Additive-anchored thermoresponsive nanoscale self-assembly generation in normal and reverse Tetronics®.

Self-assembly of ethylene oxide (EO)-propylene oxide (PO)-based star-shaped block copolymers (BCPs) in the presence of different kinds of additives is investigated in an aqueous solution environment. Commercially available four-armed BCPs, namely Tetronics® (normal: T904 with EO as the terminal end block; and reverse: T90R4 with PO as the terminal end block), each with 40%EO, are used. The effect of various additives such as electrolytes (NaCl and Na2SO4), nonelectrolyte polyols (glucose and sorbitol), and ionic surfactants (viz. anionic-sodium dodecyl sulfate (SDS), cationic-dodecyltrimethylammonium bromide (DTAB) and zwitterionic dodecyldimethylammonium propane sulfonate (C12PS)) on these BCPs is examined to observe their influence on micellization behaviour. The presence of salts and polyols displayed interesting phase behaviour, i.e., the cloud point (CP) was decreased, the water structure was affected and the micelles were dehydrated by expelling water molecules, and thus they were likely to promote micelle formation/growth. In contrast, ionic surfactants in small amounts interacted with the BCPs and showed an increase in CPs thereby forming mixed micelles with increasing charges and decreasing micellar sizes, finally transforming to small surfactant-rich mixed micelles. Molecular interactions such as electrostatic and hydrogen bonding involved within the examined entities are put forth employing a computational simulation approach using the Gaussian 09 window for calculation along with the GaussView 5.0.9 programming software using the (DFT)/B3LYP method and 3-21G basis set. The hydrodynamic diameter (Dh) of the micelles is examined using dynamic light scattering (DLS), while the various micellar parameters inferring the shape/geometry are obtained using small-angle neutron scattering (SANS) by the best fitting of the structure factors. It is observed that 10 w/v% T904 remains as spherical micelles with some micellar growth under physiological conditions (37 °C), while 10 w/v% T90R4 remains as unimers and forms spherical micelles in the presence of additives at 37 °C. Furthermore, the additive-induced micellar systems are tested as developing nanovehicles for anticancer (curcumin, Cur) drug solubilization using UV-vis spectroscopy, which shows a prominent increase in absorbance with enhanced solubilization capacity. Additionally, the cytotoxic effect of Cur loaded on the BCP micelles in HeLa cells is studied through confocal microscopy by capturing fluorescence images that depict HeLa cell growth inhibition under the influence of additive-induced micellar systems.

Rationalizing the Design of Pluronics-Surfactant Mixed Micelles through Molecular Simulations and Experiments.

Aqueous systems comprising polymers and surfactants are technologically important complex fluids with tunable features dependent on the chemical nature of each constituent, overall composition in mixed systems, and solution conditions. The phase behavior and self-assembly of amphiphilic polymers can be changed drastically in the presence of conventional ionic surfactants and need to be clearly understood. Here, the self-aggregation dynamics of a triblock copolymer (Pluronics L81, EO3PO43EO3) in the presence of three cationic surfactants (with a 12C long alkyl chain but with different structural features), viz., dodecyltrimethylammonium bromide (DTAB), didodecyldimethylammonium bromide (DDAB), and ethanediyl-1,2-bis(dimethyldodecylammonium bromide) (12-2-12), were investigated in an aqueous solution environment. The nanoscale micellar size expressed as hydrodynamic diameter (Dh) of copolymer-surfactant mixed aggregates was evaluated using dynamic light scattering, while the presence of a varied micellar geometry of L81-cationic surfactant mixed micelles were probed using small-angle neutron scattering. The obtained findings were further validated from molecular dynamics (MD) simulations, employing a simple and transferable coarse-grained molecular model based on the MARTINI force field. L81 remained molecularly dissolved up to ∼20 °C but phase separated, forming turbid/translucent dispersion, close to its cloud point (CP) and existed as unstable vesicles. However, it exhibited interesting solution behavior expressed in terms of the blue point (BP) and the double CP in the presence of different surfactants, leading to mixed micellar systems with a triggered morphology transition from unstable vesicles to polymer-rich micelles and cationic surfactant-rich micelles. Such an amendment in the morphology of copolymer nanoaggregates in the presence of cationic surfactants has been well observed from scattering data. This is further rationalized employing the MD approach, which validated the effective interactions between Pluronics-cationic surfactant mixed micelles. Thus, our experimental results integrated with MD yield a deep insight into the nanoscale interactions controlling the micellar aggregation (Pluronics-rich micelles and surfactant-rich micelles) in the investigated mixed system.

Salt induced micellization conduct in PEO-PPO-PEO-based block copolymers: a thermo-responsive approach.

The nanoscale self-assembly behavior in ethylene oxide (EO) and propylene oxide (PO)-based block copolymers (BCPs) commercially available as Pluronics®: L44 (PEO10-PPO23-PEO10) and F77 (PEO53-PPO34-PEO53) is put forth in aqueous solution and in the presence of sodium salts NaCl and Na2SO4. The moderate hydrophilicity of L44 is attributed to its low molecular weight PPO segment, while the high percentage of PEO content in F77 contributes to its extreme hydrophilicity. The impact of sodium salts (NaCl and Na2SO4) on the self-assembly is investigated to understand their influence and role in micellization, by employing various physicochemical techniques such as phase behavior conduct, calorimetry, tensiometry, scattering, and spectral analysis. The results indicate that at a low temperature range of 20-30 °C, Pluronics® solutions with a concentration of 10% w/v remain molecularly dissolved as individual units called unimers (Gaussian chain), which have a hydrodynamic size (Dh) of approximately 4-6 nm. Additionally, loose clusters of a few hundred nanometers in size are also observed. Though, at higher concentrations of BCPs and in the presence of salt or elevated temperatures, the examined micellar structures exhibit a higher degree of organization i.e., spherical or ellipsoidal in terms of size and shape. Also, the solubilization enhancement of a hydrophobic dye called orange OT within the examined micellar system is also undertaken using a spectral approach.

Micellar assembly leading to structural growth/transition in normal and reverse Tetronics® in single and mixed solution environment.

This study scrutinizes the self-association of ethylene oxide (EO)-propylene oxide (PO)-based star-shaped block copolymers as normal Tetronic® (T904) and reverse Tetronic® R (T90R4) with varying molecular characteristics and different hydrophilic-hydrophobic ratios in an aqueous solution environment. These thermo-responsive solutions appear clear, transparent or bluish up to 10%w/v, which anticipated the probable transition of unimers to spherical or ellipsoidal micelles which is complemented by scattering experiments. In a single-solution environment, 10%w/v T904 formed star-shaped micelles at ambient temperature and exhibited a micellar growth/transition with temperature ageing. While 10%w/v T90R4 exists as unimers or a Gaussian coil over a wide range of temperature. Very interestingly, close to the cloud point (CP) flower-shaped spherical and ellipsoidal micelles were formed. A similar proposed micellar scheme was also examined for mixed systems T904 : T90R4 in varying ratios (1 : 0, 3 : 1, 1 : 1, 1 : 3 and 0 : 1) giving an account to the solution behavior of the mixtures. An amalgamation of dynamic light scattering (DLS) and small-angle neutron scattering (SANS) techniques achieved the thorough extraction of the structural parameters of the micellar system. The hydrodynamic diameter (Dh) of the micelles with temperature variation was evaluated from dynamic light scattering (DLS) while the structure factor of the micelles was found by employing small-angle neutron scattering (SANS). Furthermore, the single and mixed micellar systems were quantitatively and qualitatively examined for anticancer drug solubilization using UV-vis spectroscopy for their superior use as potential nanocargos.

Glucose-induced self-assembly and phase separation in hydrophilic triblock copolymers and the governing mechanism.

Poly(ethylene oxide, EO)-poly(propylene oxide, PO)-poly(ethylene oxide, EO)-based triblock copolymers (BCPs) with 80% hydrophilicity stay molecularly dissolved as Gaussian chains at ambient temperature, even at fairly high concentrations (>5 %w/v). This study presents the plausible micellization behaviour of such very-hydrophilic Pluronics® - F38, F68, F88, F98, and F108 - incited upon the addition of glucose at low concentrations and temperatures. The outcomes obtained from phase behaviour and scattering studies are described. At temperatures near to ambient temperature, these BCPs form micelles with a central core made of a PO block, surrounded by a corona of highly hydrated EO chains. The phase transitions in these hydrophilic Pluronics® in the presence of glucose are demonstrated via the dehydration of the copolymer coil, leading to a decrease in the I1/I3 ratio, as determined using fluorescence spectroscopy. The temperature-dependent cloud point (CP) showed a marked decrease with an increase in the PO molecular weight and also in the presence of glucose. The change in solution relative viscosity (ηrel) caused by glucose is due to the enhanced dehydration of the EO block of the BCP amphiphile. Dynamic light scattering (DLS) and small-angle neutron scattering (SANS) investigations suggested that the dimensions of the hydrophobic core increase during the dehydration of the EO-PO blocks upon a temperature increase or after adding varying concentrations of glucose, thereby resulting in a micellar shape transition. It has been observed that added glucose influences the phase behaviour of BCPs in an analogous way to the influence of temperature. Also, plausible interactions between the EO-PO blocks and glucose were suggested based on the evaluated optimized descriptors obtained from a computational simulation approach. In addition, the core-shell blended micelles obtained using these BCPs are successfully utilized for drug (curcumin, Cur) solubilization based on the observed peak intensities from UV-visible spectroscopy. The loading of Cur into glucose-containing and glucose-free hydrophilic Pluronic® micelles shows how the radius of the micellar core (Rc) increases in the presence of glucose, thereby indicating Cur solubility enhancement for the Pluronic® micelles. Various kinetics models were employed, demonstrating a drug release profile that enables this approach to be used as an ideal platform for drug delivery.

Tuning Cationic Micelle Properties with an Antioxidant Additive: A Molecular Perspective.

In this work, we characterize the micellization and morphology transition induced in aqueous cetyltrimethylammonium bromide (CTAB) solution by the addition of the antioxidant propyl gallate (PG) using tensiometry, rheology, and small-angle neutron scattering (SANS) techniques combined with the molecular dynamics (MD) simulation approach. The adsorption of CTAB at the air-water interface in the presence of varying [PG] revealed a progressive decrease in the critical micelle concentration (CMC), while the changes in different interfacial parameters indicated enhancement of the hydrophobicity induced by PG in the CTAB micellar system. The dynamic rheology behavior indicated an increase in the flow viscosity (η) as a function of [PG]. Moreover, the rheological components (storage modulus, G', and loss modulus, G″) depicted the viscoelastic features. SANS measurements depicted the existence of ellipsoidal micelles with varying sizes and aggregation number (Nagg) as a function of [PG] and temperature. Computational simulation performed using density functional theory (DFT) calculations and molecular dynamics (MD) provided an insight into the atomic composition of the examined system. The molecular electrostatic potential (MEP) analysis depicted a close proximity of CTAB, i.e., emphasized favorable interactions between the quaternary nitrogen of CTAB and the hydroxyl group of the PG monomer, further validated by the two-dimensional nuclear Overhauser enhancement spectroscopy (2D-NOESY), which showed the penetration of PG inside the CTAB micelles. In addition, various dynamic properties, viz., the radial distribution function (RDF), the radius of gyration (Rg), and solvent-accessible surface area (SASA), showed a significant microstructural evolution of the ellipsoidal micelles in the examined CTAB-PG system, where the changes in the micellar morphology with a more elongated hydrophobic chain and the increased Rg and SASA values indicated the notable intercalation of PG in the CTAB micelles.

Contrasting effect of 1-butanol and 1,4-butanediol on the triggered micellar self-assemblies of C16-type cationic surfactants.

The self-assembly in aqueous solutions of three quaternary salt-based C16-type cationic surfactants with different polar head groups and identical carbon alkyl chain viz., cetylpyridinium bromide (CPB), cetyltrimethylammonium tosylate (CTAT), and cetyltriphenylphosphonium bromide (CTPPB) in the presence of 1-butanol (BuOH) and 1,4-butanediol (BTD) was investigated using tensiometry, 2D-nuclear Overhauser enhancement spectroscopy (2D-NOESY) and small angle neutron scattering (SANS) techniques. The adsorption parameters and micellar characteristics evaluated at 303.15 K distinctly showed that BuOH promotes the mixed micelle formation while BTD interfered with the micellization phenomenon. The SANS data fitted using an ellipsoid (as derived by Hayter and Penfold using the Ornstein-Zernike equation and the mean spherical approximation) and wormlike micellar models offered an insight into the micelle size/shape and aggregation number (Nagg) in the examined systems. The evaluated descriptors presented a clear indication of the morphology transition in cationic micelles as induced by the addition of the two alcohols. We also offer an investigation into the acceptable molecular interactions governing the differences in micelle morphologies, using the non-invasive 2D-NOESY technique and molecular modeling. The experimental observations elucidated from computational simulation add novelty to this work. Giving an account to the structural complexity in the three cationic surfactants, the molecular dynamics (MD) simulation was performed for CPB micelles in an aqueous solution of alcohols that highlighted the micelle solvation and structural transition, which is further complemented in terms of critical packing parameter (PP) for the examined systems.

A comprehensive insight on H-type aggregation in Congo red-surfactant systems revealed through spectroscopic and electrochemical study unified with a simulation framework.

Interaction of an anionic diazo dye, Congo red (CR), with conventional surfactants: cetyltrimethylammonium bromide (CTAB) and Gemini surfactant: N,N'-dihexadecyl-N,N,N',N'-tetramethyl-N,N'-ethanediyl-diammonium dibromide (16-2-16), in their pre-micellar and post-micellar concentration regions has been investigated using conductometry, surface tensiometry, UV-visible spectroscopy, fluorescence spectroscopy, dynamic light scattering (DLS), cyclic voltammetry (CV) and linear sweep voltammetry (LSV) techniques. Various interfacial, micellar, band gap and electrochemical parameters are estimated at 303.15 K. The observed results are explained in terms of critical micelle concentration (CMC) of the individual surfactants and their ability to undergo aggregation in the presence of dianionic CR. It is found that the CMC of both the surfactants decreases in the presence of CR, which is attributed to the electrostatic attraction, short-range π-π stacking of CR molecules, and the hydrophobic forces operating between CR and the surfactant molecules. The spectral results for CR showed a hypsochromic (blue) shift below the CMC for both the surfactants, which indicates the resultant CR-surfactant complexation through ion-pair formation, which further inferred H-aggregation of CR in the pre-micellar region. Above the CMC, CR reverts back to its monomeric state and gets bound to the micelle. Job's method is employed to determine the stoichiometric ratio between CR and the individual surfactant. The size distribution of surfactants in the presence of CR is determined by DLS. The CV and LSV measurements were performed in the absence and presence of a varying concentration of surfactants to support the spectral findings. Diffusion coefficient (D) calculated by LSV confirmed the successive interaction between CR and surfactants. Furthermore, the CR-surfactant interaction is also elucidated by the computational simulation using the Gauss View 5.0.9 package to validate the obtained experimental findings.

Validating interfacial behaviour of surface-active ionic liquids (SAILs) with computational study integrated with biocidal and cytotoxic assessment.

Surface-active ionic liquids (SAILs) belonging to the series of N-alkylmethylimidazolium halides [C8mimX] (X = Br, Cl, and BF4) and [CnmimBr] (n = 10, 12, 14, and 16) were employed to understand the influence of hydrophobicity of alkyl chain length and the chaotropicity of counter-ions of SAILs on the micellization, antimicrobial action and cytotoxicity properties. The micellization phenomenon of SAILs in an aqueous environment was examined employing tensiometry and steady-state fluorescence spectrophotometry. The corresponding interfacial parameters viz., critical micelle concentration (CMC), effectiveness (γCMC), surface pressure (ПCMC), maximum surface excess concentration (Гmax), and the minimum area engaged per molecule (Amin) at the air-water interface were evaluated at 303.15 K. These experimental findings were monitored and geometrically optimized theoretically using Gaussian software to highlight the recent advances in this field of theoretical calculations for putative structure. The simulation descriptors correlated the micellization behavior as a function of hydrophobicity which may contribute to obtaining awareness on their ecological behavior and fate. In addition, the biological screening of all the examined SAILs was undertaken with a combined experimental and theoretical (optimized) method against bacteria and fungus. Results revealed that SAILs with the alkyl chain-length greater than C8- act as a fair antimicrobial agent against the selected microbial strain which is attributed to the enhanced degree of SAILs hydrophobicity. The cytotoxicity of these imidazolium-based SAILs was also assessed on the cervical human cell line (HeLa) using the MTT cell viability assay and the data thus obtained were subjected to statistical analysis.

Biotoxicity and tissue-specific oxidative stress induced by Gemini surfactant as a protocol on fingerlings of Cirrhinus mrigala (Ham.): An integrated experimental and theoretical methodology.

An increasing concern for Gemini surfactants (GS) based on the class alkanediyl-α-ω-bis (dimethylalkylammonium bromide) has been reported in ecotoxicological researchbecause of their estrogenic properties causing an alarm to aquatic life. In this study, we analyzed the toxic effects of the synthesized GS (12-2-12 and 16-2-16) leading to histological changes in fingerlings (kidney, gills, intestine, and liver) of Cirrhinusmrigala. Damage in the tissues in correlation with their normal architecture was observed microscopically and was manifold. The tissue-specific morphological alterations associated with somatic index (MAV- mean alteration value) were used as biomarker. The present study also highlighted the changes in the antioxidant enzymes such as superoxide dismutase (SOD) and catalase (CAT). In order to estimate the sub-lethal toxic properties of GS, the genotoxicity and cytotoxicity of GS were evaluated using blood smear assay and HeLa cell line respectively. Results of the study exhibited potential biotoxicity where GS with the highest hydrophobicity showed upper most toxicity level under different exposure time, while GS with less hydrophobic features exhibited least stressful regimeto the tested animal. The prepared GS were also examined for their biodegradability following the die-away method. The theoretical approach estimates the structural information by computational simulation.

Synergism and aggregation behaviour in an aqueous binary mixture of cationic-zwitterionic surfactants: physico-chemical characterization with molecular simulation approach.

Aqueous interactions between a cationic surfactant benzyl dimethylhexadecylammonium chloride (BDHAC) and alkyldimethylammoniopropane sulfonates (CnDAPS) based three zwitterionic surfactants n = 10, 12, and 14 (abbreviated as C10DAPS, C12DAPS and C14DAPS, respectively) were studied using tensiometry, and fluorescence spectrophotometry techniques. The critical micelle concentration degree of synergism and various other parameters such as interaction parameter (ß), activity coefficients (fm) and interfacial parameters such as surface pressure (πCMC), packing parameter (P), surface excess concentration (Γmax), surface tension at CMC (γCMC), and minimum area per molecule (Amin) were evaluated using the Regular Solution Theory (RST) of mixed systems. The results indicate a strong dependency on the mixed system and their composition. For the quantitative prediction, the molecular architecture of the surfactants in mixed systems and their synergistic interactions were investigated by computational simulation using Spartan'14 V1.1.8. The structural optimization results obtained were found to be in good agreement with the estimations made using RST. The reduction in surface tension indicates a certain efficiency in mixed micelle formation owing to electrostatic attraction between the cationic and zwitterionic surfactants. In addition, the binary surfactant systems evaluated by Maeda's approach infer the mixed micelles are thermodynamically stable. The aggregation number (Nagg) appeared to be larger at the composition point where the efficiency of mixed micelle formation is greatest. The strength of the interaction between BDHAC and CnDAPS followed the order: C14DAPS > C12DAPS > C10DAPS indicating a greater synergism at 0.25 molar ratio of zwitterionic surfactants to cationic surfactants in the aqueous solution at 303.15 K.

Degradable Polymeric Bio(nano)materials and Their Biomedical Applications: A Comprehensive Overview and Recent Updates.

Degradable polymers (both biomacromolecules and several synthetic polymers) for biomedical applications have been promising very much in the recent past due to their low cost, biocompatibility, flexibility, and minimal side effects. Here, we present an overview with updated information on natural and synthetic degradable polymers where a brief account on different polysaccharides, proteins, and synthetic polymers viz. polyesters/polyamino acids/polyanhydrides/polyphosphazenes/polyurethanes relevant to biomedical applications has been provided. The various approaches for the transformation of these polymers by physical/chemical means viz. cross-linking, as polyblends, nanocomposites/hybrid composites, interpenetrating complexes, interpolymer/polyion complexes, functionalization, polymer conjugates, and block and graft copolymers, are described. The degradation mechanism, drug loading profiles, and toxicological aspects of polymeric nanoparticles formed are also defined. Biomedical applications of these degradable polymer-based biomaterials in and as wound dressing/healing, biosensors, drug delivery systems, tissue engineering, and regenerative medicine, etc., are highlighted. In addition, the use of such nano systems to solve current drug delivery problems is briefly reviewed.

Role of Unimers to Polymersomes Transition in Pluronic Blends for Controlled and Designated Drug Conveyance.

This study investigates the nanoscale self-assembly from mixtures of two symmetrical poly(ethylene oxide)-poly(propylene oxide)-pol(ethylene oxide) (PEO-PPO-PEO) block copolymers (BCPs) with different lengths of PEO blocks and similar PPO blocks. The blended BCPs (commercially known as Pluronic F88 and L81, with 80 and 10% PEO, respectively) exhibited rich phase behavior in an aqueous solution. The relative viscosity (ηrel) indicated significant variations in the flow behavior, ranging from fluidic to viscous, thereby suggesting a possible micellar growth or morphological transition. The tensiometric experiments provided insight into the intermolecular hydrophobic interactions at the liquid-air interface favoring the surface activity of mixed-system micellization. Dynamic light scattering (DLS) and small-angle neutron scattering (SANS) revealed the varied structural morphologies of these core-shell mixed micelles and polymersomes formed under different conditions. At a concentration of ≤5% w/v, Pluronic F88 exists as molecularly dissolved unimers or Gaussian chains. However, the addition of the very hydrophobic Pluronic L81, even at a much lower (<0.2%) concentration, induced micellization and promoted micellar growth/transition. These results were further substantiated through molecular dynamics (MD) simulations, employing a readily transferable coarse-grained (CG) molecular model grounded in the MARTINI force field with density and solvent-accessible surface area (SASA) profiles. These findings proved that F88 underwent micellar growth/transition in the presence of L81. Furthermore, the potential use of these Pluronic mixed micelles as nanocarriers for the anticancer drug quercetin (QCT) was explored. The spectral analysis provided insight into the enhanced solubility of QCT through the assessment of the standard free energy of solubilization (ΔG°), drug-loading efficiency (DL%), encapsulation efficiency (EE%), and partition coefficient (P). A detailed optimization of the drug release kinetics was presented by employing various kinetic models. The [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] MTT assay, a frequently used technique for assessing cytotoxicity in anticancer research, was used to gauge the effectiveness of these QCT-loaded mixed nanoaggregates.

Amphiphilic Block Copolymers: Their Structures, and Self-Assembly to Polymeric Micelles and Polymersomes as Drug Delivery Vehicles.

Self-assembly of amphiphilic block copolymers display a multiplicity of nanoscale periodic patterns proposed as a dominant tool for the 'bottom-up' fabrication of nanomaterials with different levels of ordering. The present review article focuses on the recent updates to the self-association of amphiphilic block copolymers in aqueous media into varied core-shell morphologies. We briefly describe the block copolymers, their types, microdomain formation in bulk and micellization in selective solvents. We also discuss the characteristic features of block copolymers nanoaggregates viz., polymer micelles (PMs) and polymersomes. Amphiphilic block copolymers (with a variety of hydrophobic blocks and hydrophilic blocks; often polyethylene oxide) self-assemble in water to micelles/niosomes similar to conventional nonionic surfactants with high drug loading capacity. Double hydrophilic block copolymers (DHBCs) made of neutral block-neutral block or neutral block-charged block can transform one block to become hydrophobic under the influence of a stimulus (physical/chemical/biological), and thus induced amphiphilicity and display self-assembly are discussed. Different kinds of polymer micelles (viz. shell and core-cross-linked, core-shell-corona, schizophrenic, crew cut, Janus) are presented in detail. Updates on polymerization-induced self-assembly (PISA) and crystallization-driven self-assembly (CDSA) are also provided. Polyion complexes (PICs) and polyion complex micelles (PICMs) are discussed. Applications of these block copolymeric micelles and polymersomes as nanocarriers in drug delivery systems are described.

Self-Assembly and Micellar Transition in CTAB Solutions Triggered by 1-Octanol.

This study exploits higher-order micellar transition ranging from ellipsoidal to rodlike to wormlike induced by 1-octanol (C8OH) in an aqueous solution of cetyltrimethylammonium bromide (CTAB), characterizing phase behavior, rheology, and small-angle neutron scattering (SANS). The phase diagram for the ternary system CTAB-C8OH-water was constructed, which depicted the varied solution behavior. Such performance was further inferred from the rheology study (oscillatory-shear frequency sweep (ω) and viscosity (η)) that displayed an interesting solution behavior of CTAB solutions as a function of C8OH. It was observed that at low C8OH concentrations, the solutions appeared viscous/viscoelastic fluids that changed to an elastic gel with an infinite relaxation time at higher concentrations of C8OH, thereby confirming the existence of distinct micelle morphologies. Small-angle neutron scattering (SANS) provided various micellar parameters such as aggregation numbers (Nagg) and micellar size/shape. The experimental results were further validated with a computational simulation approach. The molecular dynamic (MD) study offered an insight into the molecular interactions and aggregation behavior through different analyses, including radial distribution function (RDF), radius of gyration (Rg), and solvent-accessible surface area (SASA).

Profound implication of histological alterations, haematological responses and biocidal assessment of cationic amphiphiles unified with their molecular architecture.

The interfacial properties depicting the micellization behaviour of the cationic amphiphiles (surfactants) belonging to the class of quaternary ammonium salts varying in degree of hydrophobicity were evaluated using tensiometry, conductivity and fluorescence spectrophotometric methods at 303.15 K. The impact of the amphiphilic nature of these amphiphiles as a function of their concentration is accounted against the selective microbial strains using the well-diffusion approach. Also, its influence on the histological (shrinkage/curling of lamellae, necrosis, haemorrhage, hyperplasia of villi in gills and intestine) alterations and haematological (blood parameters) changes in fingerling of Cirrhinus mrigala (C. mrigala) offers an insight into the stern damages reported as aquatic toxicity. The lesions exhibited moderate to severe alterations that are further correlated with the semi-quantitative mean alteration value (MAV). The in vitro and in vivo findings are explained significantly in terms of amphiphilic hydrophobicity which followed the order: C16TAB > C12TAB. All the observed outcomes are rationalized by the structural assessment of the selected amphiphiles as specified by the computational simulation approach using density functional theory (DFT) with B3LYP method and 3-21G basis source set. This work also portrays the biodegradability of these cationic amphiphiles and their fate on the environment. Graphical abstract Molecular architecture of cationic amphiphiles integrated with their in vitro and in vivo rejoinders.

In vitro toxicity assessment and enhanced drug solubility profile of green deep eutectic solvent derivatives (DESDs) combined with theoretical validation.

Green solvents are actively taking over as the absolute replacement of intrinsic toxic volatile organic solvents. This is conspicuously analyzed in this study, which mentions the preparation of green deep eutectic solvent derivatives (DESDs) composed of choline chloride (ChCl) as the hydrogen bond acceptor (HBA) and two acids, viz., oxalic acid (OX) and citric acid (CA) as preliminary hydrogen bond donors (HBDs) with ethylene glycol (EG) and glycerol (GLY) as secondary HBDs in an equimolar ratio. This study exposes the vigilant choice of the type and mole ratio of HBA and HBDs, which permit the extended stability of the formulated DESDs in the liquid state even below the room temperature. The prepared DESDs were well-characterized by FT-IR spectroscopy. Furthermore, this work aimed at investigating their antimicrobial activity towards selected bacterial and fungal strains expressed in terms of viscosity measurements. The in vitro toxicity profiles in terms of cytotoxicity (human cervical cancer cell line) and genotoxicity (DNA fragmentation), which have not been reported to date, were also assessed for the prepared DESDs. Tuning the HBA and HBDs in selected DESDs for promising biological activity was found to have ethical implications. In addition, this study focused on the solubilization enhancement of the local anaesthetic drug lidocaine (LDC) in the stated DESDs as a function of water composition, and higher solubility was observed due to the fair intermolecular hydrogen bonding interactions between LDC and DESDs, which was further validated using the computational simulation approach. In addition, the electron-donating and accepting sites were depicted by 3D-molecular electrostatic potential (3D-MEP) for the examined systems. The observed variations were attributed to the changes in the solvation capacity, viscosity and ionic strength of pure DESDs as a function of water concentration. Finally, this study supports the role of dual HBDs in leading to the formation of stable DESDs with noteworthy action towards drug solubilization and a remarkable biological response.

Self-Association in EO-BO-EO Triblock Copolymers as a Nanocarrier Template for Sustainable Release of Anticancer Drugs.

Ethylene oxide (EO)-butylene oxide (BO)-ethylene oxide (EO)-based triblock copolymers with varying hydrophilic-hydrophobic ratios in arrangement, generally referred to as EBE, were scrutinized in an aqueous environment. Various self-associative (micellization) physicochemical properties of these EBEs were examined at different temperatures unified with a quantum chemical study. The salting-out effect on 5%w/v EBE was examined by observing their aqueous solution behavior where the clear transparent solution/turbidity suggested the probable presence of spherical or ellipsoidal micelles, which was confirmed from the scattering outline. The hydrodynamic radius (Dh) of the formed micellar geometry as a function of temperature and electrolyte (2 M NaCl) was inspected from dynamic light scattering and further supported by small-angle neutron scattering, where the Q-range prototype and scattering parameters were evaluated by the best fitting of the structure factor. Furthermore, these micelles were employed as potential nanocarriers for anticancer (curcumin and quercetin) drugs, where its release profile at a particular time interval was estimated using UV-vis spectroscopy. Different kinetic models were employed to fit the release profile data that enabled this study to act as an ideal platform for drug delivery. Also, the plausible interactions between EO-BO-EO blocks and the anticancer drugs were inferred from the evaluated computational descriptors.

Unraveling the solubilization and cytotoxicity study of poorly water-soluble anti-inflammatory drug in aqueous Gemini surfactants solution with physicochemical characterization and simulation study.

This work investigates the use of quaternary ammonium based Gemini surfactants (GS) to examine the solubilization and stabilization of a poorly water soluble anti-inflammatory drug Diclofenac (Df). Here we demonstrate the effect of pH on the suspension profile of Df release where it exhibits maximum solubility and absorbance at pH = 10. Interaction process of such cationic GS with Df have been systematically characterized using tensiometry and UV-vis spectroscopy techniques from pre-micellar to post-micellar regions. The spectral results revealed that all the individual GS bind on Df electrostatically resulting in GS + Df complexation. For all the three GS examined, the critical micelle concentration (CMC) was found to decrease in presence of Df following the order: 12-2-12 > 12-2-16 > 16-2-16 which inferred that 12-2-12 can effectively suppress Df degradation at very low concentration. In comparison to 12-2-12, 12-2-16 and 16-2-16 exhibited weaker interaction with Df which limits the stability/solubility of Df in their respective micelles. The aggregation behavior of Df with various GS was investigated by dynamic light scattering (DLS) method. The structural orientation of GS and Df was elucidated by molecular simulation study using Gauss View 5.0.9. The influence of the 12-2-12 in presence of Df on the cervical cell morphology has been undertaken to understand the cytotoxic effect using MTT assay.