RESUMEN
Low use efficiency of nitrogen (N) and phosphorus (P) is major challenge of modern agriculture. Coating of conventional fertilizers with nanomaterials is a promising technique for improved nutrient use efficiency. In current study, nanoparticles (NPs) of potassium ferrite (KFeO2 NPs) were coated on di-ammonium phosphate (DAP) fertilizer with three rates (2, 5, 10%) of KFeO2 NPs and were evaluated for release of N, P, K and Fe supplementation in clay loam and loam soil up to 60 days. The NPs were characterized for crystal assemblage, bond formation, morphology and configuration using the x-ray diffraction (XRD), scanning electron microscope (SEM) and Fourier transform-infra red spectroscopy (FT-IR). The results showed that size of NPs ranged between 7 and 18 nm. The controlled release of P in 10% KFeO2 nano-coated DAP was observed throughout the incubation period. The P release kept on increasing from day-1 (14.5 µg g-1) to day-60 (178.6 µg g-1) in coated DAP (10%) in loam soil. The maximum release of 50.4 µg g-1 NH4+1-N in coated DAP (10%) was observed after 30 days of incubation. The release of NO3-1-N was consistent up to 45 and 60 days in clay loam and loam soil, respectively. The average release of potassium and iron in 60 days was 19.7 µg g-1 and 7.3 µg g-1 higher in 10% coated DAP than traditional DAP in clay loam soil. It was concluded that KFeO2 nano-coated DAP supplied P and mineral N for longer period of time in both soils, and some higher coating levels should be tested in future.
Asunto(s)
Fertilizantes/análisis , Nanopartículas/química , Fosfatos/química , Potasio , Agricultura , Arcilla , Compuestos Férricos , Nitrógeno , Nutrientes , Fósforo/química , Suelo/química , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
Major causes of water pollution in the ecosystem are pollutants such as dyes which are noxious. The present study was based on the synthesis of the green nano-biochar composites from cornstalk and green metal oxide resulting in Copper oxide/biochar, Zinc oxide /biochar, Magnesium oxide/biochar, Manganese oxide/biochar, biochar for removal of dyes combined with the constructed wetland (CW). Biochar Augmentation in constructed wetland systems has improved dye removal efficiency to 95% in order of copper oxide/biochar > Magnesium oxide/biochar > Zinc oxide/biochar > Manganese oxide/biochar > biochar > control (without biochar) respectively in wetlands. It has increased the efficiency of pH by maintaining pH 6.9-7.4, while Total Suspended Solids (TSS) removal efficiency and Dissolved oxygen (DO) increased with the hydraulic retention time of about 7 days for 10 weeks. Chemical oxygen demand (COD) and colour removal efficiency increased with the hydraulic retention time of 12 days for 2 months and there was a low removal efficiency for total dissolved solids (TDS) from control (10.11%) to Copper oxide /biochar (64.44%) and Electrical conductivity (EC) from control (8%) to Copper oxide /biochar (68%) with the hydraulic retention time of about 7 days for 10 weeks. Colour and chemical oxygen demand removal kinetics followed second and first-order kinetic. A significant growth in the plants were also observed. These results proposed the use of agricultural waste-based biochar as part of a constructed wetland substratum can provide enhanced removal of textile dyes. That can be reused.
Asunto(s)
Humedales , Óxido de Zinc , Cobre , Ecosistema , Colorantes , Óxido de Magnesio , Cinética , Óxidos , Eliminación de Residuos Líquidos/métodos , NitrógenoRESUMEN
Nitrogenous fertilizers have low efficiency in alkaline calcareous soils due to volatilization and denitrification. These losses cause economic environmental constraints. Coating of urea with nanoparticles (NPs) is an innovative strategy to improve crop yields by sustaining N availability. In the current study, zinc oxide nanoparticles (ZnO NPs) were synthesized by precipitation method and characterized for morphology and configuration, bond formation, and crystal assemblage using the X-ray diffraction and scanning electron microscope (SEM). The SEM results confirmed the size of ZnO NPs in the size range of 25 nm with cuboid shape. Urea fertilizer, coated with ZnO NPs, was applied to wheat crop in a pot trial. Two rates of ZnO NPs at 2.8 and 5.7 mg kg-1 were selected to coat the commercial urea. A batch experiment was conducted to ensure the ammonium (NH4+) and nitrate (NO3-) ions release by amending the soil with ZnO NPs coated urea and comparing with non-amended soil. The gradual release of NH4+ was observed for 21 days from the ZnO NP-coated urea. In the second part of trial, seven different treatments of coated and uncoated urea were tested on wheat crop. Urea coated with ZnO nanoparticles at 5.7 mg kg-1 improved all growth attributes and yields. The ZnO NP coated urea increased the N content shoot (1.90 g 100g-1 DW) and potentially biofortified Zn content (47.86 mg kg-1) in wheat grain. The results are indicative of viability of a novel coating for commercial urea that will not only reduce N losses but also supplement Zn without additional cost of labor.
Asunto(s)
Nanopartículas , Óxido de Zinc , Óxido de Zinc/química , Zinc/análisis , Triticum , Suelo/química , Disponibilidad Biológica , Urea , Nitrógeno , Nanopartículas/químicaRESUMEN
Zinc (Zn) is essential for plants and animals as it plays significant roles in several physiological and biological processes. Its deficiency in soil results in low Zn content food and is one of the major reasons for Zn malnutrition in humans. Biofortification of crops with zinc (Zn) is a viable approach to combat malnutrition, especially in developing countries. A hydroponic study was executed to study response and Zn partitioning in various lentil genotypes. Eight preselected lentil genotypes (Line-11504, Mansehra-89, Masoor-2006, Masoor-85, Line-10502, Markaz-09, Masoor-2004, and Shiraz-96) were grown in solution culture with two Zn levels (control and adequate Zn). Plants were sown in polythene lined iron trays with a two inch layer of prewashed riverbed sand. After 10 days of germination, seedlings were transplanted to a 25L capacity container with nutrient solution for 15 days, and afterward, these plants were divided into two groups, receiving either 2.0 mM Zn or no Zn levels. Three plants of each genotype were harvested at the vegetative growth stage (60 DAT) and the remaining three at physiological maturity (117 DAT). Plants were partitioned into roots, shoots, and grains at harvest. Significant variations in root and shoot dry matter production, grain output, partitioning of Zn in plant parts (root, shoot, and grain), grain phytate reduction, and Zn bioavailability were observed among genotypes. Lentil root accumulated more Zn (54 mg kg-1) with respect to shoot Zn (51 mg kg-1) under Zn supply. The Zn efficient genotypes (Line-11504 and Mansehra-89) produced more root and shoot dry weights at both harvests. There was a positive correlation between the relative growth rate of root and grain phytate concentration (r = 0.55) and [phytate]:[Zn] ratio (r = 0.67). Zn-efficient genotype Mansehra-89 had a maximum root shoot ratio (0.57) and higher grain Zn (60 mg kg-1) with a respectively reduced grain phytate (17 µg g-1) and thus, had more Zn bioavailability (3.01 mg d-1). The genotypic ability for Zn uptake and accumulation within different plant tissues may be incorporated into future crop breeding to improve the nutrition of undernourished consumers.
RESUMEN
One of the major environmental problems is the fast accumulation of brick kiln emissions near the peripheries of almost all urban centers. An enormous quantity of substandard coal, wood, rubber tires, or saw wood is used as fuel in these brick kilns, creating environmental pollution through carbon and heavy metals present in the emissions. The present study was designed to determine the distribution pattern of heavy metals in a soil-water-plant system under the influence of brick kiln emissions. Ash, soil (0-15 cm), water, and plant samples were collected from the adjacent areas of the brick kilns. Geo-accumulation index and contamination factors were used to assess the toxicity of metals to soil and plants. It was found that the concentrations of Cd in water, soil, coal, and plant samples were found in the range of 0.004-0.024 mg L-1, 0.02-0.66, 0.002-0.042, and 0.06 to 0.07 mg kg-1, respectively, while Pb concentration was found within the range of 0-0.08 mg L-1, 0.30-8.60, 0.011-0, and 0.01-0.08 mg kg-1 in water, soil, and plant samples, respectively. The concentration of Cd in brick kilns ash was in the range of 0-0.04 mg kg-1 while Pb was found within the range of 0.01-0.05 mg kg-1 for ash. Geo-accumulation index and contamination factor values for Cd were found higher suggesting proper pollution prevention measures to be implemented. Based on the results, it was concluded that Cd concentrations in soil, plants, and water samples were higher in the subject area due to brick kiln emissions and higher Cd concentrations in the fuel material.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Cadmio , Carbón Mineral , Monitoreo del Ambiente , Plomo , Metales Pesados/análisis , Pakistán , Plantas , Suelo , AguaRESUMEN
Nitrogen (N) is an essential element for plant growth and development. The application of a balanced and optimal amount of N is required for sustainable plant yield. For this, different N sources and forms are used, that including ammonium (NH4+) and nitrate (NO3-). These are the main sources for N uptake by plants where NH4+/NO3- ratios have a significant effect on the biomass, quality and metabolites composition of lettuce grown in soil, substrate and hydroponic cultivation systems. A limited supply of N resulted in the reduction in the biomass, quality and overall yield of lettuce. Additionally, different types of metabolites were produced with varying concentrations of N sources and can be used as metabolic markers to improve the N use efficiency. To investigate the differential metabolic activity, we planted lettuce with different NH4+/NO3- ratios (100:0, 75:25, 50:50, 25:75 and 0:100%) and a control (no additional N applied) in soil, substrate and hydroponic cultivation systems. The results revealed that the 25% NH4+/75% NO3- ratio increased the relative chlorophyll contents as well as the biomass of lettuce in all cultivation systems. However, lettuce grown in the hydroponic cultivation system showed the best results. The concentration of essential amino acids including alanine, valine, leucine, lysine, proline and serine increased in soil and hydroponically grown lettuce treated with the 25% NH4+/75% NO3- ratio. The taste and quality-related compounds in lettuce showed maximum relative abundance with the 25% NH4+/75% NO3- ratio, except ascorbate (grown in soil) and lactupicrin (grown in substrate), which showed maximum relative abundance in the 50% NH4+/50% NO3- ratio and control treatments, respectively. Moreover, 1-O-caffeoylglucose, 1,3-dicaffeoylquinic acid, aesculetin and quercetin-3-galactoside were increased by the application of the 100% NH4+/0% NO3- ratio in soil-grown lettuce. The 25% NH4+/75% NO3- ratio was more suitable in the hydroponic cultivation system to obtain increased lettuce biomass. The metabolic profiling of lettuce showed different behaviors when applying different NH4+/NO3- ratios. Therefore, the majority of the parameters were largely influenced by the 25% NH4+/75% NO3- ratio, which resulted in the hyper-accumulation of health-promoting compounds in lettuce. In conclusion, the optimal N applications improve the quality of lettuce grown in soil, substrate and hydroponic cultivation systems which ultimately boost the nutritional value of lettuce.
RESUMEN
Phosphorus (P) is a non-renewable resource which may be depleted within next few decades; hence high P use efficiency is need of time. Plants have evolved an array of adaptive mechanisms to enhance external P acquisition and reprioritize internal utilization under P deficiency. Tissue specific biomass and P allocation patterns may affect the P use efficiency in plants. six rice cultivars were grown in solution culture for 20 days and then were divided into two groups to receive either adequate P or no P that were harvested at 30, 40 and 50 days. Plants were dissected into various tissues/organs. Two rice cultivars viz Super Basmati (P-inefficient) and PS-2 (P-efficient) were grown in soil with no or 50 mg P kg-1 soil till maturity. Rice cultivars PS-2 and Basmati-2000 had higher P uptake, utilization efficiency and internal remobilization than other tested cultivars after P omission. Young leaves and roots were the major sinks while stems and mature leaves were the sources of P during P omission. In conclusion, biomass allocation and P accumulation among various tissues and P remobilization were major factors responsible for P efficiency.
Asunto(s)
Biomasa , Oryza/crecimiento & desarrollo , Fósforo/metabolismo , Hojas de la Planta/crecimiento & desarrollo , Raíces de Plantas/crecimiento & desarrollo , Suelo/química , Transporte Biológico , Especificidad de Órganos , Oryza/metabolismo , Hojas de la Planta/metabolismo , Raíces de Plantas/metabolismoRESUMEN
Production of phosphorus efficient crop cultivars can increase food productivity and decrease environmental pollution. Categorization of existing germplasm is a prerequisite to develop P efficient crop cultivars. For first experiment, 30 wheat genotypes were grown in hydroponics with two P levels (i.e., deficit, 20 µm KH2PO4 and adequate, 200 µm KH2PO4). Genotypes differed significantly for various P efficiency parameters. Two genotypes (Dirk and Bhakkar-02) showed < 25% decrease in growth at P deficiency. Genotype Seher-06 proved to be inefficient. Twelve selected genotypes based on the first experiment were sown in soil with two P levels (0 and 30 mg P kg-1) till maturity. As expected, genotypes differed for grain yield at both P levels. The efficient cultivars selected on the basis of both absolute and relative dry matter production at both P levels such as Dirk. Genotypes were grouped into three, four and nine classes on the basis of various parameters for P efficiency as proposed by different researchers. Most genotypes behaved in a similar fashion by different categorization methods and also at different P supply. The method to categorize the genotypes into three classes and plotting them into 9 classes proposed by Gill and his coworkers, is the best to differentiate the minor differences in genotypes. At least three different parameters at both P regimes should be used. The parameters may vary as per objectives of the study and/or growth conditions.
Asunto(s)
Genotipo , Fósforo/metabolismo , Triticum/crecimiento & desarrollo , Biomasa , Genoma de Planta , Técnicas de Genotipaje , Fósforo/análisis , Hojas de la Planta/genética , Hojas de la Planta/crecimiento & desarrollo , Hojas de la Planta/metabolismo , Suelo/química , Triticum/genética , Triticum/metabolismoRESUMEN
Cadmium (Cd) is a biologically non-essential heavy metal while the cultivation of Cd-tolerant varieties/hybrids (V) seems the most promising strategy for remediation of Cd-contaminated soils. For this, 24-day-old seedlings of seven maize hybrids, DKC 65-25, DKC 61-25, DKC 919, 23-T-16, 32-B-33, 31-P-41, and Syn hybrid, were grown in hydroponic conditions for 21 additional days in various Cd concentrations (0, 5, 10, and 15 µM). Effects of variety, Cd, and their interaction were highly significant (p ≤ 0.05) for studied plant agronomic and physiological traits except the V × Cd interaction for leaf chlorophyll content, root-shoot length, and root dry weight. The Cd accumulation in root and shoot increased gradually with increasing Cd treatments while copper (Cu), zinc (Zn), and manganese (Mn) uptake was decreased in all hybrids. The reduction in root and shoot biomass and Cd uptake was lower in 32-B-33 and 23-T-16 compared to other hybrids. The highest accumulation of Cu, Zn, and Mn was observed in 32-B-33, DK C65-25, and 31-P-41, respectively. The differential uptake and accumulation of Cd by maize hybrids may be useful in selection and breeding for Cd-tolerant genotypes.
Asunto(s)
Cadmio/toxicidad , Fotosíntesis , Contaminantes del Suelo/toxicidad , Zea mays , Biomasa , Clorofila/metabolismo , Cobre , Contaminación Ambiental , Hidroponía , Manganeso , Hojas de la Planta/metabolismo , Raíces de Plantas , Plantones , Zinc/análisisRESUMEN
Cadmium (Cd) accumulation in agricultural soils is one of the major threats to food security. The application of inorganic amendments such as mono-ammonium phosphate (MAP), gypsum and elemental sulfur (S) could alleviate the negative effects of Cd in crops. However, their long-term residual effects on decreasing Cd uptake in latter crops remain unclear. A field that had previously been applied with treatments including control and 0.2, 0.4 and 0.8% by weight of each MAP, gypsum and S, and grown with wheat and rice and thereafter wheat in the rotation was selected for this study. Wheat (Triticum aestivum L.) was grown in the same field as the third crop without further application of amendments to evaluate the residual effects of the amendments on Cd uptake by wheat. Plants were harvested at maturity and grain, and straw yield along with Cd concentration in soil, straw, and grains was determined. The addition of MAP and gypsum significantly increased wheat growth and yield and decreased Cd accumulation in straw and grains compared to control while the reverse was found in S application. Both MAP and gypsum decreased AB-DTPA extractable Cd in soil while S increased the bioavailable Cd in soil. Both MAP and gypsum increased the Cd immobilization in the soil and S decreased Cd immobilization in a dose-additive manner. We conclude that MAP and gypsum had a significant residual effect on decreasing Cd uptake in wheat. The cost-benefit ratio revealed that gypsum is an effective amendment for decreasing Cd concentration in plants.