All-optical stabilization of a soliton frequency comb in a crystalline microresonator.

We demonstrate the all-optical stabilization of a low-noise temporal soliton based microresonator based optical frequency comb in a crystalline resonator via a new technique to control the repetition rate. This is accomplished by thermally heating the microresonator with an additional probe laser coupled to an auxiliary optical resonator mode. The carrier-envelope offset frequency is controlled by stabilizing the pump laser frequency to a reference optical frequency comb. We analyze the stabilization by performing an out-of-loop comparison and measure the overlapping Allan deviation. This all-optical stabilization technique can prove useful as an actuator for self-referenced microresonator frequency combs.

Dissipative shock waves in all-normal-dispersion mode-locked fiber lasers.

We propose an interpretation of the pronounced "M" spectral shape that is a recurrent feature in all-normal-dispersion mode-locked fiber laser dynamics. Our interpretation involves shock wave formation regularized by dissipation, modeled by a modified Burgers equation. The large fringes appearing at the edges of the spectrum result from discontinuities in the spectral phase.

Dissipative rogue waves generated by chaotic pulse bunching in a mode-locked laser.

Rare events of extremely high optical intensity are experimentally recorded at the output of a mode-locked fiber laser that operates in a strongly dissipative regime of chaotic multiple-pulse generation. The probability distribution of these intensity fluctuations, which highly depend on the cavity parameters, features a long-tailed distribution. Recorded intensity fluctuations result from the ceaseless relative motion and nonlinear interaction of pulses within a temporally localized multisoliton phase.

On the mode-locking mechanism of a dissipative- soliton fiber oscillator.

We report on the generation of high-energy pulses in an all normal dispersion photonic-crystal fiber laser. Two mode-locking techniques with and without passive spectral filtering are studied both numerically and experimentally to address a roadmap for energy scaling. It is found that high-contrast passive modulation is a very promising mode-locking technique for energy scaling in dissipative-soliton laser. Moreover, this technique does not need any additional spectral filtering than the limited gain bandwidth to stabilize high-energy ultrashort pulses. The presented laser generates 110 nJ chirped pulses at 57 MHz repetition rate for an average power of 6.2 W. The output pulses could be dechirped close to the transform-limited duration of 100 fs.

Mode-locked 0.5 µJ fiber laser at 976 nm.

We report on high-energy femtosecond pulse generation from an ytterbium-doped rod-type fiber oscillator emitting around 976 nm. Self-starting and stable single-pulse operation are demonstrated with 4.2 W of average output power at a repetition rate of 8.4 MHz. The resulting energy level reaches 0.5 µJ. Because of the all-normal dispersion of the laser cavity, output pulses are naturally chirped with a duration of 14 ps. External compression using diffraction gratings shortens the pulse duration down to 460 fs.

High-energy femtosecond fiber laser at 976 nm.

We report on a passively mode-locked fiber laser emitting around 976nm. The self-starting mode locking is achieved in an unidirectional ring cavity by means of nonlinear polarization evolution. Stable single-pulse operation is observed for 480mW of average output power. This all-normal dispersion laser generates naturally chirped pulses with 1ps duration. The repetition rate is 40.6MHz, resulting in 12nJ pulse energy. External compression using bulk grating shortens the pulse duration down to 286fs.

Passively mode-locked single-polarization microstructure fiber laser.

The generation of high-power and stable ultra-short pulses from a passively mode-locked purely normal dispersion fiber laser is reported using the unique combination of a photonic crystal fiber featuring single-polarization, single-mode, and low nonlinearity with a high modulation depth semiconductor saturable absorber mirror. The environmentally-stable, self-starting fiber laser generates 1.6 W of average power at a repetition rate of 63 MHz, corresponding to a pulse energy of 25 nJ. The emitted pulses are positively chirped with a pulse duration of 3.7 ps. They are compressible down to a near transform-limited duration of 750 fs. Numerical simulations are in good agreement with the experimental results.

Mid-infrared ultra-high-Q resonators based on fluoride crystalline materials.

The unavailability of highly transparent materials in the mid-infrared has been the main limitation in the development of ultra-sensitive molecular sensors or cavity-based spectroscopy applications. Whispering gallery mode microresonators have attained ultra-high-quality (Q) factor resonances in the near-infrared and visible. Here we report ultra-high Q factors in the mid-infrared using polished alkaline earth metal fluoride crystals. Using an uncoated chalcogenide tapered fibre as a high-ideality coupler in the mid-infrared, we study via cavity ringdown technique the losses of BaF2, CaF2, MgF2 and SrF2 microresonators. We show that MgF2 is limited by multiphonon absorption by studying the temperature dependence of the Q factor. In contrast, in SrF2 and BaF2 the lower multiphonon absorption leads to ultra-high Q factors at 4.5 µm. These values correspond to an optical finesse of , the highest value achieved for any type of mid-infrared resonator to date.