RESUMEN
The utility of electrochemical active biofilm in bioelectrochemical systems has received considerable attention for harvesting energy and chemical products. However, the slow electron transfer between biofilms and electrodes hinders the enhancement of performance and still remains challenging. Here, using Fe3O4 /L-Cys nanoparticles as precursors to induce biomineralization, a facile strategy for the construction of an effective electron transfer pathway through biofilm and biological/inorganic interface is proposed, and the underlying mechanisms are elucidated. Taking advantage of an on-chip interdigitated microelectrode array (IDA), the conductive current of biofilm that is related to the electron transfer process within biofilm is characterized, and a 2.10-fold increase in current output is detected. The modification of Fe3O4/L-Cys on the electrode surface facilitates the electron transfer between the biofilm and the electrode, as the bio/inorganic interface electron transfer resistance is only 16% compared to the control. The in-situ biosynthetic Fe-containing nanoparticles (e.g., FeS) enhance the transmembrane EET and the EET within biofilm, and the peak conductivity increases 3.4-fold compared to the control. The in-situ biosynthesis method upregulates the genes involved in energy metabolism and electron transfer from the transcriptome analysis. This study enriches the insights of biosynthetic nanoparticles on electron transfer process, holding promise in bioenergy conversion.
Asunto(s)
Biopelículas , Transporte de Electrón , Técnicas Electroquímicas/métodos , Compuestos Ferrosos/química , Electrodos , Nanopartículas/química , Fuentes de Energía BioeléctricaRESUMEN
BACKGROUND: HIV-tuberculosis (HIV-TB) co-infection is a significant public health concern worldwide. TB delay, consisting of patient delay, diagnostic delay, treatment delay, increases the risk of adverse anti-TB treatment (ATT) outcomes. Except for individual level variables, differences in regional levels have been shown to impact the ATT outcomes. However, few studies appropriately considered possible individual and regional level confounding variables. In this study, we aimed to assess the association of TB delay on treatment outcomes in HIV-TB co-infected patients in Liangshan Yi Autonomous Prefecture (Liangshan Prefecture) of China, using a causal inference framework while taking into account individual and regional level factors. METHODS: We conducted a study to analyze data from 2068 patients with HIV-TB co-infection in Liangshan Prefecture from 2019 to 2022. To address potential confounding bias, we used a causal directed acyclic graph (DAG) to select appropriate confounding variables. Further, we controlled for these confounders through multilevel propensity score and inverse probability weighting (IPW). RESULTS: The successful rate of ATT for patients with HIV-TB co-infection in Liangshan Prefecture was 91.2%. Total delay (OR = 1.411, 95% CI: 1.015, 1.962), diagnostic delay (OR = 1.778, 95% CI: 1.261, 2.508), treatment delay (OR = 1.749, 95% CI: 1.146, 2.668) and health system delay (OR = 1.480 95% CI: (1.035, 2.118) were identified as risk factors for successful ATT outcome. Sensitivity analysis demonstrated the robustness of these findings. CONCLUSIONS: HIV-TB co-infection prevention and control policy in Liangshan Prefecture should prioritize early treatment for diagnosed HIV-TB co-infected patients. It is urgent to improve the health system in Liangshan Prefecture to reduce delays in diagnosis and treatment.
Asunto(s)
Coinfección , Infecciones por VIH , Puntaje de Propensión , Tuberculosis , Humanos , Infecciones por VIH/complicaciones , Infecciones por VIH/tratamiento farmacológico , Femenino , Masculino , Coinfección/tratamiento farmacológico , Coinfección/epidemiología , Adulto , China/epidemiología , Tuberculosis/tratamiento farmacológico , Tuberculosis/complicaciones , Persona de Mediana Edad , Resultado del Tratamiento , Antituberculosos/uso terapéutico , Tiempo de Tratamiento/estadística & datos numéricos , Diagnóstico TardíoRESUMEN
The interfacial correlation factor f(m,x), where m refers to the interaction among ice, water and the substrate and x refers to the ratio of the critical nucleation size to the surface topography characteristic size of the substrate, plays a crucial role in the classical theory of heterogeneous ice nucleation as it significantly impacts the energy of nucleation. Generally, a smaller value of f(m,x) indicates a higher propensity for ice nucleation. The degree of structural compatibility between ice and the substrate greatly influences f(m,x), particularly on specific substrates. Several approaches have been proposed to calculate the lattice matching based on this idea, which allows whether a surface is favorable for nucleation to be determined. However, none of these methods adequately correlates the mismatch index with ice growth phenomena. In this paper, we embarked on a new attempt to calculate the mismatch index by combining the lattice parameter and Miller index (LPMI). Droplet freezing experiments have been carried out on α-Al2O3 and silicon surfaces with different Miller indices to verify the rationality of the LPMI method. Furthermore, we validated the LPMI method extensively against other works and further demonstrated its readiness, accuracy and universality for freezing problems. The results consistently show that δd = 2|di - ds|/(di + ds) with interplanar spacing more accurately predicts heterogeneous ice nucleation rates across a wide range of substrates than δ1 = (ai - as)/ai with the lattice parameter of ice and the substrate and is more generally applicable than δ2D = (di - di)/di with the distances between two adjacent and congener atoms on the same plane. We believe that the proposed approach will aid in the selection of substrates for promoting or inhibiting heterogeneous nucleation on a specific substrate.
RESUMEN
Microalgae have been renowned as the most promising energy organism with significant potential in carbon fixation. In the large-scale cultivation of microalgae, the 3D porous substrate with higher specific surface area is favorable to microalgae adsorption and biofilm formation, whereas difficult for biofilm detachment and microalgae harvesting. To solve this contradiction, N-isopropylacrylamide, a temperature-responsive gels material, was grafted onto the inner surface of the 3D porous substrate to form temperature-controllable interface wettability. The interfacial free energy between microalgae biofilm and the substrates increased from -63.02 mJ/m2 to -31.89 mJ/m2 when temperature was lowered from 32 °C to 17 °C, weakening the adsorption capacity of cells to the surface, and making the biofilm detachment ratio increased to 50.8%. When further cooling the environmental temperature to 4 °C, the detachment capability of microalgae biofilm kept growing. 91.6% of the cells in the biofilm were harvesting from the 3D porous substrate. And the biofilm detached rate was up to 19.84 g/m2/h, realizing the temperature-controlled microalgae biofilm harvesting. But, microalgae growth results in the secretion of extracellular polymeric substances (EPS), which enhanced biofilm adhesion and made cell detachment more difficult. Thus, ultrasonic vibration was used to reinforce biofilm detachment. With the help of ultrasonic vibration, microalgae biofilm detached rate increased by 143.45% to 41.07 g/m2/h. These findings provide a solid foundation for further development of microalgae biofilm detachment and harvesting technology.
Asunto(s)
Biopelículas , Geles , Microalgas , Temperatura , Biopelículas/crecimiento & desarrollo , Microalgas/crecimiento & desarrollo , Porosidad , Geles/química , Acrilamidas/químicaRESUMEN
As a crucial ecological protection area in China, the Southern hilly red soil region is characterized by uneven spatial and temporal distribution of ecological landscape elements, unpredictable and changeable interrelationships between them, diversified driving factors, and lack of comprehensive consideration of ecosystem services. In order to better understand the interaction between ecosystem services, restore regional ecology, and promote sustainable development, the evolution law and influencing mechanism of ecosystem services and their driving factors are quantitatively analyzed in the study. Based on simulations of different ecosystem services from 2000 to 2020, their spatial and temporal changes and the contributions of main drivers are quantified, their trade-offs and synergies are analyzed, and the changing rules under the influence of natural factors and socioeconomic factors are explored. The results show that (1) the crop production significantly increases in the southwest and north regions, the habitat quality decreases in urban and coastal areas, and the soil retention and water yield show an increasing trend from west to east. (2) Land use/cover is the main driver of carbon storage and habitat quality variation, and precipitation is an important driver of water yield spatial variation. (3) The crop production and the other four ecosystem services show a trade-offs relationship, and the relationship between supporting services and regulating services is the synergetic. (4) The altitude weakens the synergistic relationship between soil retention and habitat quality/carbon storage, while it enhances the synergistic relationship between soil retention and water yield. Driven by precipitation factors, ecosystem services related to water yield have significant differences in the change. The population density enhances the trade-offs of crop production and soil retention, as well as the synergistic relationship between soil retention and habitat quality/carbon storage. In different land use/cover (LULC), the influence of urban land on ecosystem services relationship change is more obvious. Overall, this study can provide scientific bases and policy suggestions for ecosystem protection/restoration in the red soil region of Southern China, which has an important theoretical and practical significance.
Asunto(s)
Ecosistema , Suelo , Conservación de los Recursos Naturales/métodos , Monitoreo del Ambiente/métodos , China , Carbono , AguaRESUMEN
The immunostimulatory effects and the involved molecular mechanisms of polysaccharides from hawthorn fruit (Crataegus spp.) have not been well understood. In this study, the chemical composition, monosaccharide composition, uronic acid content, and structural features of hawthorn fruit polysaccharides (HFP) and the two collected fractions were analyzed. Both AF1-2 and AF2 have pectic-like structural features rich in galacturonic acid. AF2 showed superior proinflammatory effects on macrophages which significantly increased the secretion of pro-inflammatory cytokines interleukin-1ß, interleukin-6, and tumor necrosis factor-α, but not AF1-2. AF2 was found to activate the nuclear factor-κB signaling pathway with suppressed expression of IκBα but up-regulated expression of p-IκBα and nuclear factor-κB P65. The surface binding site of AF2 on macrophage cells was characterized and toll like receptor-4 was responsible for AF2 induced activation of down-stream nuclear factor-κB signaling pathways. AF2 from hawthorn fruit could be potentially used as a natural source of immunomodulator in functional foods.
Asunto(s)
Crataegus , Frutas , Factores Inmunológicos , Macrófagos , FN-kappa B , Polisacáridos , Transducción de Señal , Receptor Toll-Like 4 , Crataegus/química , Receptor Toll-Like 4/metabolismo , Polisacáridos/farmacología , Transducción de Señal/efectos de los fármacos , Macrófagos/efectos de los fármacos , Macrófagos/metabolismo , Frutas/química , FN-kappa B/metabolismo , Ratones , Animales , Factores Inmunológicos/farmacología , Células RAW 264.7 , Extractos Vegetales/farmacología , Extractos Vegetales/química , Factor de Necrosis Tumoral alfa/metabolismo , Citocinas/metabolismo , Interleucina-6/metabolismo , Interleucina-1beta/metabolismo , Ácidos HexurónicosRESUMEN
Precision manipulation of particle-enrichment patterns in droplets is challenging but important in biochemical analysis and clinical diagnosis. Herein, a light strategy for precisely manipulating particle enrichment patterns is reported. Focused laser irradiation to the droplet induces a Marangoni flow owing to a localized photothermal effect, which carries in-droplet particles and concentrates them at the laser-spot-acted region. Owing to high flexibility of light, multiple particle-enriched sites are formed in a droplet, and the concentrated particles can be transported and reconstructed on demand. In addition to the island-like enrichment pattern, this optical particle manipulation strategy enables the formation of various particle-enriched patterns, such as the line-shape and circle-shape patterns. Further, light directly acts on the working fluid instead of target particles, considerably weakening dependence on particle properties. For particles whose density is similar to that of the working fluid, a portion of particles can still be concentrated. It is also found that only a small portion of submicron particles can be concentrated, while nanoparticles are hardly concentrated by this light strategy. Moreover, high reconfigurability of light enables in-parallel high-throughput operations, which is demonstrated using two laser beams to form two particle enrichment sites in a droplet simultaneously. Finally, this light strategy is also demonstrated by concentrating cells and nucleic acid molecules. This work paves the way for the applications of optofluidics in cell sorting, point-of-care analysis, and drug screening.
RESUMEN
Cobalt phthalocyanine (CoPc) has attracted particular interest owing to its excellent activity during the electrochemical CO2 conversion to CO. However, the efficient utilization of CoPc at industrially relevant current densities is still a challenge owing to its nonconductive property, agglomeration, and unfavorable conductive substrate design. Here, a microstructure design strategy for dispersing CoPc molecules on a carbon substrate for efficient CO2 transport during CO2 electrolysis is proposed and demonstrated. The highly dispersed CoPc is loaded on a macroporous hollow nanocarbon sheet to act as the catalyst (CoPc/CS). The unique interconnected and macroporous structure of the carbon sheet forms a large specific surface area to anchor CoPc with high dispersion and simultaneously boosts the mass transport of reactants in the catalyst layer, significantly improving the electrochemical performance. By employing a zero-gap flow cell, the designed catalyst can mediate CO2 to CO with a high full-cell energy efficiency of 57% at 200 mA cm-2 .
RESUMEN
Ni single-atom catalysts (SACs) are appealing for electrochemical reduction CO2 reduction (CO2 RR). However, regulating the balance between the activity and conductivity remains a challenge to Ni SACs due to the limitation of substrates structure. Herein, the intrinsic performance enhancement of Ni SACs anchored on quasi-one-dimensional graphene nanoribbons (GNRs) synthesized is demonstrated by longitudinal unzipping carbon nanotubes (CNTs). The abundant functional groups on GNRs can absorb Ni atoms to form rich Ni-N4 -C sites during the anchoring process, providing a high intrinsic activity. In addition, the GNRs, which maintain a quasi-one-dimensional structure and possess a high conductivity, interconnect with each other and form a conductive porous framework. The catalyst yields a 44 mA cm-2 CO partial current density and 96% faradaic efficiency of CO (FECO ) at -1.1 V vs RHE in an H-cell. By adopting a membrane electrode assembly (MEA) flow cell, a 95% FECO and 2.4 V cell voltage are achieved at 200 mA cm-2 current density. This work provides a rational way to synthesize Ni SACs with a high Ni atom loading, porous morphology, and high conductivity with potential industrial applications.
RESUMEN
Photoelectrochemical reduction of carbon dioxide (CO2) is a promising avenue to realize resourceful utilization of carbon dioxide and mitigate the energy shortage. Herein, a photocatalytic fuel cell with a bubbling fluidized cathode (PFC-BFC) is proposed to increase the performance of the photocatalytic CO2 reduction reaction (CO2RR). Titanium carbide (Ti3C2) is first used as a fluidized cathode catalyst with the dual features of superior capacitance and high CO2RR catalytic activity. Compared with the conventional PFC system, the as-proposed PFC-BFC system exhibits a higher gas production performance. Particularly, the generation rate and Faraday efficiency for CH4 production reach to 37.2 µmol g-1 h-1 and 72%, which are 10.9 and 6.5 times higher than that of the conventional PFC system, respectively. The bubbling fluidized cathode allows a rapid electron transfer between catalysts and the current collector and an efficient diffusion of catalysts in the whole solution, thus remarkably increasing the effective reaction area of the CO2RR. In addition, the fluidized reaction mechanism of charging/discharging-coupled CO2RR is investigated. Significantly, a magnified PFC-BFC system is designed and exhibits a similar gas generation rate compared to that of the small-scale system, indicating a good potential of scaling up in the industry applications. These results demonstrated that the proposed PFC-BFC system can maximize the utilization of catalyst active sites and enhance the reaction kinetics, providing an alternative design for the application of CO2RR.
RESUMEN
OBJECTIVE: This study investigated the impacts of SIRT1 activation on rheumatoid arthritis (RA)-related angiogenesis. METHODS: HUVECs were cultured by different human serum. Intracellular metabolites were quantified by UPLC-MS. Next, HUVECs and rat vascular epithelial cells under different inflammatory conditions were treated by a SIRT1 agonist resveratrol (RSV). Cytokines and biochemical indicators were detected by corresponding kits. Protein and mRNA expression levels were assessed by immunoblotting and PCR methods, respectively. Angiogenesis capabilities were evaluated by migration, wound-healing and tube-formation experiments. To down-regulate certain signals, gene-specific siRNA were applied. RESULTS: Metabolomics study revealed the accelerated glycolysis in RA serum-treated HUVECs. It led to ATP accumulation, but did not affect GTP levels. RSV inhibited pro-angiogenesis cytokines production and glycolysis in both the cells, and impaired the angiogenesis potentials. These effects were mimicked by an energy metabolism interrupter bikini in lipopolysaccharide (LPS)-primed HUVECs, largely independent of HIF-1α. Both RSV and bikinin can inhibit the activation of the GTP-dependent pathway Rho/ROCK and reduce VEGF production. Abrogation of RhoA signaling reinforced HIF-1α silencing-brought changes in LPS-stimulated HUVECs, and overshadowed the anti-angiogenesis potentials of RSV. CONCLUSION: Glycolysis provides additional energy to sustain Rho/ROCK activation in RA subjects, which promotes VEGF-driven angiogenesis and can be inhibited by SIRT1 activation.
Asunto(s)
Artritis Reumatoide , Neovascularización Patológica , Humanos , Ratas , Animales , Resveratrol/farmacología , Neovascularización Patológica/tratamiento farmacológico , Factor A de Crecimiento Endotelial Vascular/genética , Sirtuina 1/genética , Sirtuina 1/metabolismo , Lipopolisacáridos/metabolismo , Cromatografía Liquida , Espectrometría de Masas en Tándem , Artritis Reumatoide/tratamiento farmacológico , Artritis Reumatoide/metabolismo , Citocinas/metabolismo , Glucólisis , Guanosina Trifosfato/metabolismo , Subunidad alfa del Factor 1 Inducible por Hipoxia/metabolismoRESUMEN
Flexible control of droplet transportation is crucial in various applications but is constrained by liquid-solid friction. The development of biomimetic lubricant-impregnated slippery surfaces provides a new solution for flexible manipulation of droplet transportation. Herein, a light strategy is reported for flexibly controlling droplet transportation on photosensitive lubricant-impregnated slippery surfaces. Owing to the localized heating effect of a focused laser beam via photothermal conversion, the resultant thermal Marangoni flow and horizontal component of the surface tension associated with the asymmetric wetting ridges are together responsible for actuating droplet transportation. It is found that the asymmetry of the wetting ridge is dominated by the thickness of the infused oil layer, which directly affects the droplet transportation. The feasibility of this light strategy is also demonstrated by uphill movement, droplet coalescence, and chemical reaction. This study provides a new design for potential applications in open droplet microfluidics, analytical chemistry, diagnosis, etc.
RESUMEN
Three-dimensional porous materials have been demonstrated as the most successful bioelectrodes in bioelectrochemical systems due to their high specific surface area and abundant adhesion regions for electroactive bacteria. However, the pore clogging potentially limits the mass transfer process inside the electrode due to the unreasonable structure design and long-term operation. The investigation of mass transport behavior in the porous scaffolds is of great significance for designing the electrode structure and optimizing bioelectrochemical system performance. To in situ characterize the mass transport behavior in the orderly pore structure, model electrodes with 100 copper wires (10 × 10) are constructed to imitate a three-dimensional porous structure (pore size: â¼150 µm) commonly employed in bioelectrodes. The poor proton effective diffusion coefficient solidly demonstrates that the mass transport inside the three-dimensional porous electrode is critically inhibited, leading not only to a progressive change and sparse biomass in the biofilm development process but also to biofilm acidification due to serious proton accumulation. It finally results in sluggish bacterial metabolic activity and a decreased electrocatalytic capacity. The interior space of porous electrodes cannot be adequately utilized, resulting in the inability to fully exploit the advantages of their abundant surface area. Consequently, the construction of gradient porous electrodes with small inner and large outer pores to enhance mass transport is a feasible proposal for enhancing performance. The proposed methodology of establishing model electrodes combined with the in situ detection technique within porous electrodes is crucial for acquiring various types of physicochemical information inside the bioelectrode, such as biofilm growth situation, biochemical reaction conditions, as well as mass transfer characteristics. More importantly, the work provides a fundamental basis for designing highly efficient bioelectrodes.
Asunto(s)
Biopelículas , Protones , Porosidad , Electrodos , BacteriasRESUMEN
Microalgae biofilm-based culture provides an efficient CO2 reduction and wastewater treatment method for its high photosynthetic efficiency and density. As supporting substrates for microalgae biofilm, porous materials have a big available adsorption area, but mutual shading makes it difficult to transmit external light to the internal surface for attached cells' photosynthesis. Thus, light-guided particles (SiO2) were introduced into photosensitive resin to fabricate a light-guided ordered porous photobioreactor (PBR) by 3D printing technology in this study. The space utilization of the PBR was significantly enhanced and the effective microalgae adsorption area was increased by 13.6 times. Further, a thermo-responsive hydrogel was grafted onto the surface of the substrate to form a smart temperature-controllable interface that could enhance microalgae adsorption and desorption in both directions. When the thermo-responsive layer received light, it would generate heat due to the hydrogel's photo-thermal effect. And the surface temperature would then raise to 33 °C, higher than the hydrogel phase transition point of 32 °C, making the surface shrinking and more hydrophobicity for microalgae cells attachment. The microalgae cells' adsorption capacity increased by 103%, resulting in a high microalgae growth rate of 3.572 g m-2 d-1. When turning off the light, the surface temperature would cool down to below 20 °C, the surface would shrink. And the biofilm shows a 564.7% increase in desorption ability, realizing temperature-controlled microalgae harvesting.
Asunto(s)
Microalgas , Dióxido de Carbono , Adsorción , Temperatura , Porosidad , Dióxido de Silicio , Fotobiorreactores , Biopelículas , Hidrogeles , BiomasaRESUMEN
Biofilm-based microalgae culture combined with wastewater treatment is a promising biotechnology for environmental management. Light availability influences the accumulation of microalgal biomass and nutrient removal. A light attenuation model which comprehensively considered microalgal biofilm structure (density and biofilm thickness), pigments content, and extracellular polymeric substances content was developed to predict the light attenuation in biofilm according to the simplification of the radiative transfer equation. The predicted results were in good overall agreement with the experiment, with an average error of less than 9.02%. These factors (biofilm density, thickness, pigments content, and extracellular polymeric substances content) all contributed to the light intensity attenuation, but biofilm thickness caused the most dramatic attenuation under the same increment of relative change in actual culture. The scattering coefficient of the biofilm (0.433 m2/g) was less than that of the suspension (1.489 m2/g) under white incident light. It suggests that the dense structure of cells allows much light to be concentrated in the forward direction when transmitting. This model could be adopted to predict the light distribution in microalgal biofilm for the further design of efficient photobioreactors and the development of light optimization strategies.
Asunto(s)
Microalgas , Biopelículas , Fotobiorreactores , Biomasa , BiotecnologíaRESUMEN
Heterotrophic-assisted photoautotrophic microalgae biofilm cultivation was an alternative way to realize CO2 reduction and wastewater treatment. Growth kinetics supplied a channel to better understand how the cultivation conditions affect microalgal growth and CO2 reduction. However, the two growth modes (heterotroph and photoautotroph) have different needs for organic and inorganic nutrients. Thus, combining the threshold theory and multiplication theory, an integral multifactorial kinetic model that looking insight into the comprehensive effect of glucose, CO2, light intensity, and nitrate was developed for heterotrophic-assisted photoautotrophic microalgae biofilm growth in this study. R2 between model and experiment was 0.99. It predicted the maximum specific growth rate and maximum CO2 consumption rate of heterotrophic-assisted photoautotrophic microalgae biofilm was 1.868 h-1 and 1.02 h-1, respectively. This model fully explained the influence of the main factors on microalgae biofilm growth and reasonably predicted the growth rate of microalgae biofilm under different growth conditions.
Asunto(s)
Microalgas , Dióxido de Carbono/farmacología , Glucosa/farmacología , Cinética , Biopelículas , BiomasaRESUMEN
For high-performance anion exchange membrane fuel cells (AEMFCs), the anion exchange membrane (AEMs) should be as thin as possible to reduce the ohmic resistance. However, the mechanical stability of ultrathin AEMs cannot be guaranteed, as well as a huge risk of gas (H2 &O2 ) permeation. In this work, composite AEMs based on ultrahigh molecular weight polyethylene (UHMWPE) are prepared by in situ bulk polymerization. The as-prepared composite membranes can be as thin as 4 µm, and possess super high strength beyond 150 MPa. It also shows extremely low hydrogen permeation, low water uptake, low dimensional swelling, high conductivity, and good alkaline stability. In addition, the fuel cell performance based on the ultrathin composite AEMs exhibits outstanding peak power density of 1014 and 534 mW cm-2 for H2 -O2 and H2 -Air (CO2 -free) at 65 °C, respectively, as well as good short-term durability.
RESUMEN
Lead ion (Pb2+) is one of the most common water pollutants. Herein, with bamboo as the raw material, we fabricate a thin-walled hollow ellipsoidal carbon-based adsorbent (CPCs900) containing abundant O-containing groups and carbon defects and having a specific surface area as large as 730.87 m2 g-1. CPCs900 shows a capacity of 37.26 mg g-1 for adsorbing Pb2+ in water and an efficiency of 98.13% for removing Pb2+ from water. This is much better than the activated carbon commonly used for removing Pb2+ from water (12.19 mg g-1, 30.48%). The bond interaction of Pb2+ with the O-containing groups on CPCs900 and the electrostatic interaction of Pb2+ with the electron-rich carbon defects on CPCs900 could be the main forces to drive Pb2+ adsorption on CPCs900. The outstanding adsorption performance of CPCs900 could be due to the abundant O-containing groups and carbon defects as well as the large specific surface area of CPCs900. Bamboo has a large reserve and a low price. The present work successfully converts bamboo into adsorbents with outstanding performances in removing Pb2+ from water. This is of great significance for meeting the huge industrial demand on highly efficient adsorbents for removing toxic metal ions from water.
Asunto(s)
Contaminantes Químicos del Agua , Contaminantes del Agua , Adsorción , Carbón Orgánico/química , Concentración de Iones de Hidrógeno , Iones , Cinética , Plomo , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
Microfluidic paper-based analytical devices (µPADs) have quickly been an excellent choice for point-of-care diagnostic platforms ever since they appeared. Because capillary force is the main driving force for the transport of analytes in µPADs, low spontaneous imbibition rates may limit the detection sensitivity. Therefore, quantitative understanding of internal spontaneous capillary flow progress is requisite for designing sensitive and accurate µPADs. In this work, experimental and numerical studies have been performed to investigate the capillary flow in a typical filter paper. We use light-transmitting imaging technology to study wetting saturation changes in the paper. Our experimental results show an obvious transition of a saturated wetting front into an unsaturated wetting front as the imbibition proceeds. We find that the single-phase Darcy model considerably overestimates the temporal wetting penetration depths. Alternatively, we use the Richards equation together with the two-phase flow material properties that are obtained from the image-based pore-network modeling of the filter paper. Moreover, we have considered a dynamic term in the capillary pressure due to strong wetting dynamics in spontaneous imbibition. As a result, the numerical predictions of spontaneous imbibition in the paper are significantly improved. Our studies provide insights into the development of a quantitative spontaneous imbibition model for µPADs applications.
Asunto(s)
Dispositivos Laboratorio en un Chip , Microfluídica , HumectabilidadRESUMEN
Microalgal biofilm, a stable community of many algal cells attached to a solid substrate, plays a significant role in the efficient accumulation of renewable energy feedstocks, wastewater treatment, and carbon reduction. The adhesion tendency of microalgal cells on solid substrates is the basis for controlling the formation and development of microalgal biofilm. To promote the adhesion of microalgal cells on solid substrates, it is necessary to clarify which surface properties have to be changed in the most critical factors affecting the adhesion. However, there have been few systematic discussions on what surface properties influence the adhesion tendency of algal cells on solid substrates. In this study, the essential principle of microalgal cell adhesion onto solid substrates was explored from the perspective of the interaction energy between microalgal cells and solid substrates. The influence of surface properties between microalgal cells and solid substrates on interaction energies was discussed via extended Derjaguin-Landau-Verwey-Overbeek (eDLVO) theory and a sensitivity analysis. The results showed that surface properties, including surface potential (ξ) and surface free energy components, significantly affect the adhesion tendency of microalgal cells on different solid substrates. When the solid surface possesses positive charges (ξ > 0), reducing ξ or the electron donor components of the solid substrate (γs-) is an effective measure to promote microalgal cell adhesion onto the solid substrate. When the solid surface possesses negative charges (ξ < 0), an increase in either γs- or the absolute value of ξ should be avoided in the process of microalgae adhesion. Overall, this research provides a direction for the selection of solid substrates and a direction for surface modification to facilitate the adhesion tendency of microalgal cells on solid substrates under different scenarios.