RESUMEN
PURPOSE: To evaluate the radiation dose differences for intraprocedural computed tomography (CT) imaging between cone-beam CT and angio-CT acquired during transarterial radioembolization (TARE) therapies for hepatocellular carcinoma. MATERIALS AND METHODS: A retrospective cohort of 22 patients who underwent 23 TARE procedures were selected. Patients were imaged in both cone-beam CT and angio-CT rooms as a part of their conventional treatment plan. Effective dose contributions from individual CT acquisitions as well as the cumulative dose contributions from procedural 3D imaging were evaluated. Angiography dose contributions were omitted. Cone-beam CT images were acquired on a C-arm Philips Allura system. Effective doses were evaluated by coupling previously published conversion factors (effective dose per dose-area product) to patient's dose-area product meter readings after the procedure. Angio-CT images were acquired on a hybrid Canon Infinix-i Aquilion PRIME system. Effective doses from angio-CT scans were estimated using Radimetrics. Comparisons of a single patient's dose differential between the 2 technologies were made. RESULTS: The mean effective dose from a single CT scan was 6.42 mSv and 5.99 mSv in the cone-beam CT room and the angio-CT room, respectively (P = .3224), despite the greater field of view and average craniocaudal scan coverage in angio-CT. The mean effective dose summed across all CTs in a procedure was 12.89 mSv and 34.35 mSv in the cone-beam CT room and the angio-CT room, respectively (P = .0018). CONCLUSIONS: The mean effective dose per CT scan is comparable between cone-beam CT and angio-CT when considered in direct comparison for a single patient.
Asunto(s)
Carcinoma Hepatocelular/terapia , Angiografía por Tomografía Computarizada , Tomografía Computarizada de Haz Cónico , Embolización Terapéutica , Neoplasias Hepáticas/terapia , Dosis de Radiación , Radiofármacos/administración & dosificación , Carcinoma Hepatocelular/diagnóstico por imagen , Carcinoma Hepatocelular/patología , Angiografía por Tomografía Computarizada/efectos adversos , Tomografía Computarizada de Haz Cónico/efectos adversos , Embolización Terapéutica/efectos adversos , Humanos , Neoplasias Hepáticas/diagnóstico por imagen , Neoplasias Hepáticas/patología , Valor Predictivo de las Pruebas , Radiofármacos/efectos adversos , Estudios Retrospectivos , Medición de Riesgo , Factores de Riesgo , Factores de Tiempo , Resultado del TratamientoRESUMEN
PURPOSE: The purpose of this study was to experimentally validate UF-RIPSA, a rapid in-clinic peak skin dose mapping algorithm developed at the University of Florida using optically stimulated luminescent dosimeters (OSLDs) and tissue-equivalent phantoms. METHODS: The OSLDs used in this study were InLightTM Nanodot dosimeters by Landauer, Inc. The OSLDs were exposed to nine different beam qualities while either free-in-air or on the surface of a tissue equivalent phantom. The irradiation of the OSLDs was then modeled using Monte Carlo techniques to derive correction factors between free-in-air exposures and more complex irradiation geometries. A grid of OSLDs on the surface of a tissue equivalent phantom was irradiated with two fluoroscopic x ray fields generated by the Siemens Artis zee bi-plane fluoroscopic unit. The location of each OSLD within the grid was noted and its dose reading compared with UF-RIPSA results. RESULTS: With the use of Monte Carlo correction factors, the OSLD's response under complex irradiation geometries can be predicted from its free-in-air response. The predicted values had a percent error of -8.7% to +3.2% with a predicted value that was on average 5% below the measured value. Agreement within 9% was observed between the values of the OSLDs and RIPSA when irradiated directly on the phantom and within 14% when the beam first traverses the tabletop and pad. CONCLUSIONS: The UF-RIPSA only computes dose values to areas of irradiated skin determined to be directly within the x ray field since the algorithm is based upon ray tracing of the reported reference air kerma value, with subsequent corrections for air-to-tissue dose conversion, x ray backscatter, and table/pad attenuation. The UF-RIPSA algorithm thus does not include the dose contribution of scatter radiation from adjacent fields. Despite this limitation, UF-RIPSA is shown to be fairly robust when computing skin dose to patients undergoing fluoroscopically guided interventions.
Asunto(s)
Algoritmos , Fluoroscopía/métodos , Método de Montecarlo , Fantasmas de Imagen , Piel/efectos de la radiación , Calibración , Humanos , Dosis de Radiación , Dispersión de Radiación , Rayos XRESUMEN
OBJECTIVE: ICRP Task Group 113 is developing reference values of organ and effective dose coefficients for radiography, fluoroscopy, and computed tomography imaging exams. In support of these efforts, our focus is on pediatric diagnostic fluoroscopy. Contrast agents used during clinical examinations are an important consideration of the work undertaken by the Task Group. This work demonstrates the importance of including organ contrast volume concentrations for the calculation of reference organ dose coefficients in the voiding cystourethrogram (VCUG). APPROACH: The ICRP newborn and 15-year female reference phantoms were utilized within the Particle and Heavy Ion Transport code System (PHITS) for the calculation of organ dose coefficients. A pediatric radiologist with over 30 years of clinical experience defined the imaging fields for a VCUG examination consistent with clinical practice. Of these, four imaging fields were selected for investigation. The transport simulations modeled an iodinated contrast solution similar to Bracco Group's 18% weight per volume, cystografin diatrizoate meglumine and typical bladder content was supplemented to make up the remainder volume. Iodinated contrast volumes of 0, 25, 50, 75, and 100 percent concentration by volume were modeled and associated dose coefficients for in-field organs were computed. MAIN RESULTS: Organ dose coefficients were calculated for the urinary bladder wall, colon wall, ovaries, and uterus for both female phantoms under irradiation geometries representative of a VCUG examination. Some organ dose coefficients increased with iodine volume in the bladder and other organ dose coefficients decreased as the iodine contrast volume completely filled the bladder (100%). SIGNIFICANCE: The study results demonstrate for the newborn phantom percent differences in organ dose coefficients varied between 0-10% for the organs of interest, while they varied between 0-22% in the 15-year phantom suggesting the importance of including contrast media in Monte Carlo radiation transport simulations of the VCUG examination. .
RESUMEN
PURPOSE: The purpose of this work was to determine the water-equivalent thickness of Superflab bolus material for narrow and broad field-of-view (FOV) x-ray geometries at diagnostic x-ray energies. METHODS: Transmission measurements were performed for incremental thicknesses of Superflab bolus material and water in narrow and broad FOV x-ray geometries. The transmission data was fit to a non-linear model for x-ray transmission - the Archer model. Water-equivalent thickness of Superflab was calculated based upon fitting parameters to transmission curves for 75, 95, and 115 kV x-ray tube voltages. Measured x-ray transmission factors for water and Superflab were used to determine the water equivalence of Superflab. RESULTS: For all x-ray tube voltages and geometries, the water equivalence of Superflab was greater than one, indicating that Superflab is more attenuating than water. This effect was stronger for broad FOV geometries. At 95 kV, 30 cm of Superflab corresponded to 32.0 cm of water in the narrow FOV geometry, and 34.3 cm of water in the broad FOV geometry. The Archer model fitting parameters and Superflab water equivalence are reported for all x-ray beam conditions explored in this work. CONCLUSIONS: Superflab bolus material is more attenuating than water at diagnostic x-ray energies. The Archer model and its respective fitting parameters reported in this work may be used to estimate the water-equivalent thickness of Superflab for diagnostic x-ray spectra.
Asunto(s)
Agua , Radiografía , Rayos XRESUMEN
Computed tomography (CT) artifacts are aberrations that usually degrade the image quality of CT images, but occasionally provide insights regarding actual imaging findings. The presence of artifacts can be attributed to various sources, including patient, scanner, and postprocessing factors. Artifacts can lead to diagnostic errors by obscuring findings or by being misinterpreted as actual lesions. This article reviews various types of CT artifacts that can be encountered in the head and neck region and explain how these artifacts may be mitigated. While we cannot fully eliminate the occurrence of CT artifacts, building an awareness of their cause provides reading physicians the tools to detect and read through their presence. Further, this knowledge may be applied to contribute to protocol adjustments to improve a site's overall imaging practice.
Asunto(s)
Artefactos , Tomografía Computarizada por Rayos X , Cabeza/diagnóstico por imagen , Humanos , Cuello/diagnóstico por imagen , Tomografía Computarizada por Rayos X/métodosRESUMEN
MR Imaging artifacts are features appearing in MR images that are not present in the original anatomy. MR imaging artifacts can be patient-related, hardware-related, or signal-processing-related and affect diagnostic quality or mimic pathology. It is necessary to take MR imaging artifacts into consideration when interpreting images. A basic knowledge of MR imaging physics and the potential origin of MR imaging artifacts can help to find solutions to eliminate or reduce the influence of artifacts on image quality by adjusting acquisition parameters appropriately for a better diagnosis.
Asunto(s)
Artefactos , Imagen por Resonancia Magnética , Cabeza/diagnóstico por imagen , Humanos , Imagen por Resonancia Magnética/métodos , CuelloRESUMEN
RATIONALE AND OBJECTIVES: The purpose of this study was to develop and evaluate a patient thickness-based protocol specifically for the confirmation of enteric tube placements in bedside abdominal radiographs. Protocol techniques were set to maintain image quality while minimizing patient dose. MATERIALS AND METHODS: A total of 226 pre-intervention radiographs were obtained to serve as a baseline cohort for comparison. After the implementation of a thickness-based protocol, a total of 229 radiographs were obtained as part of an intervention cohort. Radiographs were randomized and graded for diagnostic quality by seven expert radiologists based on a standardized conspicuity scale (grades: 0 non-diagnostic to 3+). Basic patient demographics, body mass index, ventilatory status, and enteric tube type were recorded and subgroup analyses were performed. Effective dose was estimated for both cohorts. RESULTS: The dedicated thickness-based protocol resulted in a significant reduction in effective dose of 80% (p-value < 0.01). There was no significant difference in diagnostic quality between the two cohorts with 209 (92.5%) diagnostic radiographs in the baseline and 221 (96.5%) diagnostic radiographs in the thickness-based protocol (p-value 0.06). CONCLUSION: A protocol optimized for the confirmation of enteric tube placements was developed. This protocol results in lower patient effective dose, without sacrificing diagnostic accuracy. The technique chart is provided for reference. The protocol development process outlined in this work could be readily generalized to other imaging clinical tasks.
Asunto(s)
Reducción Gradual de Medicamentos , Radiografía Abdominal , Humanos , Dosis de Radiación , Radiografía , RadiólogosRESUMEN
PURPOSE: Inkjet printers can be used to fabricate anthropomorphic phantoms by the use of iodine-doped ink. However, challenges persist in implementing this technique. The calibration from grayscale to ink density is complex and time-consuming. The purpose of this work is to develop a printing methodology that requires a simpler calibration and is less dependent on printer characteristics to produce the desired range of x-ray attenuation values. METHODS: Conventional grayscale printing was substituted by single-tone printing; that is, the superposition of pure black layers of iodinated ink. Printing was performed with a consumer-grade inkjet printer using ink made of potassium-iodide (KI) dissolved in water at 1 g/ml. A calibration for the attenuation of ink was measured using a commercial x-ray system at 70 kVp. A neonate radiograph obtained at 70 kVp served as an anatomical model. The attenuation map of the neonate radiograph was processed into a series of single-tone images. Single-tone images were printed, stacked, and imaged at 70 kVp. The phantom was evaluated by comparing attenuation values between the printed phantom and the original radiograph; attenuation maps were compared using the structural similarity index measure (SSIM), while attenuation histograms were compared using the Kullback-Leibler (KL) divergence. A region of interest (ROI)-based analysis was also performed, where the attenuation distribution within given ROIs was compared between phantom and patient. The phantom sharpness was evaluated in terms of modulation transfer function (MTF) estimates and signal spread profiles of high spatial resolution features in the image. RESULTS: The printed phantom required 36 pages. The printing queue was automated and it took about 2 h to print the phantom. The radiograph of the printed phantom demonstrated a close resemblance to the original neonate radiograph. The SSIM of the phantom with respect to that of the patient was 0.53. Both patient and phantom attenuation histograms followed similar distributions, and the KL divergence between such histograms was 0.20. The ROI-based analysis showed that the largest deviations from patient attenuation values were observed at the higher and lower ends of the attenuation range. The limiting resolution of the proposed methodology was about 1 mm. CONCLUSION: A methodology to generate a neonate phantom for 2D imaging applications, using single-tone printing, was developed. This method only requires a single-value calibration and required less than 2 h to print a complete phantom.
Asunto(s)
Modelos Anatómicos , Impresión Tridimensional , Calibración , Humanos , Recién Nacido , Fantasmas de Imagen , Radiografía , Rayos XRESUMEN
Of all the medical imaging modalities that utilize ionizing radiation, fluoroscopy proves to be the most difficult to assess values of patient organ dose owing to the dynamic and patient-specific nature of the irradiation geometry and its associated x-ray beam characteristics. With the introduction of the radiation dose structured report (RDSR) in the mid-2000s, however, computational tools have been developed to extract patient and procedure-specific data for each irradiation event of the study, and when coupled to a computational phantom of the patient, values of skin and internal organ dose may be assessed. Unfortunately, many legacy and even current diagnostic fluoroscopy units do not have RDSR reporting capabilities, thus limiting these dosimetry reporting advances. Nevertheless, knowledge of patient organ doses for patient care, as well as for radiation epidemiology studies, remains a research and regulatory priority. In this study, we created procedural outlines which document all radiation exposure information required for organ dose assessment, akin to a reference RDSR, for six common diagnostic fluoroscopy procedures performed at the University of Florida (UF) Shands Pediatric Hospital. These procedures include the voiding cystourethrogram, the gastrostomy-tube placement, the lower gastrointestinal study, the rehabilitation swallow, the upper gastrointestinal study, and the upper gastrointestinal study with follow through. These procedural outlines were used to develop an extensive database of organ doses for the 162-member UF/NCI (National Cancer Institute) library of pediatric hybrid phantoms, with each member varying combinations of sex, height, and weight. The organ dose assessment accounts for the varying x-ray fields, fluoroscopy time, relative concentration of x-ray contrast in the organs, and changes in the fluoroscope output due to patient size. Furthermore, we are also reporting organ doses normalized to total fluoroscopy time, reference point air kerma, and kerma-area product, effectively providing procedure dose coefficients. The extensive organ dose library produced in this study may be used prospectively for patient organ dose reporting or retrospectively in epidemiological studies of radiation-associated health risks.
Asunto(s)
Bases de Datos Factuales , Fluoroscopía , Dosis de Radiación , Universidades , Peso Corporal , Niño , Preescolar , Femenino , Humanos , Fantasmas de Imagen , Exposición a la Radiación , RadiometríaRESUMEN
Assessment of health effects from low-dose radiation exposures in patients undergoing diagnostic imaging is an active area of research. High-quality dosimetry information pertaining to these medical exposures is generally not readily available to clinicians or epidemiologists studying radiation-related health risks. The purpose of this study was to provide methods for organ dose estimation in pediatric patients undergoing four common diagnostic fluoroscopy procedures: the upper gastrointestinal (UGI) series, the lower gastrointestinal (LGI) series, the voiding cystourethrogram (VCUG) and the modified barium swallow (MBS). Abstracted X-ray film data and physician interviews were combined to generate procedure outlines detailing X-ray beam projections, imaged anatomy, length of X-ray exposure, and presence and amount of contrast within imaged anatomy. Monte Carlo radiation transport simulations were completed for each of the four diagnostic fluoroscopy procedures across the 162-member (87 males and 75 females) University of Florida/National Cancer Institute pediatric phantom library, which covers variations in both subject height and weight. Absorbed doses to 28 organs, including the active marrow and bone endosteum, were assigned for all 162 phantoms by procedure. Additionally, we provide dose coefficients (DCs) in a series of supplementary tables. The DCs give organ doses normalized to procedure-specific dose metrics, including: air kerma-area product (µGy/mGy · cm2), air kerma at the reference point (µGy/µGy), number of spot films (SF) (µGy/number of SFs) and total fluoroscopy time (µGy/s). Organs accumulating the highest absorbed doses per procedure were as follows: kidneys between 0.9-25.4 mGy, 1.1-16.6 mGy and 1.1-9.7 mGy for the UGI, LGI and VCUG procedures, respectively, and salivary glands between 0.2-3.7 mGy for the MBS procedure. Average values of detriment-weighted dose, a phantom-specific surrogate for the effective dose based on ICRP Publication 103 tissue-weighting factors, were 0.98 mSv, 1.16 mSv, 0.83 mSv and 0.15 mSv for the UGI, LGI, VCUG and MBS procedures, respectively. Scalable database of organ dose coefficients by patient sex, height and weight, and by procedure exposure time, reference point air kerma, kerma-area product or number of spot films, allows clinicians and researchers to compute organ absorbed doses based on their institution-specific and patient-specific dose metrics. In addition to informing on patient dosimetry, this work has the potential to facilitate exposure assessments in epidemiological studies designed to investigate radiation-related risks.
Asunto(s)
Bases de Datos Factuales , Fluoroscopía/métodos , Fantasmas de Imagen , Dosis de Radiación , Radiometría/métodos , Adolescente , Adulto , Bario/farmacocinética , Niño , Simulación por Computador , Femenino , Humanos , Masculino , Método de Montecarlo , Radiografía , Distribución TisularRESUMEN
PURPOSE: To assess various computational phantom alignment techniques within Monte Carlo radiation transport models of pediatric fluoroscopically guided cardiac interventional studies. METHODS: Logfiles, including all procedure radiation and machine data, were extracted from a Toshiba infinix-I unit in the University of Florida Pediatric Catheterization Laboratory for a cohort of 10 patients. Two different alignment methods were then tested against a ground truth standard based upon identification of a unique anatomic reference point within images co-registered to specific irradiation events within each procedure. The first alignment method required measurement of the distance from the edge of the exam table to the top of the patient's head (table alignment method). The second alignment method fixed the anatomic reference point to be the geometric center of the heart muscle, as all 10 studies were cardiac in nature. Monte Carlo radiation transport simulations were performed for each patient and intervention using morphometry-matched hybrid computational phantoms for the reference and two tested alignment methods. For each combination, absorbed doses were computed for 28 organs and root mean square organ doses were assessed and compared across the alignment methods. RESULTS: The percent error in root mean square organ dose ranged from -57% to +41% for the table alignment method, and from -27% to +22% for the heart geometric centroid alignment method. Absorbed doses to specific organs, such as the heart and lungs, demonstrated higher accuracy in the heart geometric centroid alignment method, with average percent errors of 10% and 1.4%, respectively, compared to average percent errors of -32% and 24%, respectively, using the table alignment method. CONCLUSIONS: Of the two phantom alignment methods investigated in this study, the use of an anatomical reference point - in this case the geometric centroid of the heart - provided a reliable method for radiation transport simulations of organ dose in pediatric interventional cardiac studies. This alignment method provides the added benefit of requiring no physician input, making retrospective calculations possible. Moving forward, additional anatomical reference methods can be tested to assess the reliability of anatomical reference points beyond cardiac centered procedures.
RESUMEN
Epidemiologic data demonstrate that pediatric patients face a higher relative risk of radiation induced cancers than their adult counterparts at equivalent exposures. Infants and children with congenital heart defects are a critical patient population exposed to ionizing radiation during life-saving procedures. These patients will likely incur numerous procedures throughout their lifespan, each time increasing their cumulative radiation absorbed dose. As continued improvements in long-term prognosis of congenital heart defect patients is achieved, a better understanding of organ radiation dose following treatment becomes increasingly vital. Dosimetry of these patients can be accomplished using Monte Carlo radiation transport simulations, coupled with modern anatomical patient models. The aim of this study was to evaluate the performance of the University of Florida/National Cancer Institute (UF/NCI) pediatric hybrid computational phantom library for organ dose assessment of patients that have undergone fluoroscopically guided cardiac catheterizations. In this study, two types of simulations were modeled. A dose assessment was performed on 29 patient-specific voxel phantoms (taken as representing the patient's true anatomy), height/weight-matched hybrid library phantoms, and age-matched reference phantoms. Two exposure studies were conducted for each phantom type. First, a parametric study was constructed by the attending pediatric interventional cardiologist at the University of Florida to model the range of parameters seen clinically. Second, four clinical cardiac procedures were simulated based upon internal logfiles captured by a Toshiba Infinix-i Cardiac Bi-Plane fluoroscopic unit. Performance of the phantom library was quantified by computing both the percent difference in individual organ doses, as well as the organ dose root mean square values for overall phantom assessment between the matched phantoms (UF/NCI library or reference) and the patient-specific phantoms. The UF/NCI hybrid phantoms performed at percent differences of between 15% and 30% for the parametric set of irradiation events. Among internal logfile reconstructed procedures, the UF/NCI hybrid phantoms performed with RMS organ dose values between 7% and 29%. Percent improvement in organ dosimetry via the use of hybrid library phantoms over the reference phantoms ranged from 6.6% to 93%. The use of a hybrid phantom library, Monte Carlo radiation transport methods, and clinical information on irradiation events provide a means for tracking organ dose in these radiosensitive patients undergoing fluoroscopically guided cardiac procedures.
Asunto(s)
Cateterismo Cardíaco/métodos , Modelos Anatómicos , Órganos en Riesgo/efectos de la radiación , Fantasmas de Imagen , Radiometría/métodos , Cirugía Asistida por Computador/métodos , Adolescente , Niño , Preescolar , Femenino , Fluoroscopía , Humanos , Lactante , Recién Nacido , Masculino , Método de Montecarlo , Dosis de Radiación , Radiación IonizanteRESUMEN
PURPOSE: To quantify differences in computationally estimated computed tomography (CT) organ doses for patient-specific voxel phantoms to estimated organ doses in matched computational phantoms using different matching criteria. MATERIALS AND METHODS: Fifty-two patient-specific computational voxel phantoms were created through CT image segmentation. In addition, each patient-specific phantom was matched to six computational phantoms of the same gender based, respectively, on age and gender (reference phantoms), height and weight, effective diameter (both central slice and exam range average), and water equivalent diameter (both central slice and exam range average). Each patient-specific phantom and matched computational phantom were then used to simulate six different torso examinations using a previously validated Monte Carlo CT dosimetry methodology that accounts for tube current modulation. Organ doses for each patient-specific phantom were then compared with the organ dose estimates of each of the matched phantoms. RESULTS: Relative to the corresponding patient-specific phantoms, the root mean square of the difference in organ dose was 39.1%, 20.3%, 22.7%, 21.6%, 20.5%, and 17.6%, for reference, height and weight, effective diameter (central slice and scan average), and water equivalent diameter (central slice and scan average), respectively. The average magnitude of difference in organ dose was 24%, 14%, 16.9%, 16.2%, 14%, and 11.9%, respectively. CONCLUSION: Overall, these data suggest that matching a patient to a computational phantom in a library is superior to matching to a reference phantom. Water equivalent diameter is the superior matching metric, but it is less feasible to implement in a clinical and retrospective setting. For these reasons, height-and-weight matching is an acceptable and reliable method for matching a patient to a member of a computational phantom library with regard to CT dosimetry.
Asunto(s)
Método de Montecarlo , Fantasmas de Imagen , Radiometría/instrumentación , Tomografía Computarizada por Rayos X , Adulto , Niño , Femenino , Humanos , Masculino , Dosis de RadiaciónRESUMEN
An image-based skeletal dosimetry model for internal electron sources was created for the ICRP-defined reference adult female. Many previous skeletal dosimetry models, which are still employed in commonly used internal dosimetry software, do not properly account for electron escape from trabecular spongiosa, electron cross-fire from cortical bone, and the impact of marrow cellularity on active marrow self-irradiation. Furthermore, these existing models do not employ the current ICRP definition of a 50 µm bone endosteum (or shallow marrow). Each of these limitations was addressed in the present study. Electron transport was completed to determine specific absorbed fractions to both active and shallow marrow of the skeletal regions of the University of Florida reference adult female. The skeletal macrostructure and microstructure were modeled separately. The bone macrostructure was based on the whole-body hybrid computational phantom of the UF series of reference models, while the bone microstructure was derived from microCT images of skeletal region samples taken from a 45 years-old female cadaver. The active and shallow marrow are typically adopted as surrogate tissue regions for the hematopoietic stem cells and osteoprogenitor cells, respectively. Source tissues included active marrow, inactive marrow, trabecular bone volume, trabecular bone surfaces, cortical bone volume, and cortical bone surfaces. Marrow cellularity was varied from 10 to 100 percent for active marrow self-irradiation. All other sources were run at the defined ICRP Publication 70 cellularity for each bone site. A total of 33 discrete electron energies, ranging from 1 keV to 10 MeV, were either simulated or analytically modeled. The method of combining skeletal macrostructure and microstructure absorbed fractions assessed using MCNPX electron transport was found to yield results similar to those determined with the PIRT model applied to the UF adult male skeletal dosimetry model. Calculated skeletal averaged absorbed fractions for each source-target combination were found to follow similar trends of more recent dosimetry models (image-based models) but did not follow results from skeletal models based upon assumptions of an infinite expanse of trabecular spongiosa.