Neck Strength in Coronal and Sagittal Head Movement in Military Pilots and Aircrew With Chronic Neck Pain: A Systematic Review With Meta-Analysis.

OBJECTIVE: This systematic review aimed to assess whether there is a difference in neck strength between military pilots and aircrew with and without chronic neck pain. METHODS: The PubMed, Embase, and Scopus databases were searched. Two independent reviewers selected relevant full articles comparing neck strength between military pilots and aircrew with and without chronic neck pain. Two independent reviewers extracted the data from the full articles selected. A meta-analysis was used to assess standardized mean differences in neck strength based on a random-effects model. RESULTS: The search returned 3554 results; 5 articles were included in the study. Military pilots and aircrew with chronic neck pain showed no difference in neck strength from military pilots and aircrew without chronic neck pain for flexion and extension, but did show a neck strength reduction for right and left lateral flexion -0.29 (95% confidence interval, -0.52 to -0.06; I² = 3%) and -0.23 (95% confidence interval, -0.45 to 0.00; I² = 0%), respectively. CONCLUSION: Based on this meta-analysis with a 3a level of evidence, military pilots and aircrew with chronic neck pain have reduced neck strength for coronal head movement, but not sagittal movement compared with military pilots and aircrew without chronic neck pain.

Validation of the Measurement of the Angle of Trunk Rotation in Photogrammetry.

OBJECTIVE: The purpose of this study was to validate the photogrammetric measurement of the angle of trunk rotation in relation to the scoliometer instrument. METHODS: Fifty-eight prominences from individuals with ages between 7 and 18 and with suspicion of spinal asymmetry (SA) were evaluated through the scoliometer and photogrammetry. The photographs were analyzed in the Digital Image-based Postural Assessment software. For statistical purposes, we used Pearson's correlation test (r), root mean square error, Bland-Altman graphical analysis, and receiver operating characteristic curve. The level of significance was P ≤ .05. RESULTS: Excellent correlation for the angle of trunk rotation was obtained between the scoliometer and photogrammetry, with a root mean square error of 3°. The Bland-Altman graphical analysis showed equally dispersed data with no participants outside the limits of agreement. The receiver operating characteristic curve evidenced that (1) the cutoff point for the identification of the presence of spinal asymmetry is 4°; (2) mild to moderate SA is between 4° and 7°; (3) moderate to severe SA is above 8°; and (4) sensitivity and specificity were above 83% and 78%, respectively, with an area under the curve ≥ 90%. CONCLUSION: Photogrammetry is validated for measuring the angle of trunk rotation, being an accurate and accessible tool for the evaluation of patients with spinal asymmetries.

Concurrent Validity of Digital Image-based Postural Assessment as a Method for Measuring Thoracic Kyphosis: A Cross-Sectional Study of Healthy Adults.

OBJECTIVE: To analyze the concurrent validity of the Digital Image-based Postural Assessment (DIPA) method for identifying the magnitude and classification of thoracic kyphosis in adults. METHODOLOGY: On the same day and in the same place, thoracic kyphosis was assessed in 68 adults using 2 methods: the DIPA software protocol and radiography. The DIPA software provided angular values of thoracic kyphosis based on trigonometric relations, while with the radiograph, the curvature was calculated using the Cobb method. The following tests were applied in the statistical analysis: Pearson's correlation, Bland-Altman's graphic representation, root mean square error, and receiver operating characteristic (ROC) curve; α = 0.05. The reference angular values for the standard thoracic posture used in DIPA were determined with the ROC curve based on the Cobb angles. RESULTS: The correlation between the angles obtained for thoracic kyphosis using the DIPA and Cobb methods was found to be high (r = 0.813, P < .001), and the accuracy was ±4°. According to Bland-Altman's representation, the magnitudes provided by the DIPA software were in agreement with those of the Cobb method. In reference values for determining the standard posture of the thoracic spine, the ROC curve indicated good accuracy in diagnosing a decrease in thoracic kyphosis (with a value of 33.9°) and excellent accuracy in diagnosing thoracic hyperkyphosis (with a value 39.9°) when using DIPA. CONCLUSION: The DIPA postural assessment method is valid in the sagittal plane for identifying the magnitude of thoracic kyphosis in adults. Furthermore, it is accurate in diagnosing alterations in thoracic kyphosis.

Duration and sequence of muscular activation in dentate individuals and complete denture wearers during simulation of activities of daily living.

Occlusal support may influence muscular function during complex motor tasks. This study evaluated the duration and sequence of muscular activation of masticatory (temporal, masseter), postural head/neck (sternocleidomastoid, trapezius), postural trunk (rectus abdominis, paravertebrals), and low extremity strength (rectus femoris, gastrocnemius) muscles during simulation of activities of daily living (ADL) in edentulous women wearing complete dentures (n = 10) and in dentate women (n = 10). Electromyographic activity was recorded during tests of stand-up/sit down in the Chair, sit up/lie down in the Bed and lift/lower Bags. Occlusal support (dentures) had a significant effect on duration of muscular activation in the Chair Test: the masseter muscle activated longer with dentures during the standing movement. The masseter and sternocleidomastoid muscles showed significant alteration in their order of activation in non-denture-wearing women. For the Bed Test, dentures had significant effect for the gastrocnemius during the sitting-up phase and for the rectus abdominis during the lying-down movement. For the Bag Test, head/neck muscles were activated in a different order as a function of occlusal support. Anticipation of activation of the paravertebral muscles, rectus abdominis, and gastrocnemius was observed in dentate women compared with denture wearers. These findings suggest that occlusal support influences electromyographic activity of some muscles during simulation of ADL.

Individuals With Chronic Neck Pain Have Lower Neck Strength Than Healthy Controls: A Systematic Review With Meta-Analysis.

OBJECTIVE: The aim is to verify whether there is difference in neck strength between healthy individuals and individuals with chronic neck pain. METHODS: The PubMed, Embase, and Scopus databases were searched. Two independent reviewers selected relevant full articles comparing neck strength between healthy individuals and individuals with chronic neck pain. Two independent reviewers extracted the data from the full articles selected. A meta-analysis was used to assess standardized mean differences in neck strength based on a random-effects model (Prospero number CRD42017081502). RESULTS: The search returned 3554 results; 15 articles were included. The chronic neck pain group showed lower neck strength compared with healthy individuals. The standardized mean difference was -0.90 (95% confidence interval [CI] = -1.13 to -0.67) for flexion, -0.79 (95% CI = -0.99 to -0.60) for extension, -0.74 (95% CI = -1.03 to -0.45) for right lateral flexion, and -0.75 (95% CI = -1.04 to -0.46) for left lateral flexion. CONCLUSION: Based on this meta-analysis with a 3a level of evidence, individuals with chronic neck pain have lower neck strength for flexion, extension, and the lateral flexion of the neck than healthy controls.

Accuracy of a Radiological Evaluation Method for Thoracic and Lumbar Spinal Curvatures Using Spinous Processes.

OBJECTIVE: The purpose of this study was to assess a radiographic method for spinal curvature evaluation in children, based on spinous processes, and identify its normality limits. METHODS: The sample consisted of 90 radiographic examinations of the spines of children in the sagittal plane. Thoracic and lumbar curvatures were evaluated using angular (apex angle [AA]) and linear (sagittal arrow [SA]) measurements based on the spinous processes. The same curvatures were also evaluated using the Cobb angle (CA) method, which is considered the gold standard. For concurrent validity (AA vs CA), Pearson's product-moment correlation coefficient, root-mean-square error, Pitman- Morgan test, and Bland-Altman analysis were used. For reproducibility (AA, SA, and CA), the intraclass correlation coefficient, standard error of measurement, and minimal detectable change measurements were used. RESULTS: A significant correlation was found between CA and AA measurements, as was a low root-mean-square error. The mean difference between the measurements was 0° for thoracic and lumbar curvatures, and the mean standard deviations of the differences were ±5.9° and 6.9°, respectively. The intraclass correlation coefficients of AA and SA were similar to or higher than the gold standard (CA). The standard error of measurement and minimal detectable change of the AA were always lower than the CA. CONCLUSION: This study determined the concurrent validity, as well as intra- and interrater reproducibility, of the radiographic measurements of kyphosis and lordosis in children.

The Validity and Reproducibility of the Flexicurve in the Evaluation of Cervical Spine Lordosis.

OBJECTIVE: The purpose of this study was to measure the validity and reliability of flexicurve measurements of cervical curvature in the sagittal plane in adults. METHODS: One hundred thirteen adults were assessed in the seated position with flexicurve radiographs. Two groups were measured: (1) the validity group (n = 55), and (2) the reliability group (n = 58). Both groups were subdivided into 3 subgroups according to body mass index: underweight, normal weight, and overweight. Radiographs were simultaneously taken with flexicurve molded on the cervical spine. Pearson's correlation and the root mean square error were used for the concurrent validity. The reliability of the flexicurve was assessed by 3 raters using the intraclass correlation coefficient (ICC), the standard error of the measurement (SEM), and minimal detectable change (MDC). RESULTS: For the concurrent validity, a high correlation (r = 0.570, P < .001, root mean square error = 9.8°), and excellent results were obtained for intra-rater (ICC = 0.771, P < .001, SEM = 4.4°, MDC = 8.6°) and inter-rater (ICC = 0.775, P < .001, SEM = 4.3°, MDC = 8.5°) reliability. The subgroups had different results, whereas the underweight subgroup consistently had the best results. CONCLUSION: These findings suggest that the flexicurve can be a valid instrument for evaluating the curvature of the cervical spine in the sagittal plane in adults classified according to the body mass index as underweight and normal weight. Reliable measurements were provided for its use whether by the same or different raters. The flexicurve can be recommended for use both in clinical practice and in research settings as long as the suggested protocol is followed.

Development and Validation of Prediction Equations for Spinal Curve Angles Based on Skin Surface Measurements.

OBJECTIVE: The purpose of this study was to develop, assess the reliability of, and validate prediction equations that estimate the sagittal curves of the spine from the skin surface. METHODS: Forty digital panoramic radiographs were used to develop the prediction equation, and 59 radiographs were used to assess reliability and validate the equations. For evaluation of the thoracic and lumbar curves, anatomical reference points were marked on the vertebral body, spinous process, and skin surface at the C6, C7, T2, T4, T6, T8, T10, T12, L2, L4, and S2 vertebrae. Three third-degree polynomials were obtained, estimated with the least squares method: inner curves from the centroid of the vertebral bodies and from the apex of the spinous processes and external curve from the skin surface. The magnitude of the curves of each region was estimated based on the angle between tangent lines at several vertebral levels. Prediction equations were obtained (simple linear regression) for the vertebral levels that had the best correlation between the inner and surface curves. The validation of the prediction equations was confirmed using Pearson's correlation (r), Student t test, and root mean square error. The reliability of the method was confirmed using the intraclass correlation coefficient, standard error of measurement, and minimal detectable change (α = 0.05). RESULTS: The best correlations were obtained between the T4-T12 (thoracic) and T10-S2 (lumbar) levels (r > 0.85). For the intrarater and interrater reliability, the correlation was higher than 0.965 and higher than 0.896, respectively. There was a significant and strong correlation between estimated and actual values for the thoracic and lumbar curves, which was confirmed by the t-test results and by the root mean square error inferior to 1°. CONCLUSION: Prediction equations can precisely and accurately estimate the angles of the internal sagittal curves of the spine from the skin surface.

Shoulder kinematics is not influenced by external load during elevation in the scapular plane.

The current study aimed to compare the shoulder kinematics (3D scapular orientation, scapular angular displacement and scapulohumeral rhythm) of asymptomatic participants under unloaded and loaded conditions during unilateral shoulder elevation in the scapular plane. We used a repeated-measures design with a convenience sample. Eleven male participants with an age range of 21-28 years with no recent history of shoulder injury participated in the study. The participants performed isometric shoulder elevation from a neutral position to approximately 150 degrees of elevation in the scapular plane in intervals of approximately 30 degrees during unloaded and loaded conditions. Shoulder kinematic data were obtained with videogrammetry. During shoulder elevation, the scapula rotated upwardly and externally, and tilted posteriorly. The addition of an external load did not affect 3D scapular orientation, scapular angular displacement, or scapulohumeral rhythm throughout shoulder elevation (P > .05). In clinical practice, clinicians should expect to observe upward and external rotation and posterior tilt of the scapula during their assessments of shoulder elevation. Such behavior was not influenced by an external load normalized to 5% of body weight when performed in an asymptomatic population.

Influence of center of pressure estimation errors on 3D inverse dynamics solutions during gait at different velocities.

The aim of this study was to investigate the effect of errors in the location of the center of pressure (5 and 10 mm) on lower limb joint moment uncertainties at different gait velocities (1.0, 1.5, and 2.0 m/s). Our hypotheses were that the absolute joint moment uncertainties would be gradually reduced from distal to proximal joints and from higher to lower velocities. Joint moments of five healthy young adults were calculated by inverse dynamics using the bottom-up approach, depending on which estimate the uncertainty propagated. Results indicated that there is a linear relationship between errors in center of pressure and joint moment uncertainties. The absolute moment peak uncertainties expressed on the anatomic reference frames decreased from distal to proximal joints, confirming our first hypothesis, except for the abduction moments. There was an increase in moment uncertainty (up to 0.04 N m/kg for the 10 mm error in the center of pressure) from the lower to higher gait velocity, confirming our second hypothesis, although, once again, not for hip or knee abduction. Finally, depending on the plane of movement and the joint, relative uncertainties experienced variation (between 5 and 31%), and the knee joint moments were the most affected.

Construct validity and reliability of tests for sacroiliac dysfunction: standing flexion test (STFT) and sitting flexion test (SIFT).

CONTEXT: Sacroiliac dysfunction is characterized by a hypomobility of the range of motion of the joint, followed by a positional change regarding the relationship between the sacrum and the iliac. In general, the clinical tests that evaluate the sacroiliac joint (SIJ) and its dysfunctions lack validity and reliability values. OBJECTIVES: This article aims to evaluate the construct validity and intra- and inter-rater reliability of the standing flexion test (STFT) and sitting flexion test (SIFT). METHODS: In this prospective study, the sample consisted of 30 individuals of both sexes, and the evaluation team was composed of five researchers. The evaluations took place on two different days: first day, inter-rater reliability and construct validity; and second day, intra-rater reliability. The reference standard for the construct validity was 3-dimensional measurements obtained utilizing the BTS SMART-DX system. For statistical analysis, the percentage (%) agreement and the kappa statistic (K) were utilized. RESULTS: The construct validity was determined for STFT (70% agreement; K=0.49; p<0.01) and SIFT (56.7% agreement; K=0.29; p<0.05). The intra-rater reliability was determined for STFT (66.3% agreement; K=0.43; p<0.01) and SIFT (56.7% agreement; K=0.38; p<0.01). The inter-rater reliability was determined for STFT (10% agreement; K=-0.02; p=0.825) and SIFT (13.3% agreement; K=0.01; p=0.836). CONCLUSIONS: The STFT confirmed the construct validity and was reliable when applied by the same rater to healthy people, even if the rater had no experience. It was not possible to achieve minimum scores using the SIFT either for construct validity or reliability. We suggest that further studies be conducted to investigate the measurement properties of palpatory clinical tests for SIJ mobility, especially in symptomatic patients.

Validation of a Mathematical Procedure for the Cobb Angle Assessment Based on Photogrammetry.

OBJECTIVE: This prospective study aimed to assess the concurrent validity and diagnostic accuracy of a mathematical procedure for measurement of the spinal inclination angle, analogous to the Cobb angle, by means of photogrammetry. METHODS: Sixty-one subjects (aged 7 to 18 years), male and female, underwent radiographic (Cobb angle) and photogrammetric (DIPA [Digital Image-based Postural Assessment] angle) evaluations. The measurement of spinal inclination angle obtained through photogrammetry followed the Digital Image-Based Postural Assessment software protocol. Concurrent validity was appraised using Spearman rank correlation, the coefficient of determination, the root-mean-square error, Bland-Altman plot analysis, and receiver operating characteristic analysis, adopting P ≤ .05. RESULTS: The analyses were divided according to the topography of the scoliotic curve (thoracic, lumbar, or thoracolumbar). The correlations were excellent (from 0.72 to 0.81) and significant for all the regions of the spine, and the coefficients of determination ranged between 0.75 and 0.88. The root-mean-square error was between 5° and 11°, and the mean difference was very close to 0. The area under the curve was excellent and significant, ranging between 95% and 99%. CONCLUSION: The mathematical procedure presented is valid to evaluate the spinal inclination angle in photogrammetry, analogous to the Cobb angle in radiography.

Effect of combined actions of hip adduction/abduction on the force generation and maintenance of pelvic floor muscles in healthy women.

Pelvic floor muscle (PFM) force and coordination are related to urinary incontinence severity and to sexual satisfaction. Health professionals frequently combine classic PFM exercises with hip adduction/abduction contraction to treat these disorders, but the real benefits of this practice are still unknown. Based on a theoretical anatomy approach whereby the levator ani muscle is inserted into the obturator internus myofascia and in which force generated by hip movements should increase the contraction quality of PFMs, our aim was to investigate the effects of isometric hip adduction and abduction on PFM force generation. Twenty healthy, nulliparous women were evaluated using two strain-gauge dynamometers (one cylinder-like inside the vaginal cavity, and the other measuring hip adduction/abduction forces around both thighs) while performing three different tasks: (a) isolated PFM contraction; (b) PFM contraction combined with hip adduction (30% and 50% maximum hip force); and (c) PFM contraction combined with hip abduction (30% and 50% maximum hip force). Data were sampled at 100Hz and subtracted from the offset if existent. We calculated a gradient between the isolated PFM contraction and each hip condition (Δ Adduction and Δ Abduction) for all variables: Maximum force (N), instant of maximum-force occurrence (s), mean force in an 8-second window (N), and PFM force loss (N.s). We compared both conditions gradients in 30% and 50% by paired t-tests. All variables did not differ between hip conditions both in 30% and 50% of maximum hip force (p>.05). PFM contraction combined with isometric hip abduction did not increase vaginal force in healthy and nulliparous women compared to PFM contraction combined with isometric hip adduction. Therefore, so far, the use of hip adduction or abduction in PFM training and treatments are not justified for improving PFM strength and endurance.

Test-retest, inter- and intra-rater reliability of the flexicurve for evaluation of the spine in children.

INTRODUCTION: The early evaluation of the spine in children is desirable because it is at this stage of development that the greatest changes in the body structures occur. OBJECTIVE: To determine the test-retest, intra- and inter-rater reliability of the Flexicurve instrument for the evaluation of spinal curvatures in children. METHOD: Forty children ranging from 5 to 15 years of age were evaluated by two independent evaluators using the Flexicurve to model the spine. The agreement was evaluated using Intraclass Correlation Coefficients (ICC), Standard Error of the Measurement (SEM), and Minimal Detectable Change (MDC). RESULTS: In relation to thoracic kyphosis, the Flexicurve was shown to have excellent correlation in terms of test-retest reliability (ICC2,2=0.87) and moderate correlation in terms of intra-(ICC2,2=0.68) and inter-rater reliability (ICC2,2=0.72). In relation to lumbar lordosis, it was shown to have moderate correlation in terms of test-retest reliability (ICC2,2=0.66) and intra- (ICC2,2=0.50) and inter-rater reliability (ICC=0.56). CONCLUSION: This evaluation of the reliability of the Flexicurve allows its use in school screening. However, to monitor spinal curvatures in the sagittal plane in children, complementary clinical measures are necessary. Further studies are required to investigate the concurrent validity of the instrument in order to identify its diagnostic capacity.

Can the adapted arcometer be used to assess the vertebral column in children?

BACKGROUND: The adapted arcometer has been validated for use in adults. However, its suitability for use in children can be questioned given the structural differences present in these populations. OBJECTIVE: To verify the concurrent validity, repeatability, and intra- and inter-reproducibility of the adapted arcometer for the measurement of the angles of thoracic kyphosis and lumbar lordosis in children. METHOD: Forty children were evaluated using both sagittal radiography of the spine and the adapted arcometer. The evaluations using the arcometer were carried out by two trained evaluators on two different days. In the statistical treatment, the intraclass correlation coefficient (ICC), Pearson's product moment correlation, Spearman's rho, the paired t test, and Wilcoxon's test were used (α=.05). RESULTS: A moderate and significant correlation was found between the x-ray and the adapted arcometer regarding thoracic kyphosis, but no correlation was found regarding lumbar lordosis. Repeatability and intra-evaluator reproducibility of the thoracic kyphosis and lumbar lordosis were confirmed, which was not the case of inter-evaluator reproducibility. CONCLUSION: The adapted arcometer can be used to accompany postural alterations in children made by the same evaluator, while its use for diagnostic purposes and continued evaluation by different evaluators cannot be recommended. Further studies with the aim of adapting this instrument for use in children are recommended.

Comparison of shoulder resultant net moment between three different exercises and load conditions.

Different exercises are prescribed by physiotherapists and despite the popular use of elastic resistance, few studies have investigated the effect of such rehabilitation tools on shoulder resultant net moment (RNM). The aim of the present study was to compare shoulder RNM peak values and the respective angle of occurrence during three shoulder rehabilitation exercises: 1) elevation in the scapular plane; 2) flexion; and 3) abduction when performed in three different load situations: 1) without external load; 2) with dumbbells (DB); and 3) with elastic resistance. Twenty-one healthy subjects participated in the study. Kinematic data were obtained by means of an inverse dynamic model. A two-way ANOVA was used for data analysis (α < 0.05). The highest RNM peak for abductor and external rotator muscles was during shoulder abduction exercise and for flexor muscles was during flexion and elevation in the scapular plane. The DB load condition was associated with highest RNM peak values for all muscle groups. This study presents differences among three exercises and load situations for RNM peak values and angle of occurrence. Furthermore, it also presents theoretical rationale for load progress and selection of exercises for shoulder rehabilitation management. Clinicians should consider it, when prescribing strengthening exercises for shoulder rehabilitation.

Assessment of resistance torque and resultant muscular force during Pilates hip extension exercise and its implications to prescription and progression.

BACKGROUND: The understanding of the external mechanics of Pilates exercises and the biomechanics of the joints may guide the prescription of rehabilitation exercises. OBJECTIVES: To evaluate the resistance torque (Γ(R)) during hip extension (HE) exercises performed on the Pilates Cadillac. To perform a biomechanic analysis of the Γ(R) and the weighted mean moment arm (WMMA) in order to calculate the resultant muscle force (FM(R)) of the hip extensors and flexors. To present a mechanical criteria for progression of HE exercise on the Pilates Cadillac. METHODS: Fourteen participants performed HE exercises on the Cadillac in four randomly assigned situations - using two springs (blue and red), which were attached in two positions (high and low). Angular positions were measured using an electrogoniometer. In order to calculate Γ(R), the muscle torque (Γ(M)) and FM(R), free-body diagrams and movement equations were used. The WMMA of the hip extensors and flexors were estimated from the literature. RESULTS: The Γ(R) and FM(R) presented a similar behavior during all situations; however, the maximum Γ(R) values did not occur at the same joint position as the FM(R) maximum values. The WMMA of the hip flexors presented an increased- decreased behavior with greatest values around 55º of flexion, while the hip extensors presented a similar behavior with greatest values around 25º of flexion. CONCLUSION: Biomechanic analysis of HE exercises and the evaluation of mechanical features in relation to the hip joint may be used as an objective criteria for the prescription and progression of HE exercise in Pilates.

Validation, repeatability and reproducibility of a noninvasive instrument for measuring thoracic and lumbar curvature of the spine in the sagittal plane.

BACKGROUND: The need for early identification of postural abnormalities without exposing patients to constant radiation has stimulated the development of instruments aiming to measure the spinal curvatures. OBJECTIVE: To verify the validity, repeatability and reproducibility of angular measures of sagittal curvatures of the spine obtained using an adapted arcometer, by comparing them with Cobb angles of the respective curvatures obtained by using X-rays. METHODS: 52 participants were submitted to two procedures designed to evaluate the thoracic and lumbar curvatures: (1) X-ray examination from which the Cobb angles (CA) of both curvatures were obtained, and (2) measuring the angles with the arcometer (AA). Two evaluators collected the data using the arcometer, with the rods placed at T1, T12, L1 and L5 spinous processes levels in a way as to permit linear measurements which, with aid of trigonometry, supplied the AA. RESULTS: There was a very strong and significant correlation between AA and CA (r=0.94; p<0.01), with no-significant difference (p=0.32), for the thoracic curvature. There was a strong and significant correlation for the lumbar curvature (r=0.71; p<0.01) between AA and CA, with no-significant difference (p=0.30). There is a very strong correlation between intra-evaluator and inter-evaluator AA. CONCLUSION: It was possible to quantify reliably the thoracic and lumbar curvatures with the arcometer and it can thus be considered valid and reliable and for use in evaluating spinal curvatures in the sagittal plane.

Test-retest, inter- and intra-rater reliability of the flexicurve for evaluation of the spine in children

Introduction: The early evaluation of the spine in children is desirable because it is at this stage of development that the greatest changes in the body structures occur. Objective: To determine the test-retest, intra- and inter-rater reliability of the Flexicurve instrument for the evaluation of spinal curvatures in children. Method: Forty children ranging from 5 to 15 years of age were evaluated by two independent evaluators using the Flexicurve to model the spine. The agreement was evaluated using Intraclass Correlation Coefficients (ICC), Standard Error of the Measurement (SEM), and Minimal Detectable Change (MDC). Results: In relation to thoracic kyphosis, the Flexicurve was shown to have excellent correlation in terms of test-retest reliability (ICC2,2=0.87) and moderate correlation in terms of intra-(ICC2,2=0.68) and inter-rater reliability (ICC2,2=0.72). In relation to lumbar lordosis, it was shown to have moderate correlation in terms of test-retest reliability (ICC2,2=0.66) and intra- (ICC2,2=0.50) and inter-rater reliability (ICC=0.56). Conclusion: This evaluation of the reliability of the Flexicurve allows its use in school screening. However, to monitor spinal curvatures in the sagittal plane in children, complementary clinical measures are necessary. Further studies are required to investigate the concurrent validity of the instrument in order to identify its diagnostic capacity.

Electrical activity of external oblique and multifidus muscles during the hip flexion-extension exercise performed in the Cadillac with different adjustments of springs and individual positions.

BACKGROUND: Despite of the widepread use of Pilates in Physical Therapy, there are few studies that have assessed the muscle electrical activation during Pilates exercises. OBJECTIVE: Verify the influence of different spring adjustments and individual positions on the electrical activation of multifidus (MU) and oblique external (OE) muscles during hip flexion-extension (HFE) exercise on the Cadillac. METHODS: Eight women practicing Pilates exercises for at least six months performed 10 repetitions of HFE in the following situations: Lower Spring, spring fixed at 30 cm in relation to level which the individuals were positioned. Higher Spring, spring fixed at 90 cm in relation to level which the individuals were positioned. Near Position, distance of 10 cm from the fixed spring. Distant Position, distance of 30 cm from the fixed spring. Kinematic and eletromyographic data (EMG) were collected simultaneously and the MU and OE muscles were monitored. Each movement of HFE was splitted in two phases (extension and flexion). The EMG signal was calculated and normalized using the maximal voluntary contraction (MVC). The Wilcoxon test was used to investigate differences between the situations (p < 0.05). RESULTS: MU muscle presented muscle activation values ranging from 10 to 20 % MVC, and the highest muscle activation in the lower spring and in the near position. OE muscles presented muscle activation values ranging from 20 to 45% MVC, and the highest values in the higher spring and in the distant position. CONCLUSION: MU and OE muscles presented a distinct electrical activation during different available spring adjustments and individual positions.