RESUMEN
Reactions that result in the oxy-functionalization of sp2 C-H bonds to give phenols are relatively rare. Here we report experiments and density functional theory (DFT) calculations that demonstrate selective C-H bond hydroxylation of nitroarenes to their corresponding mono-phenoxide as the exclusive product using OsO4 in a highly basic solvent mixture of water, hydroxide, and pyridine. DFT calculations using a mixed explicit/continuum solvent approach indicate that there is likely a mixture of OsO4-hydroxide/pyridine ground-state structures that have competitive reactivity and that the mechanism involves the nucleophilic addition of an anionic metal-oxo species to the arene followed by a hydride transfer process that is different from the standard [3 + 2] mechanism often invoked for the OsO4 oxidation of σ and π bonds. This work demonstrates the utility of using a strongly basic solvent for C-H bond oxidation reactions as this effectively converts any reactive phenolic product into the corresponding phenoxide, which is protected and essentially inert to further oxidation by the nucleophilic metal-oxo species.
RESUMEN
Sb(V) in strong Brønsted acid solvents is traditionally assumed to react with light alkanes through superacid protonolysis, which results in carbocation intermediates, H2, and carbon oligomerization. In contrast to this general assumption, our density functional theory (DFT) calculations revealed an accessible barrier for C-H activation between methane and Sb(V) in sulfuric acid that could potentially outcompete superacid protonolysis. This prompted us to experimentally examine this reaction in sulfuric acid with oleum, which has never been reported because of presumed superacid reactivity. Reaction of methane at 180 °C for 3 h resulted in very high yields of methyl bisulfate without significant overoxidation. Our DFT calculations show that a C-H activation and Sb-Me bond functionalization mechanism to give methyl bisulfate outcompetes methane protonolysis and many other possible reaction mechanisms, such as electron transfer, proton-coupled electron transfer, and hydride abstraction. Our DFT calculations also explain experimental hydrogen-deuterium exchange studies and the absence of methane carbo-functionalization/oligomerization products. Overall, this work demonstrates that in very strong Brønsted acid solvent, Sb(V) can induce innersphere reaction mechanisms akin to transition metals and outcompete superacid reactivity.
RESUMEN
One of the remaining "grand challenges" in chemistry is the development of a next generation, less expensive, cleaner process that can allow the vast reserves of methane from natural gas to augment or replace oil as the source of fuels and chemicals. Homogeneous (gas/liquid) systems that convert methane to functionalized products with emphasis on reports after 1995 are reviewed. Gas/solid, bioinorganic, biological, and reaction systems that do not specifically involve methane functionalization are excluded. The various reports are grouped under the main element involved in the direct reactions with methane. Central to the review is classification of the various reports into 12 categories based on both practical considerations and the mechanisms of the elementary reactions with methane. Practical considerations are based on whether or not the system reported can directly or indirectly utilize O2 as the only net coreactant based only on thermodynamic potentials. Mechanistic classifications are based on whether the elementary reactions with methane proceed by chain or nonchain reactions and with stoichiometric reagents or catalytic species. The nonchain reactions are further classified as CH activation (CHA) or CH oxidation (CHO). The bases for these various classifications are defined. In particular, CHA reactions are defined as elementary reactions with methane that result in a discrete methyl intermediate where the formal oxidation state (FOS) on the carbon remains unchanged at -IV relative to that in methane. In contrast, CHO reactions are defined as elementary reactions with methane where the carbon atom of the product is oxidized and has a FOS less negative than -IV. This review reveals that the bulk of the work in the field is relatively evenly distributed across most of the various areas classified. However, a few areas are only marginally examined, or not examined at all. This review also shows that, while significant scientific progress has been made, greater advances, particularly in developing systems that can utilize O2, will be required to develop a practical process that can replace the current energy and capital intensive natural gas conversion process. We believe that this classification scheme will provide the reader with a rapid way to identify systems of interest while providing a deeper appreciation and understanding, both practical and fundamental, of the extensive literature on methane functionalization. The hope is that this could accelerate progress toward meeting this "grand challenge."
RESUMEN
Owing to the strong nonpolar bonds involved, selective C-H functionalization of methane and ethane to esters remains a challenge for molecular homogeneous chemistry. We report that the computationally predicted main-group p-block SbV (TFA)5 complex selectively functionalizes the C-H bonds of methane and ethane to the corresponding mono and/or diol trifluoroacetate esters at 110-180 °C with yields for ethane of up to 60 % with over 90 % selectivity. Experimental and computational studies support a unique mechanism that involves SbV -mediated C-H activation followed by functionalization of a SbV -alkyl intermediate.
RESUMEN
The complex Pt(IPr)(SnBu(t)3)(H) (1) was obtained from the reaction of Pt(COD)2 with Bu(t)3SnH and IPr [IPr = N,N'-bis(2,6-diisopropylphenyl)imidazol-2-ylidene]. Complex 1 undergoes exchange reactions with deuterated solvents (C6D6, toluene-d8, and CD2Cl2), where the hydride ligand and the methyl hydrogen atoms on the isopropyl group of the IPr ligand have been replaced by deuterium atoms. Complex 1 reacts with H2 gas reversibly at room temperature to yield the complex Pt(IPr)(SnBu(t)3)(H)3 (2). Complex 2 also undergoes exchange reactions with deuterated solvents as in 1 to deuterate the hydride ligands and the methyl hydrogen atoms on the isopropyl group of the IPr ligand. Complex 1 catalyzes the hydrogenation of styrene to ethylbenzene at room temperature. The reaction of 1 with 1 equiv of styrene at -20 °C yields the η(2)-coordinated product Pt(IPr)(SnBu(t)3)(η(2)-CH2CHPh)(H) (3), and with 2 equiv of styrene, it forms Pt(IPr)(η(2)-CH2CHPh)2 (4).
RESUMEN
The reaction of Pt(COD)2 with one equivalent of tri-tert-butylstannane, Bu(t)3SnH, at room temperature yields Pt(SnBu(t)3)(COD)(H)(3) in quantitative yield. In the presence of excess Bu(t)3SnH, the reaction goes further, yielding the dinuclear bridging stannylene complex [Pt(SnBu(t)3)(µ-SnBu(t)2)(H)2]2 (4). The dinuclear complex 4 reacts rapidly and reversibly with CO to furnish [Pt(SnBu(t)3)(µ-SnBu(t)2)(CO)(H)2]2 (5). Complex 3 reacts with N,N'-di-tert-butylimidazol-2-ylidene, IBu(t), at room temperature to give the dinuclear bridging hydride complex [Pt(SnBu(t)3)(IBu(t))(µ-H)]2 (6). Complex 6 reacts with CO, C2H4, and H2 to give the corresponding mononuclear Pt complexes Pt(SnBu(t)3)(IBu(t))(CO)(H)(7), Pt(SnBu(t)3)(IBu(t))(C2H4)(H)(8), and Pt(SnBu(t)3)(IBu(t))(H)3 (9), respectively. The reaction of IBu(t) with the complex Pt(SnBu(t)3)2(CO)2 (10) yielded an abnormal Pt-carbene complex Pt(SnBu(t)3)2(aIBu(t))(CO) (11). DFT computational studies of the dimeric complexes [Pt(SnR3)(NHC)(µ-H)]2, the potentially more reactive monomeric complexes Pt(SnR3)(NHC)(H) and the trihydride species Pt(SnBu(t)3)(IBu(t))(H)3 have been performed, for NHC = IMe and R = Me and for NHC = IBu(t) and R = Bu(t). The structures of complexes 3-8 and 11 have been determined by X-ray crystallography and are reported.
RESUMEN
The kinetics of the reaction of Ph3SnH with excess â¢Cr(CO)3C5Me5 = â¢Cr, producing HCr and Ph3Sn-Cr, was studied in toluene solution under 2-3 atm CO pressure in the temperature range of 17-43.5 °C. It was found to obey the rate equation d[Ph3Sn-Cr]/dt = k[Ph3SnH][â¢Cr] and exhibit a normal kinetic isotope effect (kH/kD = 1.12 ± 0.04). Variable-temperature studies yielded ΔH = 15.7 ± 1.5 kcal/mol and ΔS = -11 ± 5 cal/(mol·K) for the reaction. These data are interpreted in terms of a two-step mechanism involving a thermodynamically uphill hydrogen atom transfer (HAT) producing Ph3Sn⢠and HCr, followed by rapid trapping of Ph3Sn⢠by excess â¢Cr to produce Ph3Sn-Cr. Assuming an overbarrier of 2 ± 1 kcal/mol in the HAT step leads to a derived value of 76.0 ± 3.0 kcal/mol for the Ph3Sn-H bond dissociation enthalpy (BDE) in toluene solution. The reaction enthalpy of Ph3SnH with excess â¢Cr was measured by reaction calorimetry in toluene solution, and a value of the Sn-Cr BDE in Ph3Sn-Cr of 50.4 ± 3.5 kcal/mol was derived. Qualitative studies of the reactions of other R3SnH compounds with â¢Cr are described for R = nBu, tBu, and Cy. The dehydrogenation reaction of 2Ph3SnH â H2 + Ph3SnSnPh3 was found to be rapid and quantitative in the presence of catalytic amounts of the complex Pd(IPr)(P(p-tolyl)3). The thermochemistry of this process was also studied in toluene solution using varying amounts of the Pd(0) catalyst. The value of ΔH = -15.8 ± 2.2 kcal/mol yields a value of the Sn-Sn BDE in Ph3SnSnPh3 of 63.8 ± 3.7 kcal/mol. Computational studies of the Sn-H, Sn-Sn, and Sn-Cr BDEs are in good agreement with experimental data and provide additional insight into factors controlling reactivity in these systems. The structures of Ph3Sn-Cr and Cy3Sn-Cr were determined by X-ray crystallography and are reported. Mechanistic aspects of oxidative addition reactions in this system are discussed.
RESUMEN
The complex Pt(SnBu(t)3)2(CNBu(t))2(H)2, 1, was obtained from the reaction of Pt(COD)2 and Bu(t)3SnH, followed by addition of CNBu(t). The two hydride ligands in 1 can be eliminated, both in solution and in the solid state, to yield Pt(SnBu(t)3)2(CNBu(t))2, 2. Addition of hydrogen to 2 at room temperature in solution and in the solid state regenerates 1. Complex 2 catalyzes H2-D2 exchange in solution to give HD. The proposed mechanism of exchange involves reductive elimination of Bu(t)3SnH from 1 to afford vacant sites on the Pt center, thus facilitating the exchange process. This is supported by isolation and characterization of Pt(SnMes3)(SnBu(t)3)(CNBu(t))2, 3, when the addition of H2 to 2 was carried out in the presence of free ligand Mes3SnH (Mes = 2,4,6-Me3C6H2). Complex Pt(SnMes3)2(CNBu(t))2, 5, can be prepared from the reaction of Pt(COD)2 with Mes3SnH and CNBu(t). The exchange reaction of 2 with Ph3SnH gave Pt(SnPh3)3(CNBu(t))2(H), 6, wherein both SnBu(t)3 ligands are replaced by SnPh3. Complex 6 decomposes in air to form square planar Pt(SnPh3)2(CNBu(t))2, 7. The complex Pt(SnPr(i)3)2(CNBu(t))2, 8, was also prepared. Out of the four analogous complexes Pt(SnR3)2(CNBu(t))2 (R = Bu(t), Mes, Ph, or Pr(i)), only the Bu(t) analogue does both H2 activation and H2-D2 exchange. This is due to steric effects imparted by the bulky Bu(t) groups that distort the geometry of the complex considerably from planarity. The reaction of Pt(COD)2 with Bu(t)3SnH and CO gas afforded trans-Pt(SnBu(t)3)2(CO)2, 9. Compound 9 can be converted to 2 by replacement of the CO ligands with CNBu(t) via the intermediate Pt(SnBu(t)3)2(CNBu(t))2(CO), 10.
RESUMEN
In the current investigation, reactions of the "bow-tie" Ni(η(2)-TEMPO)2 complex with an assortment of donor ligands have been characterized experimentally and computationally. While the Ni(η(2)-TEMPO)2 complex has trans-disposed TEMPO ligands, proton transfer from the C-H bond of alkyne substrates (phenylacetylene, acetylene, trimethylsilyl acetylene, and 1,4-diethynylbenzene) produce cis-disposed ligands of the form Ni(η(2)-TEMPO)(κ(1)-TEMPOH)(κ(1)-R). In the case of 1,4-diethynylbenzene, a two-stage reaction occurs. The initial product Ni(η(2)-TEMPO)(κ(1)-TEMPOH)[κ(1)-CC(C6H4)CCH] is formed first but can react further with another equivalent of Ni(η(2)-TEMPO)2 to form the bridged complex Ni(η(2)-TEMPO)(κ(1)-TEMPOH)[κ(1)-κ(1)-CC(C6H4)CC]Ni(η(2)-TEMPO)(κ(1)-TEMPOH). The corresponding reaction with acetylene, which could conceivably also yield a bridging complex, does not occur. Via density functional theory (DFT), addition mechanisms are proposed in order to rationalize thermodynamic and kinetic selectivity. Computations have also been used to probe the relative thermodynamic stabilities of the cis and trans addition products and are in accord with experimental results. Based upon the computational results and the geometry of the experimentally observed product, a trans-cis isomerization must occur.