Beam propagation simulation of phased laser arrays with atmospheric perturbations.

Directed energy phased array (DEPA) systems have been proposed for applications such as beaming optical power for electrical use on remote sensors, rovers, spacecraft, and future moon bases, as well as for planetary defense against asteroids and photonic propulsion up to relativistic speeds. All such scenarios involve transmission through atmosphere and beam perturbations due to turbulence that must be quantified. Numerical beam propagation and feedback control simulations were performed using an algorithm optimized for efficient calculation of real-time beam dynamics in a Kolmogorov atmosphere. Results were used to quantify the effectiveness of the system design with different degrees of atmospheric turbulence and zenith angles, and it was found that a large aperture DEPA system placed at a high altitude site can produce a stable diffraction limited spot (Strehl>0.8) on space-based targets for Fried length r0≥10cm (at 500 nm) and zenith angles up to 60 deg, depending on atmospheric conditions. We believe these results are promising for the next generation of power beaming and deep space exploration applications.

General approach to reversing ketol-acid reductoisomerase cofactor dependence from NADPH to NADH.

To date, efforts to switch the cofactor specificity of oxidoreductases from nicotinamide adenine dinucleotide phosphate (NADPH) to nicotinamide adenine dinucleotide (NADH) have been made on a case-by-case basis with varying degrees of success. Here we present a straightforward recipe for altering the cofactor specificity of a class of NADPH-dependent oxidoreductases, the ketol-acid reductoisomerases (KARIs). Combining previous results for an engineered NADH-dependent variant of Escherichia coli KARI with available KARI crystal structures and a comprehensive KARI-sequence alignment, we identified key cofactor specificity determinants and used this information to construct five KARIs with reversed cofactor preference. Additional directed evolution generated two enzymes having NADH-dependent catalytic efficiencies that are greater than the wild-type enzymes with NADPH. High-resolution structures of a wild-type/variant pair reveal the molecular basis of the cofactor switch.

Improved product-per-glucose yields in P450-dependent propane biotransformations using engineered Escherichia coli.

P450-dependent biotransformations in Escherichia coli are attractive for the selective oxidation of organic molecules using mild and sustainable procedures. The overall efficiency of these processes, however, relies on how effectively the NAD(P)H cofactors derived from oxidation of the carbon source are utilized inside the cell to support the heterologous P450-catalyzed reaction. In this work, we investigate the use of metabolic and protein engineering to enhance the product-per-glucose yield (Y(PPG)) in whole-cell reactions involving a proficient NADPH-dependent P450 propane monooxygenase prepared by directed evolution [P450(PMO)R2; Fasan et al. (2007); Angew Chem Int Ed 46:8414-8418]. Our studies revealed that the metabolism of E. coli (W3110) is able to support only a modest propanol: glucose molar ratio (YPPG ~ 0.5) under aerobic, nongrowing conditions. By altering key processes involved in NAD(P)H metabolism of the host, considerable improvements of this ratio could be achieved. A metabolically engineered E. coli strain featuring partial inactivation of the endogenous respiratory chain (Δndh) combined with removal of two fermentation pathways (ΔadhE, Δldh) provided the highest Y(PPG) (1.71) among the strains investigated, enabling a 230% more efficient utilization of the energy source (glucose) in the propane biotransformation compared to the native E. coli strain. Using an engineered P450(PMO)R2 variant which can utilize NADPH and NADH with equal efficiency, we also established that dual cofactor specificity of the P450 enzyme can provide an appreciable improvement in Y(PPG). Kinetic analyses suggest, however, that much more favorable parameters (K(M), k(cat)) for the NADH-driven reaction are required to effectively compete with the host's endogenous NADH-utilizing enzymes. Overall, the metabolic/protein engineering strategies described here can be of general value for improving the performance of NAD(P)H-dependent whole-cell biotransformations in E. coli.

Evolving strategies for enzyme engineering.

Directed evolution is a common technique to engineer enzymes for a diverse set of applications. Structural information and an understanding of how proteins respond to mutation and recombination are being used to develop improved directed evolution strategies by increasing the probability that mutant sequences have the desired properties. Strategies that target mutagenesis to particular regions of a protein or use recombination to introduce large sequence changes can complement full-gene random mutagenesis and pave the way to achieving ever more ambitious enzyme engineering goals.

Analysis of shuffled gene libraries.

In vitro recombination of homologous genes (family shuffling) has been proposed as an effective search strategy for laboratory evolution of genes and proteins. Few data are available, however, on the composition of shuffled gene libraries, from which one could assess the efficiency of recombination and optimize protocols. Here, probe hybridization is used in a macroarray format to analyze chimeric DNA libraries created by DNA shuffling. Characterization of hundreds of shuffled genes encoding dioxygenases has elucidated important biases in the shuffling reaction. As expected, crossovers are favored in regions of high sequence identity. A sequence-based model of homologous recombination that captures this observed bias was formulated using the experimental results. The chimeric genes were found to show biases in the incorporation of sequences from certain parents, even before selection. Statistically different patterns of parental incorporation in genes expressing functional proteins can help to identify key sequence-function relationships.

Stereoselective hydroxylation of an achiral cyclopentanecarboxylic acid derivative using engineered P450s BM-3.

Substrate engineered, achiral carboxylic acid derivative was biohydroxylated with various mutants of cytochrome P450 BM-3 to give two out of the four possible diastereoisomers in high de and ee. The BM-3 mutants exhibit up to 9200 total turnovers for hydroxylation of the engineered substrate, which without the protecting group is not transformed by this enzyme.

Structure-guided engineering of Lactococcus lactis alcohol dehydrogenase LlAdhA for improved conversion of isobutyraldehyde to isobutanol.

We have determined the X-ray crystal structures of the NADH-dependent alcohol dehydrogenase LlAdhA from Lactococcus lactis and its laboratory-evolved variant LlAdhA(RE1) at 1.9Šand 2.5Šresolution, respectively. LlAdhA(RE1), which contains three amino acid mutations (Y50F, I212T, and L264V), was engineered to increase the microbial production of isobutanol (2-methylpropan-1-ol) from isobutyraldehyde (2-methylpropanal). Structural comparison of LlAdhA and LlAdhA(RE1) indicates that the enhanced activity on isobutyraldehyde stems from increases in the protein's active site size, hydrophobicity, and substrate access. Further structure-guided mutagenesis generated a quadruple mutant (Y50F/N110S/I212T/L264V), whose KM for isobutyraldehyde is ∼17-fold lower and catalytic efficiency (kcat/KM) is ∼160-fold higher than wild-type LlAdhA. Combining detailed structural information and directed evolution, we have achieved significant improvements in non-native alcohol dehydrogenase activity that will facilitate the production of next-generation fuels such as isobutanol from renewable resources.

Enantioselective epoxidation of terminal alkenes to (R)- and (S)-epoxides by engineered cytochromes P450 BM-3.

Cytochrome P450 BM-3 from Bacillus megaterium was engineered for enantioselective epoxidation of simple terminal alkenes. Screening saturation mutagenesis libraries, in which mutations were introduced in the active site of an engineered P450, followed by recombination of beneficial mutations generated two P450 BM-3 variants that convert a range of terminal alkenes to either (R)- or (S)-epoxide (up to 83 % ee) with high catalytic turnovers (up to 1370) and high epoxidation selectivities (up to 95 %). A biocatalytic system using E. coli lysates containing P450 variants as the epoxidation catalysts and in vitro NADPH regeneration by the alcohol dehydrogenase from Thermoanaerobium brockii generates each of the epoxide enantiomers, without additional cofactor.

Functional expression of a fungal laccase in Saccharomyces cerevisiae by directed evolution.

Laccase from Myceliophthora thermophila (MtL) was expressed in functional form in Saccharomyces cerevisiae. Directed evolution improved expression eightfold to the highest yet reported for a laccase in yeast (18 mg/liter). Together with a 22-fold increase in k(cat), the total activity was enhanced 170-fold. Specific activities of MtL mutants toward 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) and syringaldazine indicate that substrate specificity was not changed by the introduced mutations. The most effective mutation (10-fold increase in total activity) introduced a Kex2 protease recognition site at the C-terminal processing site of the protein, adjusting the protein sequence to the different protease specificities of the heterologous host. The C terminus is shown to be important for laccase activity, since removing it by a truncation of the gene reduces activity sixfold. Mutations accumulated during nine generations of evolution for higher activity decreased enzyme stability. Screening for improved stability in one generation produced a mutant more stable than the heterologous wild type and retaining the improved activity. The molecular mass of MtL expressed in S. cerevisiae is 30% higher than that of the same enzyme expressed in M. thermophila (110 kDa versus 85 kDa). Hyperglycosylation, corresponding to a 120-monomer glycan on one N-glycosylation site, is responsible for this increase. This S. cerevisiae expression system makes MtL available for functional tailoring by directed evolution.

Regio- and enantioselective alkane hydroxylation with engineered cytochromes P450 BM-3.

Cytochrome P450 BM-3 from Bacillus megaterium was engineered using a combination of directed evolution and site-directed mutagenesis to hydroxylate linear alkanes regio- and enantioselectively using atmospheric dioxygen as an oxidant. BM-3 variant 9-10A-A328V hydroxylates octane at the 2-position to form S-2-octanol (40% ee). Another variant, 1-12G, also hydroxylates alkanes larger than hexane primarily at the 2-position but forms R-2-alcohols (40-55% ee). These biocatalysts are highly active (rates up to 400 min(-1)) and support thousands of product turnovers. The regio- and enantioselectivities are retained in whole-cell biotransformations with Escherichia coli, where the engineered P450s can be expressed at high levels and the cofactor is supplied endogenously.