JRC GMO-Matrix: a web application to support Genetically Modified Organisms detection strategies.

BACKGROUND: The polymerase chain reaction (PCR) is the current state of the art technique for DNA-based detection of Genetically Modified Organisms (GMOs). A typical control strategy starts by analyzing a sample for the presence of target sequences (GM-elements) known to be present in many GMOs. Positive findings from this "screening" are then confirmed with GM (event) specific test methods. A reliable knowledge of which GMOs are detected by combinations of GM-detection methods is thus crucial to minimize the verification efforts. DESCRIPTION: In this article, we describe a novel platform that links the information of two unique databases built and maintained by the European Union Reference Laboratory for Genetically Modified Food and Feed (EU-RL GMFF) at the Joint Research Centre (JRC) of the European Commission, one containing the sequence information of known GM-events and the other validated PCR-based detection and identification methods. The new platform compiles in silico determinations of the detection of a wide range of GMOs by the available detection methods using existing scripts that simulate PCR amplification and, when present, probe binding. The correctness of the information has been verified by comparing the in silico conclusions to experimental results for a subset of forty-nine GM events and six methods. CONCLUSIONS: The JRC GMO-Matrix is unique for its reliance on DNA sequence data and its flexibility in integrating novel GMOs and new detection methods. Users can mine the database using a set of web interfaces that thus provide a valuable support to GMO control laboratories in planning and evaluating their GMO screening strategies. The platform is accessible at http://gmo-crl.jrc.ec.europa.eu/jrcgmomatrix/ .

The 3T3 neutral red uptake phototoxicity test: practical experience and implications for phototoxicity testing--the report of an ECVAM-EFPIA workshop.

This is the report from the "ECVAM-EFPIA workshop on 3T3 NRU Phototoxicity Test: Practical Experience and Implications for Phototoxicity Testing", jointly organized by ECVAM and EFPIA and held on the 25-27 October 2010 in Somma Lombardo, Italy. The European Centre for the Validation of Alternative Methods (ECVAM) was established in 1991 within the European Commission Joint Research, based on a Communication from the European Commission (1991). The main objective of ECVAM is to promote the scientific and regulatory acceptance of alternative methods which are of importance to the biosciences and which reduce, refine and replace the use of laboratory animals. The European Federation of Pharmaceuticals Industries and Association (EFPIA) represent the pharmaceutical industry operating in Europe. Through its direct membership of 31 national associations and 40 leading pharmaceutical companies, EFPIA is the voice on the EU scene of 2200 companies committed to researching, developing and bringing to patients new medicines that improve health and the quality of life around the world. The workshop, co-chaired by Joachim Kreysa (ECVAM) and Phil Wilcox (GSK, EFPIA) involved thirty-five experts from academia, regulatory authorities and industry, invited to contribute with their experiences in the field of phototoxicology. The main objectives of the workshop were: -to present 'in use' experience of the pharmaceutical industry with the 3T3 Neutral Red Uptake Phototoxicity Test (3T3 NRU-PT), -to discuss why it differs from the results in the original validation exercise, -to discuss technical issues and consider ways to improve the usability of the 3T3 NRU-PT for (non-topical) pharmaceuticals, e.g., by modifying the threshold of chemical light absorption to trigger photo-toxicological testing, and by modifying technical aspects of the assay, or adjusting the criteria used to classify a positive response. During the workshop, the assay methodology was reviewed by comparing the OECD Test Guideline (TG 432) with the protocols used in testing laboratories, data from EFPIA and JPMA 'surveys' were presented and possible reasons for the outcomes were discussed. Experts from cosmetics and pharmaceutical industries reported on their experience with the 3T3 NRU-PT and evidence was presented for phototoxic clinical symptoms that could be linked to certain relevant molecules. Brainstorming sessions discussed if the 3T3 NRU-PT needed to be improved and whether alternatives to the 3T3 NRU-PT exist. Finally, the viewpoint from EU and US regulators was presented. In the final session, the conclusions of the meeting were summarized, with action points. It was concluded that the 3T3 NRU-PT identifies phototoxicological hazards with a 100% sensitivity, and thus is accepted as the tier one test that correctly identifies the absence of phototoxic potential. Consequently, positive results in the 3T3 NRU-PT often do not translate into a clinical phototoxicity risk. Possible ways to improve the practical use of this assay include: (i) adaptation of changed UV/vis-absorption criteria as a means to reduce the number of materials tested, (ii) reduction of the highest concentration to be tested, and (iii) consideration of modifying the threshold criteria for the prediction of a positive call in the test.

Regulatory assessment of in vitro skin corrosion and irritation data within the European framework: Workshop recommendations.

Validated in vitro methods for skin corrosion and irritation were adopted by the OECD and by the European Union during the last decade. In the EU, Switzerland and countries adopting the EU legislation, these assays may allow the full replacement of animal testing for identifying and classifying compounds as skin corrosives, skin irritants, and non irritants. In order to develop harmonised recommendations on the use of in vitro data for regulatory assessment purposes within the European framework, a workshop was organized by the Swiss Federal Office of Public Health together with ECVAM and the BfR. It comprised stakeholders from various European countries involved in the process from in vitro testing to the regulatory assessment of in vitro data. Discussions addressed the following questions: (1) the information requirements considered useful for regulatory assessment; (2) the applicability of in vitro skin corrosion data to assign the corrosive subcategories as implemented by the EU Classification, Labelling and Packaging Regulation; (3) the applicability of testing strategies for determining skin corrosion and irritation hazards; and (4) the applicability of the adopted in vitro assays to test mixtures, preparations and dilutions. Overall, a number of agreements and recommendations were achieved in order to clarify and facilitate the assessment and use of in vitro data from regulatory accepted methods, and ultimately help regulators and scientists facing with the new in vitro approaches to evaluate skin irritation and corrosion hazards and risks without animal data.

Report of the EPAA-ECVAM workshop on the validation of Integrated Testing Strategies (ITS).

The use of Integrated Testing Strategies (ITS) permits the combination of diverse types of chemical and toxicological data for the purposes of hazard identification and characterisation. In November 2008, the European Partnership for Alternative Approaches to Animal Testing (EPAA), together with the European Centre for the Validation of Alternative Methods (ECVAM), held a workshop on Overcoming Barriers to Validation of Non-animal Partial Replacement Methods/Integrated Testing Strategies, in Ispra, Italy, to discuss the extent to which current ECVAM approaches to validation can be used to evaluate partial replacement in vitro test methods (i.e. as potential ITS components) and ITS themselves. The main conclusions of these discussions were that formal validation was only considered necessary for regulatory purposes (e.g. the replacement of a test guideline), and that current ECVAM approaches to validation should be adapted to accommodate such test methods. With these conclusions in mind, a follow-up EPAA-ECVAM workshop was held in October 2009, to discuss the extent to which existing validation principles are applicable to the validation of ITS test methods, and to develop a draft approach for the validation of such test methods and/or overall ITS for regulatory purposes. This report summarises the workshop discussions that started with a review of the current validation methodologies and the presentation of two case studies (skin sensitisation and acute toxicity), before covering the definition of ITS and their components, including their validation and regulatory acceptance. The following main conclusions/recommendations were made: that the validation of a partial replacement test method (for application as part of a testing strategy) should be differentiated from the validation of an in vitro test method for application as a stand-alone replacement, especially with regard to its predictive capacity; that, in the former case, the predictive capacity of the whole testing strategy (rather than of the individual test methods) would be more important, especially if the individual test methods had a high biological relevance; that ITS allowing for flexible and ad hoc approaches cannot be validated, whereas the validation of clearly defined ITS would be feasible, although practically quite difficult; and that test method developers should be encouraged to develop and submit to ECVAM not only full replacement test methods, but also partial replacement methods to be placed as parts of testing strategies. The added value from the formal validation of testing strategies, and the requirements needed in view of regulatory acceptance of the data, require further informed discussion within the EPAA forum on the basis of case studies provided by industry.

Alternative (non-animal) methods for cosmetics testing: current status and future prospects-2010.

The 7th amendment to the EU Cosmetics Directive prohibits to put animal-tested cosmetics on the market in Europe after 2013. In that context, the European Commission invited stakeholder bodies (industry, non-governmental organisations, EU Member States, and the Commission's Scientific Committee on Consumer Safety) to identify scientific experts in five toxicological areas, i.e. toxicokinetics, repeated dose toxicity, carcinogenicity, skin sensitisation, and reproductive toxicity for which the Directive foresees that the 2013 deadline could be further extended in case alternative and validated methods would not be available in time. The selected experts were asked to analyse the status and prospects of alternative methods and to provide a scientifically sound estimate of the time necessary to achieve full replacement of animal testing. In summary, the experts confirmed that it will take at least another 7-9 years for the replacement of the current in vivo animal tests used for the safety assessment of cosmetic ingredients for skin sensitisation. However, the experts were also of the opinion that alternative methods may be able to give hazard information, i.e. to differentiate between sensitisers and non-sensitisers, ahead of 2017. This would, however, not provide the complete picture of what is a safe exposure because the relative potency of a sensitiser would not be known. For toxicokinetics, the timeframe was 5-7 years to develop the models still lacking to predict lung absorption and renal/biliary excretion, and even longer to integrate the methods to fully replace the animal toxicokinetic models. For the systemic toxicological endpoints of repeated dose toxicity, carcinogenicity and reproductive toxicity, the time horizon for full replacement could not be estimated.

Overcoming barriers to validation of non-animal partial replacement methods/Integrated Testing Strategies: the report of an EPAA-ECVAM workshop.

The use of Integrated Testing Strategies (ITS) in toxicological hazard identification and characterisation is becoming increasingly common as a method for enabling the integration of diverse types of toxicology data. At present, there are no existing procedures and guidelines for the construction and validation of ITS, so a joint EPAA WG5-ECVAM workshop was held with the following objectives: a) to investigate the role of ITS and the need for validation of ITS in the different industry sectors (pharmaceuticals, cosmetics, chemicals); b) to formulate a common definition of ITS applicable across different sectors; c) to explore how and when Three Rs methods are used within ITS; and d) to propose a validation rationale for ITS and for alternative methods that are foreseen to be used within ITS. The EPAA provided a platform for comparing experiences with ITS across different industry sectors. It became clear that every ITS has to be adapted to the product type, R&D stage, and regulatory context. However, common features of ITS were also identified, and this permitted the formulation of a general definition of ITS in a regulatory context. The definition served as a basis for discussing the needs, rationale and process of formal ITS validation. One of the main conclusions was that a formal validation should not be required, unless the strategy will serve as full replacement of an in vivo study used for regulatory purposes. Finally, several challenges and bottlenecks to the ITS validation were identified, and it was agreed that a roadmap on how to address these barriers would be established by the EPAA partners.

Baseline Practices for the Application of Genomic Data Supporting Regulatory Food Safety.

The application of new data streams generated from next-generation sequencing (NGS) has been demonstrated for food microbiology, pathogen identification, and illness outbreak detection. The establishment of best practices for data integrity, reproducibility, and traceability will ensure reliable, auditable, and transparent processes underlying food microbiology risk management decisions. We outline general principles to guide the use of NGS data in support of microbiological food safety. Regulatory authorities across intra- and international jurisdictions can leverage this effort to promote the reliability, consistency, and transparency of processes used in the derivation of genomic information for regulatory food safety purposes, and to facilitate interactions and the transfer of information in the interest of public health.

Molecular characterization of an unauthorized genetically modified Bacillus subtilis production strain identified in a vitamin B2 feed additive.

Many food and feed additives result from fermentation of genetically modified (GM) microorganisms. For vitamin B2 (riboflavin), GM Bacillus subtilis production strains have been developed and are often used. The presence of neither the GM strain nor its recombinant DNA is allowed for fermentation products placed on the EU market as food or feed additive. A vitamin B2 product (80% feed grade) imported from China was analysed. Viable B. subtilis cells were identified and DNAs of two bacterial isolates (LHL and LGL) were subjected to three whole genome sequencing (WGS) runs with different devices (MiSeq, 454 or HiSeq system). WGS data revealed the integration of a chloramphenicol resistance gene, the deletion of the endogenous riboflavin (rib) operon and presence of four putative plasmids harbouring rib operons. Event- and construct-specific real-time PCR methods for detection of the GM strain and its putative plasmids in food and feed products have been developed.

Development and applicability of a ready-to-use PCR system for GMO screening.

With the growing number of GMOs introduced to the market, testing laboratories have seen their workload increase significantly. Ready-to-use multi-target PCR-based detection systems, such as pre-spotted plates (PSP), reduce analysis time while increasing capacity. This paper describes the development and applicability to GMO testing of a screening strategy involving a PSP and its associated web-based Decision Support System. The screening PSP was developed to detect all GMOs authorized in the EU in one single PCR experiment, through the combination of 16 validated assays. The screening strategy was successfully challenged in a wide inter-laboratory study on real-life food/feed samples. The positive outcome of this study could result in the adoption of a PSP screening strategy across the EU; a step that would increase harmonization and quality of GMO testing in the EU. Furthermore, this system could represent a model for other official control areas where high-throughput DNA-based detection systems are needed.

Towards Plant Species Identification in Complex Samples: A Bioinformatics Pipeline for the Identification of Novel Nuclear Barcode Candidates.

Monitoring of the food chain to fight fraud and protect consumer health relies on the availability of methods to correctly identify the species present in samples, for which DNA barcoding is a promising candidate. The nuclear genome is a rich potential source of barcode targets, but has been relatively unexploited until now. Here, we show the development and use of a bioinformatics pipeline that processes available genome sequences to automatically screen large numbers of input candidates, identifies novel nuclear barcode targets and designs associated primer pairs, according to a specific set of requirements. We applied this pipeline to identify novel barcodes for plant species, a kingdom for which the currently available solutions are known to be insufficient. We tested one of the identified primer pairs and show its capability to correctly identify the plant species in simple and complex samples, validating the output of our approach.

JRC GMO-Amplicons: a collection of nucleic acid sequences related to genetically modified organisms.

The DNA target sequence is the key element in designing detection methods for genetically modified organisms (GMOs). Unfortunately this information is frequently lacking, especially for unauthorized GMOs. In addition, patent sequences are generally poorly annotated, buried in complex and extensive documentation and hard to link to the corresponding GM event. Here, we present the JRC GMO-Amplicons, a database of amplicons collected by screening public nucleotide sequence databanks by in silico determination of PCR amplification with reference methods for GMO analysis. The European Union Reference Laboratory for Genetically Modified Food and Feed (EU-RL GMFF) provides these methods in the GMOMETHODS database to support enforcement of EU legislation and GM food/feed control. The JRC GMO-Amplicons database is composed of more than 240 000 amplicons, which can be easily accessed and screened through a web interface. To our knowledge, this is the first attempt at pooling and collecting publicly available sequences related to GMOs in food and feed. The JRC GMO-Amplicons supports control laboratories in the design and assessment of GMO methods, providing inter-alia in silico prediction of primers specificity and GM targets coverage. The new tool can assist the laboratories in the analysis of complex issues, such as the detection and identification of unauthorized GMOs. Notably, the JRC GMO-Amplicons database allows the retrieval and characterization of GMO-related sequences included in patents documentation. Finally, it can help annotating poorly described GM sequences and identifying new relevant GMO-related sequences in public databases. The JRC GMO-Amplicons is freely accessible through a web-based portal that is hosted on the EU-RL GMFF website. Database URL: http://gmo-crl.jrc.ec.europa.eu/jrcgmoamplicons/.

International ring trial for the validation of an event-specific Golden Rice 2 quantitative real-time polymerase chain reaction method.

This article describes the international validation of the quantitative real-time polymerase chain reaction (PCR) detection method for Golden Rice 2. The method consists of a taxon-specific assay amplifying a fragment of rice Phospholipase D α2 gene, and an event-specific assay designed on the 3' junction between transgenic insert and plant DNA. We validated the two assays independently, with absolute quantification, and in combination, with relative quantification, on DNA samples prepared in haploid genome equivalents. We assessed trueness, precision, efficiency, and linearity of the two assays, and the results demonstrate that both the assays independently assessed and the entire method fulfill European and international requirements for methods for genetically modified organism (GMO) testing, within the dynamic range tested. The homogeneity of the results of the collaborative trial between Europe and Asia is a good indicator of the robustness of the method.

Development, optimization, and single laboratory validation of an event-specific real-time PCR method for the detection and quantification of Golden Rice 2 using a novel taxon-specific assay.

In this study, we developed, optimized, and in-house validated a real-time PCR method for the event-specific detection and quantification of Golden Rice 2, a genetically modified rice with provitamin A in the grain. We optimized and evaluated the performance of the taxon (targeting rice Phospholipase D α2 gene)- and event (targeting the 3' insert-to-plant DNA junction)-specific assays that compose the method as independent modules, using haploid genome equivalents as unit of measurement. We verified the specificity of the two real-time PCR assays and determined their dynamic range, limit of quantification, limit of detection, and robustness. We also confirmed that the taxon-specific DNA sequence is present in single copy in the rice genome and verified its stability of amplification across 132 rice varieties. A relative quantification experiment evidenced the correct performance of the two assays when used in combination.

Geographical BSE risk assessment and its impact on disease detection and dissemination.

Bovine Spongiform Encephalopathy (BSE) rapidly evolved into an issue of major public concern particularly when, in 1996, evidence was provided that this disease had crossed the species barrier and infected humans in the UK with what has become known as "variant Creutzfeldt Jakob Disease" (vCJD). The aim of this paper is to describe the European Geographical BSE risk assessment (GBR) that was successfully used for assessing the qualitative likelihood that BSE could be present in a country where it was not yet officially recognized. It also discusses how this can lead to risk-based and therefore preventive management of BSE at national and international levels. The basic assumption of the GBR method is that the BSE agent is initially introduced into a country's domestic cattle production system through the importation of contaminated feedstuffs or live cattle. This is referred to as an "external challenge". The ability of the system to cope with such a challenge is, in turn, referred to as its "stability": a stable system will not allow the BSE agent to propagate and amplify following its introduction, while an unstable system will. The BSE-status of a country assessed by this system was used by the European Commission as the basis for trade legislation rules for cattle and their products. The GBR was an invaluable tool in evaluating the potential global spread of BSE as it demonstrated how a disease could be transferred through international trade. This was shown to be a critical factor to address in reducing the spread and amplification of BSE throughout the world. Furthermore, GBR resulted in the implementation of additional measures and management activities both to improve surveillance and to prevent transmission within the cattle population.

Proposal for a Brazilian centre on alternative test methods.

Several initiatives have recently taken place in Brazil in order to foster the creation of centers dedicated to alternatives to animal testing. In 2008, Vanessa Sá-Rocha organized a meeting with Brazilian regulatory authorities and the major stakeholders in the field of testing to foster discussions on the process of funding, development, and validation of alternative methods in Brazil. Octavio Presgrave published a scientific article on "The Need for the Establishment of a Brazilian Centre for the Validation of Alternative Methods." Also in 2008, Jadir Nunes, together with Dermeval de Carvalho, prepared and presented a proposal to the Brazilian National Agency of Health Surveillance (ANVISA) for the creation of a Centre for the Validation of Alternative Methods. ECVAM and other European stakeholders have been involved in the initiatives. Furthermore, also in 2008, a new legislation has been adopted in Brazil regarding the use of animals for scientific purposes ("lei Arouca"). The legislation establishes, among other provisions, the task of monitoring and evaluating the introduction of alternative methods. However, the legislation does not provide for promotion of or information about, existing alternative methods to the larger Brazilian scientific community. In order to streamline the different activities, Chantra Eskes acted as a facilitator by establishing a new joint proposal with the current Brazilian stakeholders, aimed at setting up a Brazilian Center on Alternative Test Methods.