Toward an Ultimate Solution for Peptide Retention Time Prediction: The Effect of Column Temperature on Separation Selectivity.

We studied the effect of the column temperature on the selectivity of reversed-phase peptide separation in bottom-up proteomics. The number of peptide identifications from 2 h liquid chromatography with tandem mass spectrometry (LC-MS/MS) acquisitions reaches a plateau at 45-55 °C, driven simultaneously by improved separation efficiency, a gradual decrease in peptide retention, and possible on-column degradation of peptides at elevated temperatures. Performing 2D LC-MS/MS acquisitions at 25, 35, 45, and 55 °C resulted in the identification of ∼100,000 and ∼120,000 unique peptides for nonmodified and tandem mass tags (TMT)-labeled samples, respectively. These peptide collections were used to investigate the temperature-driven retention features. The latter is governed by the specific temperature response of individual residues, peptide hydrophobicity and length, and amphipathic helicity. On average, peptide retention decreased by 0.56 and 0.5% acetonitrile for each 10 °C increase for label-free and TMT-labeled peptides, respectively. This generally linear response of retention shifts allowed the extrapolation of predictive models beyond the studied temperature range. Thus, (trap) column cooling from room temperature to 0 °C will allow the retention of an additional 3% of detectable tryptic peptides. Meanwhile, the application of 90 °C would result in the loss of ∼20% of tryptic peptides that were amenable to MS/MS-based identification.

Paradigm Shift: Major Role of Ion-Pairing-Dependent Size Exclusion Effects in Bottom-Up Proteomics Reversed-Phase Peptide Separations.

Can reversed-phase peptide retention be the same for C8 and C18 columns? or increase for otherwise identical columns with a smaller surface area? Can replacing trifluoroacetic acid (TFA) with formic acid (FA) improve the peak shape? According to our common understanding of peptide chromatography, absolutely not. Surprisingly, a thorough comparison of the peptide separation selectivity of 100 and 120 Šfully porous C18 sorbents to maximize the performance of our in-house proteomics LC-MS/MS setup revealed an unexpectedly higher peptide retentivity for a wider pore packing material, despite it having a smaller surface area. Concurrently, the observed increase in peptide retention─which drives variation in separation selectivity between 100 and 120 Špore size materials─was more pronounced for smaller peptides. These findings contradict the central dogmas that underlie the development of all peptide RP-HPLC applications: (i) a larger surface area leads to higher retention and (ii) increasing the pore size should benefit the retention of larger analytes. Based on our intriguing findings, we compared reversed-phase high-performance liquid chromatography peptide retention for a total of 20 columns with pore sizes between 60 and 300 Šusing FA- and TFA-based eluents. Our results unequivocally attest that the larger size of ion pairs in FA- vs TFA-based eluents leads to the observed impact on selectivity and peptide retention. For FA, peptide retention peaks at 200 Špore size, compared to between 120 and 200 Šfor TFA. However, the decrease in retention for narrow-pore particles is more profound in FA. Our findings suggest that common assumptions about analyte size and accessible surface area should be revisited for ion-pair RP separation of small peptides, typical for proteomic applications that are predominantly applying FA eluents. Hybrid silica-based materials with pore sizes of 130-200 Šshould be specifically targeted for bottom-up proteomic applications to obtain both superior peak shape and peptide retentivity. This challenging task of attaining the best RPLC column for proteomics calls for closer collaboration between LC column manufacturers and proteomic LC specialists.

Compendium of Chromatographic Behavior of Post-translationally and Chemically Modified Peptides in Bottom-Up Proteomic Experiments.

We have systematically evaluated the chromatographic behavior of post-translationally/chemically modified peptides using data spanning over 70 of the most relevant modifications. These retention properties were measured for standard bottom-up proteomic settings (fully porous C18 separation media, 0.1% formic acid as ion-pairing modifier) using collections of modified/nonmodified peptide pairs. These pairs were generated by spontaneous degradation, chemical or enzymatic treatment, analysis of synthetic peptides, or the cotranslational incorporation of noncanonical proline analogues. In addition, these measurements were validated using external data acquired for synthetic peptides and enzymatically induced citrullination. Working in units of hydrophobicity index (HI, % ACN) and evaluating the average retention shifts (ΔHI) represent the simplest approach to describe the effect of modifications from a didactic point of view. Plotting HI values for modified (y-axis) vs nonmodified (x-axis) counterparts generates unique slope and intercept values for each modification defined by the chemistry of the modifying moiety: its hydrophobicity, size, pKa of ionizable groups, and position of the altered residue. These composition-dependent correlations can be used for coarse incorporation of PTMs into models for prediction of peptide retention. More accurate predictions would require the development of specific sequence-dependent algorithms to predict ΔHI values.

Retention Time Prediction for TMT-Labeled Peptides in Proteomic LC-MS Experiments.

We present the first detailed study of chromatographic behavior of peptides labeled with tandem mass tags (TMT and TMTpro) in 2D LC for proteomic applications. Carefully designed experimental procedures have permitted generating data sets of over 100,000 nonlabeled and TMT-labeled peptide pairs for the low pH RP in the second separation dimension and data sets of over 10,000 peptide pairs for high-pH RP, HILIC (amide and silica), and SCX separations in the first separation dimension. The average increase in peptide RPLC (0.1% formic acid) retention upon TMT labeling was found to be 3.3% acetonitrile (linear water/acetonitrile gradients), spanning a range of -4 to 10.3%. In addition to the bulk peptide properties such as length, hydrophobicity, and the number of labeled residues, we found several sequence-dependent features mostly associated with differences in N-terminal chemistry. The behavior of TMTpro-labeled peptides was found to be very similar except for a slightly higher hydrophobicity: an average retention shift of 3.7% acetonitrile. The respective versions of the sequence-specific retention calculator (SSRCalc) model have been developed to accommodate both TMT chemistries, showing identical prediction accuracy (R2 ∼ 0.98) for labeled and nonlabeled peptides. Higher retention for TMT-labeled peptides was observed for high-pH RP and HILIC separations, while SCX selectivity remained virtually unchanged.

Reversed-Phase Liquid Chromatography of Peptides for Bottom-Up Proteomics: A Tutorial.

The performance of the current bottom-up liquid chromatography hyphenated with mass spectrometry (LC-MS) analyses has undoubtedly been fueled by spectacular progress in mass spectrometry. It is thus not surprising that the MS instrument attracts the most attention during LC-MS method development, whereas optimizing conditions for peptide separation using reversed-phase liquid chromatography (RPLC) remains somewhat in its shadow. Consequently, the wisdom of the fundaments of chromatography is slowly vanishing from some laboratories. However, the full potential of advanced MS instruments cannot be achieved without highly efficient RPLC. This is impossible to attain without understanding fundamental processes in the chromatographic system and the properties of peptides important for their chromatographic behavior. We wrote this tutorial intending to give practitioners an overview of critical aspects of peptide separation using RPLC to facilitate setting the LC parameters so that they can leverage the full capabilities of their MS instruments. After briefly introducing the gradient separation of peptides, we discuss their properties that affect the quality of LC-MS chromatograms the most. Next, we address the in-column and extra-column broadening. The last section is devoted to key parameters of LC-MS methods. We also extracted trends in practice from recent bottom-up proteomics studies and correlated them with the current knowledge on peptide RPLC separation.

Confident Identification of Citrullination and Carbamylation Assisted by Peptide Retention Time Prediction.

The chromatographic behavior of peptides carrying citrulline and homocitrulline residues in proteomic two-dimensional (2D) liquid chromatography-mass spectrometry (LC-MS) experiments has been investigated. The primary goal of this study was to determine the chromatographic conditions that allow differentiating between arginine citrullination and deamidation of asparagine based on retention data, improving the confidence of MS-based identifications. Carbamylation was used as a reference point due to a high degree of similarity between modification products and anticipated changes in chromatographic behavior. We applied 2D LC-MS/MS (a high-pH-low-pH reversed phase (RP), hydrophilic interaction liquid chromatography (HILIC)-low-pH RP, and strong cation exchange (SCX)-low-pH RP) to acquire retention data for modified-nonmodified peptide pairs in the four separation modes. Modifications of a standard protein mixture were induced enzymatically (PAD-2) or chemically (urea) for citrullination and carbamylation, respectively. Deamidation occurs spontaneously. Similar retention shifts were observed for all three modifications in a high-pH RP (decrease) and a low-pH RP (increase), thus limiting the applicability of this 2D LC combination. HILIC on bare silica and strong cation exchange separations have been probed to amplify the effect of charge loss upon citrullination, with SCX demonstrating the most differentiating power: the elimination of basic residues upon citrullination/carbamylation results in an ∼58 mM KCl retention decrease, while retention of deamidated products decreases slightly.

Analysis of the Yarrowia lipolytica proteome reveals subtle variations in expression levels between lipogenic and non-lipogenic conditions.

Oleaginous yeasts have the ability to store greater than 20% of their mass as neutral lipids, in the form of triacylglycerides. The ATP citrate lyase is thought to play a key role in triacylglyceride synthesis, but the relationship between expression levels of this and other related enzymes is not well understood in the role of total lipid accumulation conferring the oleaginous phenotype. We conducted comparative proteomic analyses with the oleaginous yeast, Yarrowia lipolytica, grown in either nitrogen-sufficient rich media or nitrogen-limited minimal media. Total proteins extracted from cells collected during logarithmic and late stationary growth phases were analyzed by 1D liquid chromatography, followed by mass spectroscopy. The ATP citrate lyase enzyme was expressed at similar concentrations in both conditions, in both logarithmic and stationary phase, but many upstream and downstream enzymes showed drastically different expression levels. In non-lipogenic conditions, several pyruvate enzymes were expressed at higher concentration. These enzymes, especially the pyruvate decarboxylase and pyruvate dehydrogenase, may be regulating carbon flux away from central metabolism and reducing the amount of citrate being produced in the mitochondria. While crucial for the oleaginous phenotype, the constitutively expressed ATP citrate lyase appears to cleave citrate in response to carbon flux upstream from other enzymes creating the oleaginous phenotype.

Separation Orthogonality in Liquid Chromatography-Mass Spectrometry for Proteomic Applications: Comparison of 16 Different Two-Dimensional Combinations.

Peptide separation orthogonality for 16 different 2D LC-ESI MS systems has been evaluated. To compare and contrast the behavior of the first dimension columns, a large proteomic retention data set of ∼30 000 tryptic peptides was collected for each 2D pairing. The selection of the first dimension system was made to cover the most popular peptide separation modes applied in proteomics: reversed-phase (RP) separations with different pH, hydrophilic interaction liquid chromatography (HILIC), strong cation and anion exchange (SCX, SAX), and mixed-mode separations. The separation orthogonality generally increases in the order RP < SCX < HILIC < SAX, with the exception of high pH RP-low pH RP system, which showed the second best orthogonality value (68%), just behind PolySAX LP column (74%). The identification output of the 2D LC-MS/MS system is driven by both separation orthogonality and efficiency, making high pH RP the best choice for the first dimension separation. Its performance in combination with a standard C18 at acidic pH can be increased further through the application of pairwise fraction concatenation. The effect of the latter has been evaluated using in silico fraction concatenation, which has been proven to show improvement only for RP separations in the first dimension. Concatenation of two, three, and four-five fractions into one is shown to be the most effective for high pH RP and HFBA- and TFA-based C18 separations, respectively. We also suggest simple guidelines for the unbiased determination of dissimilarity for two separation dimensions and evaluate separation orthogonality in 3D LC-LC-MS separation space for all systems under investigation.

Peptide separation selectivity in proteomics LC-MS experiments: Comparison of formic and mixed formic/heptafluorobutyric acids ion-pairing modifiers.

Separation selectivity and detection sensitivity of reversed-phase high-performance liquid chromatography with tandem mass spectrometry analyses were compared for formic (0.1%) and formic/heptafluorobutyric (0.1%/0.005%) acid based eluents using a proteomic data set of ∼12 000 paired peptides. The addition of a small amount of hydrophobic heptafluorobutyric acid ion-pairing modifier increased peptide retention by up to 10% acetonitrile depending on peptide charge, size, and hydrophobicity. Retention increase was greatest for peptides that were short, highly charged, and hydrophilic. There was an ∼3.75-fold reduction in MS signal observed across the whole population of peptides following the addition of heptafluorobutyric acid. This resulted in ∼36% and ∼21% reduction of detected proteins and unique peptides for the whole cell lysate digests, respectively. We also confirmed that the separation selectivity of the formic/heptafluorobutyric acid system was very similar to the commonly used conditions of 0.1% trifluoroacetic acid, and developed a new version of the Sequence-Specific Retention calculator model for the formic/heptafluorobutyric acid system showing the same ∼0.98 R2 -value accuracy as the Sequence-Specific Retention calculator formic acid model. In silico simulation of peptide distribution in separation space showed that the addition of 0.005% heptafluorobutyric acid to the 0.1% formic acid system increased potential proteome coverage by ∼11% of detectable species (tryptic peptides ≥ four amino acids).

Capillary Zone Electrophoresis-Tandem Mass Spectrometry for Large-Scale Phosphoproteomics with the Production of over 11,000 Phosphopeptides from the Colon Carcinoma HCT116 Cell Line.

Phosphoproteomics requires better separation of phosphopeptides to boost the coverage of the phosphoproteome. We argue that an alternative separation method that produces orthogonal phosphopeptide separation to the widely used LC needs to be considered. Capillary zone electrophoresis (CZE) is one important alternative because CZE and LC are orthogonal for phosphopeptide separation and because the migration time of peptides in CZE can be accurately predicted. In this work, we coupled strong cation exchange (SCX)-reversed-phase LC (RPLC) to CZE-MS/MS for large-scale phosphoproteomics of the colon carcinoma HCT116 cell line. The CZE-MS/MS-based platform identified 11,555 phosphopeptides. The phosphopeptide data set is at least 100% larger than that from previous CZE-MS/MS studies and will be a valuable resource for building a model for predicting the migration time of phosphopeptides in CZE. Phosphopeptides migrate significantly slower than corresponding unphosphopeptides under acidic conditions of CZE separations and in a normal polarity. According to our modeling data, phosphorylation decreases peptide's charge roughly by one charge unit, resulting in dramatic decrease in electrophoretic mobility. Preliminary investigations demonstrate that electrophoretic mobility of phosphopeptides containing one phosphoryl group can be predicted with the same accuracy as for nonmodified peptides ( R2 ≈ 0.99). The CZE-MS/MS and LC-MS/MS were complementary in large-scale phosphopeptide identifications and produced different phosphosite motifs from the HCT116 cell line. The data highlight the value of CZE-MS/MS for phosphoproteomics as a complementary separation approach for not only improving the phosphoproteome coverage but also providing more insight into the phosphosite motifs.

Genomic comparison of facultatively anaerobic and obligatory aerobic Caldibacillus debilis strains GB1 and Tf helps explain physiological differences.

Caldibacillus debilis strains GB1 and Tf display distinct phenotypes. Caldibacillus debilis GB1 is capable of anaerobic growth and can synthesize ethanol while C. debilis Tf cannot. Comparison of the GB1 and Tf genome sequences revealed that the genomes were highly similar in gene content and showed a high level of synteny. At the genome scale, there were several large sections of DNA that appeared to be from lateral gene transfer into the GB1 genome. Tf did have unique genetic content but at a much smaller scale: 300 genes in Tf verses 857 genes in GB1 that matched at ≤90% sequence similarity. Gene complement and copy number of genes for the glycolysis, tricarboxylic acid cycle, and electron transport chain pathways were identical in both strains. While Tf is an obligate aerobe, it possesses the gene complement for an anaerobic lifestyle (ldh, ak, pta, adhE, pfl). As a species, other strains of C. debilis should be expected to have the potential for anaerobic growth. Assaying the whole cell lysate for alcohol dehydrogenase activity revealed an approximately 2-fold increase in the enzymatic activity in GB1 when compared with Tf.

A metabolic and genomic assessment of sugar fermentation profiles of the thermophilic Thermotogales, Fervidobacterium pennivorans.

A metabolic, genomic and proteomic assessment of Fervidobacterium pennivorans strains was undertaken to clarify the metabolic and genetic capabilities of this Thermotogales species. The type strain Ven5 originally isolated from a hot mud spa in Italy, and a newly isolated strain (DYC) from a hot spring at Ngatamariki, New Zealand, were compared for metabolic and genomic differences. The fermentation profiles of both strains on cellobiose generated similar major end products (acetate, alanine, glutamate, H2, and CO2). The vast majority of end products produced were redox neutral, and carbon balances were in the range of 95-115%. Each strain showed distinct fermentation profiles on sugar substrates. The genome of strain DYC was sequenced and shown to have high sequence similarity and synteny with F. pennivorans Ven5 genome, suggesting they are the same species. The unique genome regions in Ven5, corresponded to genes involved in the Entner-Doudoroff pathway confirming our observation of DYC's inability to utilize gluconate. Genome analysis was able to elucidate pathways involved in production of the observed end-products with the exception of alanine and glutamate synthesis which were resolved with less clarity due to poor sequence identity and missing critical enzymes within the pathway, respectively.

Description of a cryptic thermophilic (pro)phage, CBP1 from Caldibacillus debilis strain GB1.

This study characterizes a cryptic (pro)phage-related sequence within the Caldibacillus debilis GB1 genome, designated CBP1.CBP1 is a Siphoviridae-like genome highly related to GBVS1 from Geobacillus sp. 6k51. The CBP1genome is a 37,315 bp region containing 69 putative ORFs with a GC content of 42% flanked on both sides by host DNA integrated into the main bacterial chromosome (contig 16). Bioinformatic analyses identified cassettes of genes within the CBP1 genome that were similar in function, yet distinct in sequence, from genes previously identified in GBVS1. All of CBP1 genes had less than 60% amino acid sequence identity with GBVS1by tBLASTx, with the exception of the TMP repeat gene. CBP1 possessed all the necessary genes to undergo a temperate/lytic phage life cycle, including excision, replication, structural genes, DNA packaging, and cell lyses. Proteomic analysis of CBP1 revealed the expression of 5 proteins. One of the expressed proteins was a transcriptional regulator protein homologous to the bacteriophage λ repressor protein (cI) expressed in high amounts from the CBP1 region, consistent with a lysogenic phage in a repressed state. The CBP1 protein expression profile during host growth provides unique insight into thermophilic Siphoviridae-like phages in the repressed state within their host cells.

Investigating Acquisition Performance on the Orbitrap Fusion When Using Tandem MS/MS/MS Scanning with Isobaric Tags.

Methods for isobaric-tagged peptide analysis (e.g., TMT, iTRAQ), such as the synchronous precursor selection (SPS) tandem MS/MS/MS (MS3) approach, enable maintenance of reporter ion accuracy and precision by reducing the ratio compression caused by coisolated precursor ions. However, the decreased throughput of the MS3 approach necessitates careful optimization of acquisition strategies and methods to ensure maximal proteome coverage. We present a systematic analysis of acquisition parameters used to analyze isobaric-tagged peptide samples on current generation Orbitrap mass spectrometer (MS) hardware. In contrast with previously reported works, we demonstrate the limited utility of acquiring reporter ion data in the ion trap analyzer; ion trap acquisition had only a minimal increase in identification depth and reduced quantification precision. We establish that despite the significantly increased scan rate afforded through the use of higher energy collisional dissociation (HCD) in MS3-based ion trap isobaric tag analyses, the reduced quantification precision and reporter ion yields negate the potential benefits in proteome coverage. Lastly, using optimized parameter sets, we further demonstrate the limited utility of the ion trap detector versus the Orbitrap for reporter ion detection in an in-depth analysis of a complex proteome sample. Together, these data will serve as a valuable resource to researchers undertaking analysis on current generation Orbitrap instrumentation with isobaric tags.

Evaluating the Characteristics of Reporter Ion Signal Acquired in the Orbitrap Analyzer for Isobaric Mass Tag Proteome Quantification Experiments.

Multiplexed quantification with isobaric chemical tags (e.g., TMT, iTRAQ) provides a robust and efficient means to comparatively examine proteome dynamics between several biological states using a mass spectrometer (MS). The quantitative nature of isobaric tags necessitates strict validation of the observed ion signals in the chosen MS detector before differential patterns are extracted between biological states. We present an in-depth analysis of isobaric tag data acquired on current generation Orbitrap MS hardware to illustrate pitfalls in acquisition settings that can negatively impact results. We establish, for the first time, the presence of a notch, a region of no observed values, in the reporter ion distributions from isobaric-labeled peptide mixtures acquired on these instruments. We determine that this notch is present in published data across a wide range of instruments of the same or different type and is isolated to the Orbitrap mass analyzer. We demonstrate that the impact of the notch can be minimized using manipulations of Orbitrap scan parameters and on-column injection amounts. Lastly, using a mixture of synthetic standard peptides we investigated the impact on identification rates and quantification precision. Together, these data highlight an important phenomenon that negatively impacts peptide identification and quantification in the Orbitrap analyzer as well as outlining guidelines to follow to ensure minimization of MS-induced artifacts in isobaric tag experiments resulting from the notch.

A deletion variant partially complements a porin-less strain of Neurospora crassa.

Mitochondrial porin, the voltage-dependent anion channel, plays an important role in metabolism and other cellular functions within eukaryotic cells. To further the understanding of porin structure and function, Neurospora crassa wild-type porin was replaced with a deletion variant lacking residues 238-242 (238porin). 238porin was assembled in the mitochondrial outer membrane, but the steady state levels were only about 3% of those of the wild-type protein. The strain harbouring 238porin displayed cytochrome deficiencies and expressed alternative oxidase. Nonetheless, it exhibited an almost normal linear growth rate. Analysis of mitochondrial proteomes from a wild-type strain FGSC9718, a strain lacking porin (ΔPor-1), and one expressing only 238porin, revealed that the major differences between the variant strains were in the levels of subunits of the NADH:ubiquinone oxidoreductase (complex I) of the electron transport chain, which were reduced only in the ΔPor-1 strain. These, and other proteins related to electron flow and mitochondrial biogenesis, are differentially affected by relative porin levels.

Peptide Retention Time Prediction in Hydrophilic Interaction Liquid Chromatography: Data Collection Methods and Features of Additive and Sequence-Specific Models.

The development of a peptide retention prediction model for hydrophilic interaction liquid chromatography (XBridge Amide column) is described for a collection of ∼40 000 tryptic peptides. Off-line 2D LC-MS/MS analysis (HILIC-RPLC) of S. cerevisiae whole cell lysate has been used to acquire retention information for a HILIC separation. The large size of the optimization data set (more than 2 orders of magnitude compared to previous reports) permits the accurate assignment of hydrophilic retention coefficients of individual amino acids, establishing both the effects of amino acid position relative to peptide termini and the influence of peptide secondary structure in HILIC. The accuracy of a simple additive model with peptide length correction (R2 value of ∼0.96) was found to be much higher compared to an algorithm of similar complexity applied to RPLC (∼0.91). This indicates significantly smaller influence of peptide secondary structure and interactions with counterions in HILIC. Nevertheless, sequence-specific features were found. Helical peptides that tend to retain stronger than predicted in RPLC exhibit negative prediction errors using an additive HILIC model. N-cap helix stabilizing motifs, which increase retention of amphipathic helical peptides in RP, reduce peptide retention in HILIC independently of peptide amphipathicity. Peptides carrying multiple Pro and Gly (residues with lowest helical propensity) retain stronger than predicted. We conclude that involvement of the peptide backbone's carbonyl and amide groups in hydrogen-bond stabilization of helical structures is a major factor, which determines sequence-dependent behavior of peptides in HILIC. The incorporation of observed sequence dependent features into our Sequence-Specific Retention Calculator HILIC model resulted in 0.98 R2 value correlation, significantly exceeding the predictive performance of all RP and HILIC models developed for complex mixtures of tryptic peptides.

Sequence-Specific Model for Peptide Retention Time Prediction in Strong Cation Exchange Chromatography.

The development of a peptide retention prediction model for strong cation exchange (SCX) separation on a Polysulfoethyl A column is reported. Off-line 2D LC-MS/MS analysis (SCX-RPLC) of S. cerevisiae whole cell lysate was used to generate a retention dataset of ∼30 000 peptides, sufficient for identifying the major sequence-specific features of peptide retention mechanisms in SCX. In contrast to RPLC/hydrophilic interaction liquid chromatography (HILIC) separation modes, where retention is driven by hydrophobic/hydrophilic contributions of all individual residues, SCX interactions depend mainly on peptide charge (number of basic residues at acidic pH) and size. An additive model (incorporating the contributions of all 20 residues into the peptide retention) combined with a peptide length correction produces a 0.976 R2 value prediction accuracy, significantly higher than the additive models for either HILIC or RPLC. Position-dependent effects on peptide retention for different residues were driven by the spatial orientation of tryptic peptides upon interaction with the negatively charged surface functional groups. The positively charged N-termini serve as a primary point of interaction. For example, basic residues (Arg, His, Lys) increase peptide retention when located closer to the N-terminus. We also found that hydrophobic interactions, which could lead to a mixed-mode separation mechanism, are largely suppressed at 20-30% of acetonitrile in the eluent. The accuracy of the final Sequence-Specific Retention Calculator (SSRCalc) SCX model (∼0.99 R2 value) exceeds all previously reported predictors for peptide LC separations. This also provides a solid platform for method development in 2D LC-MS protocols in proteomics and peptide retention prediction filtering of false positive identifications.

Predicting Electrophoretic Mobility of Tryptic Peptides for High-Throughput CZE-MS Analysis.

A multiparametric sequence-specific model for predicting peptide electrophoretic mobility has been developed using large-scale bottom-up proteomic CE-MS data (5% (∼0.8M) acetic acid as background electrolyte). Peptide charge (Z) and size (molecular mass, M) are the two major factors determining electrophoretic mobility, in complete agreement with previous studies. The extended size of the data set (>4000 peptides) permits access to many sequence-specific factors that impact peptide mobility. The presence of acidic residues Asp and Glu near the peptide N-terminus is by far the most prominent among them. The induction effect of the side chain of N-terminal Asp reduces the basicity of the N-terminal amino group and, as hence, its charge, by ∼0.27 units, lowering mobility. The correlation of the model (R2 ∼ 0.995) indicates that the peptide separation process in CZE is relatively simple and can be predicted to a much higher precision than current RP-HPLC models. Similar to RP-HPLC prediction studies, we anticipate future developments that introduce peptide migration standards, collect larger data sets for modeling through the alignment of multiple CZE-MS acquisitions, and study of the behavior of peptides carrying post-translational modifications. The increased size of data sets will also permit investigation of the fine-scale effects of peptide secondary structure on peptide mobility. We observed that peptides with higher helical propensity tend to have higher than predicted electrophoretic mobility; the incorporation of these features into CZE migration models will require significantly larger data sets.

Comparison of peptide retention prediction algorithm in reversed-phase chromatography. Comment on "Predictive chromatography of peptides and proteins as a complementary tool for proteomics", by I. A. Tarasova, C. D. Masselon, A. V. Gorshkov and M. V. Gorshkov, Analyst, 2016, 141, 4816.

In a recent mini-review, Tarasova et al. (Analyst, 2016, 141, 4816) compared several peptide retention prediction models for reversed-phase HPLC developed for applied proteomics. The mechanism of peptide retention in RP-HPLC is very complex. Peptide separation selectivity is affected by multiple parameters of a separation system. Consequently, proper comparison of the models requires a detailed knowledge (to provide the best match) of separation conditions used to acquire both optimization and test datasets. Sequence-specific retention calculator - a benchmark tool in this field - consistently provides 0.96-0.965 R2-value correlations between experimental and predicted retention values, when applied correctly to extremely complex mixtures of peptides.