Influence of O-H⋠⋠⋠Pt interactions on photoluminescent response in the (Et4N)2{[Pt(bph)(CN)2][phenylene-1,4-diresorcinol]} framework.

Tunable photoluminescence (PL) is one of the hot topics in current materials science, and research performed on the molecular phases is at the forefront of this field. We present the new (Et4N)2[PtII(bph)(CN)2]⋅rez3⋅1/3H2O (Pt2rez3) (bph=biphenyl-2,2'-diyl; rez3=3,3",5,5"-tetrahydroxy-1,1':4',1"-terphenyl, phenylene-1,4-diresorcinol coformer, a linear quaternary hydrogen bond donor) co-crystal salt based on the recently appointed promising [PtII(bph)(CN)2]2- luminophore. Within the extended hydrogen-bonded subnetwork [PtII(bph)(CN)2]2- complexes and rez3 coformer molecules form two types of contacts: the rez3O-H⋅⋅⋅Ncomplex ones in the equatorial plane of the complex and non-typical rez3O-H⋅⋅⋅Pt ones along its axial direction. The combined structural, PL, and DFT approach identified the rez3O-H⋅⋅⋅Pt synthons to be crucial in promoting the noticeable uniform redshift of bph ligand centered (LC) emission compared to the LC emission of the (Et4N)2[PtII(bph)(CN)2]⋅H2O (Pt2) precursor, owing to the direct interference of the phenol group with the PtII-bph orbital system via altering the CT processes within. The high-resolution emission spectra for Pt2 and Pt2rez3 were successfully reproduced at 77 K by using the Franck-Cordon expressions. The possibility to tune PL properties along the plausible continuum of rez3O-H⋅⋅⋅Pt synthons is indicated, considering various scenarios of molecular occupation of the space above and below the complex plane.

Photoinduced Aryl Transfer from Imidazolyl-Quinoline π-Conjugated Systems.

Aryl transfer between heteroatoms was photochemically available through radical initiation followed by a bimolecular reaction. However, such an excited-state reaction has rarely been reported through a photoinduced intramolecular pathway in the π-conjugated systems. Herein, we found, for the first time, a clean photoinduced intramolecular aryl shift for imidazolyl-quinoline derivatives 2NQ (imidazophenanthrene) and 4NQX (imidazophenanthroline), of which the photoproducts are thermally reversible. Upon light irradiation of the studied compounds in solution, an appreciable blue fluorescence along with a gradual change in color appearance was observed, the photoluminescence and photoconversion quantum yields of which were shown to be competitive in the same excited state. We were able to harness the photoconversion quantum yields of the NQ compounds with facile electronic modifications. These, in combination with time-resolved studies on the NQ compounds, gave an oxygen-insensitive aryl transfer rate within 1-100 ns. The anomalously slow intramolecular reaction rates were further proven to be associated with the ∼5.0 kcal/mol transition free energy. The photoproducts NQ_rs were isolated, identified by X-ray analyses, and also shown to demonstrate anti-Vavilov reverse reactions back to the NQ compounds in the higher-lying excited state. The discovery of photoinduced intramolecular aryl transfer paves a new pathway in the synthetic field, which may also be extended and far-reaching to solar-chemical storage under an appropriate design strategy.

From Terminal to Spiro-Phosphonium Acceptors, Remarkable Moieties to Develop Polyaromatic NIR Dyes.

Phosphonium-based compounds gain attention as promising photofunctional materials. As a contribution to the emerging field, we present a series of donor-acceptor ionic dyes, which were constructed by tailoring phosphonium (A) and extended π-NR2 (D) fragments to an anthracene framework. The alteration of the π-spacer of electron-donating substituents in species with terminal -+ PPh2 Me groups exhibits a long absorption wavelength up to λabs =527 nm in dichloromethane and shifted the emission to the near-infrared (NIR) region (λ=805 nm for thienyl aniline donor), although at low quantum yield (Φ<0.01). In turn, the introduction of a P-heterocyclic acceptor substantially narrowed the optical bandgap and improved the efficiency of fluorescence. In particular, the phospha-spiro moiety allowed to attain NIR emission (797 nm in dichloromethane) with fluorescence efficiency as high as Φ=0.12. The electron-accepting property of the phospha-spiro constituent outperformed that of the monocyclic and terminal phosphonium counterparts, illustrating a promising direction in the design of novel charge-transfer chromophores.

Fast and Tunable Phosphorescence from Organic Ionic Crystals.

Crystalline diphosphonium iodides [MeR2 P-spacer-R2 Me]I with phenylene (1, 2), naphthalene (3, 4), biphenyl (5) and anthracene (6) as aromatic spacers, are photoemissive under ambient conditions. The emission colors (λem values from 550 to 880 nm) and intensities (Φem reaching 0.75) are defined by the composition and substitution geometry of the central conjugated chromophore motif, and the anion-π interactions. Time-resolved and variable-temperature luminescence studies suggest phosphorescence for all the titled compounds, which demonstrate observed lifetimes of 0.46-92.23 µs at 297 K. Radiative rate constants kr as high as 2.8×105  s-1 deduced for salts 1-3 were assigned to strong spin-orbit coupling enhanced by an external heavy atom effect arising from the anion-π charge-transfer character of the triplet excited state. These rates of anomalously fast metal-free phosphorescence are comparable to those of transition metal complexes and organic luminophores that utilize triplet excitons via a thermally activated delayed fluorescence mechanism, making such ionic luminophores a new paradigm for the design of photofunctional and responsive molecular materials.

Hybrid Inorganic-Organic Complexes of Zn, Cd, and Pb with a Cationic Phenanthro-diimine Ligand.

The phosphonium-decorated phenanthro-imidazolyl pyridine ligand, LP+Br, readily reacts with zinc(II) and cadmium(II) bromides to give inorganic-organic zero-dimensional compounds [LP+ZnBr2]2[ZnBr4] (1) and [(LP+)2Cd2Br4][CdBr4] (2), respectively, upon crystallization. These salts are moderately fluorescent in the solid state under ambient conditions (λem = 458 nm, Φem = 0.11 for 1; λem = 460 nm, Φem = 0.13 for 2). Their emission results from spin-allowed electronic transitions localized on the organic component with the negligible effect of [MBr4]2- and MBr2 units. Contrary to ionic species 1 and 2, lead(II) bromide affords a neutral and water-stable complex [(LP+)2Pb3Br8] (3), showing weak room-temperature phosphorescence arising from spin-orbit coupling due to the heavy atom effect. The emission, which is substantially enhanced for the amorphous sample of 3 (λem = 575 nm, Φem = 0.06), is assigned to the intraligand triplet excited state, which is a rare phenomenon among Pb(II) molecular materials.

Multiple Emission of Phosphonium Fluorophores Harnessed by the Pathways of Photoinduced Counterion Migration.

In the emerging field of intramolecular charge transfer induced counterion migration, we report the new insights into photophysical features of luminescent donor-acceptor phosphonium dyes (D-π-)n A+ [X- ] (π=-(C6 H4 )x -). The unique connectivity of the phosphorus atom affords multipolar molecules with a variable number of arms and the electronic properties of the acceptor group. In the ion-paired form, the transition from dipolar to quadrupolar configuration enhances the low energy migration-induced band by providing the additional pathways for anion motion. The multipolar architecture, adjustable lengths of the π-spacers and the nature of counterions allow for efficient tuning of the emission and achieving nearly pure white light with quantum yields around 30 %. The methyl substituent at the phosphorus atom reduces the rate of ion migration and suppresses the red shifted bands, simultaneously improving total emission intensity. The results unveil the harnessing of the multiple emission of phosphonium fluorophores by anion migration via structure and branching of donor-acceptor arms.

Ditopic Phosphide Oxide Group: A Rigidifying Lewis Base to Switch Luminescence and Reactivity of a Disilver Complex.

Heterodentate phosphines containing anionic organophosphorus groups remain virtually unexplored ligands in the coordination chemistry of coinage metals. A hybrid phosphine-phosphine oxide (o-Ph2PC6H4)2P(O)H (HP3O) readily forms the disilver complex [Ag2(P3O)2] (1) upon deprotonation of the (O)P-H fragment. Due to the electron-rich nature, the anionic phosphide oxide unit in 1 takes part in efficient intermolecular hydrogen bonding, which has an unusual and remarkably strong impact on the photoluminescence of 1, changing the emission from red (644 nm) to green-yellow (539 nm) in the solid. The basicity of the R2(O)P- group and its affinity for both inter- and intramolecular donor-acceptor interactions allow converting 1 into hydrohalogenated (2, 3) and boronated (4) derivatives, which reveal a gradual hypsochromic shift of luminescence, reaching the wavelength of 489 nm. Systematic variable-temperature analysis of the excited state properties suggests that thermally activated delayed fluorescence is involved in the emission process. The long-lived excited states for 1-4, the energy of which is largely regulated by means of the phosphide oxide unit, are potentially suitable for triplet energy transfer photocatalysis. With the highest T1 energy among 1-4, complex 4 demonstrates excellent photocatalytic activity in a [2+2] cycloaddition reaction, which has been realized for the first time for silver(I) compounds.

Cationic Organophosphorus Chromophores: A Diamond in the Rough among Ionic Dyes.

Tunable electron-accepting properties of the cationic phosphorus center, its geometry and unique preparative chemistry that allows combining this unit with diversity of π-conjugated motifs, define the appealing photophysical and electrochemical characteristics of organophosphorus ionic chromophores. This Minireview summarizes the achievements in the synthesis of the π-extended molecules functionalized with P-cationic fragments, modulation of their properties by means of structural modification, and emphasizes the important effect of cation-anion interactions, which can drastically change physical behavior of these two-component systems.

Modulation of Metallophilic and π-π Interactions in Platinum Cyclometalated Luminophores with Halogen Bonding.

Luminescent cyclometalated complexes [M(C^N^N)CN] (M=Pt, Pd; HC^N^N=pyridinyl- (M=Pt 1, Pd 5), benzyltriazolyl- (M=Pt 2), indazolyl- (M=Pt 3, Pd 6), pyrazolyl-phenylpyridine (M=Pt 4)) decorated with cyanide ligand, have been explored as nucleophilic building blocks for the construction of halogen-bonded (XB) adducts using IC6 F5 as an XB donor. The negative electrostatic potential of the CN group afforded CN⋅⋅⋅I noncovalent interactions for platinum complexes 1-3; the energies of XB contacts are comparable to those of metallophilic bonding according to QTAIM analysis. Embedding the chromophore units into XB adducts 1-3⋅⋅⋅IC6 F5 has little effect on the charge distribution, but strongly affects Pt⋅⋅⋅Pt bonding and π-stacking, which lead to excited states of MMLCT (metal-metal-to-ligand charge transfer) origin. The energies of these states and the photoemissive properties of the crystalline materials are primarily determined by the degree of aggregation of the luminophores via metal-metal interactions. The adduct formation depends on the nature of the metal and the structure of the metalated ligand, the variation of which can yield dynamic XB-supported systems, exemplified by thermally regulated transition 3↔3⋅⋅⋅IC6 F5 .

Photophysics and Excited State Dynamics of Cyclometalated [M(Phbpy)(CN)] (M = Ni, Pd, Pt) Complexes: A Theoretical and Experimental Study.

Cyclometalated complexes [M(Phbpy)(CN)] (HPhbpy = 6-phenyl-2,2'-bipyridine) of the group 10 metals (Ni, Pd, and Pt) bearing a carbanionic -C∧N∧N pincer ligand were synthesized and studied in a combined experimental and computational DFT approach. All three complexes were crystallographically characterized showing closely packed dimers with head-to-tail stacking and short metal-metal contacts in the solid state. The computational models for geometries, excited states, and electronic transitions addressed both monomeric (Ni-mono, Pd-mono, and Pt-mono) and dimeric (Ni-dim, Pd-dim, and Pt-dim) entities. Photophysical properties and excited state dynamics of all title complexes were investigated in solution and in the solid at 298 and 77 K. [Ni(Phbpy)(CN)] and [Pd(Phbpy)(CN)] are virtually nonemissive in solution at 298 K, whereas [Pt(Phbpy)(CN)] shows phosphorescence in CH2Cl2 (DCM) solution (λem = 562 nm) stemming from a mixed 3MLCT/ILCT (metal-to-ligand charge transfer/intraligand charge transfer) state. At 77 K in a glassy frozen DCM:MeOH matrix, [Pd(Phbpy)(CN)] shows a remarkable emission (λem = 571 nm) with a photoluminescence quantum yield reaching almost unity, whereas [Ni(Phbpy)(CN)] is again nonemissive. Calculations on the monomeric models M-mono show that low-lying metal-centered states (MC, i.e., d-d* configuration) with dissociative character quench the photoluminescence. In the solid state, the complexes [M(Phbpy)(CN)] show defined photoluminescence bands (λem = 561 nm for Pd and 701 nm for Pt). Calculations on the dimeric models M-dim shows that the axial M···M interactions alter the photophysical properties of Pd-dim and Pt-dim toward MMLCT (metal-metal-to-ligand charge transfer) excited states with Pd-dim showing temperature-dependent emission lifetimes, suggesting thermally activated delayed fluorescence, whereas Pt-dim displayed phosphorescence with excimeric character. The metal-metal interactions were analyzed in detail with the quantum theory of atoms in molecules approach.

Re(I) Complexes as Backbone Substituents and Cross-Linking Agents for Hybrid Luminescent Polysiloxanes and Silicone Rubbers.

This study focuses on the synthesis of hybrid luminescent polysiloxanes and silicone rubbers grafted by organometallic rhenium(I) complexes using Cu(I)-catalyzed azido-alkyne cycloaddition (CuAAC). The design of the rhenium(I) complexes includes using a diimine ligand to create an MLCT luminescent center and the introduction of a triple C≡C bond on the periphery of the ligand environment to provide click-reaction capability. Poly(3-azidopropylmethylsiloxane-co-dimethylsiloxane) (N3-PDMS) was synthesized for incorporation of azide function in polysiloxane chain. [Re(CO)3(MeCN)(5-(4-ethynylphenyl)-2,2'-bipyridine)]OTf (Re1) luminescent complex was used to prepare a luminescent copolymer with N3-PDMS (Re1-PDMS), while [Re(CO)3Cl(5,5'-diethynyl-2,2'-bipyridine)] (Re2) was used as a luminescent cross-linking agent of N3-PDMS to obtain luminescent silicone rubber (Re2-PDMS). The examination of photophysical properties of the hybrid polymer materials obtained show that emission profile of Re(I) moiety remains unchanged and metallocenter allows to control the creation of polysiloxane-based materials with specified properties.

Hexavanadate-Organogold(I) Hybrid Compounds: Synthesis by the Azide-Alkyne Cycloaddition and Density Functional Theory Study of an Intriguing Electron Density Distribution.

The fully oxidized Lindqvist-type hexavanadate compounds decorated by phosphine-derivatized Au(I) moieties oriented in a transoid fashion (n-Bu4N)2[V6O13{(OCH2)3CCH2(N3C2C6H5)AuP(C6H4OMe)3}2] (POMNAu) and (n-Bu4N)2[V6O13{(OCH2)3CCH2OCH2(C2N3H)AuP(C6H4OMe)3}2] (POMCAu) have been prepared by azide-alkyne cycloaddition reactions and characterized by various techniques, including NMR, IR, and UV/vis spectroscopy and electrospray ionization mass spectrometry. Electronic structure calculations unveil the potential of these model hybrid junctions for application in controlled charge-transport experiments on substrate surfaces.

The distinct O2 quenching mechanism between fluorescence and phosphorescence for dyes adsorbed on silica gel.

We herein aim to probe the emission quenched by O2 on silica gel. Our special focus is on the O2 quenching of the fluorescence of a series of organic D-π-A phosphonium compounds 1-3. The results show that the O2 quenching rate constants for the fluorescence of 1-3 are on the order of 1010 M-1 s-1, which are nearly on the same order as those measured for 1-3 and common organic compounds in solution. In yet another approach, the study of O2 quenching of phosphorescence in the solid phase indicates that the O2 quenching rate constant for the triplet state, i.e., , is smaller than by two orders of magnitude. Detailed investigation indicates that this distinction stems from the intrinsic O2 quenching rate constants for the singlet and triplet states subsequent to the formation of collisional complexes. In the absence of the solvent cage effect, is greatly influenced by the formation energy of the O2-dye CT complex, whereas in the solid phase is a nearly diffusion-controlled rate. Due to the larger distinction between and in the solid phase, O2 quenching of fluorescence is efficient for dyes in the solid phase. This leads to a feasible application of sensing O2 with regular fluorescent dyes adsorbed on porous solid substrates.

Intramolecular Phosphacyclization: Polyaromatic Phosphonium P-Heterocycles with Wide-Tuning Optical Properties.

Rationally designed cationic phospha-polyaromatic fluorophores were prepared through intramolecular cyclization of the tertiary ortho-(acene)phenylene-phosphines mediated by CuII triflate. As a result of phosphorus quaternization, heterocyclic phosphonium salts 1 c-3 c, derived from naphthalene, phenanthrene, and anthracene cores, exhibited very intense blue to green fluorescence (Φem =0.38-0.99) and high photostability in aqueous medium. The structure-emission relationship was further investigated by tailoring the electron-donating functions to the anthracene moiety to give dyes 4 c-6 c with charge-transfer character. The latter significantly decreases the emission energy to reach near-IR region. Thus, the intramolecular phosphacyclization renders an ultra-wide tuning of fluorescence from 420 nm (1 c) to 780 nm (6 c) in solution, extended to 825 nm for 6 c in the solid state with quantum efficiency of approximately 0.07. The physical behavior of these new dyes was studied spectroscopically, crystallographically, and electrochemically, whereas computational analysis was used to correlate the experimental data with molecular electronic structures. The excellent stability, water solubility, and attractive photophysical characteristics make these phosphonium heterocycles powerful tools in cell imaging.

Oligophosphine-thiocyanate Copper(I) and Silver(I) Complexes and Their Borane Derivatives Showing Delayed Fluorescence.

The series of chelating phosphine ligands, which contain bidentate P2 (bis[(2-diphenylphosphino)phenyl] ether, DPEphos; 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene, Xantphos; 1,2-bis(diphenylphosphino)benzene, dppb), tridentate P3 (bis(2-diphenylphosphinophenyl)phenylphosphine), and tetradentate P4 (tris(2-diphenylphosphino)phenylphosphine) ligands, was used for the preparation of the corresponding dinuclear [M(µ2-SCN)P2]2 (M = Cu, 1, 3, 5; M = Ag, 2, 4, 6) and mononuclear [CuNCS(P3/P4)] (7, 9) and [AgSCN(P3/P4)] (8, 10) complexes. The reactions of P4 with silver salts in a 1:2 molar ratio produce tetranuclear clusters [Ag2(µ3-SCN)(t-SCN)(P4)]2 (11) and [Ag2(µ3-SCN)(P4)]22+ (12). Complexes 7-11 bearing terminally coordinated SCN ligands were efficiently converted into derivatives 13-17 with the weakly coordinating -SCN:B(C6F5)3 isothiocyanatoborate ligand. Compounds 1 and 5-17 exhibit thermally activated delayed fluorescence (TADF) behavior in the solid state. The excited states of thiocyanate species are dominated by the ligand to ligand SCN → π(phosphine) charge transfer transitions mixed with a variable contribution of MLCT. The boronation of SCN groups changes the nature of both the S1 and T1 states to (L + M)LCT d,p(M, P) → π(phosphine). The localization of the excited states on the aromatic systems of the phosphine ligands determines a wide range of luminescence energies achieved for the title complexes (λem varies from 448 nm for 1 to 630 nm for 10c). The emission of compounds 10 and 15, based on the P4 ligand, strongly depends on the solid-state packing (λem = 505 and 625 nm for two crystalline forms of 15), which affects structural reorganizations accompanying the formation of electronically excited states.

Supramolecular Construction of Cyanide-Bridged ReI Diimine Multichromophores.

The reactions of labile [Re(diimine)(CO)3(H2O)]+ precursors (diimine = 2,2'-bipyridine, bpy; 1,10-phenanthroline, phen) with dicyanoargentate anion produce the dirhenium cyanide-bridged compounds [{Re(diimine)(CO)3}2CN)]+ (1 and 2). Substitution of the axial carbonyl ligands in 2 for triphenylphosphine gives the derivative [{Re(phen)(CO)2(PPh3)}2CN]+ (3), while the employment of a neutral metalloligand [Au(PPh3)(CN)] affords heterobimetallic complex [{Re(phen)(CO)3}NCAu(PPh3)]+ (4). Furthermore, the utilization of [Au(CN)2]-, [Pt(CN)4]2-, and [Fe(CN)6]4-/3- cyanometallates leads to the higher nuclearity aggregates [{Re(diimine)(CO)3NC} xM] m+ (M = Au, x = 2, 5 and 6; Pt, x = 4, 7 and 8; Fe, x = 6, 9 and 10). All novel compounds were characterized crystallographically. Assemblies 1-8 are phosphorescent both in solution and in the solid state; according to the DFT analysis, the optical properties are mainly associated with charge transfer from Re tricarbonyl motif to the diimine fragment. The energy of this process can be substantially modified by the properties of the ancillary ligands that allows to attain near-IR emission for 3 (λem = 737 nm in CH2Cl2). The Re-FeII/III complexes 9 and 10 are not luminescent but exhibit low energy absorptions, reaching 846 nm (10) due to ReI → FeIII transition.

Reactions of Cyclometalated Platinum(II) [Pt(N∧C)(PR3)Cl] Complexes with Imidazole and Imidazole-Containing Biomolecules: Fine-Tuning of Reactivity and Photophysical Properties via Ligand Design.

This work describes interaction of a family of [Pt(N∧C)(PR3)Cl] complexes with imidazole (Im), possible application of this chemistry for regioselective labeling of proteins through imidazole rings of histidine residues and employment of the resulting phosphorescent products in bioimaging. It was found that the complexes containing aliphatic phosphines display reversible substitution of chloride ligand for imidazole function that required considerable excess of imidazole to obtain full conversion into the substituted [Pt(ppy)(PR3)(Im)] product, whereas the substitution in the complexes with aromatic phosphines readily proceeds in 1:1.5 mixture of reagents. Rapid, selective, and quantitative coordination of imidazole to the platinum complexes enabled regioselective labeling of ubiquitin. X-ray protein crystallography of the {[Pt(ppy)(PPh3)]/ubiquitin} conjugate revealed direct bonding of the platinum center to unique histidine-68 residue through the nitrogen atom of imidazole function, the coordination being also supported by noncovalent interaction of the ligands with the protein secondary structure. The variations of the cyclometalating N∧C ligands gave a series of [Pt(N∧C)(PPh3)Cl] complexes (N∧C = 2-phenylpyridine, 2-(benzofuran-3-yl)pyridine, 2-(benzo[b]thiophen-3-yl)pyridine, methyl-2-phenylquinoline-4-carboxylate), which were used to investigate the impact of N∧C-ligand onto photophysical properties of the imidazole complexes and conjugates with human serum albumin (HSA). The chloride ligand substitution for imidazole and formation of the conjugates results in ignition of the platinum chromophore luminescence with substantially higher quantum yield in the latter case. Variation of the metalating N∧C-ligand made possible the shift of the emission to the red region of visible spectrum for both types of the products. Cell-viability tests revealed low cytotoxicity of all {[Pt(N∧C)(PPh3)Cl]/HSA} conjugates, while PLIM experiments demonstrated their high potential for oxygen sensing.

A Facile Molecular Machine: Optically Triggered Counterion Migration by Charge Transfer of Linear Donor-π-Acceptor Phosphonium Fluorophores.

The D-π-A type phosphonium salts in which electron acceptor (A=-+ PR3 ) and donor (D=-NPh2 ) groups are linked by polarizable π-conjugated spacers show intense fluorescence that is classically ascribed to excited-state intramolecular charge transfer (ICT). Unexpectedly, salts with π=-(C6 H4 )n - and -(C10 H6 C6 H4 )- exhibit an unusual dual emission (F1 and F2 bands) in weakly polar or nonpolar solvents. Time-resolved fluorescence studies show a successive temporal evolution from the F1 to F2 emission, which can be rationalized by an ICT-driven counterion migration. Upon optically induced ICT, the counterions move from -+ PR3 to -NPh2 and back in the ground state, thus achieving an ion-transfer cycle. Increasing the solvent polarity makes the solvent stabilization dominant, and virtually stops the ion migration. Providing that either D or A has ionic character (by static ion-pair stabilization), the ICT-induced counterion migration should not be uncommon in weakly polar to nonpolar media, thereby providing a facile avenue for mimicking a photoinduced molecular machine-like motion.

Luminescence Thermochromism of Gold(I) Phosphane-Iodide Complexes: A Rule or an Exception?

A series of gold(I) iodide complexes 1-11 have been prepared from di-, tri-, and tetraphosphane ligands. Crystallographic studies reveal that the di- (1-7) and tetrametallic (11) compounds feature linearly coordinated gold(I) ions with short aurophilic contacts. Their luminescence behavior is determined by the combined influence of the phosphane properties, metal-metal interaction, and intermolecular lattice-defined interactions. The proposed variable contribution of 3 (X+M)-centered (X=halogen; M=metal) and 3 XLCT (halogen to ligand charge transfer) electronic transitions into the lowest lying excited state, which is influenced by supramolecular packing, is presumably responsible for the alteration of room-temperature emission color from green (λ=545 nm, for 11) to near-IR (λ=698 nm, for 2). Dinuclear compounds 6 and 7 exhibit distinct luminescence thermochromism with a blueshift up to 5750 cm-1 upon cooling. Such dramatic change of emission energy is assigned to the presence of two coupled triplet excited states of 3 ππ* and 3 (X+M)C/3 XLCT nature, the presence of which depends on both molecular structure and the crystal lattice arrangement.

Cyanide-Assembled d10 Coordination Polymers and Cycles: Excited State Metallophilic Modulation of Solid-State Luminescence.

The series of cyanide-bridged coordination polymers [(P2 )CuCN]n (1), [(P2 )Cu{M(CN)2 }]n (M=Cu 3, Ag 4, Au 5) and molecular tetrametallic clusters [{(P4 )MM'(CN)}2 ]2+ (MM'=Cu2 6, Ag2 7, AgCu 8, AuCu 9, AuAg 10) were obtained using the bidentate P2 and tetradentate P4 phosphane ligands (P2 =1,2-bis(diphenylphosphino)benzene; P4 =tris(2-diphenylphosphinophenyl)phosphane). All title complexes were crystallographically characterized to reveal a zig-zag chain arrangement for 1 and 3-5, whereas 6-10 possess metallocyclic frameworks with different degree of metal-metal bonding. The d10 -d10 interactions were evaluated by the quantum theory of atoms in molecules (QTAIM) computational approach. The photophysical properties of 1-10 were investigated in the solid state and supported by theoretical analysis. The emission of compounds 1 and 3-5, dominated by metal-to-ligand charge transfer (MLCT) transitions located within {CuP2 } motifs, is compatible with thermally activated delayed fluorescence (TADF) behaviour and a small energy gap between the T1 and S1 excited states. The luminescence characteristics of 6-10 are strongly dependent on the composition of the metal core; the emission band maxima vary in the range 484-650 nm with quantum efficiency reaching 0.56 (6). The origin of the emission for 6-8 and 10 at room temperature is assigned to delayed fluorescence. AuCu cluster 9, however, exhibits only phosphorescence that corresponds to theoretically predicted large value ΔE(S1 -T1 ). DFT simulation highlights a crucial impact of metallophilic bonding on the nature and energy of the observed emission, the effect being greatly enhanced in the excited state.