RESUMEN
The construction of structurally well-defined supramolecular hosts to accommodate catalytically active species within a cavity is a promising way to address catalyst deactivation. The resulting supramolecular catalysts can significantly improve the utilization of catalytic sites, thereby achieving a highly efficient chemical conversion. In this study, the Co-metalated phthalocyanine (Pc-Co) was successfully confined within a tetragonal prismatic metallacage, leading to the formation of a distinctive type of supramolecular photocatalyst (Pc-Co@Cage). The host-guest architecture of Pc-Co@Cage was unambiguously elucidated by single-crystal X-ray diffraction (SCXRD), NMR, and ESI-TOF-MS, revealing that the single cobalt active site can be thoroughly isolated within the space-restricted microenvironment. In addition, we found that Pc-Co@Cage can serve as a homogeneous supramolecular photocatalyst that displays high CO2 to CO conversion in aqueous media under visible light irradiation. This supramolecular photocatalyst exhibits an obvious improvement in activity (TONCO = 4175) and selectivity (SelCO = 92%) relative to the nonconfined Pc-Co catalyst (TONCO = 500, SelCO = 54%). The present strategy provided a rare example for the construction of a highly active, selective, and stable photocatalyst for CO2 reduction through a cavity-confined molecular catalyst within a discrete metallacage.
RESUMEN
Lung adenocarcinoma (LUAD) severely affects human health, and cisplatin (DDP) resistance is the main obstacle in LUAD treatment, the mechanism of which is unknown. Bioinformatics methods were utilized to predict expression and related pathways of AURKB in LUAD tissues, as well as the upstream regulated microRNAs. qRT-PCR assayed expression of AURKB and microRNA-486-5p. RIP and dual-luciferase experiments verified the binding and interaction between the two genes. CCK-8 was used to detect cell proliferation ability and IC50 values. Flow cytometry was utilized to assess the cell cycle. Comet assay and western blot tested DNA damage and γ-H2AX protein expression, respectively. In LUAD, AURKB was upregulated, but microRNA-486-5p was downregulated. The targeted relationship between the two was confirmed by RIP and dual-luciferase experiments. Cell experiments showed that AURKB knock-down inhibited cell proliferation, reduced IC50 values, induced cell cycle arrest, and caused DNA damage. The rescue experiment presented that high expression of microRNA-486-5p could weaken the impact of AURKB overexpression on LUAD cell behavior and DDP resistance. microRNA-486-5p regulated DNA damage to inhibit DDP resistance in LUAD by targeting AURKB, implying that microRNA-486-5p/AURKB axis may be a possible therapeutic target for DDP resistance in LUAD patients.
Asunto(s)
Adenocarcinoma del Pulmón , Neoplasias Pulmonares , MicroARNs , Humanos , Cisplatino/farmacología , Adenocarcinoma del Pulmón/tratamiento farmacológico , Adenocarcinoma del Pulmón/genética , Daño del ADN , MicroARNs/genética , Proliferación Celular , Neoplasias Pulmonares/tratamiento farmacológico , Neoplasias Pulmonares/genética , Luciferasas , Línea Celular Tumoral , Aurora Quinasa BRESUMEN
Aptamer-based detection targeting glycoconjugates has attracted significant attention for its remarkable potential in identifying structural changes in saccharides in different stages of various diseases. However, the challenges in screening aptamers for small carbohydrates or glycoconjugates, which contain highly flexible and diverse glycosidic bonds, have hindered their application and commercialization. In this study, we investigated the binding conformations between three glycosidic bond-containing small molecules (GlySMs; glucose, N-acetylneuraminic acid, and neomycin) and their corresponding aptamers in silico, and analyzed factors contributing to their binding affinities. Based on the findings, a novel binding mechanism was proposed, highlighting the central role of the stem structure of the aptamer in binding and recognizing GlySMs and the auxiliary role of the mismatched bases in the adjacent loop. Guided by this binding mechanism, an aptamer with a higher 6'-sialyllactose binding affinity was designed, achieving a KD value of 4.54 ± 0.64 µM in vitro through a single shear and one mutation. The binding mechanism offers crucial guidance for designing high-affinity aptamers, enhancing the virtual screening efficiency for GlySMs. This streamlined workflow filters out ineffective binding sites, accelerating aptamer development and providing novel insights into glycan-nucleic acid interactions.
Asunto(s)
Aptámeros de Nucleótidos , Glicósidos , Aptámeros de Nucleótidos/química , ADN de Cadena Simple , Sitios de Unión , Glicoconjugados , Técnica SELEX de Producción de AptámerosRESUMEN
Recently, it has become imperative to develop high energy density as well as high safety lithium-ion batteries (LIBS) to meet the growing energy demand. Among the anode materials used in LIBs, the currently used commercial graphite has low capacity and is a safety hazard due to the formation of lithium dendrites during the reaction. Among the transition metal oxide (TMO) anode materials, TMO based on the intercalation reaction mechanism has a more stable structure and is less prone to volume expansion than TMO based on the conversion reaction mechanism, especially the niobium-based oxide in it has attracted much attention. Niobium-based oxides have a high operating potential to inhibit the formation of lithium dendrites and lithium deposits to ensure safety, and have stable and fast lithium ion transport channels with excellent multiplicative performance. This review summarizes the recent developments of niobium-based oxides as anode materials for lithium-ion batteries, discusses the special structure and electrochemical reaction mechanism of the materials, the synthesis methods and morphology of nanostructures, deficiencies and improvement strategies, and looks into the future developments and challenges of niobium-based oxide anode materials.
RESUMEN
Frost formation and accumulation can have catastrophic effects on a wide range of industrial activities. Hence, a dual-scale surface with a stable Cassie-Baxter state is developed to mitigate the frosting problem by utilizing direct laser interference lithography assisted with hydrothermal treatment. The high Laplace pressure tolerance under the evaporation stimulus and prolonged Cassie-Baxter state maintenance under the condensation stimulus demonstrate the stable Cassie-Baxter state. The dual-scale surface exhibits a lengthy frost-delaying time of up to 5277 s at -7 °C due to the stable Cassie-Baxter state. The self-removal of frost is achieved by promoting the mobility of frost melts driven by the released interfacial energy. In addition, the dense flocculent frost layer is observed on the single-scale micro surface, whereas the sparse pearl-shaped frost layer with many voids is obtained on the dual-scale surface. This work will aid in understanding the frosting process on various-scale superhydrophobic surfaces and in the design of antifrosting surfaces.
RESUMEN
Currently, it remains a challenge to make comprehensive improvements to overcome the disadvantages of volume expansion, Li2O irreversibility and low conductivity of SnO2. Heterostructure construction has been investigated as an effective strategy to promote electron transfer and surface reaction kinetics, leading to high electrochemical performance. Herein, NiO/SnO2 heterojunction modified nitrogen doped graphene (NiO/SnO2@NG) anode materials were prepared using hydrothermal and carbonization techniques. Based on the excellent structural advantages, sufficiently small NiO/SnO2 heterojunction nanoparticles increase the interfacial density to promote Li2O decomposition, and the built-in electric field accelerates the charge transport rate to improve the conductivity. The three-dimensional porous graphene framework effectively mitigates volume expansion during cycling and stabilizes the reactive interface of electrode materials. The results show that the NiO/SnO2@NG mixture has high reversible specific capacity (938.8 mA h g-1 after 450 cycles at 0.1 A g-1), superior multiplicity performance (374.5 mA h g-1 at 3.0 A g-1) and long cycle life (685.3 mA h g-1 after 1000 cycles at 0.5 A g-1). Thus, this design of introducing NiO to form heterostructures with SnO2 is directly related to enhancing the electrochemical performance of lithium-ion batteries (LIBs).
RESUMEN
The stannic oxide (SnO2) anode expands in volume during cycling causing a decrease in reversible capacity. In this work, we generated a spherical SnO2/Sn heterojunction with core-shell structure composites encapsulated by graphene (SnO2/Sn/G) in situ using a simple one-step hydrothermal and subsequent annealing process. SnO2/Sn heterojunction nanospheres dispersed in a porous graphene framework accelerate the diffusion kinetics of electrons and ions. In addition, the structure plays a key role in mitigating large volume changes and nanostructure agglomeration. As a result, SnO2/Sn/G exhibits excellent performance as an anode material for lithium-ion batteries (LIBs), maintaining a reversible specific capacity of 720.6 mA h g-1 even after 600 cycles at a current density of 0.5 A g-1.
RESUMEN
To discover and develop new insecticides of the phenylpyrazole class, a series of heptafluoroisopropyl N-phenylpyrazole aryl amide compounds bearing cyanoalkyl groups were synthesized based on the lead compound nicofluprole. Their structures were established by HRMS, 1H NMR and 13C NMR. Bioassay results indicated that several of these compounds exhibited remarkable acaricidal and insecticidal activities. The LC50 values for compounds A1, A2 and A5 against Tetranychus cinnabarinus (T. cinnabarinus) were 1.7-4.2 times lower than that of nicofluprole (3.124 mg/L). Compounds A1, A2, A4 and A7 against Myzus persicae (M. persicae) had LC50 values of 0.261, 1.292, 0.589 and 1.133 mg/L respectively, exceeding that of nicofluprole (LC50 = 4.200 mg/L). Some compounds also demonstrated good insecticidal activity against Plutella xylostella (P. xylostella). For example, compounds A1-A4, A6, and A7 had a mortality rate of 100 % at a low concentration of 1.25 mg/L, which was comparable to nicofluprole (93.3%). Compound A1 exhibited insecticidal activity against Chilo suppressalis (C. suppressalis) with an LC50 value of 2.271 mg/L, which was superior to both nicofluprole (6.021 mg/L) and the positive control broflanilide (6.895 mg/L). Taking compound A5 as a representative, we tested the insecticidal activity against Aphis fabae (A. fabae), Aphis gossypii Glover (A. gossypii Glover), Nilaparvata lugens (N. lugens) and Laodelphax striatellus (L. striatellus) at 10 mg/L, and our results revealed that compound A5 exhibited broad-spectrum insecticidal activity. Molecular docking studies suggested that A1 had a lower binding energy of -7.764 kcal/mol with the P. xylostella gamma-aminobutyric acid receptors (GABAR). Density functional theory calculations (DFT) provided insights into the design of new compounds. This research suggested that the novel phenylpyrazoles featuring cyanoalkyl moieties in this work hold potential as novel insecticides for further research and development.
Asunto(s)
Áfidos , Insecticidas , Animales , Insecticidas/química , Estructura Molecular , Relación Estructura-Actividad , Amidas/farmacología , Amidas/química , Simulación del Acoplamiento Molecular , Pirazoles/química , Diseño de FármacosRESUMEN
Broadband antireflection (AR) is highly significant in a wide range of optical applications, and using a gold (Au) micropattern presents a viable method for controlling the behavior of light propagation. This study investigates a novel, to the best of our knowledge, methodology to achieve broadband AR properties in Au micropatterns. It employed the three-dimensional finite-difference time-domain (FDTD) method to simulate and optimize the design of micropatterns. In contrast, the fabrication of Au micropatterns was carried out using two-beam laser interference lithography (LIL). The fabricated Au micropatterns were characterized by a scanning electron microscope (SEM) and spectroscope to validate their antireflection and transmission properties and evaluate their performance at various wavelengths. The optimized Au micropatterns had a high transmittance rating of 96.2%. In addition, the device exhibits a broad-spectrum antireflective property, covering wavelengths ranging from 400 to 1100 nm. The simulation data and experimentally derived results show comparable patterns. These structures can potentially be employed in many optical devices, such as solar cells and photodetectors, whereby achieving optimal device performance reduced reflection and enhanced light absorption.
RESUMEN
The nuclear receptor gene Ecdysone-induced protein 75 (E75), as the component of ecdysone response genes in the ecdysone signaling pathway, has important regulatory function for insect molting. However, the regulatory function of E75 during the molting process of spider mites is not yet clear. In this study, the expression pattern of E75 in the molting process of the spider mite Tetranychus urticae was analyzed. The results showed that there was a peak at 8 h post-molting, followed by a decline 8 h after entering each respective quiescent stage across various developmental stages. During the deutonymph stage, the expression dynamics of E75, observed at 4-h intervals, indicated that the transcript levels of TuE75 peaked at 24 h, coinciding with the onset of molting in the mites. To investigate the function of TuE75 during the molting process, silencing TuE75 through dsRNA injection into deutonymph mites at the age of 8 h yielded a notable outcome: 78% of the deutonymph mites were unable to progress to the adult stage. Among these phenotypic mites, 37% were incapable of transitioning into the quiescent state and eventually succumbed after a certain period. An additional 41% of the mites successfully entered the quiescent state but encountered difficulties in shedding the old epidermis, leading to eventual mortality. In summary, these results suggested that TuE75 plays a key role in the molting process of T. urticae.
Asunto(s)
Muda , Tetranychidae , Animales , Muda/genética , Ecdisona , Tetranychidae/genética , Receptores Citoplasmáticos y Nucleares/genéticaRESUMEN
Glycans are promising for disease diagnosis since glycan biosynthesis is significantly affected by disease states, and glycosylation changes are probably more pronounced than protein expression during the transformation to the diseased condition. Glycan-specific aptamers can be developed for challenging applications such as cancer targeting; however, the high flexibility of glycosidic bonds and scarcity of studies on glycan-aptamer binding mechanisms increased the difficulty of screening. In this work, the model of interactions between glycans and ssDNA aptamers synthesized based on the sequence of rRNA genes was developed. Our simulation-based approach revealed that paromomycin as a representative example of glycans is preferred to bind base-restricted stem structures of aptamers because they are more critical in stabilizing the flexible structures of glycans. Combined experiments and simulations have identified two optimal mutant aptamers. Our work would provide a potential strategy that the glycan-binding rRNA genes could act as the initial aptamer pools to accelerate aptamer screening. In addition, this in silico workflow would be potentially applied in the more extensive in vitro development and application of RNA-templated ssDNA aptamers targeting glycans.
Asunto(s)
Aptámeros de Nucleótidos , Paromomicina , ADN de Cadena Simple , Aptámeros de Nucleótidos/química , Simulación por Computador , Polisacáridos , Técnica SELEX de Producción de AptámerosRESUMEN
Colorectal cancer (CRC) is one of the most common human malignancies due to its invasiveness and metastasis. Recent studies revealed the pivotal roles of long noncoding RNAs (lncRNAs) in tumorigenesis and progressions of various tumors. However, the biological roles and molecular mechanisms of long intergenic noncoding RNA 00174 (LINC00174) in human CRC remain unclear. Here, we report that LINC00174 expression was higher in human CRC tissues and cell lines than in adjacent normal tissues and a colon epithelial cell line (FHC). High expression of LINC00174 was positively correlated with poor overall and disease-free survival in patients with CRC. Loss- and gain-of-function of LINC00174 demonstrated its critical roles in promoting cell proliferation, apoptosis resistance, migration, and invasion of CRC cells in vitro. Moreover, overexpression of LINC00174 enhanced tumor growth in vivo. Mechanistic experiments revealed that LINC00174 could bind to microRNA (miR)-2467-3p and augment the expression and function of ubiquitin-specific peptidase 21 (USP21). Rescue assays found that miR-2467-3p inhibition can offset the actions of LINC00174 or USP21 knockdown in CRC cells. Additionally, transcriptional factor c-JUN transcriptionally activated LINC00174 expression and mediated LINC00174-induced malignant phenotypes of CRC cell lines. Totally, our findings shed light on a new therapeutic strategy in modulating LINC00174/miR-2467-3p, which may interfere with the expression of USP21, and revealed that LINC00174 could be a new therapeutic target or prognostic marker in CRC.
Asunto(s)
Neoplasias Colorrectales , MicroARNs , ARN Largo no Codificante , Humanos , Línea Celular Tumoral , Movimiento Celular , Proliferación Celular , Neoplasias Colorrectales/metabolismo , Regulación Neoplásica de la Expresión Génica , MicroARNs/genética , MicroARNs/metabolismo , ARN Largo no Codificante/genética , ARN Largo no Codificante/metabolismo , Ubiquitina Tiolesterasa/genética , Ubiquitina Tiolesterasa/metabolismo , Regulación hacia ArribaRESUMEN
The construction of metal-organic cages (MOCs) with specific structures and fluorescence sensing properties is of much importance and challenging. Herein, a novel phenanthroline-based metal-organic cage, [Cd3L3·6MeOH·6H2O] (1), was synthesized by metal-directed assembly of the ligand 3,3'-[(1E,1'E)-(1,10-phenanthroline-2,9-diyl)bis(ethene-2,1-diyl)]dibenzoic acid (H2L) and CdI2 using a solvothermal method. According to single-crystal X-ray analysis, cage 1 exhibits a rare trefoil-shaped structure. Meanwhile, the discrete MOCs are further stacked into a 3D porous supramolecular structure through abundant intermolecular C-H···O interactions. Additionally, through exploration of fluorescence sensing on cations, anions, and antibiotics in aqueous solution, the experimental results indicate that cage 1 has excellent fluorescence sensing abilities for Fe3+, Cr2O72-, and nitrofuran and nitroimidazole antibiotics. The sensing ability of 1 remains unaltered for five cycles toward all analytes. The above results suggested that cage 1 can be considered a potential multiple sensor for the detection of Fe3+, Cr2O72-, and some antibiotics.
RESUMEN
To determine 15 bile acid metabolic products in human serum by liquid chromatography-tandem mass spectrometry (LC/MS/MS) and value their diagnostic outcome in primary biliary cholangitis (PBC). Serum from 20 healthy controls and 26 patients with PBC were collected and went LC/MS/MS analysis of 15 bile acid metabolic products. The test results were analyzed by bile acid metabolomics, and the potential biomarkers were screened and their diagnostic performance was judged by statistical methods such as principal component and partial least squares discriminant analysis and area under curve (AUC). 8 differential metabolites can be screened out: Deoxycholic acid (DCA), Glycine deoxycholic acid (GDCA), Lithocholic acid (LCA), Glycine ursodeoxycholic acid (GUDCA), Taurolithocholic acid (TLCA), Tauroursodeoxycholic acid (TUDCA), Taurodeoxycholic acid (TDCA), Glycine chenodeoxycholic acid (GCDCA). The performance of the biomarkers was evaluated by the AUC, specificity and sensitivity. In conclusion, DCA, GDCA, LCA, GUDCA, TLCA, TUDCA, TDCA and GCDCA were identified as eight potential biomarkers to distinguish between healthy people and PBC patients by multivariate statistical analysis, which provided reliable experimental basis for clinical practice.
Asunto(s)
Ácidos y Sales Biliares , Cirrosis Hepática Biliar , Humanos , Espectrometría de Masas en Tándem/métodos , Ácido Tauroquenodesoxicólico , Cromatografía Liquida/métodos , Glicina , BiomarcadoresRESUMEN
Because of type-II band alignment, interlayer exciton (IX) is found in a van der Waals (vdW) heterostructure (HS) formed by two monolayers of transition-metal dichalcogenides. Manipulation of IXs is of great importance for excitonic integrated devices. Here, we demonstrate that high pressure and tensile strain can be applied to enhance and reduce interlayer coupling of WSe2/WS2 HS, respectively. High pressure induces the transform of intralayer excitons to IX, while tensile strain leads to the transform of IXs to intralayer excitons. In addition, there is a direct-to-indirect band gap transition of WSe2/WS2 HS. The interlayer distance of WSe2/WS2 HS is reduced under high pressure, but it increased under uniaxial tensile strain from first-principles calculations. The calculated band structures explain well the transformation between interlayer and intralayer excitons of WSe2/WS2 HS. This work demonstrates the exchange of interlayer and intralayer excitons and paves the way to manipulate excitons of HS for excitonic applications.
RESUMEN
The giant light-matter interaction induced by van Hove singularities (vHSs) of twisted bilayer graphene (tBLG) is responsible for enhanced optical absorption and strong photoresponse. Here, we investigated the evolution of vHSs in tBLG under pressure by using Raman spectroscopy. Pressure not only induces a blue shift of the G/R band but also tunes the intensity of the G/R band. The blue shift of the G/R band is due to the reduction of the in-plane lattice constant, and the variation of the G/R band intensity is due to the vHSs' shift of tBLG. Moreover, the main band in the absorption spectrum of tBLG is attributed to multiple transitions from valence to conduction bands. Because the ratio of R to G band intensity increases under pressure and the origins of R and G bands are different, we claim that pressure enhances intervalley electron scattering. This study paves the way for pressure engineering of vHS and the corresponding photon-electron-phonon interaction in tBLG.
RESUMEN
Rapid advances in science and engineering, and pervasive adoption of resulting technological products, are influencing every aspect of human living and fueling a growing demand for a workforce that is adequately prepared for the emerging occupations in STEM fields. Educating students for success in the modern technology-rich workplace requires teachers who have the knowledge, comfort, capability, and training to adopt and integrate new technologies for classroom teaching and learning. Thus, to prepare high school teachers for incorporating robotics in their students' education and promoting their understanding of engineering concepts and technology applications, a four-week long robotics workshop was designed and conducted annually for three summers. Examination of changes in the workshop participants' levels of robotics self-efficacy, familiarity, and content knowledge, as well as analysis of outcomes of robotics capstone projects and end-of-year contests, is suggestive of study findings being promising for education researchers and professional development providers interested in leveraging the potential of robotics in STEM education.
RESUMEN
In view of the environmental pollution caused by the widespread use of reactive dyes in the printing and dyeing industry, the modified cotton fabric was loaded with the extremely stable metal-organic frame (MOF) material UiO-66 for removing reactive dyes from colored wastewater. UiO-66/cotton fabric was prepared by in situ synthesis, and its surface morphology and structure were analyzed by XRD, SEM, BET, and XPS. The adsorption performance of UiO-66/cotton fabric on reactive dyes was investigated by adsorbent dosage, adsorption time and temperature, dye concentration, pH, and so on. The results indicated that the adsorption equilibrium time of UiO-66/cotton fabric on reactive orange 16 was 120 min, and the removal rate was about 98%. The adsorption process belongs to simple molecular layer chemisorption and can be regarded as a spontaneous heat absorption reaction, which was consistent with the proposed secondary kinetic model and Langmuir isothermal adsorption model. In addition, the reactive dyes with a higher molecular weight of each sulfonic acid group are more hydrophobic, and the dyes are more likely to aggregate and deposit on the adsorbent surface by electrostatic attraction, hydrogen bonding, and π-π accumulation. Therefore, this work provides a potential UiO-66/cotton fabric application for the effective adsorption of reactive dyes in textile wastewater.
RESUMEN
Molecular motors are at the heart of cellular machinery, and they are involved in converting chemical and light energy inputs into efficient mechanical work. From a synthetic perspective, the most advanced molecular motors are rotators that are activated by light wherein a molecular subcomponent rotates unidirectionally around an axis. The mechanical work produced by arrays of molecular motors can be used to induce a macroscopic effect. Light activation offers advantages over biological chemically activated molecular motors because one can direct precise spatiotemporal inputs while conducting reactions in the gas phase, in solution and in vacuum, while generating no chemical byproducts or waste. In this review, we describe the origins of the first light-activated rotary motors and their modes of function, the structural modifications that led to newer motor designs with optimized rotary properties at variable activation wavelengths. Presented are molecular motor attachments to surfaces, their insertion into supramolecular structures and photomodulating materials, their use in catalysis, and their action in biological environments to produce exciting new prospects for biomedicine.
RESUMEN
BACKGROUND: Chronic obstructive pulmonary disease (COPD) is one of most common comorbidities in acute respiratory distress syndrome (ARDS). There are few specific studies on the appropriate ventilation strategy for patients with ARDS comorbid with COPD, especially regarding on positive end-expiratory pressure (PEEP) titration. METHODS: To compare the respiratory mechanics in mechanical ventilated ARDS patients with or without COPD and to determine whether titration of PEEP based on electrical impedance tomography (EIT) is superior to the ARDSnet protocol. This is a single center, perspective, repeated measure study. ARDS patients requiring mechanical ventilation who were admitted to the intensive care unit between August 2017 and December 2020 were included. ARDS patients were divided according to whether they had COPD into a COPD group and a non-COPD group. Respiratory mechanics, gas exchange, and hemodynamics during ventilation were compared between the groups according to whether the PEEP level was titrated by EIT or the ARDSnet protocol. RESULTS: A total of twenty-seven ARDS patients including 14 comorbid with and 13 without COPD who met the study eligibility criteria were recruited. The PEEP levels titrated by EIT and the ARDSnet protocol were lower in the COPD group than in the non-COPD group (6.93 ± 1.69 cm H2O vs. 12.15 ± 2.40 cm H2O, P < 0.001 and 10.43 ± 1.20 cm H2O vs. 14.0 ± 3.0 cm H2O, P < 0.001, respectively). In the COPD group, the PEEP level titrated by EIT was lower than that titrated by the ARDSnet protocol (6.93 ± 1.69 cm H2O vs. 10.43 ± 1.20 cm H2O, P < 0.001), as was the global inhomogeneity (GI) index (0.397 ± 0.040 vs. 0.446 ± 0.052, P = 0.001), plateau airway pressure (16.50 ± 4.35 cm H2O vs. 20.93 ± 5.37 cm H2O, P = 0.001), dead space ventilation ratio (48.29 ± 6.78% vs. 55.14 ± 8.85%, P < 0.001), ventilation ratio (1.63 ± 0.33 vs. 1.87 ± 0.33, P < 0.001), and mechanical power (13.92 ± 2.18 J/min vs. 15.87 ± 2.53 J/min, P < 0.001). The cardiac index was higher when PEEP was treated by EIT than when it was titrated by the ARDSnet protocol (3.41 ± 0.50 L/min/m2 vs. 3.02 ± 0.43 L/min/m2, P < 0.001), as was oxygen delivery (466.40 ± 71.08 mL/min/m2 vs. 411.10 ± 69.71 mL/min/m2, P = 0.001). CONCLUSION: Titrated PEEP levels were lower in patients with ARDS with COPD than in ARDS patients without COPD. In ARDS patient comorbid with COPD, application of PEEP titrated by EIT was lower than those titrated by the ARDSnet protocol, which contributed to improvements in the ventilation ratio, mechanical energy, cardiac index, and oxygen delivery with less of an adverse impact on hemodynamics.