RESUMEN
Matteuccia struthiopteris is one of the most globally consumed edible ferns and widely used in folk medicine. Reports mainly focus on young fronds and the rhizome which are common edible medicinal parts. However, there are few detailed reports on other parts. Therefore, the volatile components of different parts based on HS-SPME-GC-MS were identified, and total flavonoid contents, antioxidant activities and acetylcholinesterase inhibitory activities were compared in order to reveal the difference of volatile components and potential medicinal value of different parts. The results showed that total flavonoid contents, antioxidant activities and volatile components of different parts were obviously different. The crozier exhibited the strongest antioxidant activities, but only underground parts exhibited a dose-dependent inhibition potential against AChE. Common volatile compounds were furfural and 2-furancarboxaldehyde, 5-methyl-. In addition, it was found that some volatile components from adventitious root, trophophyll, sporophyll and petiole were important ingredients in food, cosmetics, industrial manufacturing and pharmaceutical applications.
Asunto(s)
Acetilcolinesterasa , Antioxidantes , Cromatografía de Gases y Espectrometría de Masas/métodos , Flavonoides , Microextracción en Fase Sólida/métodosRESUMEN
BACKGROUND: The rapid development of industrialization in printed circuit board (PCB) warrants more complexity and integrity, which entails an essential procedure of PCB inspection. X-ray computed laminography (CL) enables inspection of arbitrary regions for large-sized flat objects with high resolution. PCB inspection based on CL imaging is worthy of exploration. OBJECTIVE: This work aims to extract PCB circuit layer information based on CL imaging through image segmentation technique. METHODS: In this work, an effective and applicable segmentation model for PCB CL images is established for the first time. The model comprises two components, with one integrating edge diffusion and l0 smoothing to filter CL images with aliasing artifacts, and the other being the fuzzy energy-based active contour model driven by local pre-fitting energy to segment the filtered images. RESULT: The proposed model is able to suppress aliasing artifacts in the PCB CL images and has good performance on images of different circuit layers. CONCLUSIONS: Results of the simulation experiment reveal that the method is capable of accurate segmentation under ideal scanning condition. Testing of different PCBs and comparison of different segmentation methods authenticate the applicability and superiority of the model.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Procesamiento de Imagen Asistido por Computador/métodos , Tomografía Computarizada por Rayos X/métodos , Artefactos , Algoritmos , Modelos TeóricosRESUMEN
With the popularization of chest computed tomography (CT) lung cancer screening, the detection rate of peripheral pulmonary nodules is increasing day by day. Some patients could make clear diagnoses and receive early treatment by obtaining biopsy specimens. Transbronchial lung biopsy (TBLB) is one of the non-surgical biopsy methods for peripheral pulmonary nodules, which has less trauma and lower incidence of complications compared to percutaneous thoracic needle biopsy (PTNB). However, the diagnostic rate of TBLB is about 70%, which is still inferior to that of PTNB, which is about 90%. Since 2018, robot assisted bronchoscopy systems have been applied in clinical practice. This article reviews their application in further improving the diagnostic rate of peripheral pulmonary nodules by TBLB.â©.
Asunto(s)
Broncoscopía , Neoplasias Pulmonares , Humanos , Broncoscopía/métodos , Neoplasias Pulmonares/patología , Neoplasias Pulmonares/diagnóstico , Procedimientos Quirúrgicos Robotizados/métodos , Biopsia/métodos , Nódulo Pulmonar Solitario/patología , Nódulo Pulmonar Solitario/diagnóstico , Nódulo Pulmonar Solitario/diagnóstico por imagenRESUMEN
So far, the monoclonal hypothesis of tumor occurrence and development cannot be justified. The genetic diversity selection hypothesis for the occurrence and development of lung cancer links Mendelian genetics with Darwin's theory of evolution, suggesting that the genetic diversity of tumor cell populations with polyclonal origins-monoclonal selection-subclonal expansion is the result of selection pressure. Normal cells acquire mutations in oncogenic driver genes and have a selective advantage over other cells, becoming tumor initiating cells; In the interaction with the tumor microenvironment (TME), the vast majority of initiating cells are recognized and killed by the human immune system. If immune escape occurs, the incidence of malignant tumors will greatly increase, and subclonal expansion, intratumour heterogeneity, etc. will occur. This article proposed the hypothesis of genetic diversity selection and analyzed its clinical significance.â©.
Asunto(s)
Neoplasias Pulmonares , Humanos , Neoplasias Pulmonares/genética , Relevancia Clínica , Evolución Molecular , Mutación , Microambiente TumoralRESUMEN
Equisetum is one of the oldest extant group vascular plants and is considered to be the key to understanding vascular plant evolution. Equisetum is distributed almost all over the world and has a high degree of adaptability to different environments. Despite the fossil record of horsetails (Equisetum, Equisetaceae) dating back to the Carboniferous, the phylogenetic relationship of this genus is not well, and the chloroplast evolution in Equisetum remains poorly understood. In order to fill this gap, we sequenced, assembled, and annotated the chloroplast genomes of 12 species of Equisetum, and compared them to 13 previously published vascular plants chloroplast genomes to deeply examine the plastome evolutionary dynamics of Equisetum. The chloroplast genomes have a highly conserved quadripartite structure across the genus, but these chloroplast genomes have a lower GC content than other ferns. The size of Equisetum plastomes ranges from 130,773 bp to 133,684 bp and they encode 130 genes. Contraction/expansion of IR regions and the number of simple sequences repeat regions underlie large genomic variations in size among them. Comparative analysis revealed we also identified 13 divergence hotspot regions. Additionally, the genes accD and ycf1 can be used as potential DNA barcodes for the identification and phylogeny of the genus Equisetum. Twelve photosynthesis-related genes were specifically selected in Equisetum. Comparative genomic analyses implied divergent evolutionary patterns between Equisetum and other ferns. Phylogenomic analyses and molecular dating revealed a relatively distant phylogenetic relationship between Equisetum and other ferns, supporting the division of pteridophyte into Lycophytes, Equisetaceae and ferns. The results show that the chloroplast genome can be used to solve phylogenetic problems within or between Equisetum species, and also provide genomic resources for the study of Equisetum systematics and evolution.
RESUMEN
Compared with circular, arched, and pipe-arched soil-steel structures, box-type soil-steel structures (BTSSSs) have the advantages of high cross-section utilization and low cover depth. However, the degree of influence of the crown and haunch radii on the mechanical performance of BTSSSs is still unclear. Therefore, two full-scale BTSSS models with a span of 6.6 m and a rise of 3.7 m but with different crown and haunch radii were established, and the mechanical properties during backfilling and under live load were tested. Afterward, 2D finite element models (FEMs) were established using the ABAQUS 2020 software and verified using the test data. The influence of cross-section geometric parameters on mechanical performance was analyzed by using the FEM, and a more accurate formula for calculating the bending moment during backfilling was proposed. The results show that the BTSSS with a smaller crown radius has a stronger soil-steel interaction, which promotes more uniform stress on the structure and makes the structure have smaller relative deformations, bending moments, and earth pressure. The span and arch height greatly influence the bending moment and deformation of the structure. Based on the CHBDC, the crown and haunch radii were included in the revised calculation formula.
RESUMEN
@#Objective To analyze the risk factors of myasthenia gravis crisis after thymectomy with myasthenia gravis (MG). Methods Sixty-five myasthenia gravis patients who had myasthenia crisis after thymectomy in Xuanwu Hospital, Capital Medical University from June 2006 to June 2019 were retrospectively enrolled, including 31 males and 34 females, aged 15-78 (45.7±17.8) years. The relationship between myasthenia crisis after thymectomy and surgical option, operation time, pathological type, et al. were anylyzed. Results Operation time and pathological type were the predictive factors of postoperative myasthenic crisis. The area under receiver operating characteristic curve (AUC) of MG type (Osserman) was 0.676, the cut-off value wasⅡB type, the sensitivity was 37.5%, the specificity was 90.5%, and the Youden’s index was 0.280. The AUC of thymoma stage (Masaoka) was 0.682, cut-off value was stageⅡ, sensitivity was 62.5%, specificity was 66.7%, and Youden’s index was 0.292. The AUC of blood loss was 0.658, the cut-off value was 90 mL, the sensitivity was 87.5%, the specificity was 69.6%, and the Youden’s index was 0.304. Conclusion Preoperative MG classification, pathological type, operation time and blood loss are the risk factors of postoperative myasthenic crisis. Therefore, adequate preoperative preparation, rapid and careful intraoperative operation and active postoperative management can reduce the occurrence of postoperative myasthenic crisis.
RESUMEN
@#Peripheral pulmonary lesions (PPLs) are generally considered as lesions in the peripheral one-third of the lung. A computed tompgraphy (CT) guided transthoracic needle aspiration/biopsy or transbronchial approach using a bronchoscope has been the most generally accepted methods. Navigation technique can effectively improve the diagnosis rate of peripheral pulmonary lesions, reduce the incidence of complications, shorten the time of diagnosis, and make the patients get timely and effective treatment.
RESUMEN
@#Objective To study the short-term outcome and safety of radiofrequency ablation (RFA) combined with recombinant human endostatin (endostar) for non-small cell lung cancer (NSCLC) patients. Methods Between December 2013 and December 2014, 80 consecutive patients (50 males, 30 females) with biopsy-proved NSCLC were divided into two groups: a RFA combined treatment group (RFA combined with endostar, 60 patients, 38 males, 22 females, mean age at 67.77±10.43 years) and a RFA alone group (20 patients, 12 males, 8 females, mean age at 67.35±9.82 years). The RFA combined treatment group was divided into three groups according to vascular normalization window of endostar and 20 patients in each group: a combined treatment group 1 (transfusion of endostar after RFA), a combined treatment group 2 (transfusion of endostar for 1 to 3 d before RFA) and a combined treatment group 3 (transfusion of endostar for 4 to 7 d before RFA). The CT scan of the chest was followed up after the treatment, local recurrence and safety was observed. Results There was a statistical difference in local recurrence time among groups (χ2 = 11.05, P =0.011). The effect of the combined treatment group is better than that of the radiofrequency ablation therapy alone group. And in the recombinant human endostatin of tumor vascular normalization time best combination therapy was observed in the near future effect compared with the radiofrequency ablation therapy alone. In this study common complications were associated with radiofrequency ablation. No recombinant human endostatin related complication was found. There was no satistical difference in safety between the combined treatment group and the radiofrequency ablation therapy group (χ2= 0.889, P > 0.05). Conclusion RFA combined with endostar is safe and effective for non-small cell lung cancer.