Nanostring-cluster hierarchical structured Bi2O3: synthesis, evolution and application in biosensing.

In the present study, a simple strategy was developed to fabricate a new Bi2O3 nanostring-cluster hierarchical structure. Precursor microrods composed of Bi(C2O4)OH were initially grown under hydrothermal conditions. After calcination in air, Bi(C2O4)OH microrods were carved into unique string-cluster structures by the gas produced during the decomposition process. To explain the formation mechanism, the effects of pyrolysis temperature and time on the morphology of the as-prepared samples were investigated and are discussed in detail. It was discovered that the nanostring-cluster-structured Bi2O3 consists of thin nanoplatelet arrays, which is advantageous for glucose enzyme immobilization and for designing biosensors. The resulting Bi2O3 structure showed an excellent capability in the modification of electrode surfaces in biosensors by enhancing the sensitivity, with good specificity and response time. Such qualities of a biosensor are ideal characteristics for glucose sensing performance and allow for further explorations of its application in other fields.

Extended Occupational Therapy Reintegration Strategies for a Woman With Guillain-Barré Syndrome: Case Report.

This case report describes a unique long-term functional recovery process to promote successful community reintegration for a woman with Guillain-Barré syndrome (GBS), a rare autoimmune disease. Her main symptoms were very limited mobility and depressive symptoms due to the unknown cause of and cure for the illness. Holistic occupational strategies helped the client stabilize her emotional state, create a safe home environment, improve a communication method, increase physical activity, and promote social participation. Participation in a fall prevention clinical trial lowered her risk of falling; at 9 mo, she reached 75% of the maximum Social Integration score; at 13 mo, she reached near-normal level for activities of daily living (ADLs) and her fastest time for the Timed Up and Go test; and at 2 yr, she achieved a 100% score in instrumental ADLs. For community integration of clients with GBS, a comprehensive strategic self-management approach should be prescribed for long-term recovery.

Biomechanical analysis of press-extension technique on degenerative lumbar with disc herniation and staggered facet joint.

This study investigates the effect of a new Chinese massage technique named "press-extension" on degenerative lumbar with disc herniation and facet joint dislocation, and provides a biomechanical explanation of this massage technique. Self-developed biomechanical software was used to establish a normal L1-S1 lumbar 3D FE model, which integrated the spine CT and MRI data-based anatomical structure. Then graphic technique is utilized to build a degenerative lumbar FE model with disc herniation and facet joint dislocation. According to the actual press-extension experiments, mechanic parameters are collected to set boundary condition for FE analysis. The result demonstrated that press-extension techniques bring the annuli fibrosi obvious induction effect, making the central nucleus pulposus forward close, increasing the pressure in front part. Study concludes that finite element modelling for lumbar spine is suitable for the analysis of press-extension technique impact on lumbar intervertebral disc biomechanics, to provide the basis for the disease mechanism of intervertebral disc herniation using press-extension technique.

3D object reassembly using region-pair-relation and balanced cluster tree.

BACKGROUND AND OBJECTIVE: Object reassembly is a key technology in scenarios such as surgical planning and broken object restoration. Based on previous research, this work intends to explore the general tasks of 3D object reassembly, including conventional object reconstruction and bone fracture reduction. METHODS: We introduce an efficient and robust region-pair-relation descriptor, which incorporates strong geometric constraints and remains invariant to rotation and translation. We segment the fractured objects using balanced cluster tree, and develop a coarse-to-fine method for object reassembly. The matching quality of potential region contact pairs at different depths is estimated recursively from the root of the tree. Once the best contact pairs are determined, the least squares method is implemented to obtain the matching results. In addition, we also provide a semi-interactive manipulation to deal with the complex objects. RESULTS: For most types of broken objects, our approach can generate high accuracy matching results within 10 s, with the cluster tree depth equals to 11. It allows the automatic reassembly of different-sized fragments. For bone fracture blocks with cancellous structures, a semi-interactive operation is integrated so that the precise matching can also be achieved in 30 s. CONCLUSION: The proposed framework can be expanded to various object reassembly tasks in either automated or semi-automated manner, including the fracture reduction problem which used to be an intensive manual process. Therefore, our work shows significant advantages in medical applications.

Synchrotron Radiation-Based Three-Dimensional Visualization of Angioarchitectural Remodeling in Hippocampus of Epileptic Rats.

Characterizing the three-dimensional (3D) morphological alterations of microvessels under both normal and seizure conditions is crucial for a better understanding of epilepsy. However, conventional imaging techniques cannot detect microvessels on micron/sub-micron scales without angiography. In this study, synchrotron radiation (SR)-based X-ray in-line phase-contrast imaging (ILPCI) and quantitative 3D characterization were used to acquire high-resolution, high-contrast images of rat brain tissue under both normal and seizure conditions. The number of blood microvessels was markedly increased on days 1 and 14, but decreased on day 60 after seizures. The surface area, diameter distribution, mean tortuosity, and number of bifurcations and network segments also showed similar trends. These pathological changes were confirmed by histological tests. Thus, SR-based ILPCI provides systematic and detailed views of cerebrovascular anatomy at the micron level without using contrast-enhancing agents. This holds considerable promise for better diagnosis and understanding of the pathogenesis and development of epilepsy.

Implant-bone interface stress distribution in immediately loaded implants of different diameters: a three-dimensional finite element analysis.

PURPOSE: To establish a 3D finite element model of a mandible with dental implants for immediate loading and to analyze stress distribution in bone around implants of different diameters. MATERIALS AND METHODS: Three mandible models, embedded with thread implants (ITI, Straumann, Switzerland) with diameters of 3.3, 4.1, and 4.8 mm, respectively, were developed using CT scanning and self-developed Universal Surgical Integration System software. The von Mises stress and strain of the implant-bone interface were calculated with the ANSYS software when implants were loaded with 150 N vertical or buccolingual forces. RESULTS: When the implants were loaded with vertical force, the von Mises stress concentrated on the mesial and distal surfaces of cortical bone around the neck of implants, with peak values of 25.0, 17.6 and 11.6 MPa for 3.3, 4.1, and 4.8 mm diameters, respectively, while the maximum strains (5854, 4903, 4344 muepsilon) were located on the buccal cancellous bone around the implant bottom and threads of implants. The stress and strain were significantly lower (p < 0.05) with the increased diameter of implant. When the implants were loaded with buccolingual force, the peak von Mises stress values occurred on the buccal surface of cortical bone around the implant neck, with values of 131.1, 78.7, and 68.1 MPa for 3.3, 4.1, and 4.8 mm diameters, respectively, while the maximum strains occurred on the buccal surface of cancellous bone adjacent to the implant neck, with peak values of 14,218, 12,706, and 11,504 microm, respectively. The stress of the 4.1-mm diameter implants was significantly lower (p < 0.05) than those of 3.3-mm diameter implants, but not statistically different from that of the 4.8 mm implant. CONCLUSIONS: With an increase of implant diameter, stress and strain on the implant-bone interfaces significantly decreased, especially when the diameter increased from 3.3 to 4.1 mm. It appears that dental implants of 10 mm in length for immediate loading should be at least 4.1 mm in diameter, and uniaxial loading to dental implants should be avoided or minimized.

Influence of anisotropy on peri-implant stress and strain in complete mandible model from CT.

This paper reveals the influence of elastic anisotropy for the peri-implant stress and strain in personalized mandible. First, from CT data, the individual geometry of the complete range of mandible was well reproduced, also the separation between cortical and cancellous bone. Then, by an ad hoc automatic mesh generator integrated with anisotropic material assignment function, high quality anisotropic finite element model of the complete mandible was created, with two standard threaded implants embedded in posterior zone. The values of principal stress and strain in surrounding bone were evaluated under buccolingual oblique loading, and compared to that of the same FE model with equivalent isotropic material. Results of the analyses demonstrated that the percentage increase of stress and strain in anisotropic case reached up to 70%. It is concluded that anisotropy has significant effects on peri-implant stress and strain and careful consideration should be given to its use in biomechanical FE studies.

Automatic liver vessel segmentation using 3D region growing and hybrid active contour model.

This paper proposes a new automatic method for liver vessel segmentation by exploiting intensity and shape constraints of 3D vessels. The core of the proposed method is to apply two different strategies: 3D region growing facilitated by bi-Gaussian filter for thin vessel segmentation, and hybrid active contour model combined with K-means clustering for thick vessel segmentation. They are then integrated to generate final segmentation results. The proposed method is validated on abdominal computed tomography angiography (CTA) images, and obtains an average accuracy, sensitivity, specificity, Dice, Jaccard, and RMSD of 98.2%, 68.3%, 99.2%, 73.0%, 66.1%, and 2.56 mm, respectively. Experimental results show that our method is capable of segmenting complex liver vessels with more continuous and complete thin vessel details, and outperforms several existing 3D vessel segmentation algorithms.

Anisotropic finite element modeling for patient-specific mandible.

This paper presents an ad hoc modular software tool to quasi-automatically generate patient-specific three-dimensional (3D) finite element (FE) model of the human mandible. The main task is taking into account the complex geometry of the individual mandible, as well as the inherent highly anisotropic material law. At first, by computed tomography data (CT), the individual geometry of the complete range of mandible was well reproduced, also the separation between cortical and cancellous bone. Then, taking advantage of the inherent shape nature as 'curve' long bone, the algorithm employed a pair of B-spline curves running along the entire upper and lower mandible borders as auxiliary baselines, whose directions are also compatible with that of the trajectory of maximum material stiffness throughout the cortical bone of the mandible. And under the guidance of this pair of auxiliary baselines, a sequence of B-spline surfaces were interpolated adaptively as curve cross-sections to cut the original geometry. Following, based on the produced curve contours and the corresponding curve cross-section surfaces, quite well structured FE volume meshes were constructed, as well as the inherent trajectory vector fields of the anisotropic material (orthotropic for cortical bone and transversely isotropic for cancellous bone). Finally, a sensitivity analysis comprising various 3D FE simulations was carried out to reveal the relevance of elastic anisotropy for the load carrying behavior of the mandible.

Semi-automatic segmentation of femur based on harmonic barrier.

BACKGROUND AND OBJECTIVE: Segmentation of the femur from the hip joint in computed tomography (CT) is an important preliminary step in hip surgery planning and simulation. However, this is a time-consuming and challenging task due to the weak boundary, the varying topology of the hip joint, and the extremely narrow or blurred space between the femoral head and the acetabulum. To address these problems, this study proposed a semi-automatic segmentation framework based on harmonic fields for accurate segmentation. METHODS: The proposed method comprises three steps. First, with high-level information provided by the user, shape information provided by neighboring slices as well as the statistical information in the mask, a region selection method is proposed to effectively locate joint space for the harmonic field. Second, incorporated with an improved gradient, the harmonic field is used to adaptively extract a curve as the barrier that separates the femoral head from the acetabulum accurately. Third, a divide and conquer segmentation strategy based on the harmonic barrier is used to combine the femoral head part and body part as the final segmentation result. RESULTS: We have tested 40 hips with considerately narrow or disappeared joint spaces. The experimental results are evaluated based on Jaccard, Dice, directional cut discrepancy (DCD) and receiver operating characteristic (ROC), and we achieve the higher Jaccard of 84.02%, Dice of 85.96%, area under curve (AUC) of 89.3%, and the lower error with DCD of 0.52mm. The effective ratio of our method is 79.1% even for cases with severe malformation. The results show that our method performs best in terms of effectiveness and accuracy on the whole data set. CONCLUSIONS: The proposed method is efficient to segment femurs with narrow joint space. The accurate segmentation results can assist the physicians for osteoarthritis diagnosis in future.

Liver vessel segmentation and identification based on oriented flux symmetry and graph cuts.

BACKGROUND AND OBJECTIVE: Accurate segmentation of liver vessels from abdominal computer tomography angiography (CTA) volume is very important for liver-vessel analysis and living-related liver transplants. This paper presents a novel liver-vessel segmentation and identification method. METHODS: Firstly, an anisotropic diffusion filter is used to smooth noise while preserving vessel boundaries. Then, based on the gradient symmetry and antisymmetry pattern of vessel structures, optimal oriented flux (OOF) and oriented flux antisymmetry (OFA) measures are respectively applied to detect liver vessels and their boundaries, and further to slenderize vessels. Next, according to vessel geometrical structure, a centerline extraction measure based on height ridge traversal and leaf node line-growing (LNLG) is proposed for the extraction of liver-vessel centerlines, and an intensity model based on fast marching is integrated into graph cuts (GCs) for effective segmentation of liver vessels. Finally, a distance voting mechanism is applied to separate the hepatic vein and portal vein. RESULTS: The experiment results on abdominal CTA images show that the proposed method can effectively segment liver vessels, achieving an average accuracy, sensitivity, and specificity of 97.7%, 79.8%, and 98.6%, respectively, and has a good performance on thin-vessel extraction. CONCLUSIONS: The proposed method does not require manual selection of the centerlines and vessel seeds, and can effectively segment liver vessels and identify hepatic vein and portal vein.

Biomechanics of the sclera and effects on intraocular pressure.

Accumulating evidence indicates that glaucoma is a multifactorial neurodegenerative disease characterized by the loss of retinal ganglion cells (RGC), resulting in gradual and progressive permanent loss of vision. Reducing intraocular pressure (IOP) remains the only proven method for preventing and delaying the progression of glaucomatous visual impairment. However, the specific role of IOP in optic nerve injury remains controversial, and little is known about the biomechanical mechanism by which elevated IOP leads to the loss of RGC. Published studies suggest that the biomechanical properties of the sclera and scleral lamina cribrosa determine the biomechanical changes of optic nerve head, and play an important role in the pathologic process of loss of RGC and optic nerve damage. This review focuses on the current understanding of biomechanics of sclera in glaucoma and provides an overview of the possible interactions between the sclera and IOP. Treatments and interventions aimed at the sclera are also discussed.

Influence of Trabecular Bone on Peri-Implant Stress and Strain Based on Micro-CT Finite Element Modeling of Beagle Dog.

The objective of this investigation is to analyze the influence of trabecular microstructure modeling on the biomechanical distribution of the implant-bone interface. Two three-dimensional finite element mandible models, one with trabecular microstructure (a refined model) and one with macrostructure (a simplified model), were built. The values of equivalent stress at the implant-bone interface in the refined model increased compared with those of the simplified model and strain on the contrary. The distributions of stress and strain were more uniform in the refined model of trabecular microstructure, in which stress and strain were mainly concentrated in trabecular bone. It was concluded that simulation of trabecular bone microstructure had a significant effect on the distribution of stress and strain at the implant-bone interface. These results suggest that trabecular structures could disperse stress and strain and serve as load buffers.

NiMoO4 nanofibres designed by electrospining technique for glucose electrocatalytic oxidation.

Electrochemical oxidation of glucose is the guarantee to realize nonenzymatic sensing of glucose, but greatly hindered by the slow kinetics of its oxidation process. Herein, various nanomaterials were designed as catalysts to accelerate glucose oxidation reaction. However, how to effectively build an excellent platform for promoting the glucose oxidation is still a great challenge. In our work, 1D CaMoO4 and NiMoO4 nanofibres with same morphologies and sub-microstructures were fabricated by electrospinning technique in the first time, and explored to modify the detection electrodes of nonenzymatic glucose sensors. The electrochemical results indicated that the NiMoO4 based sensor exhibited a good catalytic activity toward glucose including the low response potential (0.5 V), high sensitivity(193.8 µA mM(-1) cm(-2)) with a linear response region of 0.01-8 mM, low detection limit (4.6 µM) and fast response time (2 s), all of which are superior to the corresponding values of CaMoO4 nanofibres and even higher than those of most reported NiO and Co3O4 catalysts, which is due to the NiMoO4 nanofibres are not only advantageous to electron transfer, but can mediated the electrocatalytic reaction of glucose. This work should provide a new pathway for the design of advanced glucose catalysts for nonenzymatic sensor.

Automatic Tooth Segmentation of Dental Mesh Based on Harmonic Fields.

An important preprocess in computer-aided orthodontics is to segment teeth from the dental models accurately, which should involve manual interactions as few as possible. But fully automatic partition of all teeth is not a trivial task, since teeth occur in different shapes and their arrangements vary substantially from one individual to another. The difficulty is exacerbated when severe teeth malocclusion and crowding problems occur, which is a common occurrence in clinical cases. Most published methods in this area either are inaccurate or require lots of manual interactions. Motivated by the state-of-the-art general mesh segmentation methods that adopted the theory of harmonic field to detect partition boundaries, this paper proposes a novel, dental-targeted segmentation framework for dental meshes. With a specially designed weighting scheme and a strategy of a priori knowledge to guide the assignment of harmonic constraints, this method can identify teeth partition boundaries effectively. Extensive experiments and quantitative analysis demonstrate that the proposed method is able to partition high-quality teeth automatically with robustness and efficiency.

Interactive tooth partition of dental mesh base on tooth-target harmonic field.

The accurate tooth partition of dental mesh is a crucial step in computer-aided orthodontics. However, tooth boundary identification is not a trivial task for tooth partition, since different shapes and their arrangements vary substantially among common clinical cases. Though curvature field is traditionally used for identifying boundaries, it is normally not reliable enough. Other methods may improve the accuracy, but require intensive user interaction. Motivated by state-of-the-art general interactive mesh segmentation methods, this paper proposes a novel tooth-target partition framework that employs harmonic fields to partition teeth accurately and effectively. In addition, a refining strategy is introduced to successfully segment teeth from the complicated dental model with indistinctive tooth boundaries on its lingual side surface, addressing an issue that had not been solved properly before. To utilise high-level information provided by the user, smart and intuitive user interfaces are also proposed with minimum interaction. In fact, most published interactive methods specifically designed for tooth partition are lacking efficient user interfaces. Extensive experiments and quantitative analyses show that our tooth partition method outperforms the state-of-the-art approaches in terms of accuracy, robustness and efficiency.

Influence of orthotropy on biomechanics of peri-implant bone in complete mandible model with full dentition.

OBJECTIVE: The study was to investigate the impact of orthotropic material on the biomechanics of dental implant, based on a detailed mandible with high geometric and mechanical similarity. MATERIALS AND METHODS: Multiple data sources were used to elaborate detailed biological structures and implant CAD models. In addition, an extended orthotropic material assignment methodology based on harmonic fields was used to handle the alveolar ridge region to generate compatible orthotropic fields. The influence of orthotropic material was compared with the commonly used isotropic model and simplified orthotropic model. RESULTS: The simulation results showed that the values of stress and strain on the implant-bone interface almost increased in the orthotropic model compared to the isotropic case, especially for the cancellous bone. However, the local stress concentration was more obvious in the isotropic case compared to that in orthotropic case. The simple orthotropic model revealed irregular stress and strain distribution, compared to the isotropic model and the real orthotropic model. The influence of orthotropy was little on the implant, periodontal ligament, tooth enamel, and dentin. CONCLUSION: The orthotropic material has significant effect on stress and strain of implant-bone interface in the mandible, compared with the isotropic simulation. Real orthotropic mechanical properties of mandible should be emphasized in biomechanical studies of dental implants.

[Finite element method analysis of anteflexion traction on various angles for the treatment of cervical spine].

OBJECTIVE: To analyze the data of angle variation on traction based on a finite element model of complete cervical spine with straight physiological curvature, and try to give experimental reference and suggestion in treating cervical spondylosis. METHODS: A 43-year-old female patient with straight cervical spine was chosen and the CT scan data were collected. By using specially designed modeling system, a high quality finite element model of complete cervical spine with straight physiological curvature is generated,which included ligament and muscle according to anatomy. After the model was confirmed, traction was loaded with angle 0 degree, anterior 5 degrees, 10 degrees, 15 degrees, 20 degrees, 25 degrees, to observe the data of distance change on between adjacent intervertebral foramen, processus articularis, uncovertedral joint, intervertebral discs, and stress of anulus fibrosus and nucleus pulposus. RESULTS: When the angle was 0 degrees-15 degrees, the distance between intervertebral foramen, Luschka joint and processus articularis posterioris was enlarged, the tensile stress was adequate and compressive stress was small. It met the clinical requests. CONCLUSION: 0 degree-15 degrees anterior position is suggested for the treatment of cervical spondylosis.

[Construction and validation of a three-dimensional finite element model of cranio-maxillary complex with sutures in unilateral cleft lip and palate patient].

PURPOSE: To explore an effective method to construct and validate a finite element model of the unilateral cleft lip and palate(UCLP) craniomaxillary complex with sutures, which could be applied in further three-dimensional finite element analysis (FEA). METHODS: One male patient aged 9 with left complete lip and palate cleft was selected and CT scan was taken at 0.75mm intervals on the skull. The CT data was saved in Dicom format, which was, afterwards, imported into Software Mimics 10.0 to generate a three-dimensional anatomic model. Then Software Geomagic Studio 12.0 was used to match, smoothen and transfer the anatomic model into a CAD model with NURBS patches. Then, 12 circum-maxillary sutures were integrated into the CAD model by Solidworks (2011 version). Finally meshing by E-feature Biomedical Modeler was done and a three-dimensional finite element model with sutures was obtained. A maxillary protraction force (500 g per side, 20° downward and forward from the occlusal plane) was applied. Displacement and stress distribution of some important craniofacial structures were measured and compared with the results of related researches in the literature. RESULTS: A three-dimensional finite element model of UCLP craniomaxillary complex with 12 sutures was established from the CT scan data. This simulation model consisted of 206 753 individual elements with 260 662 nodes, which was a more precise simulation and a better representation of human craniomaxillary complex than the formerly available FEA models. By comparison, this model was proved to be valid. CONCLUSIONS: It is an effective way to establish the three-dimensional finite element model of UCLP cranio-maxillary complex with sutures from CT images with the help of the following softwares: Mimics 10.0, Geomagic Studio 12.0, Solidworks and E-feature Biomedical Modeler.

Physical modeling with orthotropic material based on harmonic fields.

Although it is well known that human bone tissues have obvious orthotropic material properties, most works in the physical modeling field adopted oversimplified isotropic or approximated transversely isotropic elasticity due to the simplicity. This paper presents a convenient methodology based on harmonic fields, to construct volumetric finite element mesh integrated with complete orthotropic material. The basic idea is taking advantage of the fact that the longitudinal axis direction indicated by the shape configuration of most bone tissues is compatible with the trajectory of the maximum material stiffness. First, surface harmonic fields of the longitudinal axis direction for individual bone models were generated, whose scalar distribution pattern tends to conform very well to the object shape. The scalar iso-contours were extracted and sampled adaptively to construct volumetric meshes of high quality. Following, the surface harmonic fields were expanded over the whole volumetric domain to create longitudinal and radial volumetric harmonic fields, from which the gradient vector fields were calculated and employed as the orthotropic principal axes vector fields. Contrastive finite element analyses demonstrated that elastic orthotropy has significant effect on simulating stresses and strains, including the value as well as distribution pattern, which underlines the relevance of our orthotropic modeling scheme.