Extracellular pH sensing by plant cell-surface peptide-receptor complexes.

The extracellular pH is a vital regulator of various biological processes in plants. However, how plants perceive extracellular pH remains obscure. Here, we report that plant cell-surface peptide-receptor complexes can function as extracellular pH sensors. We found that pattern-triggered immunity (PTI) dramatically alkalinizes the acidic extracellular pH in root apical meristem (RAM) region, which is essential for root meristem growth factor 1 (RGF1)-mediated RAM growth. The extracellular alkalinization progressively inhibits the acidic-dependent interaction between RGF1 and its receptors (RGFRs) through the pH sensor sulfotyrosine. Conversely, extracellular alkalinization promotes the alkaline-dependent binding of plant elicitor peptides (Peps) to its receptors (PEPRs) through the pH sensor Glu/Asp, thereby promoting immunity. A domain swap between RGFR and PEPR switches the pH dependency of RAM growth. Thus, our results reveal a mechanism of extracellular pH sensing by plant peptide-receptor complexes and provide insights into the extracellular pH-mediated regulation of growth and immunity in the RAM.

Microfluidic Platform for Time-Resolved Characterization of Protein Higher-Order Structures and Dynamics Using Top-Down Mass Spectrometry.

Characterization of protein higher-order structures and dynamics is essential for understanding the biological functions of proteins and revealing the underlying mechanisms. Top-down mass spectrometry (MS) accesses structural information at both the intact protein level and the peptide fragment level. Native top-down MS allows analysis of a protein complex's architecture and subunits' identity and modifications. Top-down hydrogen/deuterium exchange (HDX) MS offers high spatial resolution for conformational or binding interface analysis and enables conformer-specific characterization. A microfluidic chip can provide superior performance for front-end reactions useful for these MS workflows, such as flexibility in manipulating multiple reactant flows, integrating various functional modules, and automation. However, most microchip-MS devices are designed for bottom-up approaches or top-down proteomics. Here, we demonstrate a strategy for designing a microchip for top-down MS analysis of protein higher-order structures and dynamics. It is suitable for time-resolved native MS and HDX MS, with designs aiming for efficient ionization of intact protein complexes, flexible manipulation of multiple reactant flows, and precise control of reaction times over a broad range of flow rates on the submicroliter per minute scale. The performance of the prototype device is demonstrated by measurements of systems including monoclonal antibodies, antibody-antigen complexes, and coexisting protein conformers. This strategy may benefit elaborate structural analysis of biomacromolecules and inspire method development using the microchip-MS approach.

Deciphering the metabolic role of AMPK in cancer multi-drug resistance.

Multi-drug resistance (MDR) is a curious bottleneck in cancer research and chemotherapy, whereby some cells rapidly adapt to the tumor microenvironment via a myriad of heterogeneous metabolic activities. Despite being a major impediment to treatment, there is a silver lining: control over metabolic regulation could be an effective approach to overcome or correct resistance pathways. In this critical review, we comprehensively and carefully curated and analyzed large networks of previously identified proteins associated with metabolic adaptation in MDR. We employed data and text mining to study and categorize more than 600 studies in PubMed, with particular focus on AMPK, a central and fundamental modulator in the energy metabolism network that has been specifically implicated in cancer MDR pathways. We have identified one protein set of metabolic adaptations with 137 members closely related to cancer MDR processes, and a second protein set with 165 members derived from AMPK-based networks, with 28 proteins found at the intersection between the two sets. Furthermore, according to genomics analysis of the cancer genome atlas (TCGA) provisional data, the highest alteration frequency (80.0%) of the genes encoding the intersected proteins (28 proteins), ranked three cancer types with quite remarkable significance across 166 studies. The hierarchical relationships of the entire identified gene and protein networks indicate broad correlations in AMPK-mediated metabolic regulation pathways, which we use decipher and depict the metabolic roles of AMPK and demonstrate the potential of metabolic control for therapeutic intervention in MDR.

Close Temporal Relationship between Oscillating Cytosolic K+ and Growth in Root Hairs of Arabidopsis.

Root hair elongation relies on polarized cell expansion at the growing tip. As a major osmotically active ion, potassium is expected to be continuously assimilated to maintain cell turgor during hair tip growth. However, due to the lack of practicable detection methods, the dynamics and physiological role of K+ in hair growth are still unclear. In this report, we apply the small-molecule fluorescent K+ sensor NK3 in Arabidopsis root hairs for the first time. By employing NK3, oscillating cytoplasmic K+ dynamics can be resolved at the tip of growing root hairs, similar to the growth oscillation pattern. Cross-correlation analysis indicates that K+ oscillation leads the growth oscillations by approximately 1.5 s. Artificially increasing cytoplasmic K+ level showed no significant influence on hair growth rate, but led to the formation of swelling structures at the tip, an increase of cytosolic Ca2+ level and microfilament depolymerization, implying the involvement of antagonistic regulatory factors (e.g., Ca2+ signaling) in the causality between cytoplasmic K+ and hair growth. These results suggest that, in each round of oscillating root hair elongation, the oscillatory cell expansion accelerates on the heels of cytosolic K+ increment, and decelerates with the activation of antagonistic regulators, thus forming a negative feedback loop which ensures the normal growth of root hairs.

A Plug-and-Play, Drug-on-Pillar Platform for Combination Drug Screening Implemented by Microfluidic Adaptive Printing.

Traditional high-throughput drug combination screening requires automatic pipetting of drugs into high-density microtiter plates. Here, a drug-on-pillar platform is proposed for efficient combination drug screening. Using the proposed approach, combination drug screening can be carried out in a plug-and-play manner, allowing for high-throughput screening of large permutations of drug combinations at various concentrations, such that drug dispensing and cell-based screening can be temporally separated and therefore can potentially be performed at distant laboratories. The dispensing is implemented using our recently developed microfluidic pneumatic printing platform, which features a low-cost disposable cartridge that minimizes cross contamination. Moreover, our previously developed drug nanoformulation method with amphiphilic telodendrimers has been utilized to maintain drug stability in a dry form, allowing for convenient drug storage, shipping, and subsequent rehydration. Combining the features described above, we have implemented a 1260-spot drug combination array to study the effect of paired drugs against MDA-MB-231 triple negative human breast cancer cells. This study supports the feasibility of the drug-on-pillar platform for combination drug screening and has provided valuable insight into drug combination efficacy against breast cancer.

Digital polymerase chain reaction in an array of femtoliter polydimethylsiloxane microreactors.

We developed a simple, compact microfluidic device to perform high dynamic-range digital polymerase chain reaction (dPCR) in an array of isolated 36-femtoliter microreactors. The density of the microreactors exceeded 20000/mm(2). This device, made from polydimethylsiloxane (PDMS), allows the samples to be loaded into all microreactors simultaneously. The microreactors are completely sealed through the deformation of a PDMS membrane. The small volume of the microreactors ensures a compact device with high reaction efficiency and low reagent and sample consumption. Future potential applications of this platform include multicolor dPCR and massively parallel dPCR for next generation sequencing library preparation.

Detection of serum phospholipids by microchannel-integrated black phosphorus-assisted laser desorption/ionization mass spectrometry.

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been widely applied in the analysis of phospholipids in biological samples. However, it remains a challenge to improve the sensitivity and reproducibility and to control the background noise of matrices. In this study, black phosphorus nanomaterial was used as the matrix of MALDI-MS, and microchannel technique was combined. This microchannel-integrated black phosphorus-assisted laser desorption/ionization (BPALDI) MS approach can effectively detect a variety of lipids with a small amount of sample, and has high sensitivity for phosphatidylcholines (PC) and lysophosphatidylcholines (LPC) with a detection limit of 0.2 µg/mL. Compared with traditional matrices, BPALDI-MS has the advantages of high sensitivity, good reproducibility, and high salt tolerance. This method was successfully applied in the detection of serum PC/LPC ratios in children patients with asthma or bronchopneumonia. This work provides a novel application of black phosphorus matrix and microchannel technique, and gives new insights into method development of rapid screening and identification of disease indicators in biological fluids.

Design and High-Resolution Analysis of an Efficient Periodic Split-and-Recombination Microfluidic Mixer.

We developed a highly efficient passive mixing device based on a split-and-recombine (SAR) configuration. This micromixer was constructed by simply bonding two identical microfluidic periodical open-trench patterns face to face. The structure parameters of periodical units were optimized through numerical simulation to facilitate the mixing efficiency. Despite the simplicity in design and fabrication, it provided rapid mixing performance in both experiment and simulation conditions. To better illustrate the mixing mechanism, we developed a novel scheme to achieve high-resolution confocal imaging of serial channel cross-sections to accurately characterize the mixing details and performance after each SAR cycle. Using fluorescent IgG as an indicator, nearly complete mixing was achieved using only four SAR cycles in an aqueous solution within a device's length of less than 10 mm for fluids with a Péclet number up to 8.7 × 104. Trajectory analysis revealed that each SAR cycle transforms the input fluids using three synergetic effects: rotation, combination, and stretching to increase the interfaces exponentially. Furthermore, we identified that the pressure gradients in the parallel plane of the curved channel induced vertical convection, which is believed to be the driving force underlying these effects to accelerate the mixing process.

Immunometabolism modulation, a new trick of edible and medicinal plants in cancer treatment.

The edible and medicinal plants (EMPs) are becoming an abundant source for cancer prevention and treatment since the natural and healthy trend for modern human beings. Currently, there are more than one hundred species of EMPs widely used and listed by the national health commission of China, and most of them indicate immune or metabolic regulation potential in cancer treatment with numerous studies over the past two decades. In the present review, we focused on the metabolic influence in immunocytes and tumor microenvironment, including immune response, immunosuppressive factors and cancer cells, discussing the immunometabolic potential of EMPs in cancer treatment. There are more than five hundred references collected and analyzed through retrieving pharmacological studies deposited in PubMed by medical subject headings and the corresponding names derived from pharmacopoeia of China as a sole criterion. Finally, the immunometabolism modulation of EMPs was sketch out implying an immunometabolic control in cancer treatment.

Droplet digital PCR enabled by microfluidic impact printing for absolute gene quantification.

Digital PCR enabled high-sensitivity and quantitative measurements of rare biological variants. A new digital droplet-enabled PCR technology was introduced in this paper, which partitioned genetic targets into a planar nanoliter droplet array by using a microfluidic impact printer (MIP) with a disposable microfluidic chip. The accuracy of this MIP-enabled PCR technology was verified by detecting a series of concentration gradients of GAPDH gene across spanning four orders of magnitude (from 0.464 copies/µL to 464 copies/µL). Furthermore, this technology was applied to detect the expressions of p53 gene in colon cancer tissues and adjacent nontumorous tissues, from which the copies of the nucleic acids could be absolute-quantitatively determined. The outcomes were consistent with the results of using the conventional real-time PCR, demonstrating a great potential of the MIP-enabled digital PCR in detecting gene expression in clinical samples.

Immersed AC electrospray (iACE) for monodispersed aqueous droplet generation.

We report a new immersed alternating current (AC) electrospray droplet generation method that can generate monodispersed water-in-oil droplets, with diameters ranging from 5 µm to 150 µm, in a stationary oil phase. This method offers high through-put, easy size tuning, and droplets with a viscous aqueous phase at high ionic strengths (raw physiological samples). Yet, it does not require coordinated flows of the dispersed/continuous phases or even a microfluidic chip. The design relies on a small constant back pressure (less than 0.1 atm) to drive the water phase through a nozzle (glass micropipette) and a non-isotropic AC electric Maxwell pressure to eject it into the oil phase. Undesirable field-induced discharge and nanojet formation at the tip are suppressed with a biocompatible polymer, polyethylene oxide. Its viscoelastic property favors the monodispersed dripping mechanism, with a distinct neck forming at the capillary tip before pinch-off, such that the tip dimension is the only controlling length scale. Consecutive droplets are connected by a whipping filament that disperses the drops away from the high-field nozzle to prevent electro-coalescence. A scaling theory is developed to correlate the droplet size with the applied pressure, the most important tuning parameter, and to determine the optimum frequency. The potential applications of this technology to biological systems are demonstrated with a digital loop-mediated isothermal amplification experiment, with little damage to the nucleic acids and other biomolecules, but with easy adaptive tuning for the optimum droplet number for accurate quantification.

Dotette: Programmable, high-precision, plug-and-play droplet pipetting.

Manual micropipettes are the most heavily used liquid handling devices in biological and chemical laboratories; however, they suffer from low precision for volumes under 1 µl and inevitable human errors. For a manual device, the human errors introduced pose potential risks of failed experiments, inaccurate results, and financial costs. Meanwhile, low precision under 1 µl can cause severe quantification errors and high heterogeneity of outcomes, becoming a bottleneck of reaction miniaturization for quantitative research in biochemical labs. Here, we report Dotette, a programmable, plug-and-play microfluidic pipetting device based on nanoliter liquid printing. With automated control, protocols designed on computers can be directly downloaded into Dotette, enabling programmable operation processes. Utilizing continuous nanoliter droplet dispensing, the precision of the volume control has been successfully improved from traditional 20%-50% to less than 5% in the range of 100 nl to 1000 nl. Such a highly automated, plug-and-play add-on to existing pipetting devices not only improves precise quantification in low-volume liquid handling and reduces chemical consumptions but also facilitates and automates a variety of biochemical and biological operations.

Remodeling of Mitochondrial Flashes in Muscular Development and Dystrophy in Zebrafish.

Mitochondrial flash (mitoflash) is a highly-conserved, universal, and physiological mitochondrial activity in isolated mitochondria, intact cells, and live organisms. Here we investigated developmental and disease-related remodeling of mitoflash activity in zebrafish skeletal muscles. In transgenic zebrafish expressing the mitoflash reporter cpYFP, in vivo imaging revealed that mitoflash frequency and unitary properties underwent multiphasic and muscle type-specific changes, accompanying mitochondrial morphogenesis from 2 to 14 dpf. In particular, short (S)-type mitoflashes predominated in early muscle formation, then S-, transitory (T)- and regular (R)-type mitoflashes coexisted during muscle maturation, followed by a switch to R-type mitoflashes in mature skeletal muscles. In early development of muscular dystrophy, we found accelerated S- to R-type mitoflash transition and reduced mitochondrial NAD(P)H amidst a remarkable cell-to-cell heterogeneity. This study not only unravels a profound functional and morphological remodeling of mitochondria in developing and diseased skeletal muscles, but also underscores mitoflashes as a useful reporter of mitochondrial function in milieu of live animals under physiological and pathophysiological conditions.

WormFarm: a quantitative control and measurement device toward automated Caenorhabditis elegans aging analysis.

Caenorhabditis elegans is a leading model organism for studying the basic mechanisms of aging. Progress has been limited, however, by the lack of an automated system for quantitative analysis of longevity and mean lifespan. To address this barrier, we developed 'WormFarm', an integrated microfluidic device for culturing nematodes. Cohorts of 30-50 animals are maintained throughout their lifespan in each of eight separate chambers on a single WormFarm polydimethylsiloxane chip. Design features allow for automated removal of progeny and efficient control of environmental conditions. In addition, we have developed computational algorithms for automated analysis of video footage to quantitate survival and other phenotypes, such as body size and motility. As proof-of-principle, we show here that WormFarm successfully recapitulates survival data obtained from a standard plate-based assay for both RNAi-mediated and dietary-induced changes in lifespan. Further, using a fluorescent reporter in conjunction with WormFarm, we report an age-associated decrease in fluorescent intensity of GFP in transgenic worms expressing GFP tagged with a mitochondrial import signal under the control of the myo-3 promoter. This marker may therefore serve as a useful biomarker of biological age and aging rate.

A compact optofluidic cytometer with integrated liquid-core/PDMS-cladding waveguides.

We developed a simple method to construct liquid-core/PDMS-cladding optical waveguides through pressurized filling of dead-ended micro-channels with optical fluids. The waveguides are in the same layer as microfluidic channels which greatly simplifies device fabrication. With proper contrast between the refractive index of the core and cladding, the transmission loss of the waveguides is less than 5 dB cm(-1). We also developed a method to create flat and optically clear surfaces on the sides of PDMS devices in order to couple light between free-space and the waveguides embedded inside the chip. With these newly developed techniques, we make a compact flow cytometer and demonstrate the fluorescence counting of single cells at a rate of up to ~50 cell s(-1) and total sample requirement of a few microlitres. This method of making liquid-core optical waveguides and flat surfaces has great potential to be integrated into many PDMS-based microsystems.

A high-throughput imaging system to quantitatively analyze the growth dynamics of plant seedlings.

Most current methods for analyzing the growth rate of plant seedlings are limited to low-throughput experimental configurations. We have developed an automatic system to investigate the dynamics of the growth of hypocotyls using Arabidopsis as model. This system is able to capture time-lapse infrared images of 24 seedlings automatically, with a spatial resolution of 2 µm per pixel and temporal interval of 5 min. Seedling length is rapidly calculated using automated geometric image-processing algorithms. With this high-throughput platform, we have investigated the genotype dependent difference of growth patterns, as well as the response to plant hormone - ethylene. Our analyses suggest that cytoskeleton function is not required in ethylene-induced hypocotyl inhibition. This novel integrative method can be applied to large-scale dynamic screening of plants, as well as any other image-based biological studies related to dynamic growth.

Discretely tunable optofluidic compound microlenses.

We report a novel method to fabricate high zoom-ratio optofluidic compound microlenses using poly(dimethylsiloxane) with multi-layer architecture. The layered structure of deformable lenses, biconvex and plano-concave, are self-aligned as a group. The refractive index contrast of each lens, which is controlled by filling the chambers with a specific medium, is the key factor for determining the device's numerical aperture. The chip has multiple independent pneumatic valves that can be digitally switched on and off, pushing the liquid into the lens chambers with great accuracy and consistency. This quickly and precisely tunes the focal length of the microlens device from centimetres to sub-millimetre. The system has great potential for applications in portable microscopic imaging, bio-sensing, and laser beam configuration.

Potential-induced copper periodic micro-/nanostructures by electrodeposition on silicon substrate.

We demonstrate the fabrication of large scale nano- and micropatterned copper periodic structures on a silicon substrate without imposed templates. In the electrodeposition process, we employ a periodic variation voltage in an ultrathin layer of concentrated CuSO(4) electrolyte. The pattern can be controlled by varying the frequency of the applied potential. We suggest that the observed periodic micro-/nanostructures are caused by the lag of the migrating ion concentration profile versus the applied voltage profile near the tip of the growth.