Noncontact In Situ Multidiagnostic NMR/Dielectric Spectroscopy.

Introduction of a dielectric material in a nuclear magnetic resonance (NMR) probe head modifies the frequency response of the probe circuit, a phenomenon revealed by detuning of the probe. For NMR spectroscopy, this detuning is corrected for by tuning and matching the probe head prior to the NMR measurement. The magnitude of the probe detuning, "the dielectric shift", provides direct access to the dielectric properties of the sample, enabling NMR spectrometers to simultaneously perform both dielectric and NMR spectroscopy. By measuring sample dielectric permittivity as a function of frequency, dielectric permittivity spectroscopy can be performed using the new methodology. As a proof of concept, this was evaluated on methanol, ethanol, 1-propanol, 1-pentanol, and 1-octanol using a commercial cross-polarization magic angle spinning (CPMAS) NMR probe head. The results accurately match the literature data collected by standard dielectric spectroscopy techniques. Subsequently, the method was also applied to investigate the solvent-surface interactions of water confined in the micropores of an MFI-type, hydrophilic zeolite with a Si/Al ratio of 11.5. In the micropores, water adsorbs to BroÌ·nsted acid sites and defect sites, resulting in a drastically decreased dielectric permittivity of the nanoconfined water. Theoretical background for the new methodology is provided using an effective electric circuit model of a CPMAS probe head with a solenoid coil, describing the detuning resulting from the insertion of dielectric samples in the probe head.

Prediction of Cu Zeolite NH3-SCR Activity from Variable Temperature 1H NMR Spectroscopy.

Selective catalytic reduction (SCR) of NOx by ammonia is one of the dominant pollution abatement technologies for near-zero NOx emission diesel engines. A crucial step in the reduction of NOx to N2 with Cu zeolite NH3-SCR catalysts is the generation of a multi-electron donating active site, implying the permanent or transient dimerization of Cu ions. Cu atom mobility has been implicated by computational chemistry as a key factor in this process. This report demonstrates how variable temperature 1H NMR reveals the Cu induced generation of sharp 1H resonances associated with a low concentration of sites on the zeolite. The onset temperature of the appearance of these signals was found to strongly correlate with the NH3-SCR activity and was observed for a range of catalysts covering multiple frameworks (CHA, AEI, AFX, ERI, ERI-CHA, ERI-OFF, *BEA), with different Si/Al ratios and different Cu contents. The results point towards universal applicability of variable temperature NMR to predict the activity of a Cu-zeolite SCR catalyst. The unique relationship of a spectroscopic feature with catalytic behavior for zeolites with different structures and chemical compositions is exceptional in heterogeneous catalysis.

Absolute Quantification of Residual Solvent in Mesoporous Silica Drug Formulations Using Magic-Angle Spinning NMR Spectroscopy.

Porous silica is used as a drug delivery agent to improve the bioavailability of sparsely soluble compounds. In this approach, the active pharmaceutical ingredient (API) is commonly loaded into the porous silica by incipient wetness impregnation using organic solvents. Subsequent solvent elimination is critical as the residual solvent concentration cannot exceed threshold values set by health and safety regulations (e.g., EMA/CHMP/ICH/82260/2006). For dichloromethane and methanol, for example, residual concentrations must be below 600 and 3000 ppm, respectively. Today, EU and USA Pharmacopoeias recommend tedious procedures for residual solvent quantification, requiring extraction of the solvent and subsequent quantification using capillary gas chromatography with static headspace sampling (sHS-GC). This work presents a new method based on the combination of standard addition and absolute quantification using magic-angle spinning nuclear magnetic resonance spectroscopy (MAS qNMR). The methodology was originally developed for absolute quantification of water in zeolites and has now been validated for quantification of residual solvent in drug formations using mesoporous silica loaded with ibuprofen dissolved in DCM and MeOH as test samples. Interestingly, formulations prepared using as-received or predried mesoporous silica contained 5465 versus 484.9 ppm DCM, respectively. This implies that the initial water content of the silica carrier can impact the residual solvent concentration in drug-loaded materials. This observation could provide new options to minimize the occurrence of these undesired solvents in the final formulation.

How Water and Ion Mobility Affect the NMR Fingerprints of the Hydrated JBW Zeolite: A Combined Computational-Experimental Investigation.

An important aspect within zeolite synthesis is to make fully tunable framework materials with controlled aluminium distribution. A major challenge in characterising these zeolites at operating conditions is the presence of water. In this work, we investigate the effect of hydration on the 27 Al NMR parameters of the ultracrystalline K,Na-compensated aluminosilicate JBW zeolite using experimental and computational techniques. The JBW framework, with Si/Al ratio of 1, is an ideal benchmark system as a stepping stone towards more complicated zeolites. The presence and mobility of water and extraframework species directly affect NMR fingerprints. Excellent agreement between theoretical and experimental spectra is obtained provided dynamic methods are employed with hydrated structural models. This work shows how NMR is instrumental in characterising aluminium distributions in zeolites at operating conditions.

Selective catalytic reduction of NOx with ammonia (NH3-SCR) over copper loaded LEV type zeolites synthesized with different templates.

LEV type zeolites were synthesized with four different structure-directing agents and converted to copper loaded NH3-SCR catalysts. The synthesis recipe was found to impact the respective Al population in the two topologically different framework sites in double and single 6-rings, resolvable by 27Al MAS NMR spectroscopy. Hydrothermal stability was found to be related to the silanol concentration, Si/Al ratio, particle size, crystal morphology, crystal defects, external surface area, and microporosity. Catalytic activity in NH3-SCR was dependent on preferential Al siting in the double 6-rings. Levinite synthesized using adamantylamine showed the strongest preference for Al atoms sitting in double 6-ring sites, and showed the highest catalytic turnover frequency. Unfortunately, because of the large crystal size, copper loading of this sample was limited to 0.6 wt% while other samples could be loaded with copper up to 3.3 wt%. An optimum combination of hydrothermal stability and catalytic activity was obtained with N,N'-bis-dimethylpentanediyldiammonium dibromide as structure-directing agent.

Chlorination of a Zeolitic-Imidazolate Framework Tunes Packing and van der Waals Interaction of Carbon Dioxide for Optimized Adsorptive Separation.

Molecular separation of carbon dioxide (CO2) and methane (CH4) is of growing interest for biogas upgrading, carbon capture and utilization, methane synthesis and for purification of natural gas. Here, we report a new zeolitic-imidazolate framework (ZIF), coined COK-17, with exceptionally high affinity for the adsorption of CO2 by London dispersion forces, mediated by chlorine substituents of the imidazolate linkers. COK-17 is a new type of flexible zeolitic-imidazolate framework Zn(4,5-dichloroimidazolate)2 with the SOD framework topology. Below 200 K it displays a metastable closed-pore phase next to its stable open-pore phase. At temperatures above 200 K, COK-17 always adopts its open-pore structure, providing unique adsorption sites for selective CO2 adsorption and packing through van der Waals interactions with the chlorine groups, lining the walls of the micropores. Localization of the adsorbed CO2 molecules by Rietveld refinement of X-ray diffraction data and periodic density functional theory calculations revealed the presence and nature of different adsorption sites. In agreement with experimental data, grand canonical Monte Carlo simulations of adsorption isotherms of CO2 and CH4 in COK-17 confirmed the role of the chlorine functions of the linkers and demonstrated the superiority of COK-17 compared to other adsorbents such as ZIF-8 and ZIF-71.

NMR Crystallography Reveals Carbonate Induced Al-Ordering in ZnAl Layered Double Hydroxide.

Layered double hydroxides (LDHs) serve a score of applications in catalysis, drug delivery, and environmental remediation. Smarter crystallography, combining X-ray diffraction and NMR spectroscopy revealed how interplay between carbonate and pH determines the LDH structure and Al ordering in ZnAl LDH. Carbonate intercalated ZnAl LDHs were synthesized at different pH (pH 8.5, pH 10.0, pH 12.5) with a Zn/Al ratio of 2, without subsequent hydrothermal treatment to avoid extensive recrystallisation. In ideal configuration, all Al cations should be part of the LDH and be coordinated with 6 Zn atoms, but NMR revealed two different Al local environments were present in all samples in a ratio dependent on synthesis pH. NMR-crystallography, integrating NMR spectroscopy and X-ray diffraction, succeeded to identify them as Al residing in the highly ordered crystalline phase, next to Al in disordered material. With increasing synthesis pH, crystallinity increased, and the side phase fraction decreased. Using 1 H-13 C, 13 C-27 Al HETCOR NMR in combination with 27 Al MQMAS, 27 Al-DQ-SQ measurements and Rietveld refinement on high-resolution PXRD data, the extreme anion exchange selectivity of these LDHs for CO3 2- over HCO3 - was linked to strict Al and CO3 2- ordering in the crystalline LDH. Even upon equilibration of the LDH in pure NaHCO3 solutions, only CO3 2- was adsorbed by the LDH. This reveals the structure directing role of bivalent cations such as CO3 2- during crystallization of [M2+ 4 M3+ 2 (OH)2 ]2+ [A2- ]1 ⋅yH2 O LDH phases.

Long-Term Generation of Longitudinal Spin Order Controlled by Ammonia Ligation Enables Rapid SABRE Hyperpolarized 2D NMR.

Symmetry breaking of parahydrogen using iridium catalysts converts singlet spin order into observable hyperpolarization. In this contribution, iridium catalysts are designed to exhibit asymmetry in their hydrides, regulated by in situ generation of deuterated ammonia governed by ammonium buffers. The concentrations of ammonia (N) and pyridine (P) provide a handle to generate a variety of stereo-chemically asymmetric N-heterocyclic carbene iridium complexes, ligating either [3xP], [2xP;N], [P;2xN] or [3xN] in an octahedral SABRE type configuration. The non-equivalent hydride positions, in correspondence with the ammonium buffer solutions, enables to extend singlet-triplet or S⟩→T0⟩ mixing at high magnetic field and experimentally induce prolonged generation of non-equilibrium longitudinal two-spin order. This long-lasting magnetization can be exploited in hyperpolarized 2D-OPSY-COSY experiments providing direct structural information on the catalyst using a single contact with parahydrogen. Separately, field cycling revealed hyperpolarization properties in low-field conditions. Controlling catalyst stereochemistry by introducing small and deuterated ligands, such as deuterated ammonia, simplifies the spin-system. This is shown to unify experimental and theoretically derived field-sweep experiments for four-spin systems.

Long-Term Generation of Longitudinal Spin Order Controlled by Ammonia Ligation Enables Rapid SABRE Hyperpolarized 2D NMR.

The front cover artwork front cover artwork is provided by NMRCoRe, the Flemish NMR/X-Ray platform for Convergence Research and was designed by Ir. Ewoud Vaneeckhaute and Dr. Eric Breynaert. The image shows the reciprocity between parahydrogen, deuterated ammonia and iridium allowing for hyperpolarized 2D NMR via long-term availability of longitudinal spin order. Read the full text of the Article at 10.1002/cphc.202100079.

Nanoscale intimacy in bifunctional catalysts for selective conversion of hydrocarbons.

The ability to control nanoscale features precisely is increasingly being exploited to develop and improve monofunctional catalysts. Striking effects might also be expected in the case of bifunctional catalysts, which are important in the hydrocracking of fossil and renewable hydrocarbon sources to provide high-quality diesel fuel. Such bifunctional hydrocracking catalysts contain metal sites and acid sites, and for more than 50 years the so-called intimacy criterion has dictated the maximum distance between the two types of site, beyond which catalytic activity decreases. A lack of synthesis and material-characterization methods with nanometre precision has long prevented in-depth exploration of the intimacy criterion, which has often been interpreted simply as 'the closer the better' for positioning metal and acid sites. Here we show for a bifunctional catalyst--comprising an intimate mixture of zeolite Y and alumina binder, and with platinum metal controllably deposited on either the zeolite or the binder--that closest proximity between metal and zeolite acid sites can be detrimental. Specifically, the selectivity when cracking large hydrocarbon feedstock molecules for high-quality diesel production is optimized with the catalyst that contains platinum on the binder, that is, with a nanoscale rather than closest intimacy of the metal and acid sites. Thus, cracking of the large and complex hydrocarbon molecules that are typically derived from alternative sources, such as gas-to-liquid technology, vegetable oil or algal oil, should benefit especially from bifunctional catalysts that avoid locating platinum on the zeolite (the traditionally assumed optimal location). More generally, we anticipate that the ability demonstrated here to spatially organize different active sites at the nanoscale will benefit the further development and optimization of the emerging generation of multifunctional catalysts.

Water as a tuneable solvent: a perspective.

Water is the sustainable solvent of excellence, but its high polarity limits the solubility of non-polar compounds. Confinement of water in hydrophobic pores alters its hydrogen bonding structure and related properties such as dielectric constant and solvation power. Whether this special state of confined water can be rendered useful in chemical processes is hitherto underexplored. Confining water in hydrophobic nanopores could be a way to modulate water solvent properties, enabling the use of water as a tuneable solvent (WaTuSo). Applying pressure forces a heterogeneous mixture of poorly soluble molecules and water into hydrophobic nanopores of a host material where the lowered polarity of water enhances dissolution. Decompression after reaction causes expulsion of the solution from the pores and spontaneous demixing of reaction products because water returns to its normal polar state. Temporary dissolution enhancement during confinement is expected to be advantageous to chemical reaction and molecular storage. Nano-confined water offers a potential alternative to compression for storing CH4 and H2 gas, and opens new opportunities for green chemistry such as aqueous phase hydrogenation reactions which benefit from enhanced hydrogen solubility. Unprecedented control in time and space over H2O solvation properties in a WaTuSo system will enable new technologies with major scientific and societal impact.

Strongly Reducing (Diarylamino)benzene-Based Covalent Organic Framework for Metal-Free Visible Light Photocatalytic H2O2 Generation.

Photocatalytic reduction of molecular oxygen is a promising route toward sustainable production of hydrogen peroxide (H2O2). This challenging process requires photoactive semiconductors enabling solar energy driven generation and separation of electrons and holes with high charge transfer kinetics. Covalent organic frameworks (COFs) are an emerging class of photoactive semiconductors, tunable at a molecular level for high charge carrier generation and transfer. Herein, we report two newly designed two-dimensional COFs based on a (diarylamino)benzene linker that form a Kagome (kgm) lattice and show strong visible light absorption. Their high crystallinity and large surface areas (up to 1165 m2·g-1) allow efficient charge transfer and diffusion. The diarylamine (donor) unit promotes strong reduction properties, enabling these COFs to efficiently reduce oxygen to form H2O2. Overall, the use of a metal-free, recyclable photocatalytic system allows efficient photocatalytic solar transformations.

Alumina: discriminative analysis using 3D correlation of solid-state NMR parameters.

Synthetic transition aluminas (χ, κ, θ, γ, δ, η, ρ) exhibit unique adsorptive and catalytic properties leading to numerous practical applications. Generated by thermal transformation of aluminium (oxy)hydroxides, structural differences between them arise from the variability of aluminium coordination numbers and degree of dehydroxylation. Unequivocal identification of these phases using X-ray diffraction has proven to be very difficult. Quadrupolar interactions of 27Al nuclei, highly sensitive to each site symmetry, render advanced 27Al solid-state NMR a unique spectroscopic tool to fingerprint and identify the different phases. In this paper, 27Al NMR spectroscopic data on alumina reported in literature are collected in a comprehensive library. Based on this dataset, a new 3D correlative method of NMR parameters is presented, enabling fingerprinting and identification of such phases. Providing a gold standard from crystalline samples, this approach demonstrates that any sort of crystalline, ill crystallized or amorphous, mixed periodic or aperiodically ordered transition alumina can now be assessed beyond the current limitations of characterisation. Adopting the presented approach as a standard characterisation of alumina samples will readily reveal NMR parameter-structure-property relations suitable to develop new or improved applications of alumina. Methodological guidance is provided to assist consistent implementation of this characterisation throughout the fields involved.

Towards Green Ammonia Synthesis through Plasma-Driven Nitrogen Oxidation and Catalytic Reduction.

Ammonia is an industrial large-volume chemical, with its main application in fertilizer production. It also attracts increasing attention as a green-energy vector. Over the past century, ammonia production has been dominated by the Haber-Bosch process, in which a mixture of nitrogen and hydrogen gas is converted to ammonia at high temperatures and pressures. Haber-Bosch processes with natural gas as the source of hydrogen are responsible for a significant share of the global CO2 emissions. Processes involving plasma are currently being investigated as an alternative for decentralized ammonia production powered by renewable energy sources. In this work, we present the PNOCRA process (plasma nitrogen oxidation and catalytic reduction to ammonia), combining plasma-assisted nitrogen oxidation and lean NOx trap technology, adopted from diesel-engine exhaust gas aftertreatment technology. PNOCRA achieves an energy requirement of 4.6 MJ mol-1 NH3 , which is more than four times less than the state-of-the-art plasma-enabled ammonia synthesis from N2 and H2 with reasonable yield (>1 %).

N2 Electroreduction to NH3 by Selenium Vacancy-Rich ReSe2 Catalysis at an Abrupt Interface.

Vacancy engineering has been proved repeatedly as an adoptable strategy to boost electrocatalysis, while its poor selectivity restricts the usage in nitrogen reduction reaction (NRR) as overwhelming competition from hydrogen evolution reaction (HER). Revealed by density functional theory calculations, the selenium vacancy in ReSe2 crystal can enhance its electroactivity for both NRR and HER by shifting the d-band from -4.42 to -4.19 eV. To restrict the HER, we report a novel method by burying selenium vacancy-rich ReSe2 @carbonized bacterial cellulose (Vr -ReSe2 @CBC) nanofibers between two CBC layers, leading to boosted Faradaic efficiency of 42.5 % and ammonia yield of 28.3 µg h-1 cm-2 at a potential of -0.25 V on an abrupt interface. As demonstrated by the nitrogen bubble adhesive force, superhydrophilic measurements, and COMSOL Multiphysics simulations, the hydrophobic and porous CBC layers can keep the internal Vr -ReSe2 @CBC nanofibers away from water coverage, leaving more unoccupied active sites for the N2 reduction (especially for the potential determining step of proton-electron coupling and transferring processes as *NN → *NNH).

A Porous POSiSil Suited for Pressure-Driven Reversible Confinement of Solutions: PSS-2.

Polyoligosiloxysilicone (POSiSil; designated PSS-2) is a copolymer of double four-ring (D4R) cyclosilicate and dimethylsiloxane. It is synthesized by linking D4R units in tetrabutylammonium cyclosilicate crystals with dimethyldichlorosilane. The structure of PSS-2 was revealed using solid state NMR spectroscopy. In this 3D copolymer D4R units are connected systematically by short siloxane chains most likely composed of 2 to 3 dimethylsiloxane monomers. Controlling the conversion of the parent material allows for tuning the porosity of PSS-2. Residual parent material is embedded inside PSS-2 polymer and can be eliminated by calcination. This leaves nanovoids inside PSS-2, which is moderately hydrophobic. Pressure-driven intrusion-extrusion cycles of aqueous solution exhibit hysteresis, thus, PSS-2 can be used as reversible confinement for liquids with a capacity of around 1000 mm3 g-1 in porosity.

"Click" Silica-Supported Sulfonic Acid Catalysts with Variable Acid Strength and Surface Polarity.

Solid acid catalysts are central in our chemical industry and are major players in the valorization of bioresources. However, there is still a need to develop solid acid catalysts with enhanced acid strength and improved, or tunable, physicochemical profile to enhance the efficiency and sustainability of chemical processes. Here, a modular approach to tune the acid strength and surface polarity of silica-supported sulfonic acid catalysts, based on a versatile copper-catalyzed azide-alkyne cycloaddition (CuAAC)-based anchoring scheme, is presented. The CuAAC-formed triazole link was used to enhance the activity of the grafted sulfonic acids and to pair the acid sites with secondary hydrophobic functions. The beneficial effects of both the triazolium link and the paired hydrophobic site, as well as the optimal positioning of the sulfonic moiety on the triazole ring, are discussed in model esterification reactions.

Solid-state NMR tools for the structural characterization of POSiSils: 29 Si sensitivity improvement with MC-CP and 2D 29 Si-29 Si DQ-SQ at natural abundance.

The 1 H-29 Si multiple-contact cross polarization (MC-CP) MAS NMR experiment is evaluated for the class of silicate-siloxane copolymers called POSiSils, that is, polyoligosiloxysilicones. It proves a reasonably good solution to tackle the challenge of recording quantitative 29 Si NMR data in experimental time much reduced compared with single pulse acquisition. In a second time, we report 29 Si-29 Si MC-CP double-quantum single-quantum (MC-CP-DQ-SQ) NMR experiment, which provides information about the through-space proximities between all silicon species despite the high degree of heterogeneity of this material. This work furthers the NMR tools for NMR crystallography for inorganic polymers, as it covers flexible polymers with different dimensionalities and long or heterogeneous relaxation characteristics at low 29 Si natural abundance.

Low-cost disposable high-pressure setup for in situ X-ray experiments.

A low-cost, flexible and fast method to create disposable sample cells suitable for in situ catalytic or material synthesis studies based on standard quartz capillaries, heat-shrinkable tubing and standard Swagelok components is described.

Interfacial Water Drives Improved Proton Transport in Siliceous Nanocomposite Nafion Thin Films.

Nafion proton exchange membranes dehydrate when they are used in the gas phase and in high-temperature applications, such as fuel cells and (photo)electrolysis. Retaining a high level of membrane hydration under such conditions can be achieved by using inorganic fillers, but has never been demonstrated for thin films. Herein, several types of siliceous nanoparticles were incorporated for the first time into Nafion thin films. For composite Nafion materials, increased water uptake does not always induce increased proton conductivity. Here, increased water uptake did result in higher proton conductivity due to a synergistic effect within the composite film. The nanocomposites displayed a higher water uptake than could be expected based on the water uptake of the individual materials. Excess water present at the Nafion-filler interface was found to cause the proton conductivity of nanocomposite Nafion/Ludox AS-40 thin films to double compared with pristine Nafion at low relative humidity (from 2 to 4 mS cm-2 ). Knowledge about the properties of such interfaces will allow for the better design of self-humidifying nanocomposite Nafion membranes, films, and catalyst layers.