Nanoscale Hydrodynamic Film for Diffusive Mass Transport Control in Compartmentalized Microfluidic Chambers.

A compartmentalized microfluidic chamber array that offers not only separate cell culture environments but also independent control of the diffusion of small molecules provides an extremely useful platform for cell cultivations and versatile cellular assays. However, it is challenging to incorporate both cell compartmentalization and active diffusion control in real-time and precise manners. Here, we present a novel nanoscale hydrodynamic film (NHF) that is formed between a solid substrate and a polydimethylsiloxane (PDMS) surface. The thickness of the NHF can be adjusted by varying the pressure applied between them so that the mass transfer through the NHF can also be controlled. These novel phenomena are characterized and applied to develop a compartmentalized microchamber array with diffusion-tunable and solution-switchable chemostat-like versatile bacterial assays. The NHF-based compartmentalization technique is ideal for not only continuous bacterial cultivation by consistently refreshing various nutrient sources but also various diffusion-based microbial assays such as chemical induction of synthetically engineered bacterial cells and selective growth of a specific bacterial strain with respect to chemical environments. In addition, we show that tight compartmentalization protects cells in the chambers, while biofilm formation and nutrient contamination are eliminated by loading a lysis buffer, which typically hinders long-term continuous cultures and accurate microbial assays on a chip. Therefore, we ensure that the NHF-based compartmentalization platform proposed in this work will facilitate not only fundamental studies in microbiology but also various practical applications of microbes for production of valuable metabolites and byproducts in a high-throughput and highly efficient format.

Novosphingobium humi sp. nov., isolated from soil of a military shooting range.

A Gram-stain-negative, strictly aerobic bacterium, designated R1-4T, was isolated from soil from a military shooting range in the Republic of Korea. Cells were non-motile short rods, oxidase-positive and catalase-negative. Growth of R1-4T was observed at 15-45 °C (optimum, 30 °C) and pH 6.0-9.0 (optimum, pH 7.0). R1-4T contained summed feature 8 (comprising C18 : 1ω7c/C18 : 1ω6c), summed feature 3 (comprising C16 : 1ω7c/C16 : 1ω6c), cyclo-C19 : 0ω8c and C16 : 0 as the major fatty acids and ubiquinone-10 as the sole isoprenoid quinone. Phosphatidylglycerol, phosphatidylethanolamine, diphosphatidylglycerol, sphingoglycolipid, phosphatidylcholine, an unknown glycolipid and four unknown lipids were detected as polar lipids. The major polyamine was spermidine. The G+C content of the genomic DNA was 64.4 mol%. The results of phylogenetic analysis based on 16S rRNA gene sequences indicated that R1-4T formed a tight phylogenetic lineage with Novosphingobium sediminicola HU1-AH51T within the genus Novosphingobium. R1-4T was most closely related to N. sediminicola HU1-AH51T with a 98.8 % 16S rRNA gene sequence similarity. The DNA-DNA relatedness between R1-4T and the type strain of N. sediminicola was 37.8±4.2 %. On the basis of phenotypic, chemotaxonomic and molecular properties, it is clear that R1-4T represents a novel species of the genus Novosphingobium, for which the name Novosphingobium humi sp. nov. is proposed. The type strain is R1-4T (=KACC 19094T=JCM 31879T).

A Microfluidic Platform for High-Throughput Screening of Small Mutant Libraries.

The screening and isolation of target microorganisms from mutated recombinant libraries are crucial for the advancement of synthetic biology and metabolic engineering. However, conventional screening tools present several limitations in throughput, cost, and labor. Herein, we describe a novel microfluidic high-throughput screening (HTS) platform with several advantages. The platform utilizes a fluid array to compartmentalize bacterial cells in well-ordered separated microwells and allows long-term cell culture with high throughput. The platform enables the extraction of selected target cells from the fluid array for additional culture and postanalysis by using a capillary-driven sample relocation method. To confirm the feasibility of the platform, we demonstrated two different types of HTS methods based on the levels of reporter gene expression and cellular growth rate difference. For the reporter gene-based HTS, a spike recovery approach was taken to demonstrate that target cells are successfully screened out from a mixture containing nontarget cells by repeating the culture and extraction processes. Additionally, the same platform allowed us to screen and sort target cells according to their cellular growth rate difference, which seems hard in conventional screening methods. Hence, the platform could be used for various microbiological assays, including the detection of cell-excreted metabolites, microbial biosensors, and other HTS systems.

Simultaneous utilization of glucose and xylose via novel mechanisms in engineered Escherichia coli.

After glucose, xylose is the most abundant sugar in lignocellulosic carbon sources. However, wild-type Escherichia coli is unable to simultaneously utilize both sugars due to carbon catabolite repression (CCR). In this paper, we describe GX50, an engineered strain capable of utilizing glucose and xylose simultaneously. This strain was obtained by evolving a mutant from which araC has been deleted, and in which genes required for pentose metabolism are constitutively expressed. The strain acquired four additional mutations during adaptive evolution, including intergenic mutations in the 5'-flanking region of xylA and pyrE, and missense mutations in araE (S91I) and ybjG (D99G). In contrast to wild type E. coli, GX50 rapidly converts xylose to xylitol even if glucose is available. Notably, the strain grows well when cultured on glucose, unlike some well-known CCR-insensitive mutants defective in the glucose phosphotransferase system. Our work will advance efforts to design a metabolically efficient platform strain for potential use in producing chemicals from lignocellulose.

Production of polyhydroxyalkanoates by the thermophile Cupriavidus cauae PHS1.

Thermophilic production of polyhydroxyalkanoate is considered a very promising way to overcome the problems that may arise when using mesophilic strains. This study reports the first thermophilic polyhydroxybutyrate-producing Cupriavidus species, which are known as the best polyhydroxybutyrate-producing microorganisms. Cupriavidus cauae PHS1 harbors a phbCABR cluster with high similarity to the corresponding proteins of C. necator H16 (80, 93, 96, and 97 %). This strain can produce polyhydroxybutyrate from a range of substrates, including acetate (5 g/L) and phenol (1 g/L), yielding 7.6 % and 18.9 % polyhydroxybutyrate, respectively. Moreover, the strain produced polyhydroxybutyrate at temperatures ranging from 25 to 50 °C, with the highest polyhydroxybutyrate content (47 °C) observed at 45 °C from gluconate. Additionally, the strain could incorporate 3-hydroxyvalerate (12.5 mol. %) into the polyhydroxybutyrate polymer using levulinic acid as a precursor. Thus, Cupriavidus cauae PHS1 may be a promising polyhydroxybutyrate producer as alternative for mesophilic polyhydroxybutyrate-producing Cupriavidus species.

Comparative Genomic Analysis and BTEX Degradation Pathways of a Thermotolerant Cupriavidus cauae PHS1.

Volatile organic compounds such as benzene, toluene, ethylbenzene, and isomers of xylenes (BTEX) constitute a group of monoaromatic compounds that are found in petroleum and have been classified as priority pollutants. In this study, based on its newly sequenced genome, we reclassified the previously identified BTEX-degrading thermotolerant strain Ralstonia sp. PHS1 as Cupriavidus cauae PHS1. Also presented are the complete genome sequence of C. cauae PHS1, its annotation, species delineation, and a comparative analysis of the BTEX-degrading gene cluster. Moreover, we cloned and characterized the BTEX-degrading pathway genes in C. cauae PHS1, the BTEX-degrading gene cluster of which consists of two monooxygenases and meta-cleavage genes. A genome-wide investigation of the PHS1 coding sequence and the experimentally confirmed regioselectivity of the toluene monooxygenases and catechol 2,3-dioxygenase allowed us to reconstruct the BTEX degradation pathway. The degradation of BTEX begins with aromatic ring hydroxylation, followed by ring cleavage, and eventually enters the core carbon metabolism. The information provided here on the genome and BTEX-degrading pathway of the thermotolerant strain C. cauae PHS1 could be useful in constructing an efficient production host.

Complete genome sequence of Brucella abortus A13334, a new strain isolated from the fetal gastric fluid of dairy cattle.

Brucella abortus is a major pathogen that infects livestock and humans. A new strain of B. abortus (A13334) was isolated from the fetal gastric fluid of a dairy cow, with the aim of using it to compare genetic properties, analyze virulence factor, and survey the epidemiological relationship to other Brucella species. Here, we report the complete and annotated genome sequence of B. abortus A13334.

Complete genome sequence of Brucella canis strain HSK A52141, isolated from the blood of an infected dog.

Brucella canis infection can be clinically inapparent in dogs, and when infection goes unnoticed, there is a chance for dog-to-human transmission. A new strain of B. canis was isolated from the blood of an infected dog in order to analyze the pathogenic mechanism, compare genetic properties, and develop new genetic tools for early diagnosis of canine brucellosis. Herein, we report the complete genome sequence of the strain B. canis HSK A52141. This is the second complete genome sequence and biological annotation available for a member of B. canis.

Heterologous expression of plant cell wall degrading enzymes for effective production of cellulosic biofuels.

A major technical challenge in the cost-effective production of cellulosic biofuel is the need to lower the cost of plant cell wall degrading enzymes (PCDE), which is required for the production of sugars from biomass. Several competitive, low-cost technologies have been developed to produce PCDE in different host organisms such as Escherichia coli, Zymomonas mobilis, and plant. Selection of an ideal host organism is very important, because each host organism has its own unique features. Synthetic biology-aided tools enable heterologous expression of PCDE in recombinant E. coli or Z. mobilis and allow successful consolidated bioprocessing (CBP) in these microorganisms. In-planta expression provides an opportunity to simplify the process of enzyme production and plant biomass processing and leads to self-deconstruction of plant cell walls. Although the future of currently available technologies is difficult to predict, a complete and viable platform will most likely be available through the integration of the existing approaches with the development of breakthrough technologies.

Metabolic Engineering of Escherichia coli for Production of Polyhydroxyalkanoates with Hydroxyvaleric Acid Derived from Levulinic Acid.

Polyhydroxyalkanoates (PHAs) are emerging as alternatives to plastics by replacing fossil fuels with renewable raw substrates. Herein, we present the construction of engineered Escherichia coli strains to produce short-chain-length PHAs (scl-PHAs), including the monomers 4-hydroxyvalerate (4HV) and 3-hydroxyvalerate (3HV) produced from levulinic acid (LA). First, an E. coli strain expressing genes (lvaEDABC) from the LA metabolic pathway of Pseudomonas putida KT2440 was constructed to generate 4HV-CoA and 3HV-CoA. Second, both PhaAB enzymes from Cupriavidus necator H16 were expressed to supply 3-hydroxybutyrate (3HB)-CoA from acetyl-CoA. Finally, PHA synthase (PhaCCv) from Chromobacterium violaceum was introduced for the subsequent polymerization of these three monomers. The resulting E. coli strains produced four PHAs (w/w% of dry cell weight): 9.1 wt% P(4HV), 1.7 wt% P(3HV-co-4HV), 24.2 wt% P(3HB-co-4HV), and 35.6 wt% P(3HB-co-3HV-co-4HV).

Substrate-inducible and antibiotic-free high-level 4-hydroxyvaleric acid production in engineered Escherichia coli.

In this study, we developed a levulinic acid (LA)-inducible and antibiotic-free plasmid system mediated by HpdR/P hpdH and infA-complementation to produce 4-hydroxyvaleric acid (4-HV) from LA in an engineered Escherichia coli strain. The system was efficiently induced by the addition of the LA substrate and resulted in tight dose-dependent control and fine-tuning of gene expression. By engineering the 5' untranslated region (UTR) of hpdR mRNA, the gene expression of green fluorescent protein (GFP) increased by at least two-fold under the hpdH promoter. Furthermore, by evaluating the robustness and plasmid stability of the proposed system, the engineered strain, IRV750f, expressing the engineered 3-hydroxybutyrate dehydrogenase (3HBDH∗) and formate dehydrogenase (CbFDH), produced 82 g/L of 4-HV from LA, with a productivity of 3.4 g/L/h and molar conversion of 92% in the fed-batch cultivation (5 L fermenter) without the addition of antibiotics or external inducers. Overall, the reported system was highly beneficial for the large-scale and cost-effective microbial production of value-added products and bulk chemicals from the renewable substrate, LA.

Bioproduction of propionic acid using levulinic acid by engineered Pseudomonas putida.

The present study elaborates on the propionic acid (PA) production by the well-known microbial cell factory Pseudomonas putida EM42 and its capacity to utilize biomass-derived levulinic acid (LA). Primarily, the P. putida EM42 strain was engineered to produce PA by deleting the methylcitrate synthase (PrpC) and propionyl-CoA synthase (PrpE) genes. Subsequently, a LA-inducible expression system was employed to express yciA (encoding thioesterase) from Haemophilus influenzae and ygfH (encoding propionyl-CoA: succinate CoA transferase) from Escherichia coli to improve the PA production by up to 10-fold under flask scale cultivation. The engineered P. putida EM42:ΔCE:yciA:ygfH was used to optimize the bioprocess to further improve the PA production titer. Moreover, the fed-batch fermentation performed under optimized conditions in a 5 L bioreactor resulted in the titer, productivity, and molar yield for PA production of 26.8 g/L, 0.3 g/L/h, and 83%, respectively. This study, thus, successfully explored the LA catabolic pathway of P. putida as an alternative route for the sustainable and industrial production of PA from LA.

Combinatorial Metabolic Engineering Strategies for the Enhanced Production of Free Fatty Acids in Escherichia coli.

In this study, we evaluated the effects of several metabolic engineering strategies in a systematic and combinatorial manner to enhance the free fatty acid (FFA) production in Escherichia coli. The strategies included (i) overexpression of mutant thioesterase I ('TesAR64C) to efficiently release the FFAs from fatty acyl-ACP; (ii) coexpression of global regulatory protein FadR; (iii) heterologous expression of methylmalonyl-CoA carboxyltransferase and phosphoenolpyruvate carboxylase to synthesize fatty acid precursor molecule malonyl-CoA; and (iv) disruption of genes associated with membrane proteins (GusC, MdlA, and EnvR) to improve the cellular state and export the FFAs outside the cell. The synergistic effects of these genetic modifications in strain SBF50 yielded 7.2 ± 0.11 g/L FFAs at the shake flask level. In fed-batch cultivation under nitrogen-limiting conditions, strain SBF50 produced 33.6 ± 0.02 g/L FFAs with a productivity of 0.7 g/L/h from glucose, which is the maximum titer reported in E. coli to date. Combinatorial metabolic engineering approaches can prove to be highly useful for the large-scale production of FA-derived chemicals and fuels.

Enhanced production of nonanedioic acid from nonanoic acid by engineered Escherichia coli.

In this study, whole-cell biotransformation was conducted to produce nonanedioic acid from nonanoic acid by expressing the alkane hydroxylating system (AlkBGT) from Pseudomonas putida GPo1 in Escherichia coli. Following adaptive laboratory evolution, an efficient E. coli mutant strain, designated as MRE, was successfully obtained, demonstrating the fastest growth (27-fold higher) on nonanoic acid as the sole carbon source compared to the wild-type strain. Additionally, the MRE strain was engineered to block nonanoic acid degradation by deleting fadE. The resulting strain exhibited a 12.8-fold increase in nonanedioic acid production compared to the wild-type strain. Six mutations in acrR, Pcrp , dppA, PfadD , e14, and yeaR were identified in the mutant MRE strain, which was characterized using genomic modifications and RNA-sequencing. The acquired mutations were found to be beneficial for rapid growth and nonanedioic acid production.

Characterization of an Entner-Doudoroff pathway-activated Escherichia coli.

BACKGROUND: Escherichia coli have both the Embden-Meyerhof-Parnas pathway (EMPP) and Entner-Doudoroff pathway (EDP) for glucose breakdown, while the EDP primarily remains inactive for glucose metabolism. However, EDP is a more favorable route than EMPP for the production of certain products. RESULTS: EDP was activated by deleting the pfkAB genes in conjunction with subsequent adaptive laboratory evolution (ALE). The evolved strains acquired mutations in transcriptional regulatory genes for glycolytic process (crp, galR, and gntR) and in glycolysis-related genes (gnd, ptsG, and talB). The genotypic, transcriptomic and phenotypic analyses of those mutations deepen our understanding of their beneficial effects on cellulosic biomass bio-conversion. On top of these scientific understandings, we further engineered the strain to produce higher level of lycopene and 3-hydroxypropionic acid. CONCLUSIONS: These results indicate that the E. coli strain has innate capability to use EDP in lieu of EMPP for glucose metabolism, and this versatility can be harnessed to further engineer E. coli for specific biotechnological applications.

Microfluidic device for analyzing preferential chemotaxis and chemoreceptor sensitivity of bacterial cells toward carbon sources.

We present a novel microfluidic device that enables high sensitive analyses of the chemotactic response of motile bacterial cells (Escherichia coli) that swim toward a preferred nutrient by sorting and concentrating them. The device consists of the Y-shaped microchannel that has been widely used in chemotaxis studies to attract cells toward a high concentration and a concentrator array integrated with arrowhead-shaped ratchet structures beside the main microchannel to trap and accumulate them. Since the number of accumulated cells in the concentrator array continuously increases with time, the device makes it possible to increase the sensitivity of detecting chemotactic responses of the cells about 10 times greater than Y-shaped channel devices in 60 min. In addition, the device can characterize the relative chemotactic sensitivity of chemoreceptors to chemoeffectors by comparing the number of cells in the concentrator array at different distances from the channel junction. Since the device allows the analysis of both the chemotactic responses and the sensitivity of chemoreceptors with high resolution, we believe that not only can the device be broadly used for various microbial chemotaxis assays but it also can further the advancement of microbiology and even synthetic biology.

Engineering Escherichia coli for efficient cellobiose utilization.

Escherichia coli normally cannot utilize the ß-glucoside sugar cellobiose as a carbon and energy source unless a stringent selection pressure for survival is present. The cellobiose-utilization phenotype can be conferred by mutations in the two cryptic operons, chb and asc. In this study, the cellobiose-utilization phenotype was conferred to E. coli by replacing the cryptic promoters of these endogenous operons with a constitutive promoter. Evolutionary adaptation of the engineered strain CP12CHBASC by repeated subculture in cellobiose-containing minimal medium led to an increase in the rate of cellobiose uptake and cell growth on cellobiose. An efficient cellobiose-metabolizing E. coli strain would be of great importance over glucose-metabolizing E. coli for a simultaneous saccharification and fermentation process, as the cost of the process would be reduced by eliminating one of the three enzymes needed to hydrolyze cellulose into simple sugars.

Microfluidic technologies for synthetic biology.

Microfluidic technologies have shown powerful abilities for reducing cost, time, and labor, and at the same time, for increasing accuracy, throughput, and performance in the analysis of biological and biochemical samples compared with the conventional, macroscale instruments. Synthetic biology is an emerging field of biology and has drawn much attraction due to its potential to create novel, functional biological parts and systems for special purposes. Since it is believed that the development of synthetic biology can be accelerated through the use of microfluidic technology, in this review work we focus our discussion on the latest microfluidic technologies that can provide unprecedented means in synthetic biology for dynamic profiling of gene expression/regulation with high resolution, highly sensitive on-chip and off-chip detection of metabolites, and whole-cell analysis.

Levulinic Acid-Inducible and Tunable Gene Expression System for Methylorubrum extorquens.

Methylorubrum extorquens AM1 is an efficient platform strain possessing biotechnological potential in formate- and methanol-based single carbon (C1) bioeconomy. Constitutive expression or costly chemical-inducible expression systems are not always desirable. Here, several glucose-, xylose-, and levulinic acid (LA)-inducible promoter systems were assessed for the induction of green fluorescent protein (GFP) as a reporter protein. Among them, the LA-inducible gene expression system (HpdR/P hpdH ) showed a strong expression of GFP (51-fold) compared to the control. The system was induced even at a low concentration of LA (0.1 mM). The fluorescence intensity increased with increasing concentrations of LA up to 20 mM. The system was tunable and tightly controlled with meager basal expression. The maximum GFP yield obtained using the system was 42 mg/g biomass, representing 10% of the total protein content. The efficiency of the proposed system was nearly equivalent (90%-100%) to that of the widely used strong promoters such as P mxaF and P L/O4 . The HpdR/P hpdH system worked equally efficiently in five different strains of M. extorquens. LA is a low-cost, renewable, and sustainable platform chemical that can be used to generate a wide range of products. Hence, the reported system in potent strains of M. extorquens is highly beneficial in the C1-biorefinery industry to produce value-added products and bulk chemicals.

Inducible and tunable gene expression systems for Pseudomonas putida KT2440.

Inducible and tunable expression systems are essential for the microbial production of biochemicals. Five different carbon source- and substrate-inducible promoter systems were developed and further evaluated in Pseudomonas putida KT2440 by analyzing the expression of green fluorescent protein (GFP) as a reporter protein. These systems can be induced by low-cost compounds such as glucose, 3-hydroxypropionic acid (3HP), levulinic acid (LA), and xylose. 3HP-inducible HpdR/PhpdH was also efficiently induced by LA. LvaR/PlvaA and XutR/PxutA systems were induced even at low concentrations of LA (0.1 mM) and xylose (0.5 mM), respectively. Glucose-inducible HexR/Pzwf1 showed weak GFP expression. These inducer agents can be used as potent starting materials for both cell growth and the production of a wide range of biochemicals. The efficiency of the reported systems was comparable to that of conventional chemical-inducible systems. Hence, the newly investigated promoter systems are highly useful for the expression of target genes in the widely used synthetic biology chassis P. putida KT2440 for industrial and medical applications.