Assessing Contributions of Synthetic Musk Compounds from Wastewater Treatment Plants to Atmospheric and Aquatic Environments.

The high environmental concentrations, persistence, and toxicity of synthetic musk compounds (SMCs) necessitate a better grasp of their fate in wastewater treatment plants (WWTPs). To investigate the importance of WWTPs as pathways of SMCs to the environment, air and wastewater samples were collected at four WWTPs in Ontario, Canada. Polycyclic musks (PCMs) were present at higher concentrations than nitro musks (NMs) and macrocyclic musks (MCMs). Three PCMs [galaxolide (HHCB), tonalide (AHTN), and iso-E super (OTNE)] were the most abundant compounds (0.30-680 ng/m3 in air, 0.40-15 µg/L in influent, and 0.007-6.0 µg/L in effluent). Analyses of multiyear data suggest that risk management measures put in place have been effective in reducing the release of many SMCs into the environment. The highest removal efficiency, up to almost 100% of some SMCs, was observed for the plant with the longest solid retention time. A fugacity-based model was established to simulate the transport and fate of SMCs in the WWTP, and good agreement was obtained between the measured and modeled values. These findings indicate that the levels of certain SMCs discharged into the atmospheric and aquatic environments were substantial, potentially resulting in exposure to both humans and wildlife.

A review of 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane in the environment and assessment of its persistence, bioaccumulation and toxicity.

Following the ban of many historically-used flame retardants (FRs), numerous replacement chemicals have been produced and used in products, with some being identified as environmental contaminants. One of these replacement flame retardants is 1,2-dibromo-4-(1,2-dibromoethyl)-cyclohexane (DBE-DBCH; formerly abbreviated as TBECH), which to date has not been identified for risk assessment and potential regulation. DBE-DBCH technical mixtures consist largely of α- and ß-diastereomers with trace amounts of γ- and δ-DBE-DBCH. The α- and ß-isomers are known contaminants in various environmental media. While current global use and production volumes of DBE-DBCH are unknown, recent studies identified that DBE-DBCH concentrations were among the highest of the measured bromine-based FRs in indoor and urban air in Europe. Yet our mass balance fugacity model and modeling of the physical-chemical properties of DBE-DBCH estimated only 1% partitioning to air with a half-life of 2.2 d atmospherically. In contrast, our modeling characterized DBE-DBCH adsorbing strongly to suspended particulates in the water column (~12%), settling onto sediment (2.5%) with minimal volatilization, but with most partitioning and adsorbing strongly to soil (~85%) with negligible volatilization and slow biodegradation. Our modeling further predicted that organisms would be exposed to DBE-DBCH through partitioning from the dissolved aquatic phase, soil, and by diet, and given its estimated logKow (5.24) and a half-life of 1.7 d in fish, DBE-DBCH is expected to bioaccumulate into lipophilic tissues. Low concentrations of DBE-DBCH are commonly measured in biota and humans, possibly because evidence suggests rapid metabolism. Yet toxicological effects are evident at low exposure concentrations: DBE-DBCH is a proven endocrine disruptor of sex and thyroid hormone pathways, with in vivo toxic effects on reproductive, metabolic, and other endpoints. The objectives of this review are to identify the current state of knowledge concerning DBE-DBCH through an evaluation of its persistence, potential for bioaccumulation, and characterization of its toxicity, while identifying areas for future research.

Validation of a simultaneous method for determining polycyclic aromatic compounds and alkylated isomers in biota.

RATIONALE: There is a need for a validated method to improve detection limits and simultaneously quantify polycyclic aromatic compounds (PACs, both parent and alkylated homologues) in biota by gas chromatography/tandem mass spectrometry because of their environmental significance. The validation of the method was performed in accordance to the Eurachem Guide to Quality in Analytical Chemistry. METHODS: Gas chromatography coupled with a triple quadrupole mass spectrometer used in multiple reaction monitoring (MRM) mode was used for detection and quantification. Retention time windows and selective MRM ion transitions were optimized for a suite of PACs. The developed method was validated by comparing our measurements made on a reference material of freeze-dried mussel tissue (Mytilus edulis) with the certified values. RESULTS: Linearity was observed between 10-1000 pg/µL (PAHs) and 2-500 pg/µL (alkyl-PACs including S-based PACs). The overall mean (±SD) for the limits of detection of 43 PACs studied were 0.305 ± 0.276 and 2.69 ± 1.10 ng/g, respectively. For the 14 certified target analytes, the percent relative error ranged from 1.3 to 33%. With the exception of benzo(a)pyrene, the between-day and within-day repeatability for all target analytes was lower than 15% RSD. CONCLUSIONS: This is the first report of a fully validated method to simultaneously quantify PACs in biota performed in an ISO accredited laboratory.

Heterocyclic Aromatics in Petroleum Coke, Snow, Lake Sediments, and Air Samples from the Athabasca Oil Sands Region.

The aromatic fractions of snow, lake sediment, and air samples collected during 2011-2014 in the Athabasca oil sands region were analyzed using two-dimensional gas chromatography following a nontargeted approach. Commonly monitored aromatics (parent and alkylated-polycyclic aromatic hydrocarbons and dibenzothiophenes) were excluded from the analysis, focusing mainly on other heterocyclic aromatics. The unknowns detected were classified into isomeric groups and tentatively identified using mass spectral libraries. Relative concentrations of heterocyclic aromatics were estimated and were found to decrease with distance from a reference site near the center of the developments and with increasing depth of sediments. The same heterocyclic aromatics identified in snow, lake sediments, and air were observed in extracts of delayed petroleum coke, with similar distributions. This suggests that petroleum coke particles are a potential source of heterocyclic aromatics to the local environment, but other oil sands sources must also be considered. Although the signals of these heterocyclic aromatics diminished with distance, some were detected at large distances (>100 km) in snow and surface lake sediments, suggesting that the impact of industry can extend >50 km. The list of heterocyclic aromatics and the mass spectral library generated in this study can be used for future source apportionment studies.

Occurrence and Distribution of Carbamate Pesticides and Metalaxyl in Southern Ontario Surface Waters 2007-2010.

Surface water sampling in 2007-2010 measured the occurrence of carbamates and metalaxyl during base flow conditions and wet weather events in southern Ontario surface waters. Carbaryl, metalaxyl and pirimicarb were the most frequently detected compounds. In 2008 these three compounds were detected in over 50 % of the samples. Overall mean concentrations of carbaryl and metalaxyl over the course of the study (2007-2010) were 15 and 18 ng/L, respectively. Elevated concentrations of carbaryl (~100 to ~950 ng/L) appeared associated with wet weather (high flow) events, while highest concentrations of metalaxyl (~20-1330 ng/L) were correlated with base flow conditions. We attributed these observations as the result of runoff of carbaryl from the watershed during rain events, while metalaxyl contamination may have resulted primarily from spray drift.

Identification and occurrence of analogues of dechlorane 604 in Lake Ontario sediment and their accumulation in fish.

The dechlorane family of flame retardants, which includes Mirex (also known as Dechlorane), Dechlorane Plus (DP), and Dechloranes (Dec) 602, 603, and 604, were manufactured at a facility along the Niagara River, upstream of Lake Ontario. Some of these compounds remain in use. In a previous study, we found Mirex and Dec602 to have greater bioaccumulation potentials than Dec604 and DP based on calculated biota-sediment accumulation factors (BSAFs). In this study, analogues of Dec604, containing fewer bromines and mixed substitutions of bromine and chlorine, were identified in Lake Ontario sediment and fish using high and ultrahigh resolution mass spectrometric techniques. The tribromo-Dec604 (Br3Dec604) analogue, known as Dechlorane 604 Component B (Dec604 CB), was present in lake trout and whitefish at concentrations of 10-60 ng/g lipid weight, approximately 50-200 times greater than concentrations measured for Dec604. In addition, BrDec604 and Br2Dec604 analogues, and mixed Br2Cl2Dec604, Br3ClDec604, Br2ClDec604, and BrCl2Dec604 analogues were also present. We have shown that solutions of Dec604 and Dec604 CB exposed to UV-light undergo photodebromination and give rise to the analogues found in sediment and fish. Dec604 CB and other lesser halogenated analogues of Dec604 show greater bioaccumulation potentials than Dec604, Dec602 and DP, based on BSAFs, which highlight the need to consider likely impurities and degradation products in the assessment of persistent, bioaccumulative, and toxic compounds.

A validated approach for analysis of heterocyclic aromatic compounds in sediment samples.

The scientific literature is replete with analytical methods for the analysis of homocyclic aromatic compounds especially polycyclic aromatic hydrocarbons and their alkylated analogs. However, there is a paucity of methods for the analysis of nitrogen-, sulfur- and oxygen-containing polycyclic aromatic compounds (PACs). The lack of commercially available analytical standards, the presence of many structural derivatives and isomers and lack of certified reference materials all contribute to the inherent challenges in measuring these compounds. Gas chromatography coupled with a tandem mass spectrometer was used to develop two multiple reaction monitoring methods to detect and quantify fifty-three non-halogenated and halogenated hetero-polycyclic aromatic compounds (HPACs). Because of their greater polarity, strongly non-polar solvents typically employed to extract homocyclic PACs from sediment samples did not yield acceptable recoveries of our target analytes. By adding ethyl acetate to dichloromethane (50:50), recoveries of our target analytes using accelerated solvent extraction increased markedly. The performance characteristics of the validated method including accuracy [> than 67% for 46 (out of 53) analytes], inter- and intra-day precision [<30% for all analytes, (expressed as relative standard deviation)], limits of detection (0.1 to 2.3 ng/g) and quantitation (1.5 to 7.6 ng/g) imply that the method is fit for its intended purpose. A sediment sample from a known contaminated site in Canada was analyzed for both homo- and hetero-PACs. Measured concentrations of Σ27HPAC (7.3 µg/g, dry weight) were significantly smaller (p<0.05) than Σ16PAHs (80.9 µg/g, dry weight) and Σ30Alkylated-PAHs (14.2 µg/g, dry weight). These results suggest that the developed method is an effective and efficient approach for the targeted analysis of HPACs and their halogenated derivatives in sediment samples.

Microbead beating extraction of avian eggs for polycyclic aromatic compounds.

Due to their relatively high trophic position and importance as a food source for many communities in the circumpolar north, seabird eggs are an important matrix for monitoring contaminant levels. In fact, many countries, including Canada, have established long-term seabird egg contaminant monitoring programs, with oil related compounds a contaminant of emerging concern for seabirds in several regions. Current approaches to measuring many contaminant burdens in seabird eggs are time-consuming and often require large volumes of solvent. Here we propose an alternative approach, based on the principle of microbead beating tissue extraction using custom designed stainless-steel extraction tubes and lids, to measure a suite of 75 polycyclic aromatic compounds (polycyclic aromatic hydrocarbons (PAHs), alkyl-PAHs, halogenated-PAHs and some heterocyclic compounds) comprising a wide-range of chemical properties. Our method was conducted in strict accordance with ISO/IEC 17025 guidelines for method validation. Accuracies for our analytes generally ranged from 70 - 120%, and intra and inter-day repeatability for most analytes were < 30%. Limits of detection/quantitation for the 75 target analytes were < 0.2/0.6 ng g-1. The level of contamination in our method blanks was significantly smaller in our stainless-steel tubes/lids relative to commercially available high-density plastic alternatives. Overall, our method meets our data quality objectives and results in a notable reduction in sample processing times relative to current approaches.

Identification and determination of the dechlorination products of Dechlorane 602 in Great Lakes fish and Arctic beluga whales by gas chromatography-high resolution mass spectrometry.

During the course of our studies of in-use chlorinated flame retardants, such as Dechlorane Plus(®) and Dechloranes 602 and 604, blubber of beluga whales from the Canadian Arctic and lake trout and whitefish from the North American Great Lakes were found to contain two novel dechlorination products of Dechlorane 602 (Dec602). The structures of these compounds were characterized by experiments performed using both gas chromatography-high resolution mass spectrometry and Fourier transform mass spectrometry with a prepared technical mixture of monohydro and dihydroDec602 derivatives. These Dec602 derivatives are analogous to the well-known monohydro and dihydro photochemical degradation products of Mirex. The ratio of the two monohydroDec602 diastereomers varied between Lake Ontario fish and those from the upper lakes, but only one isomer was found in Arctic beluga, indicating that one isomer is either more stable or more bioaccumulative. Dechlorane Plus(®), Dec603, and Dec 604 were not detected in Arctic beluga, but Dec602 and its monohydroDec602 derivative were measured in approximately equal concentrations, ranging from 25 to 300 pg/g lipid. In Great Lakes fish, concentrations of the monohydroDec602 derivatives were also close to those of Dec602, ranging from 2 to 67 ng/g lipid and were greatest in Lake Ontario. This study reports on the first measurements of dechlorane-related compounds in Arctic biota and the first detection of monohydroDec602 degradation products and their accumulation in biota.

Factors driving the spatial distribution of microplastics in nearshore and offshore sediment of Lake Huron, North America.

Offshore and nearshore sediment samples from Lake Huron, North America, were analysed for microplastics. Normalized abundances ranged from 59 to 335,714 particles per kg of dry weight sediment (p kg-1 dw). Of the four main basins of Lake Huron, the North Channel contained the greatest microplastic abundances, averaging 47,398 p kg-1 dw, followed by Georgian Bay (21,390 p kg-1 dw), the main basin (15,910 p kg-1 dw) and Saginaw Bay (1592 p kg-1 dw). Results indicate that greater lake depths (p = 0.004), associated with finer grained sediment (p = 0.048), are significant zones of deposition. Regression analysis reveals that source-driven factors generally do not account for microplastic abundances and distribution. Instead, process-driven hydrodynamic forces such as waves and surface currents could be driving distribution and deposition into the offshore environment. The findings suggest that these often overlooked processes should be considered when investigating microplastics quantity in bottom sediment of large lakes.

Kynurenine to tryptophan ratio as a biomarker of acute stress in fish.

The aim of this study was to determine the kynurenine (KYN) to tryptophan (TRP) ratio (KTR) in fish tissue to assess its usefulness as a biomarker of acute stress. Laboratory held rainbow trout (Oncorhynchus mykiss) were subjected to an acute stressor and KYN, TRP and cortisol were measured in liver and brain tissues at 4- and 48-h post-stress. The analytical method used to determine our analytes was based on lyophilization, and liquid-solid extraction followed by isotope dilution high-performance liquid chromatography positive ion electrospray tandem mass spectrometry. The [KYN]/[TRP] ratio (KTR) was greater in fish liver and brain in the 48-h post-stress exposure group (n = 8) relative to controls (n = 8, p < 0.05); a similar increase was not observed in fish in the 4-h post-stress exposure group. Hepatic and brain cortisol levels were also elevated in fish from both stress-induced groups relative to their respective controls implying that cortisol responded more quickly to the stressful stimulus than KYN and TRP. Our results suggest that the KTR is a promising acute stress diagnostic biomarker in fish. Efforts are ongoing to assess whether the KTR can be used as a biomarker for chronic stress in fish exposed to aquatic contaminants and other environmental stressors and if similar assessments can be made on tissues collected via non-lethal approaches.

Liquid chromatography/tandem mass spectrometry for analysis of 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH) and 1,2,5,6-tetrabromocyclooctane (TBCO).

Although the two flame retardants 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH) and 1,2,5,6-tetrabromocyclooctane (TBCO) have been widely used, a selective instrumental method of analysis for these compounds has not been developed to date. In this study, we demonstrate the feasibility to utilize liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the separation and analysis of α- and ß-TBCO and α-, ß-, γ-, and δ-TBECH. Acetone was initially used in a tetrahedron solvent system for LC optimization. A simple isocratic elution allowed near-baseline separation of these compounds. Different ionization approaches and mechanisms were investigated. The mass spectrometric transition of [M + O(2)](-) => Br(-) (459.8 => 78.9) was a selective detection method for the target analytes. Good instrument detection limits (5 pg for γ-/δ-TBECH, 125 pg for α-/ß-TBECH, and 30 pg for α-/ß-TBCO with 2.0 µL injection) were obtained. Excellent linearity up to 50 ng/µL (R(2) >0.999) was also achieved. This method has been applied to environmental samples (surface water) for screening purposes with recoveries ranging from 76-92% (CV%: 5-8%). This method shows significant improvement over previous methods.

Liquid chromatography/atmospheric pressure photoionization tandem mass spectrometry for analysis of Dechloranes.

Liquid chromatography/atmospheric pressure photoionization tandem mass spectrometry (LC/APPI-MS/MS) was investigated as an instrumental method for the analysis of the halogenated norbornene flame retardants, Mirex, Dechloranes 602, 603, 604, and Dechlorane Plus (DP). The LC separation was optimized by screening a variety of stationary and mobile phases, resulting in a short LC separation time of 5 min. Different atmospheric pressure ionization approaches were examined including electrospray ionization, atmospheric pressure chemical ionization, and APPI, each with and without post-column addition. APPI without post-column addition was chosen for providing the best ionization response. The optimized LC/APPI-MS/MS approach resulted in instrument detection limits ranging between 25 and 50 pg. Good linearity was also achieved (up to 25.0 ng/µL; R >0.999). The method was applied to extracts of environmental samples including surface water, fish and sediments for screening purposes, and the results agreed well with those obtained by gas chromatography/mass spectrometry.

Dechloranes 602, 603, 604, Dechlorane Plus, and Chlordene Plus, a newly detected analogue, in tributary sediments of the Laurentian Great Lakes.

A chlorinated compound (Chlordene Plus, CP), structurally related to Dechloranes (Dec) 602, 603, 604, and Dechlorane Plus (DP), was identified, and concentrations and spatial trends of Dec 602, 603, 604, CP, and DP in tributary sediments of the Laurentian Great Lakes are reported. The dechloranes were widely detected with their concentrations varying considerably across the Great Lakes basin. Spatial trends of Dec 602, 604, and DP in Canadian tributary sediments were similar to that of BDE 209, which suggested these flame retardant chemicals in tributaries were associated with industrial and urban areas. The highest concentrations of Dec 602, 604, and DP observed in tributaries of the Niagara River confirmed that past or ongoing manufacturing of these compounds at plants along the river were important sources to Lake Ontario. Dec 603 was detected in technical products of aldrin and dieldrin, and its spatial trend was consistent with historic pesticide usage. Similarly, CP was detected in technical products of chlordene and chlordane, and it was found in higher concentrations in sediments near urban areas, possibly related to past chlordane use in home termite control.

Historic trends of dechloranes 602, 603, 604, dechlorane plus and other norbornene derivatives and their bioaccumulation potential in lake ontario.

Temporal trends and seasonal variation of Dechloranes (Dec) 602, 603, 604, and Chlordene Plus (CP) in Niagara River suspended sediment, a Lake Ontario sediment core, and Lake Ontario lake trout were investigated, with Mirex and Dechlorane Plus (DP) included for comparison. Temporal concentration trends were generally consistent in each of the media for all compounds with the lowest concentrations observed in or after the late 1990s. In Niagara River suspended sediments, all compounds showed seasonal variation over a year with distinct profiles observed. The relative concentration patterns observed were total DP > Mirex > Dec 602 and Dec 604 > Dec 603 > CP in suspended sediments and sediment cores, whereas Mirex was highest in lake trout, followed by Dec 602 and DP. Dec 602 concentrations were 50 to 380 times greater than those of DP in lake trout, indicating Dec 602 has a greater bioaccumulation potential. The estimated biota-sediment accumulation factor (BSAF) for Dec 602 was much greater than for DP in Lake Ontario, and was greater than those calculated for PBDEs, indicating that assessment of some dechlorane compounds is merited if use is ongoing or planned.

Occurrence and distribution of sulfonylurea and related herbicides in central Canadian surface waters 2006-2008.

Surface water sampling in 2006-2008 measured the occurrence of sulfonylureas and related herbicides (SUs) during base flow conditions and wet weather events. Flumetsulam (29.2%), diuron (36.5%) and fomesafen (25.3%) were most frequently detected over the course of the study. Typical SU concentrations were in the low parts per trillion range; however, maximum concentrations of fomesafen (873 ng/L), linuron (856 ng/L) and diuron (2,900 ng/L) approached or exceeded 1 µg/L. The temporal trend in SUs showed a correlation with application periods. In general, detections of SUs were more frequent where rotation of row crops was more intense. Sampling during wet-weather events indicated potential for a range of SUs to be flushed into surface waters at relatively high concentrations.

Comparison of different approaches to quantify substituted polycyclic aromatic compounds.

Unlike native polycyclic aromatic hydrocarbons (PAHs), quantitation of substituted polycyclic aromatic compounds (PACs) has been a challenge in the environmental industry. The challenge can be attributed in part to the large number of theoretically possible isomers and the lack of authentic standards for quantitation. In addition, the lack of a unified approach to the quantitation of these compounds has led to poor interlaboratory accuracy. Because these compounds are often used for toxicology studies or to delineate sources and fingerprinting, it is vital that a standardized approach to quantify them is established. This study evaluated different quantitation approaches to quantify both 16 individual PACs and 32 groups/clusters of substituted PACs in three standard reference materials (SRM 1944 - New York / New Jersey waterway sediments, SRM 1597 - a coal tar sample and SRM 2779 - Gulf of Mexico crude oil). The methods employed include: (1) external calibration taking into account recovery correction factor for each analyte, (2) an average relative response factor (ARRF) of PACs obtained with a recovery correction, (3) ARRF of PACs obtained using uncorrected peak areas (i.e., no recovery correction), (4) ARRF of PACs calculated by normalization to deuterated PAHs and (5) ARRF of native PAHs to quantify substituted PACs. The evaluation of concentrations of individually substituted PACs from the different quantitative approaches compared to the certified/reference values showed that methods 1, 2 and 3 performed best. The average percentage of compounds that fell within our acceptable limit (±30%) using methods 1, 2 and 3 for SRM-1944, -1597a and -2779 was 87, 75 and 100%, respectively. Using native PAHs to quantify their substituted analogs resulted in data of the poorest quality. Irrespective of the approach used, there were significant systematic errors in measurements on clusters/groups PACs most notably C1 and C2-benzanthracenes/ chrysenes/triplenylenes, and C2- and C3-dibenzothiophenes being consistently greater than 100% of the stated value. Commerical availability of more substituted PACs will mitigate the biases associated with the quanititation of PAC clusters/groups.

New approaches to reduce sample processing times for the determination of polycyclic aromatic compounds in environmental samples.

This study validates two approaches to streamlining the processing of sediment and biota for a suite of polycyclic aromatic compounds (PACs) with a wide range of chemical properties, including polycyclic aromatic hydrocarbons (PAHs) and alkyl-PAHs (APAHs), and a new class of environmental contaminants, halogenated PAHs (HPAHs). One method is based on one-step in situ extraction/cleanup using accelerated solvent extraction (ASE) in which a mixture of copper, deactivated alumina and silica gel were added directly to the ASE cell along with sample; the second technique is based on dispersive solid phase extraction (dSPE) using alumina/silica for cleanup of biota samples to augment conventional ASE extraction combined with gel permeation chromatography. Validation protocols were performed in accordance with the ISO/IEC 17025 guidelines, whereby method performance characteristics, i.e., accuracy, precision, linearity, limits of detection and ruggedness, were evaluated. Accuracies generally ranged from 70 to 120% for the in situ ASE method and 70-100% for the dSPE technique. Limits of detection/quantitation for the 45 target analytes for in situ ASE and dSPE methods were determined to be < 2.5/8 pg µL-1, and < 20/60 pg µL-1, respectively. Intra- and inter-day repeatability for both methods were < 25% except for 1 APAH which had an inter-day precision of 35% using the dSPE method. Neither method was affected by any of the purposeful changes attempted which implies that both methods are robust. Results of our validation studies showed excellent data quality for both methods in addition to achieving a reduction in sample processing times.

Development of liquid chromatography atmospheric pressure chemical ionization tandem mass spectrometry for analysis of halogenated flame retardants in wastewater.

Until recently, atmospheric pressure photoionization (APPI) has typically been used for the determination of non-polar halogenated flame retardants (HFRs) by liquid chromatography (LC) tandem mass spectrometry. In this study, we demonstrated the feasibility of utilizing liquid chromatography atmospheric pressure chemical ionization (APCI) tandem mass spectrometry (LC-APCI-MS/MS) for analysis of 38 HFRs. This developed method offered three advantages: simplicity, rapidity, and high sensitivity. Compared with APPI, APCI does not require a UV lamp and a dopant reagent to assist atmospheric pressure ionization. All the isomers and the isobaric compounds were well resolved within 14-min LC separation time. Excellent instrument detection limits (6.1 pg on average with 2.0 muL injection) were observed. The APCI mechanism was also investigated. The method developed has been applied to the screening of wastewater samples for screening purpose, with concentrations determined by LC-APCI-MS/MS agreeing with data obtained via gas chromatography high resolution mass spectrometry.

Halogenated organic contaminants of concern in urban-influenced waters of Lake Ontario, Canada: Passive sampling with targeted and non-targeted screening.

Passive samplers are useful tools for monitoring hydrophobic, persistent, and potentially bioaccumulative contaminants in the environment. In this study, low density polyethylene passive samplers were deployed in urban-influenced and background nearshore freshwaters of northwestern Lake Ontario and analyzed for a broad range of both legacy halogenated organic contaminants (HOCs) and halogenated flame retardants (HFRs). Non-targeted analysis was conducted for screening additional halogenated substances. For most compounds, concentrations were greatest in the industrialized Hamilton Harbour and more generally at sites that have stronger influences of wastewater effluent discharges and stormwater run-off through rivers and creeks. Polychlorinated biphenyls (PCBs) remain the dominant class of HOCs in water, with dissolved-phase concentrations ranging from 10 to 4100 pg/L (ΣPCBs), followed by polybrominated diphenylethers (ΣPBDEs; 14-960 pg/L) and the organochlorine pesticides (OCPs; 22-290 pg/L). Several non-PBDE brominated flame retardants (nBFRs) and chlorinated Dechlorane-related compounds were detected, with hexabromocyclododecanes (ΣHBCDD; sum of 3 diastereoisomers) the most abundant (1.0-21 pg/L). Non-targeted screening of samples by high resolution mass spectrometry using Kendrick mass defect plots for data analysis indicated that several other halogenated compounds were present in waters at relatively high abundances compared to the flame retardants, based on semi-quantitative estimates. These included methyl-triclosan, four halogenated anisoles (2,4,6-tribromoanisole, dimethyl-trichloroanisole, pentachloroanisole, and pentachlorothioanisole), and pentachloro-aniline. Dissolved-phase methyl-triclosan was estimated to contribute up to approximately 40% of the summed target HOC concentrations. Polyethylene passive samplers provided an excellent medium for both non-targeted screening of HOCs not currently included in monitoring programs and tracking brominated and chlorinated chemicals slated for reductions in uses and emissions through international (Stockholm Convention) and binational (Great Lakes) agreements.