The Role of the Anion in Imidazolium-Based Ionic Liquids for Fuel and Terpenes Processing.

The potentialities of methylimidazolium-based ionic liquids (ILs) as solvents were evaluated for some relevant separation problems-terpene fractionation and fuel processing-studying selectivities, capacities, and solvent performance indices. The activity coefficients at infinite dilution of the solute (1) in the IL (3), γ13∞, of 52 organic solutes were measured by inverse gas chromatography over a temperature range of 333.2-453.2 K. The selected ILs are 1-butyl-3-methylimidazolium hexafluorophosphate, [C4mim][PF6], and the equimolar mixture of [C4mim][PF6] and 1-butyl-3-methylimidazolium chloride, [C4mim]Cl. Generally, low polar solutes follow γ1,C4mimCl∞ > γ1,C4mimPF6+C4mimCl∞ > γ1,C4mimPF6∞ while the opposite behavior is observed for alcohols and water. For citrus essential oil deterpenation, the results suggest that cations with long alkyl chains, such as C12mim+, promote capacity, while selectivity depends on the solute polarity. Promising results were obtained for the separation of several model mixtures relevant to fuel industries using the equimolar mixture of [C4mim][PF6] and [C4mim]Cl. This work demonstrates the importance of tailoring the polarity of the solvents, suggesting the use of ILs with mixed anions as alternative solvents for the removal of aliphatic hydrocarbons and contaminants from fuels.

Extensive characterization of choline chloride and its solid-liquid equilibrium with water.

The importance of choline chloride (ChCl) is recognized due to its widespread use in the formulation of deep eutectic solvents. The controlled addition of water in deep eutectic solvents has been proposed to overcome some of the major drawbacks of these solvents, namely their high hygroscopicities and viscosities. Recently, aqueous solutions of ChCl at specific mole ratios have been presented as a novel, low viscous deep eutectic solvent. Nevertheless, these proposals are suggested without any information about the solid-liquid phase diagram of this system or the deviations from the thermodynamic ideality of its precursors. This work contributes significantly to this matter as the phase behavior of pure ChCl and (ChCl + H2O) binary mixtures was investigated by calorimetric and analytical techniques. The thermal behavior and stability of ChCl were studied by polarized light optical microscopy and differential scanning calorimetry, confirming the existence of a solid-solid transition at 352.2 ± 0.6 K. Additionally, heat capacity measurements of pure ChCl (covering both ChCl solid phases) and aqueous solutions of ChCl (xChCl < 0.4) were performed using a heat-flow differential scanning microcalorimeter or a high-precision heat capacity drop calorimeter, allowing the estimation of a heat capacity change of (ChCl) ≈ 39.3 ± 10 J K-1 mol-1, between the hypothetical liquid and the observed crystalline phase at 298.15 K. The solid-liquid phase diagram of the ChCl + water mixture was investigated in the whole concentration range by differential scanning calorimetry and the analytical shake-flask method. The phase diagram obtained for the mixture shows an eutectic temperature of 204 K, at a mole fraction of choline chloride close to xChCl = 0.2, and a shift of the solid-solid transition of ChCl-water mixtures of 10 K below the value observed for pure choline chloride, suggesting the appearance of a new crystalline structure of ChCl in the presence of water, as confirmed by X-ray diffraction. The liquid phase presents significant negative deviations to ideality for water while COSMO-RS predicts a near ideal behaviour for ChCl.

Differences on the impact of water on the deep eutectic solvents betaine/urea and choline/urea.

The differences on the impact of water on the intermolecular interactions present in the deep eutectic solvents betaine/urea and choline/urea are investigated in this work by measuring the solid-liquid phase diagrams of these mixtures with different amounts of added water. These data are analyzed in terms of ternary systems, rather than the usual pseudo-binary approach, and are used to calculate activity coefficients, which provide precious insight into how water affects the interactions of these systems. It is found that the addition of water greatly enhances the intermolecular interactions of betaine/urea near its eutectic composition, hinting at the formation of a 1:1:1 betaine/urea/water aggregate. On the other hand and contrary to what is commonly believed, water has an asymmetric impact on the interactions present in the choline/urea system. The addition of water to choline-rich mixtures leads to weaker interactions, whereas its addition to urea-rich mixtures leads to stronger interactions. This shows that the decrease in the melting temperature of choline/urea mixtures due to the presence of water does not necessarily mean that intermolecular interactions are strengthened. Finally, a minimum in the activity coefficient of urea in the choline/urea system with 2 wt. % of water was found, which coincides with several anomalies in the properties of this system previously reported in the literature.

What a difference a methyl group makes - probing choline-urea molecular interactions through urea structure modification.

There is a lack of fundamental knowledge on deep eutectic solvents, even for the most extensively studied mixtures, such as the mixture of cholinium chloride and urea, which prevents a judicious choice of components to prepare new solvents. The objective of this work is to study and understand the fundamental interactions between cholinium chloride and urea that lead to the experimentally observed melting temperature depression. To do so, the structure of urea was strategically and progressively modified, in order to block certain interaction centres, and the solid-liquid equilibrium data of each new binary system was experimentally measured. Using this approach, it was concluded that the most important interaction between cholinium chloride and urea occurs through hydrogen bonding between the chloride anion and the amine groups. Any blockage of these groups severely hampers the melting point depression effect. Raman spectroscopy and DFT calculations were utilized to study in more detail this hydrogen bonding and its nuances.

Surface crystallization of ionic liquid crystals.

The evidence for surface crystallization in ionic liquids is scarce. The existing reports seem to be contradictory as for its driving forces, since in the two compounds investigated in the literature, the contribution of coloumbic and van der Waals forces is very different. In this work 1-dodecyl-3-methylimidazolium tetrafluoroborate was studied and its surface crystallization characterized by surface tension, ellipsometry and optical microscopy. The results obtained seem to reconcile previous observations, and it was further shown, using the same techniques, that this phenomenon is prevalent in other ionic liquids. MD simulation results illustrate the different possibilities of organization, providing reasonable models to rationalize the experimental observations.

The Role of Charge Transfer in the Formation of Type I Deep Eutectic Solvent-Analogous Ionic Liquid Mixtures.

It was recently shown that tetramethylammonium chloride presented negative deviations to ideality when mixed with tetraethylammonium chloride or tetrapropylammonium chloride, leading to a strong decrease of the melting points of these salt mixtures, in a behavior akin to that observed in the formation of deep eutectic solvents. To better rationalize this unexpected melting point depression between two structurally similar compounds devoid of dominant hydrogen bonding capability, new solid-liquid equilibria data for tetramethylammonium-based systems were measured and analyzed in this work. Molecular dynamics was used to show that the strong negative deviations from ideality presented by these systems arise from a synergetic share of the chloride ions. A transfer of chloride ions seems to occur from the bigger cation in the mixture (which possesses a more disperse charge) to the smaller cation (tetramethylammonium), resembling the formation of metal-chloride complexes in type I deep eutectic solvents. This rearrangement of the charged species leads to an energetic stabilization of both components in the mixture, inducing the negative deviations to the ideality observed. The conclusions presented herein emphasize the often-neglected contribution of charge delocalization in deep eutectic solvents formation and its applicability toward the design of new ionic liquid mixtures.

Densities, Viscosities and Derived Thermophysical Properties of Water-Saturated Imidazolium-Based Ionic Liquids.

In order to evaluate the impact of the alkyl side chain length and symmetry of the cation on the thermophysical properties of water-saturated ionic liquids (ILs), densities and viscosities as a function of temperature were measured at atmospheric pressure and in the (298.15 to 363.15) K temperature range, for systems containing two series of bis(trifluoromethylsulfonyl)imide-based compounds: the symmetric [C n C n im][NTf2] (with n = 1-8 and 10) and asymmetric [C n C1im][NTf2] (with n = 2-5, 7, 9 and 11) ILs. For water-saturated ILs, the density decreases with the increase of the alkyl side chain length while the viscosity increases with the size of the aliphatic tails. The saturation water solubility in each IL was further estimated with a reasonable agreement based on the densities of water-saturated ILs, further confirming that for the ILs investigated the volumetric mixing properties of ILs and water follow a near ideal behaviour. The water-saturated symmetric ILs generally present lower densities and viscosities than their asymmetric counterparts. From the experimental data, the isobaric thermal expansion coefficient and energy barrier were also estimated. A close correlation between the difference in the energy barrier values between the water-saturated and pure ILs and the water content in each IL was found, supporting that the decrease in the viscosity of ILs in presence of water is directly related with the decrease of the energy barrier.

Unveiling Dissolution Kinetics of CuO Nanofertilizer Using Bio-Based Ionic Liquids Envisaging Controlled Use Efficiency for Sustainable Agriculture.

The need for sustainable agriculture amid a growing population and challenging climatic conditions is hindered by the environmental repercussions of widespread fertilizer use, resulting in the accumulation of metal ions and the loss of micronutrients. The present study provides an approach to improve the efficiency of nanofertilizers by controlling the release of copper (Cu) ions from copper oxide (CuO) nanofertilizers through bioionic liquids based on plant growth regulators (PGR-ILs). A 7-day study was conducted to understand the kinetics of Cu ion release in aqueous solution of five different PGR-ILs, with choline ascorbate ([Cho][Asc]) or choline salicylate ([Cho][Sal]) leading to 200- to 700-fold higher dissolution of Cu ions in comparison to choline indole-3-acetate ([Cho][IAA]), choline indole-3-butyrate ([Cho][IBA]), and choline gibberellate ([Cho][GA3]). The tunable diffusion of Cu ions from CuO nanofertilizers using PGR-ILs is then applied in a foliar spray study, evaluating its impact on the growth phenotype, photosynthetic parameters, and carbon dioxide (CO2) sequestration in Nicotiana tabacum in a greenhouse. The results indicate that nanoformulations with lower concentrations of Cu ions in PGR-IL solutions exhibit superior outcomes in terms of plant length, net photosynthetic rate, dry biomass yield, and CO2 sequestration, emphasizing the critical role of dissolution kinetics in determining the effectiveness of PGR-IL-based nanoformulations for sustainable agriculture.

Imidazolium Chloride Ionic Liquid Mixtures as Separating Agents: Fuel Processing and Azeotrope Breaking.

Relevant chemical separations for the petrochemical and chemical industries include the removal of aromatic hydrocarbons from aliphatics, the desulfurization and denitrification of fuels, and the separation of azeotropic mixtures containing alkanols. In an attempt to contribute to the development of novel technologies, the potentialities of imidazolium chloride ionic liquid (IL) mixtures as separation agents were investigated. Selectivities, capacities, and solvent performance indices were calculated through the activity coefficients at infinite dilution of organic solutes and water in the imidazolium chloride IL: [C8mim]Cl, [C12mim]Cl, and the equimolar mixture of [C4mim]Cl and [C12mim]Cl. Results show that the imidazolium chloride IL might be appropriately tailored for specific purposes, in which an increase in the proportion of cations containing larger alkyl chains tends to increase the overall affinity with organic solutes. The IL designer solvent concept was explored by comparing the IL equimolar mixture results with the intermediary [C8mim]Cl. The COSMO-RS thermodynamic model was also applied, showing it to be a promising tool for a fast qualitative screening of potential separation agents for specific separation processes.

The role of ionic vs. non-ionic excipients in APIs-based eutectic systems.

Aiming to contribute to drug pre-formulation, new eutectic mixtures were developed. Thymol, coumarin, or quaternary ammonium chlorides as excipients, were combined with the active pharmaceutical ingredients (APIs) acetylsalicylic acid, acetaminophen, ibuprofen, ketoprofen, or lidocaine. Their solid-liquid equilibrium (SLE) binary phase diagrams were measured to study eventual phase separation between the compounds, preventing manufacturing problems, and to study the molecular interactions between the APIs and ionic or non-ionic excipients. The Conductor-like Screening Model for Real Solvents (COSMO-RS) capability to predict the SLE of mixtures containing non-ionic excipients was further evaluated. COSMO-RS gives a good quantitative description of the experimental SLE being a tool with great potential in the screening of eutectic systems containing APIs and non-ionic excipients. While thymol presents strong interactions with the APIs, and consequently negative deviations to thermodynamic ideality, systems containing coumarin follow a quasi-ideal behavior. Regarding the ionic excipients, both choline chloride and the tetraalkylammonium chlorides are unable to establish relevant interactions with the APIs, and no significant negative deviations to ideality are observed. The liquefaction of the APIs here studied is favored by using non-ionic excipients, such as thymol, due to the strong interactions it can establish with the APIs.

Understanding the Formation of Deep Eutectic Solvents: Betaine as a Universal Hydrogen Bond Acceptor.

The mechanism of formation of betaine-based deep eutectic solvents (DES) is presented for the first time. Due to its polarity unbalance, it was found that betaine displays strong negative deviations from ideality when mixed with a variety of different organic substances. These results pave the way for a comprehensive design of novel deep eutectic solvents. A connection to biologically relevant systems was made using betaine (osmolyte) and urea (protein denaturant), showing that these two compounds formed a DES, the molecular interactions of which were greatly enhanced in the presence of water.

Liquefying Compounds by Forming Deep Eutectic Solvents: A Case Study for Organic Acids and Alcohols.

The criterion to distinguish a simple eutectic mixture from a deep eutectic solvent (DES) lies in the deviations to thermodynamic ideality presented by the components in the system. In this work, the current knowledge of the molecular interactions in types III and V DES is explored to liquefy a set of three fatty acids and three fatty alcohols, here used as model compounds for carboxyl and hydroxyl containing solid compounds. This work shows that thymol, a stronger than usual hydrogen bond donor, is able to form deep eutectic solvents of type V with the fatty alcohols studied. This is particularly interesting, since these DES formed are hydrophobic. Regarding type III DES, the results suggest that the prototypical DES hydrogen bond acceptor, cholinium chloride, is unable to induce negative deviations to ideality in the model molecules studied. By substituting choline with tetramethylammonium chloride, it is shown that the choline hydroxyl group is responsible for the difficulty in forming choline-based deep eutectic solvents and that its absence induces strong negative deviations to ideality in the alkylammonium side. Finally, it is demonstrated that tetrabutylammonium chloride acts as a chloride donning agent, causing significant negative deviations to ideality in both fatty acids and alcohols and leading to the formation of deep eutectic solvents of type III.

Solid-Liquid Equilibria for Hexafluorophosphate-Based Ionic Liquid Quaternary Mixtures and Their Corresponding Subsystems.

The present work describes an experimental study and the thermodynamic modeling for the solid-liquid phase diagram of an ionic liquid quaternary system constituted by hexafluorophosphate ([PF6]-) as the common anion and by 1-methyl-3-propylimidazolium ([C3mim]+), 1-methyl-1-propylpyrrolidinium ([C3mpyrr]+), 1-methyl-3-propylpyridinium ([C3mpy]+), or 1-methyl-1-propylpiperidinium ([C3mpip]+) as the cations. The Modified Quasichemical Model was used to model the liquid solution, and the Compound Energy Formalism was used for the relevant solid solutions. The liquidus projections of the four ternary subsystems (1) [C3mim][PF6]-[C3mpip][PF6]-[C3mpyrr][PF6], (2) [C3mpy][PF6]-[C3mpip][PF6]-[C3mpyrr][PF6], (3) [C3mpip][PF6]-[C3mpy][PF6]-[C3mim][PF6], and (4) [C3mpyrr][PF6]-[C3mpy][PF6]-[C3mim][PF6] were predicted using a standard symmetric (for systems 3 and 4) or asymmetric (for systems 1 and 2) interpolation method. In order to test the accuracy of the thermodynamic model, two isoplethal sections were experimentally measured in each of the four ternary systems using differential scanning calorimetry. Overall, agreement was very satisfactory, not requiring fitting of any ternary interaction parameters for the liquid solution model. In each of the four calculated ternary liquidus projections, the region of composition corresponding to room temperature ionic liquid mixtures was determined. The global minimum of the liquidus temperature in the complete composition space was calculated to be about -16 °C, with a mole percentage composition of (33.8% [C3mpyrr][PF6] + 33.9% [C3mpy][PF6] + 32.3% [C3mim][PF6]).

Phenolic hydrogen bond donors in the formation of non-ionic deep eutectic solvents: the quest for type V DES.

Mixtures of non-ionic compounds have been reported as DES but most are just ideal mixtures. In the thymol-menthol system, an abnormal strong interaction was identified stemming from the acidity difference of the phenolic and aliphatic hydroxyl groups. This type of interaction is found to be the key to prepare non-ionic DES, that may be classified as type V.

Sustainable hydrophobic terpene-based eutectic solvents for the extraction and separation of metals.

Sustainable hydrophobic eutectic solvents, composed of low-priced and biodegradable terpenes and fatty acids, were used for the extraction and separation of Cu(ii) from other transition metals in mildly acidic solutions. Multiple parameters were evaluated for metal extraction and the hydrophobic eutectic solvent was successfully recovered and reused.

Aqueous solubilities of five N-(diethylaminothiocarbonyl)benzimido derivatives at T = 298.15 K.

N-(diethylaminothiocarbonyl)benzimido derivatives are polar multifunctional substances. A set of these compounds was synthesised by successive substitution on the enamine side, resulting in similar substances with different polarities, providing a set of model compounds with respect to the study of substituent effects on physico-chemical properties. Experimental aqueous solubility data, at T = 298.15 K, of N-(diethylaminothiocarbonyl)benzamidine, PhCNH2NCSNEt2 (1),N-(diethylaminothiocarbonyl)-N'-phenylbenzamidine, PhCNHPhNCSNEt2 (2), N-(diethylaminothiocarbonyl)-N'-monoethylbenzamidine, PhCNHEtNCSNEt2 (3), N-(diethylaminothiocarbonyl)-N',N'-diethylbenzamidine, PhCNEt2NCSNEt2 (4), and N-(diethylaminothiocarbonyl)benzimido ethylester, PhCOEtNCSNEt2 (5) were measured at T = 298.15 K. The obtained data are supplemented by COSMO-RS aqueous solubility predictions as well as other environmentally important partition coefficients. This information is shown in a two-dimensional chemical space diagram, providing indications about the compartment into which the bulk of the compounds is likely to concentrate. The expected quality of COSMO-RS predictions for this type of screening exercise is illustrated on a set of pesticides with established thermophysical property data.