RESUMEN
The permittivity of blood glucose is not a strong function of its concentration in microwave or millimeter-wave frequencies. Measuring glucose concentrations remains a challenge, particularly in the presence of interference caused by the ambient leaky waves. In this paper, however, we demonstrate that a near-linear correlation between the glucose concentration and the blood permittivity was noticeably observed at a whispering gallery mode resonance. METHOD: the proposed sensor was a vacuum suction aspirator partially wounded with a turn of the Goubau line. This arrangement enabled a fixed cylindrical volume of a skin tissue bump or glucose/water solution to be formed and used as a whispering gallery resonator for in-vivo and ex-vivo measurements. RESULTS: in the in-vivo study, a near-linear correlation between the glucose levels and the S21 parameters was noticeably observed at the fundamental whispering gallery resonance (i.e., at 2.18 GHz). In the ex-vivo study, a similar correlation was observed between the concentration of a glucose/water solution and the S21 parameters 56.6 GHz. CONCLUSION: the results of both investigations were consistent not only with the invasive measurements using the Accu-checkTM, but also with the conclusion drawn by some other research groups who have successfully measured blood glucose concentrations at millimeter-wave frequencies.
Asunto(s)
Técnicas Biosensibles , Automonitorización de la Glucosa Sanguínea/instrumentación , Glucemia/análisis , Piel/patología , Algoritmos , Automonitorización de la Glucosa Sanguínea/métodos , Radiación Electromagnética , Voluntarios Sanos , Humanos , Microondas , Reconocimiento de Normas Patrones Automatizadas , Fantasmas de Imagen , Reproducibilidad de los Resultados , Agua/análisisRESUMEN
This paper proposes an efficient transmission line modulation by using the bending technique to realize low profile leaky wave antennas in the Ku-band for frequency scanning and sensor applications. The paper focuses mainly on the bending effects of the transmission line in terms of the sharpness of edges. The right-hand/left-hand transmission line can be designed in the form of zig-zag pattern with sharp corners and only the right-hand transmission line in the form of sinusoidal patterns with smooth corners. In this presentation, we demonstrate that transmission lines of this kind can be used to realize highly efficient leaky wave antennas with broadband impedance matching and high gain characteristics in the Ku-band. Dispersion analysis and ladder network analysis have been performed for investigating the performance of the proposed designs. The sharpness of the bends periodically distributed along the body of the antenna has been used to our advantage for frequency scanning in the left-hand and right-hand quadrants at different frequencies. The proposed bending technique has been proven to be instrumental in achieving the desired characteristics of low profile leaky wave antennas.
RESUMEN
This paper presents a highly sensitive closed loop enclosed split ring biosensor operating in microwave frequencies for measuring blood glucose levels in the human body. The proposed microwave glucose biosensor, working on the principle of high field confinement and concentrated energy, has been tested using both in-vitro and in-vivo methods. This principle allows the sensor to concentrate energy at the surface which results in improved accuracy of measurements. For in-vitro measurements, the biosensor has been tested using de-ionized water glucose solutions of different concentrations. The miniaturized micrometer scale biosensor is fabricated over a thin Si-substrate using photolithographic technique. The biosensor has been designed in a way to operate at desired microwave frequencies. Highly confined fields and concentrated energy inside the closed loop line containing the split ring resonators are responsible for the sensitivity enhancement. This new biosensor has obtained a high sensitivity of 82 MHz/mgmL-1 within the clinical diabetic range during in-vivo testing over the human body. In addition, the subjects (undergoing experiments) steady state has been continuously monitored throughout the experiment which helps in improving the accuracy of the results. The proposed biosensor has further obtained a low detection limit of <0.05 wt.% and can be useful for continuous non-invasive blood glucose monitoring.
Asunto(s)
Técnicas Biosensibles/instrumentación , Glucemia/análisis , Microondas , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , Voluntarios Sanos , Humanos , MasculinoRESUMEN
HYPOTHESIS: Transfer of chemical-vapor-deposition (CVD) grown monolayer graphene from one substrate to another requires a transfer agent. The transfer agent usually needs to be removed by washing with organic solvent such as acetone or high temperature annealing, which is harmful to the structure integrity and intrinsic property of a graphene film. Here, we propose the use of camphor as a transfer agent to transfer monolayer graphene onto a target dielectric substrate, which bypasses these demanding steps and only needs the common alcohol solvent rinsing. EXPERIMENTS: To facilitate a crack-free graphene transfer, the proposed approach allows the camphor supported polycrystalline graphene to be rationally fastened with a thickened and solidified edge bead (i.e. camphor oil-filled boundary). A layer of camphor was first deposited onto a graphene/copper surface. The backside copper substrate was then etched away, whilst the camphor/graphene bilayer was placed onto a SiO2/Si substrate. Finally, the camphor remaining on the camphor/graphene/SiO2/Si sublimed into a vapor. The graphene/SiO2 stack was then examined by microscopic, spectral and electrical characterization. FINDINGS: The results of our examination suggest that the proposed method can guarantee a clean and damage-free graphene transfer. This method is particularly attractive in the application area for nano/micro-electronics, where it provides CVD-grown graphene the ability to be used on wide varieties of substrates that are sensitive to organic solvents and high temperature.