Efficient coupling between single mode fibers and glass chip waveguides via graded refractive index fiber tips.

Coupling characteristics between a single mode fiber (SMF) and a waveguide embedded in a glass chip via a graded index fiber (GIF) tip are investigated at a wavelength of 976 nm. The GIF tips comprise a coreless fiber section and a GIF section. A depressed cladding waveguide in a ZBLAN glass chip with a core diameter of 35 µm is coupled with GIF tips that have a range of coreless fiber and GIF lengths. An experimental coupling efficiency as high as 88% is obtained while a numerical simulation predicts 92.9% for the same GIF tip configuration. Since it is measured in the presence of Fresnel reflection, it can be further improved by anti-reflection coating. Additionally, it is demonstrated that a gap can be introduced between the chip waveguide and the GIF tip while maintaining the high coupling efficiency, thus allowing a thin planar optical component to be inserted. The results presented here will enable miniaturization and simplification of photonic chips with integrated waveguides by replacing bulk coupling lenses with integrated optical fibers.

Caged-Sphere Optofluidic Sensors: Whispering Gallery Resonators in Wicking Microfluidics.

The rapid development of optofluidic technologies in recent years has seen the need for sensing platforms with ease-of-use, simple sample manipulation, and high performance and sensitivity. Herein, an integrated optofluidic sensor consisting of a pillar array-based open microfluidic chip and caged dye-doped whispering gallery mode microspheres is demonstrated and shown to have potential for simple real-time monitoring of liquids. The open microfluidic chip allows for the wicking of a thin film of liquid across an open surface with subsequent evaporation-driven flow enabling continuous passive flow for sampling. The active dye-doped whispering gallery mode microspheres placed between pillars, avoid the use of cumbersome fibre tapers to couple light to the resonators as is required for passive microspheres. The performance of this integrated sensor is demonstrated using glucose solutions (0.05-0.3 g/mL) and the sensor response is shown to be dynamic and reversible. The sensor achieves a refractive index sensitivity of ~40 nm/RIU, with Q-factors of ~5 × 103 indicating a detection limit of ~3 × 10-3 RIU (~20 mg/mL glucose). Further enhancement of the detection limit is expected by increasing the microsphere Q-factor using high-index materials for the resonators, or alternatively, inducing lasing. The integrated sensors are expected to have significant potential for a host of downstream applications, particularly relating to point-of-care diagnostics.

Design guidelines for collimating or focusing graded-index fiber tips.

Graded-index optical fiber probes suitable for focusing or collimating the output of an optical fiber at a wavelength of 1.3 µm have become an enabling technology in optical coherence tomography imaging applications for in vivo bioimaging. Such fiber tips however remain uncommon in other photonics applications. This paper provides the first numerical study of graded-index fiber tips covering a broad range of wavelengths spanning from the UV to short-infrared. The wavelength dependency and the influence of probe geometry on performance characteristics such as far-field divergence angle, spot size and working distance are analyzed. The paper yields easily accessible design guidelines for the fabrication of collimating or focusing fiber tips. Fiber collimators have considerable potential for use in free-space systems and could benefit a range of devices such as variable attenuators, dynamic wavelength equalisers and large 3D optical cross-connect switches, whereas focusing fiber tips have applications in high-resolution imaging.

Single-peak fiber Bragg gratings in suspended-core optical fibers.

Femtosecond laser inscribed fiber Bragg gratings in pure-silica suspended-core optical fibers have previously been demonstrated as a promising platform for high temperature sensing. However, the density of gratings that could be written on a single fiber was limited by undesired reflections associated with higher order modes in these high numerical aperture fibers. This resulted in a complex, broadband reflection spectrum with limited multiplexing capability. In this work we utilize modifications to the fine structure of the suspended core optical fibers to fine tune the relative confinement loss of the optical fiber modes, thus reducing the contribution from such higher order modes. The effects of these changes on mode propagation are modeled, giving a range of fibers with different confinement loss properties which can be tailored to the specific length scale of a desired application. We achieve single-peak reflections from individual fiber Bragg gratings, significantly improving performance for multipoint sensing and demonstrate this technique by writing 20 gratings onto a single fiber.

Fiber-Optic Skew Ray Sensors.

The evanescent fields along multimode fibers are usually relatively weak. To enhance the sensitivity of the resulting sensors, skew rays have been exploited for their larger number of total internal reflections and their more comprehensive spread over the fiber surface. The uniform distribution of light-matter interactions across the fiber surface facilitates high sensitivity through an increased interaction area, while mitigating the risk of laser-induced coating-material damage and photobleaching. Power-dependent measurements are less susceptible to temperature effects than interferometric techniques, and place loose requirements on the laser source. This review highlights the key developments in this area, while discussing the benefits, challenges as well as future development.

Single-frequency mid-infrared waveguide laser.

A guided-wave chip laser operating in a single longitudinal mode at 2860 nm is presented. The cavity was set in the Littman-Metcalf configuration to achieve single-frequency operation with a side-mode suppression ratio above 33 dB. The chip laser's 2 MHz linewidth on a 10 ms scale was found to be limited by mechanical fluctuations, but its Lorentzian contribution was estimated to be lower than 1 Hz using a heterodyne technique. This demonstration incorporates a high coherence source with the simplicity provided by the compactness of chip lasers.

Methane spectroscopy using a free-running chip-based dual-comb laser.

Absorption lines of methane in the 2ν3 band centered at 1650 nm were measured with a free-running mode-locked dual-comb laser based on a single erbium-doped glass chip. The laser's spectra were broadened up to 1670 nm using amplifiers and highly nonlinear fiber. A comb was used to interrogate the complex transmission spectrum of a methane-filled gas cell with an optical point spacing of 968 MHz and an interferogram (IGM) rate of 27 kHz to yield absorption lines of the R and Q branches. A 1.28 s sequence of IGMs was measured and phase-corrected using a self-sufficient correction algorithm seeded only by the IGMs. The associated transmission spectrum was then compared to HITRAN yielding residuals limited by photodetector nonlinearity.

Widely tunable, high slope efficiency waveguide lasers in a Yb-doped glass chip operating at 1 µm.

Ultrafast laser inscribed waveguide lasers can lead to highly efficient and compact optical devices. This Letter reports an average lasing efficiency of 65%±2.5% from a multi-waveguide 2.5 mol. % ytterbium-doped ZrF4-BaF2-LaF3-AlF3-NaF (Yb:ZBLAN) chip in an extended-cavity configuration. A maximum output power of 750 mW with a lasing efficiency of 68% is also achieved. A monolithic end-coupled configuration reached a maximum output power of 784 mW with a lasing efficiency of 70%. The lasing wavelength is tuned from 1001 to 1045 nm in a Littrow configured cavity. A beam propagation factor of the lowest-order transverse-mode output was routinely achieved with an M2 of 1.15.

Highly coherent free-running dual-comb chip platform.

We characterize the frequency noise performance of a free-running dual-comb source based on an erbium-doped glass chip running two adjacent mode-locked waveguide lasers. This compact laser platform, contained only in a 1.2 L volume, rejects common-mode environmental noise by 20 dB thanks to the proximity of the two laser cavities. Furthermore, it displays a remarkably low mutual frequency noise floor around 10 Hz2/Hz, which is enabled by its large-mode-area waveguides and low Kerr nonlinearity. As a result, it reaches a free-running mutual coherence time of 1 s since mode-resolved dual-comb spectra are generated even on this time scale. This design greatly simplifies dual-comb interferometers by enabling mode-resolved measurements without any phase lock.

Self-corrected chip-based dual-comb spectrometer.

We present a dual-comb spectrometer based on two passively mode-locked waveguide lasers integrated in a single Er-doped ZBLAN chip. This original design yields two free-running frequency combs having a high level of mutual stability. We developed in parallel a self-correction algorithm that compensates residual relative fluctuations and yields mode-resolved spectra without the help of any reference laser or control system. Fluctuations are extracted directly from the interferograms using the concept of ambiguity function, which leads to a significant simplification of the instrument that will greatly ease its widespread adoption and commercial deployment. Comparison with a correction algorithm relying on a single-frequency laser indicates discrepancies of only 50 attoseconds on optical timings. The capacities of this instrument are finally demonstrated with the acquisition of a high-resolution molecular spectrum covering 20 nm. This new chip-based multi-laser platform is ideal for the development of high-repetition-rate, compact and fieldable comb spectrometers in the near- and mid-infrared.

Optical Microfiber Technology for Current, Temperature, Acceleration, Acoustic, Humidity and Ultraviolet Light Sensing.

Optical microfibers possess excellent optical and mechanical properties that have been exploited for sensing. We highlight the authors' recent work in the areas of current, temperature, acceleration, acoustic, humidity and ultraviolet-light sensing based on this exquisite technology, and the advantages and challenges of using optical microfibers are discussed.

Ultrafast pulse generation in a mode-locked Erbium chip waveguide laser.

We report mode-locked ~1550 nm output of transform-limited ~180 fs pulses from a large mode-area (diameter ~50 µm) guided-wave erbium fluorozirconate glass laser. The passively mode-locked oscillator generates pulses with 25 nm bandwidth at 156 MHz repetition rate and peak-power of 260 W. Scalability to higher repetition rate is demonstrated by transform-limited 410 fs pulse output at 1.3 GHz. To understand the origins of the broad spectral output, the laser cavity is simulated by using a numerical solution to the Ginzburg-Landau equation. This paper reports the widest bandwidth and shortest pulses achieved from an ultra-fast laser inscribed waveguide laser.

Detection of microscopic defects in optical fiber coatings using angle-resolved skew rays.

Microscopic defects in optical fiber coatings can be an impending catastrophe for high-power fiber laser and telecommunications systems and are difficult to detect with conventional methods. We demonstrate a highly sensitive interrogation technique that can readily identify faults such as microscopic nicks, scrapes, low-quality recoatings, and internal defects in fibers and their coatings, based on skew ray excitation and angle-resolved analysis.

Magnetic field interaction with guided light for detection of an active gaseous medium within an optical fiber.

We report a novel fiber-optic sensing architecture for the detection of paramagnetic gases. By interacting a modulated magnetic field with guided light within a microstructured optical fiber, it is possible to exploit Faraday Rotation Spectroscopy (FRS) within unprecedentedly small sample volumes. This approach, which utilizes magnetic circular birefringence and magnetic circular dichroism effects, is applied to a photonic bandgap fiber to detect molecular oxygen and operates at a wavelength of 762.309 nm. The optical fiber sensor has a 4.2 nL detection volume and 14.8 cm long sensing region. The observed FRS spectra are compared with a theoretical model that provides a first understanding of guided-mode FRS signals. This FRS guided-wave sensor offers the prospect of new compact sensing schemes.

High slope efficiency and high refractive index change in direct-written Yb-doped waveguide lasers with depressed claddings.

We report the first Yb:ZBLAN and Yb:IOG10 waveguide lasers fabricated by the fs-laser direct-writing technique. Pulses from a Titanium-Sapphire laser oscillator with 5.1 MHz repetition rate were utilized to generate negative refractive index modifications in both glasses. Multiple modifications were aligned in a depressed cladding geometry to create a waveguide. For Yb:ZBLAN we demonstrate high laser slope efficiency of 84% with a maximum output power of 170 mW. By using Yb:IOG10 a laser performance of 25% slope efficiency and 72 mW output power was achieved and we measured a remarkably high refractive index change exceeding Δn = 2.3 × 10(-2).

Efficient 2.9 µm fluorozirconate glass waveguide chip laser.

We report a large mode-area holmium-doped ZBLAN waveguide laser operating at 2.9 µm, which was pumped by a 1150 nm diode laser. The laser is based on ultrafast laser inscribed depressed cladding waveguides fabricated in uniformly rare-earth-doped bulk glass. It has a threshold of 28 mW and produced up to 27 mW of output power at an internal slope efficiency of approximately 20%.

Ultra-high-resolution greyscale fluorescence images via UV-exposure of thin flexible phosphor films.

Thin films of BaFCl:Sm nanocrystals prepared using a polymer binder were used to create fluorescence images. The phosphor films were exposed to a UV-C mercury lamp light source via chromium-coated quartz greyscale masks to create 4 µm resolution greyscale fluorescence images. The mechanism relies on the highly efficient conversion of Sm3+ to Sm2+ ions upon exposure to UV-C light which displays a large linear dynamic range. The red fluorescence around 688 nm of the Sm2+ is then read-out using blue-violet illumination under a laser scanning confocal microscope. The greyscale images with 16 greyscale levels had a resolution equivalent to ∼125 line pairs per mm or ∼6400 dpi. Improvements in the resolution would be possible using collimated UV-C laser exposure of the film or the use of higher resolution photomasks. Ultra-high resolution binary fluorescence images were also created with resolutions down to 2 µm (∼250 line pairs per mm, ∼12 700 dpi). Downstream applications of the technology could include tailored covert or overt anti-counterfeiting labelling.

Femtosecond direct-write überstructure waveguide Bragg gratings in ZBLAN.

Strong waveguide Bragg gratings (10.5 dB transmission dip) were fabricated using the femtosecond (fs) laser direct-write technique in ZBLAN glass. The Bragg gratings are based on depressed cladding waveguides and consist of planes, periodic according to the Bragg condition, which are constructed from a transverse hexagonal lattice of smaller point features. Such gratings are a key step toward the realization of mid-infrared monolithic waveguide lasers using the fs laser direct-write technique.

A europium metal-organic framework for dual Fe3+ ion and pH sensing.

Metal-organic frameworks (MOFs) with ratiometric sensing properties are desirable for many applications due to their intrinsic self-calibration. We report the re-assessment of the sensing properties of a MOF, originally reported as containing europium(III) and 2-hydroxyterephtalic acid, and having fluorescent ratiometric iron(III) sensing properties. Synchrotron single-crystal X-ray diffraction and proton nuclear magnetic resonance (1H NMR) spectroscopy revealed that the MOF is composed of 2-methoxyterephthalate, not 2-hydroxyterephthalate as originally reported. We found that the MOF exhibits a sensor turn-off response towards Fe3+ ion concentrations in the range 0.5-3.7 ppm (band 425 nm), and a turn-on response towards a decrease of pH from 5.4 to 3.0 (band 375 nm), both resulting from the addition of acidic Fe3+ salt solution to a MOF suspension. Thus, the ratiometric sensing properties and the originally proposed mechanism no longer apply; our work reveals a dynamic quenching mechanism for the fluorescence turn-off response due to the presence of Fe3+ ions, and a ligand protonation mechanism for the turn-on response to a decrease in pH. Our work highlights the importance of a thorough investigation of the structure of any newly synthesized MOF, and, in the case of potential sensors, their selectivity and any environmental effects on their sensing behavior.

Femtosecond laser induced low propagation loss waveguides in a lead-germanate glass for efficient lasing in near to mid-IR.

To support the growing landscape of near to mid-IR laser applications we demonstrate a range of low propagation loss femtosecond laser (FSL) written waveguides (WGs) that have achieved guided-mode laser operation in a rare earth (RE) doped lead-germanate glass. The WGs are fabricated in both the athermal and thermal FSL writing regimes using three different pulse repetition frequencies (PRF): 100 kHz (athermal); 1 MHz; and 5 MHz (thermal). The lasing capability of Yb3+ doped lead-germanate waveguides is verified in the near-IR. The refractive index contrast (∆n) for 100 kHz WGs is ~ 1 × 10-4, while for 5 MHz, ∆n increases to ~ 5 × 10-4. The WGs in the thermal regime are less effected by self-focusing and are larger in dimensions with reduced propagation losses. For the 1 MHz repetition rate thermal writing regime we report a low propagation loss WG (0.2 dB/cm) and demonstrate laser operation with slope efficiencies of up to ~ 28%.