slight reduction in pore size compared to a sample with no added solute. The possibility of changing the structure and properties of the gels by adding different solutes could open up new applications for these materials, for example, chromatography applications.

Ultrafast Responsive Poly- (N-isopropylacrylamide) Gel Produced by Cryostructuring of Self-crosslinkable Polymer Microgels.

A macroporous material composed of closely aggregated particles was prepared by cryo-structuration of N-isopropylacrylamide-co-N-hydroxymethylacrylamide (NIPA-co-HMAm) particle suspensions. The formed structure was maintained by the formation of covalent bonds through self-crosslinking between the particles while the system was in a semi-frozen state thus avoiding the need to freeze-dry the sample. This resulted in macroporous structure composed of closely aggregated thermoresponsive particles which exhibit an ultrafast temperature response. The response rate can be attributed both to the macroporous structure as well as the fast responsive properties of the individual particles.

Evaluation of selective composite cryogel for bromate removal from drinking water.

Bromate, which is a potential carcinogen, should be removed from drinking water to levels of less than 10 microg/L. A chitosan-based molecularly imprinted polymer (MIP) and a sol-gel ion-exchange double hydrous oxide (Fe(2)O(3) x Al(2)O(3) x xH(2)O) adsorbent (inorganic adsorbent) were prepared for this purpose. The sorption behavior of each adsorbent including sorption kinetics, isotherms, effect of pH and selective sorption were investigated in detail. Sorption experimental results showed that the MIP adsorbents had better selectivity for bromate, even in the presence of high concentrations of nitrate, as compared to the inorganic adsorbent. It was found that pH does not affect the adsorption of bromate when using the inorganic adsorbent. Additionally, both adsorbents were immobilized in a polymeric cryogel inside plastic carriers to make them more practical for using in larger scale. Regeneration of the cryogels either containing MIP or inorganic adsorbents were carried out by 0.1 M NaOH and 0.1 M NaCl, respectively. It was found that the regenerated MIP and inorganic adsorbents could be used at least three and five times, respectively, without any loss in their sorption capacity.

Building macroporous materials from microgels and microbes via one-step cryogelation.

Macroporous materials are prepared from microgels or microbes by one-step chemical cross-linking under semifrozen conditions. This avoids the use of freeze drying of the sample because a chemically stable structure is prepared under semifrozen conditions. Cryostructuration results in a material with pore walls composed of closely packed particles.

Modeling of protein breakthrough performance in cryogel columns by taking into account the overall axial dispersion.

A model considering the overall axial dispersion for describing protein adsorption and breakthrough in monolithic cryogel beds has been developed. The microstructure of cryogels was characterized by tortuous capillaries with a normal diameter distribution but a constant pore wall thickness. The axial dispersion within cryogel columns was described by using the overall axial dispersion coefficient, which can be easily obtained by matching the experimental breakthrough curves without adsorption or measuring residence time distributions (RTDs). Experimental breakthrough curves of lysozyme within a metal-chelated affinity cryogel by Persson et al. (Biotechnol. Bioeng. 2004, 88, 224-236) and a cation-exchange cryogel by Yao et al. (J. Chromatogr. A 2007, 1157, 246-251) were employed as examples to test the model. The results showed that by using the axial dispersion coefficient and assuming uniform radial concentration profile at a given cross-section of the cryogel along the bed height, the model can describe the detailed behaviors of the in-bed overall axial dispersion, the in-pore mass transfer, as well as the protein adsorption and breakthrough. For a known overall axial dispersion coefficient, the lumped parameter of the mass transfer coefficient between the bulk liquid and the capillary wall can be determined by fitting the protein breakthrough curve at a known chromatographic condition. Once this parameter is determined, the model can be used to predict the protein breakthrough profiles under different conditions based on the basic physical parameters of the cryogel bed and the properties of the fluid and protein. The effective capillary diameters employed in the model are close to the actual pore sizes observed from the images by SEM. The model predictions of lysozyme breakthrough profiles at various flow rates are also in good agreement with the experimental data in both the metal-chelated affinity and cation-exchange cryogel columns.

Chromatographic adsorption of serum albumin and antibody proteins in cryogels with benzyl-quaternary amine ligands.

The preparation and characterization of mixed-mode adsorbents for a typical separation purpose are of great importance in bioseparation areas. In this work, we prepared a new monolithic cryogel with a combination of ion-exchange and hydrophobic functions by employing benzyl-quaternary amine groups. The fundamental cryogel properties, protein equilibrium adsorption isotherm and chromatographic adsorption in the cryogel were measured experimentally. The results showed that, by using bovine serum album as the model protein, the dual functional cryogel has protein binding capability even in salt solution and the buffer with pH close or below the protein isoelectric point due to both the electrostatic and hydrophobic interactions. A capillary-based adsorption model was developed, which provided satisfied insights of the microstructure, axial dispersion, mass transfer as well as protein adsorption characteristics within the cryogel bed. The chromatographic isolation of bioactive proteins from rabbit blood serum was carried out by the cryogel. Immunoglobulin G antibody with a purity of 98.2% and albumin with a purity of 96.8% were obtained, indicating that the cryogel could be an interesting and promising adsorbent in bioseparation areas.

Improved arsenic(III) adsorption by Al2O3 nanoparticles and H2O2: evidence of oxidation to arsenic(V) from X-ray absorption spectroscopy.

We have investigated the oxidation of inorganic As(III) with H2O2 catalysed by Al2O3, using X-ray absorption near-edge structure and extended X-ray absorption fine structure spectroscopy. The effects of different reaction conditions (pH, time and initial H2O2 concentration) were also studied as were the kinetics of the oxidation reaction. We demonstrated that As(III) was oxidized to As(V) in the presence of H2O2 and Al2O3. Furthermore, all arsenic species found on the Al2O3 surface were in the As(V) state. The presence of both Al2O3 and H2O2 was necessary for oxidation of As(III) to take place within the period of time studied. The oxidation kinetics indicate a mechanism where reversible As(III) binding to the alumina surface is followed by irreversible oxidation by H2O2 leading to strongly bound As(V). Results from this study indicate that there is a surface-catalysed oxidation of As(III) on Al2O3 by H2O2, a reaction that can take place in nature and can be of help in the development of novel treatment systems for As(III) removal.

A thiol functionalized cryogel as a solid phase for selective reduction of a cysteine residue in a recombinant human growth hormone variant.

Site selective chemical modification is a preferred method, employed to prolong the circulation half-life of biopharmaceuticals. Cysteines have been used as attachment point for such modification, however, to be susceptible for chemical modification the involved thiol must be in its reduced form. Proteins often contain disulfides, which aid to maintain their tertiary structure and therefore must remain intact. Thus, methods for selectively reducing cysteine residues, introduced through site-directed mutagenesis, are of interest. In this study a macroporous, polymeric monolith was designed for selectively reducing a single cysteine residue inserted in recombinant human growth hormone (hGH). Advantages of such a material are the circumvention of the need to remove the reducing agent after reaction, as well as milder reduction conditions and a concomitant lower risk of reducing the native disulfides. The designed monolith showed very high capacity towards the selective reduction of an unpaired cysteine residue in a recombinant hGH variant. Factors influencing the selectivity and rate of reaction were investigated and it was found that monolith thiol loading, and buffer pH had an effect on the rate of reduction, whereas hGH variant concentration and buffer conductivity influenced both rate of reduction and selectivity. The developed system constitutes the basis for the development of a scalable platform for selective reduction of a capped cysteine residue in hGH.

Γ-Al2O3-based nanocomposite adsorbents for arsenic(V) removal: assessing performance, toxicity and particle leakage.

The generation and development of effective adsorption materials for arsenic removal are urgently needed due to acute arsenic contamination of water sources in many regions around the world. In the search for these new adsorbents, the application of nanomaterials or nanocomposites, and especially the use of nanoparticles (NPs), has proven increasingly attractive. While the adsorptive performance of a range of nanocomposite and nanomaterial-based systems has been extensively reviewed in previously-published literature, the stability of these systems in terms of NP release, i.e. the ability of the nanomaterial or nanocomposite to retain incorporated NPs, is less well understood. Here we examine the performance of nanocomposites comprised of aluminium oxide nanoparticles (AluNPs) incorporated in macroporous polyacrylamide-based cryogels (n-Alu-cryo, where n indicates the percentage of AluNPs in the polymer material (n=0-6%, w/v)) for As(V) adsorption, and evaluate AluNP leakage before and after the use of these materials. A range of techniques is utilised and assessed (SEM, TEM, mass weight change, PIXE and in vitro toxicity studies). The 4-Alu-cryo nanocomposite was shown to be optimal for minimising AluNP losses while maximising As(V) removal. From the same nanocomposite we were further able to show that NP losses were not detectable at the AluNP concentrations used in the study. Toxicity tests revealed that no cytotoxic effects could be observed. The cryogel-AluNPs composites were not only effective in As(V) removal but also in immobilising the AluNPs. More challenging flow-through conditions for the evaluation of NP leakage could be included as a next step in a continued study assessing particle loss and subsequent toxicity.

Arsenite adsorption on cryogels embedded with iron-aluminium double hydrous oxides: possible polishing step for smelting wastewater?

Arsenic is among the most toxic elements and it commonly exists in water as arsenite (As(III)) and arsenate (As(V)) ions. As(III) removal often requires a pre-oxidation or pH adjustment step and it is a challenge to adsorb As(III) at circumneutral pH. In this study, iron-aluminium double hydrous oxides were synthesized and incorporated into cryogels. The resulting composite cryogels were evaluated for As(III) adsorption. Initial experiments indicated that the adsorbent showed similar adsorption kinetics for both As(V) and As(III) ions. The adsorption of As(III) best fit the Langmuir isotherm and the maximum adsorption capacity was 24.6 mg/g. Kinetic modeling indicated that the mechanism of adsorption was chemisorption, making the adsorbent-adsorbate interactions independent of charge and hence allowing the adsorbent to function equally efficient across pH 4-11. A Swedish smelting wastewater was used to evaluate the adsorption performance in continuous mode. The studies showed that the adsorbent was successful in reducing the arsenic concentrations below the European Union emission limit (0.15 mg/l) in a smelting wastewater collected after two precipitation processes. The arsenic removal was obtained without requiring a pH adjustment or a pre-oxidation step, making it a potential choice as an adsorbent for As(III) removal from industrial wastewaters.

Cryogelation of molecularly imprinted nanoparticles: a macroporous structure as affinity chromatography column for removal of ß-blockers from complex samples.

In this work, a new macroporous molecularly imprinted cryogel (MIP composite cryogel) was synthesized by glutaraldehyde cross-linking reaction of poly(vinyl alcohol) (PVA) particles and amino-modified molecularly imprinted core-shell nanoparticles. The MIP core-shell nanoparticles were prepared using propranolol as a template by one-pot precipitation polymerization with sequential monomer addition. The characteristics of the MIP composite cryogel were studied by scanning electron microscopy (SEM) and texture analyzer. The macroporous structure of the composite (with the pore size varying from a few micrometers to 100 µm) enabled high mass transfer of particulate-containing fluids. In a solid phase extraction (SPE) process, the efficiency and selectivity of the MIP composite cryogel were investigated, where the cryogel was used as an affinity matrix to remove propranolol from aqueous solution as well as from complex plasma sample without prior protein precipitation. The MIP composite cryogel maintained high selectivity and stability and could be used repeatedly after regeneration.

Evaluation of macroporous blood and plasma scaffolds for skeletal muscle tissue engineering.

The field of tissue engineering has a growing need for suitable scaffold materials to become attractive as a clinical therapy. To use a completely autologous construct to repair a damaged or diseased tissue is an appealing thought. As a model system, two types of scaffolds were prepared from biological fluids: blood and plasma. The prepared scaffolds formed a macroporous structure with elastic mechanical properties that were further evaluated with myoblast cell line (C2C12) cultivation and transplantation into mouse skeletal muscle. The cells were found to attach, proliferate, and migrate through all the different scaffolds. Moreover, the cells underwent myogenic differentiation, showing typical cell morphology aligned in a parallel fashion. An increased level of myogenin mRNA was found with the time of culture. Furthermore, myogenic markers MyoD1, desmin, myogenin and myosin, as well as ß-dystroglycan and the laminin α2 chain, were found to be expressed. In vivo data indicated that the scaffolds degraded and were replaced with regenerated muscle fibres. We conclude that the two types of macroporous scaffolds based on blood or plasma have potential in the field of skeletal muscle tissue engineering.

Gelatin cryogels crosslinked with oxidized dextran and containing freshly formed hydroxyapatite as potential bone tissue-engineering scaffolds.

Gelatin-based cryogels were prepared by using a novel crosslinker, oxidized dextran, which was synthesized and used in the study. The cryogels were also loaded with freshly formed hydroxyapatite (HA) particles. These cryogels are opaque, spongy and highly elastic and have a pore structure with large interconnected pores. They swell about 500% in aqueous media and within a few minutes reach their final swollen forms. The elastic moduli of HA-containing cryogels were 18.5 ± 3.0 kPa, which is suitable for non-load-bearing bone tissue-engineering (TE) applications, especially for the craniofacial area.

Enzyme-catalyzed crosslinking in a partly frozen state: a new way to produce supermacroporous protein structures.

In this study a new way to produce supermacroporous protein structures was investigated. Enzyme-mediated crosslinking of gelatin or casein was performed in a partly frozen state, which yielded stable, protein-based cryogels. The reaction kinetics for the formation of cryogels were found to be fairly slow, most likely due to the low temperature (-12 °C) used or due to an increased viscosity owing to the cryo-concentration taking place. The produced cryogels were characterized with regards to their physical properties and in vitro degradation. Furthermore, cryogels produced from gelatin and casein were evaluated as potential scaffolds by fibroblast cultivation to confirm their in vitro biocompatibility. Gelatin- and casein-based scaffolds both supported cell proliferation and migration through the scaffold.

Oxidized dextran as crosslinker for chitosan cryogel scaffolds and formation of polyelectrolyte complexes between chitosan and gelatin.

Macroporous scaffolds composed of chitosan and using oxidized dextran as a crosslinker are produced through cryogelation. Introducing gelatin as a third component into the structure results in the formation of mesopores in the pore walls, which are not seen if gelatin is excluded. The mesoporous structure is explained by the formation of polyelectrolyte complexes between chitosan and gelatin before crosslinking takes place. The scaffolds exhibit highly elastic properties withstanding compressions up to 60%. The in vitro biocompatibility of the cryogels is evaluated using fibroblasts from a mouse cell line (L929) and it is seen that the cells adhere and proliferate on the scaffolds. The mesoporous structure seems to have a positive effect on proliferation.