Novel Electroactive Mineralized Polyacrylonitrile/PEDOT:PSS Electrospun Nanofibers for Bone Repair Applications.

Bone defect repair remains a critical challenge in current orthopedic clinical practice, as the available therapeutic strategies only offer suboptimal outcomes. Therefore, bone tissue engineering (BTE) approaches, involving the development of biomimetic implantable scaffolds combined with osteoprogenitor cells and native-like physical stimuli, are gaining widespread interest. Electrical stimulation (ES)-based therapies have been found to actively promote bone growth and osteogenesis in both in vivo and in vitro settings. Thus, the combination of electroactive scaffolds comprising conductive biomaterials and ES holds significant promise in improving the effectiveness of BTE for clinical applications. The aim of this study was to develop electroconductive polyacrylonitrile/poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PAN/PEDOT:PSS) nanofibers via electrospinning, which are capable of emulating the native tissue's fibrous extracellular matrix (ECM) and providing a platform for the delivery of exogenous ES. The resulting nanofibers were successfully functionalized with apatite-like structures to mimic the inorganic phase of the bone ECM. The conductive electrospun scaffolds presented nanoscale fiber diameters akin to those of collagen fibrils and displayed bone-like conductivity. PEDOT:PSS incorporation was shown to significantly promote scaffold mineralization in vitro. The mineralized electroconductive nanofibers demonstrated improved biological performance as observed by the significantly enhanced proliferation of both human osteoblast-like MG-63 cells and human bone marrow-derived mesenchymal stem/stromal cells (hBM-MSCs). Moreover, mineralized PAN/PEDOT:PSS nanofibers up-regulated bone marker genes expression levels of hBM-MSCs undergoing osteogenic differentiation, highlighting their potential as electroactive biomimetic BTE scaffolds for innovative bone defect repair strategies.

Neural stem cell differentiation by electrical stimulation using a cross-linked PEDOT substrate: Expanding the use of biocompatible conjugated conductive polymers for neural tissue engineering.

BACKGROUND: The use of conjugated polymers allows versatile interactions between cells and flexible processable materials, while providing a platform for electrical stimulation, which is particularly relevant when targeting differentiation of neural stem cells and further application for therapy or drug screening. METHODS: Materials were tested for cytotoxicity following the ISO10993-5. PEDOT: PSS was cross-linked. ReNcellVM neural stem cells (NSC) were seeded in laminin coated surfaces, cultured for 4 days in the presence of EGF (20 ng/mL), FGF-2 (20 ng/mL) and B27 (20 µg/mL) and differentiated over eight additional days in the absence of those factors under 100Hz pulsed DC electrical stimulation, 1V with 10 ms pulses. NSC and neuron elongation aspect ratio as well as neurite length were assessed using ImageJ. Cells were immune-stained for Tuj1 and GFAP. RESULTS: F8T2, MEH-PPV, P3HT and cross-linked PEDOT: PSS (x PEDOT: PSS) were assessed as non-cytotoxic. L929 fibroblast population was 1.3 higher for x PEDOT: PSS than for glass control, while F8T2 presents moderate proliferation. The population of neurons (Tuj1) was 1.6 times higher with longer neurites (73 vs 108 µm) for cells cultured under electrical stimulus, with cultured NSC. Such stimulus led also to longer neurons. CONCLUSIONS: x PEDOT: PSS was, for the first time, used to elongate human NSC through the application of pulsed current, impacting on their differentiation towards neurons and contributing to longer neurites. GENERAL SIGNIFICANCE: The range of conductive conjugated polymers known as non-cytotoxic was expanded. x PEDOT: PSS was introduced as a stable material, easily processed from solution, to interface with biological systems, in particular NSC, without the need of in-situ polymerization.

Luminescent Di- and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis, Characterization, and Application in OLEDs.

New bis- and tris(iminopyrrole)-functionalized linear (1,2-(HNC4 H3 -C(H)N)2 -C6 H4 (2), 1,3-(HNC4 H3 -C(H)N)2 -C6 H4 (3), 1,4-(HNC4 H3 -C(H)N)2 -C6 H4 (4), 4,4'-(HNC4 H3 -C(H)N)2 -(C6 H4 -C6 H4 ) (5), 1,5-(HNC4 H3 C-(H)N)2 -C10 H6 (6), 2,6-(HNC4 H3 C-(H)N)2 -C10 H6 (7), 2,6-(HNC4 H3 C-(H)N)2 -C14 H8 (8)) and star-shaped (1,3,5-(HNC4 H3 -C(H)N-1,4-C6 H4 )3 -C6 H3 (9)) π-conjugated molecules were synthesized by the condensation reactions of 2-formylpyrrole (1) with several aromatic di- and triamines. The corresponding linear diboron chelate complexes (Ph2 B[1,3-bis(iminopyrrolyl)-phenyl]BPh2 (10), Ph2 B[1,4-bis(iminopyrrolyl)-phenyl]BPh2 (11), Ph2 B[4,4'-bis(iminopyrrolyl)-biphenyl]BPh2 (12), Ph2 B[1,5-bis(iminopyrrolyl)-naphthyl]BPh2 (13), Ph2 B[2,6-bis(iminopyrrolyl)-naphthyl]BPh2 (14), Ph2 B[2,6-bis(iminopyrrolyl)-anthracenyl]BPh2 (15)) and the star-shaped triboron complex ([4',4'',4'''-tris(iminopyrrolyl)-1,3,5-triphenylbenzene](BPh2 )3 (16)) were obtained in moderate to good yields, by the treatment of 3-9 with B(C6 H5 )3 . The ligand precursors are non-emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π-conjugation length. The photophysical properties of the luminescent polyboron compounds were measured, showing good solution fluorescence quantum yields ranging from 0.15 to 0.69. DFT and time-dependent DFT calculations confirmed that molecules 10 and 16 are blue emitters, because only one of the iminopyrrolyl groups becomes planar in the singlet excited state, whereas the second (and third) keeps the same geometry. Compound 13, in which planarity is not achieved in any of the groups, is poorly emissive. In the other examples (11, 12, 14, and 15), the LUMO is stabilized, narrowing the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO-LUMO), and the two iminopyrrolyl groups become planar, extending the size of the π-system, to afford green to yellow emissions. Organic light-emitting diodes (OLEDs) were fabricated by using the new polyboron complexes and their luminance was found to be in the order of 2400 cd m(-2) , for single layer devices, increasing to 4400 cd m(-2) when a hole-transporting layer is used.

Tunable fluorophores based on 2-(N-arylimino)pyrrolyl chelates of diphenylboron: synthesis, structure, photophysical characterization, and application in OLEDs.

Reactions of 2-(N-arylimino)pyrroles (HNC4H3C(H)=N-Ar) with triphenylboron (BPh3) in boiling toluene afford the respective highly emissive N,N'-boron chelate complexes, [BPh2 {κ(2)N,N'-NC4H3C(H)=N-Ar}] (Ar=C6H5 (12), 2,6-Me2-C6H3 (13), 2,6-iPr2-C6H3 (14), 4-OMe-C6H4 (15), 3,4-Me2-C6 H3 (16), 4-F-C6H4 (17), 4-NO2-C6H4 (18), 4-CN-C6H4 (19), 3,4,5-F3-C6H2 (20), and C6F5 (21)) in moderate to high yields. The photophysical properties of these new boron complexes largely depend on the substituents present on the aryl rings of their N-arylimino moieties. The complexes bearing electron-withdrawing aniline substituents 17-20 show more intense (e.g., ϕf =0.71 for Ar=4-CN-C6H4 (19) in THF), higher-energy (blue) fluorescent emission compared to those bearing electron-donating substituents, for which the emission is redshifted at the expense of lower quantum yields (ϕf=0.13 and 0.14 for Ar=4-OMe-C6H4 (15) and 3,4-Me2-C6H3 (16), respectively, in THF). The presence of substituents bulkier than a hydrogen atom at the 2,6-positions of the aryl groups strongly restricts rotation of this moiety towards coplanarity with the iminopyrrolyl ligand framework, inducing a shift in the emission to the violet region (λmax =410-465 nm) and a significant decrease in quantum yield (ϕf=0.005, 0.023, and 0.20 for Ar=2,6-Me2-C6H3 (13), 2,6-iPr2-C6H3 (14), and C6F5 (21), respectively, in THF), even when electron-withdrawing groups are also present. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations have indicated that the excited singlet state has a planar aryliminopyrrolyl ligand, except when prevented by steric hindrance (ortho substituents). Calculated absorption maxima reproduce the experimental values, but the error is higher for the emission wavelengths. Organic light-emitting diodes (OLEDs) have been fabricated with the new boron complexes, with luminances of the order of 3000 cd m(-2) being achieved for a green-emitting device.

Glyoxal crosslinking of electro-responsive alginate-based hydrogels: Effects on the properties.

To improve the features of alginate-based hydrogels in physiological conditions, Ca2+-crosslinked semi-interpenetrated hydrogels formed by poly(3,4-ethylenedioxythiophene):polystyrene sulfonic acid and alginate (PEDOT/Alg) were subjected to a treatment with glyoxal to form a dual ionic/covalent network. The covalent network density was systematically varied by considering different glyoxalization times (tG). The content of Ca2+ was significantly higher for the untreated hydrogel than for the glyoxalized ones, while the properties of the hydrogels were found to largely depend on tG. The porosity and swelling capacity decreased with increasing tG, while the stiffness and electrical conductance retention capacity increased with tG. The potentiodynamic response of the hydrogels notably depended on the amount of conformational restraints introduced by the glyoxal, which is a very short crosslinker. Thus, the re-accommodation of the polymer chains during the cyclic potential scans became more difficult with increasing number of covalent crosslinks. This information was used to improve the performance of untreated PEDOT/Alg as electrochemical sensor of hydrogen peroxide by simply applying a tG of 5 min. Overall, the control of the properties of glyoxalized hydrogels through tG is very advantageous and can be used as an on-demand strategy to improve the performance of such materials depending on the application.

Synergy between 3D-extruded electroconductive scaffolds and electrical stimulation to improve bone tissue engineering strategies.

In this work, we propose a simple, reliable, and versatile strategy to create 3D electroconductive scaffolds suitable for bone tissue engineering (TE) applications with electrical stimulation (ES). The proposed scaffolds are made of 3D-extruded poly(ε-caprolactone) (PCL), subjected to alkaline treatment, and of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), anchored to PCL with one of two different crosslinkers: (3-glycidyloxypropyl)trimethoxysilane (GOPS) and divinyl sulfone (DVS). Both cross-linkers allowed the formation of a homogenous and continuous coating of PEDOT:PSS to PCL. We show that these PEDOT:PSS coatings are electroconductive (11.3-20.1 S cm-1), stable (up to 21 days in saline solution), and allow the immobilization of gelatin (Gel) to further improve bioactivity. In vitro mineralization of the corresponding 3D conductive scaffolds was greatly enhanced (GOPS(NaOH)-Gel - 3.1 fold, DVS(NaOH)-Gel - 2.0 fold) and cell colonization and proliferation were the highest for the DVS(NaOH)-Gel scaffold. In silico modelling of ES application in DVS(NaOH)-Gel scaffolds indicates that the electrical field distribution is homogeneous, which reduces the probability of formation of faradaic products. Osteogenic differentiation of human bone marrow derived mesenchymal stem/stromal cells (hBM-MSCs) was performed under ES. Importantly, our results clearly demonstrated a synergistic effect of scaffold electroconductivity and ES on the enhancement of MSC osteogenic differentiation, particularly on cell-secreted calcium deposition and the upregulation of osteogenic gene markers such as COL I, OC and CACNA1C. These scaffolds hold promise for future clinical applications, including manufacturing of personalized bone TE grafts for transplantation with enhanced maturation/functionality or bioelectronic devices.

Designing Electrical Stimulation Platforms for Neural Cell Cultivation Using Poly(aniline): Camphorsulfonic Acid.

Electrical stimulation is a powerful strategy to improve the differentiation of neural stem cells into neurons. Such an approach can be implemented, in association with biomaterials and nanotechnology, for the development of new therapies for neurological diseases, including direct cell transplantation and the development of platforms for drug screening and disease progression evaluation. Poly(aniline):camphorsulfonic acid (PANI:CSA) is one of the most well-studied electroconductive polymers, capable of directing an externally applied electrical field to neural cells in culture. There are several examples in the literature on the development of PANI:CSA-based scaffolds and platforms for electrical stimulation, but no review has examined the fundamentals and physico-chemical determinants of PANI:CSA for the design of platforms for electrical stimulation. This review evaluates the current literature regarding the application of electrical stimulation to neural cells, specifically reviewing: (1) the fundamentals of bioelectricity and electrical stimulation; (2) the use of PANI:CSA-based systems for electrical stimulation of cell cultures; and (3) the development of scaffolds and setups to support the electrical stimulation of cells. Throughout this work, we critically evaluate the revised literature and provide a steppingstone for the clinical application of the electrical stimulation of cells using electroconductive PANI:CSA platforms/scaffolds.

Production of Blended Poly(acrylonitrile): Poly(ethylenedioxythiophene):Poly(styrene sulfonate) Electrospun Fibers for Neural Applications.

This study describes, for the first time, the successful incorporation of poly(ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) in Poly(acrylonitrile) (PAN) fibers. While electroconductive PEDOT:PSS is extremely challenging to electrospun into fibers. Therefore, PAN, a polymer easy to electrospun, was chosen as a carrier due to its biocompatibility and tunable chemical stability when cross-linked, particularly using strong acids. PAN:PEDOT:PSS blends, prepared from PEDOT:PSS Clevios PH1000, were electrospun into fibers (PH1000) with a diameter of 515 ± 120 nm, which after being thermally annealed (PH1000 24H) and treated with heated sulfuric acid (PH1000 H2SO4), resulted in fibers with diameters of 437 ± 109 and 940 ± 210 nm, respectively. The fibers obtained over the stepwise process were characterized through infra-red/Raman spectroscopy and cyclic voltammetry. The final fiber meshes showed enhanced electroconductivity (3.2 × 10-3 S cm-1, four-points-assay). Fiber meshes biocompatibility was evaluated using fibroblasts and neural stem cells (NSCs) following, respectively, the ISO10993 guidelines and standard adhesion/proliferation assay. NSCs cultured on PH1000 H2SO4 fibers presented normal morphology and high proliferation rates (0.37 day-1 vs. 0.16 day-1 for culture plate), indicating high biocompatibility for NSCs. Still, the low initial NSC adhesion of 7% calls for improving seeding methodologies. PAN:PEDOT:PSS fibers, here successful produced for the first time, have potential applications in neural tissue engineering and soft electronics.

9-Borafluoren-9-yl and diphenylboron tetracoordinate complexes of F- and Cl-substituted 8-quinolinolato ligands: synthesis, molecular and electronic structures, fluorescence and application in OLED devices.

Six new four-coordinate tetrahedral boron complexes, containing 9-borafluoren-9-yl and diphenylboron cores attached to orthogonal fluorine- and chlorine-substituted 8-quinolinolato ligand chromophores, have been synthesised, characterised, and applied as emitters in organic light-emitting diodes (OLEDs). An extensive steady-state and time-resolved photophysical study, in solution and in the solid state, resulted in the first-time report of delayed fluorescence (DF) in solid films of 8-quinolinolato boron complexes. The DF intensity dependence on excitation dose suggests that this emission originates from triplet-triplet annihilation (TTA). Density functional theory (DFT) and time-dependent density functional theory (TDDFT) studies give insight into the ground and excited state geometries, electronic structures, absorption energies, and singlet-triplet gaps in these new organoboron luminophores. Finally, given their highly luminescent behaviour, organic light-emitting diode (OLED) devices were produced using the synthesised organoboron compounds as emissive fluorescent dopants. The best OLED displays green-blue (λmaxEL = 489 nm) electroluminescence with an external quantum efficiency (EQE) of 3.3% and a maximum luminance of 6300 cd m-2.

Modulation of the electrical double layer in metals and conducting polymers.

The electrical double layer (EDL) formed at the interface between various materials and an electrolyte has been studied for a long time. In particular, the EDL formed at metal/electrolyte interfaces is central in electrochemistry, with a plethora of applications ranging from corrosion to batteries to sensors. The discovery of highly conductive conjugated polymers has opened a new area of electronics, involving solution-based or solution-interfaced devices, and in particular in bioelectronics, namely for use in deep-brain stimulation electrodes and devices to measure and condition cells activity, as these materials offer new opportunities to interface cells and living tissues. Here, it is shown that the potential associated to the double layer formed at the interface between either metals or conducting polymers and electrolytes is modified by the application of an electric field along the conductive substrate. The EDL acts as a transducer of the electric field applied to the conductive substrate. This observation has profound implications in the modelling and operation of devices relying on interfaces between conductive materials (metals and conjugated polymers) and electrolytes, which encompasses various application fields ranging from medicine to electronics.

Electronic to ionic transduction of the electric field applied to PEDOT:PSS substrates to the cell cultures on top.

The potential of the electrical double layer (EDL) formed at the interface between cross-linked poly (3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS) and phosphate-buffered saline (PBS) was measured with respect to a reference Ag/AgCl electrode, yielding a value of ca. 300 mV, which corresponds to a work function of 4.9 eV. More importantly, we report that the application of a voltage along the PEDOT:PSS substrate induces a modification of the EDL, which mirrors the potential applied to the PEDOT:PSS underneath. This is translated into an ionic electric field, tangential to the interface that images the electric field applied to the PEDOT:PSS. We propose that this modification of the EDL, via application of the electrical field away from the cell culture medium, is at origin of the neural stem cell response to that field, when cultured on top of PEDOT:PSS. Despite the comparatively low value of the Debye length (estimated around 1 nm) with respect to the much larger cell to PEDOT:PSS surface distance, we believe that the perturbation of the EDL is the likely source of the increase of neuronal differentiation of the neural stem cells. We discuss other possible implications of that EDL modulation.

Stepwise preparation and characterization of molecular wires made of zinc octaethylporphyrin complexes bridged by 4,4'-bipyridine on HOPG.

Molecular-scale devices can be made using a step-by-step procedure, in a controllable and highly versatile way. In this report, we describe the growth of molecular wires (MW) from zinc (II) octaethylporphyrin (ZnOEP) assembled on highly oriented pyrolytic graphite (HOPG) by a step-by-step approach using 4,4'-bipyridine (BP) to bridge the porphyrin units, via coordination of the nitrogen atom to zinc. In order to gain an insight into the molecular self-organization of these wires, we carried out a detailed scanning tunnelling microscopy (STM) analysis of each monolayer, using a solid/liquid interface technique, up to a complete ZnOEP/BP/ZnOEP/BP/ZnOEP-assembled structure. The electrical properties of the MWs were assessed by scanning tunnelling spectroscopy (STS) and by current-sensing atomic force microscopy (CS-AFM), showing an increase of electrical resistance with the length of the MW.

Nanopatterning in Langmuir-Blodgett monolayers of a thermoresponsive double hydrophilic block copolymer studied by atomic force microscopy.

The microphase-separation of Langmuir-Blodgett (LB) monolayers of a rhodamine B (RhB) end-labeled double hydrophilic block copolymer (DHBC), RhB-Poly(N,N-dimethylacrylamide)-b-poly(N,N-diethylacryl-amide) (RhB-PDMA(207)b-PDEA177) and the 1:1 segmental mixture of PDEA and RhB-PDMA homopolymers was followed by AFM. The DHBC LB films revealed a loose distribution of nano-aggregates with variable geometries below the lower critical solution temperature (LCST) of PDEA (32 degrees C) and low surface pressure (3 mN m(-1)). By increasing either the temperature above the LCST of PDEA or the surface pressure beyond the immersion regime of PDMA in the subphase (7 mN m(-1)) a dense nanopatterning was obtained. The absence of a corresponding regular nanopatterning in LB films of mixed homopolymers with the same composition highlights the role of the covalent bonding between PDEA and PDMA on the self-segregation of the two blocks at the air-water interface.

Effect of Electrical Stimulation Conditions on Neural Stem Cells Differentiation on Cross-Linked PEDOT:PSS Films.

The ability to culture and differentiate neural stem cells (NSCs) to generate functional neural populations is attracting increasing attention due to its potential to enable cell-therapies to treat neurodegenerative diseases. Recent studies have shown that electrical stimulation improves neuronal differentiation of stem cells populations, highlighting the importance of the development of electroconductive biocompatible materials for NSC culture and differentiation for tissue engineering and regenerative medicine. Here, we report the use of the conjugated polymer poly(3,4-ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS CLEVIOS P AI 4083) for the manufacture of conductive substrates. Two different protocols, using different cross-linkers (3-glycidyloxypropyl)trimethoxysilane (GOPS) and divinyl sulfone (DVS) were tested to enhance their stability in aqueous environments. Both cross-linking treatments influence PEDOT:PSS properties, namely conductivity and contact angle. However, only GOPS-cross-linked films demonstrated to maintain conductivity and thickness during their incubation in water for 15 days. GOPS-cross-linked films were used to culture ReNcell-VM under different electrical stimulation conditions (AC, DC, and pulsed DC electrical fields). The polymeric substrate exhibits adequate physicochemical properties to promote cell adhesion and growth, as assessed by Alamar Blue® assay, both with and without the application of electric fields. NSCs differentiation was studied by immunofluorescence and quantitative real-time polymerase chain reaction. This study demonstrates that the pulsed DC stimulation (1 V/cm for 12 days), is the most efficient at enhancing the differentiation of NSCs into neurons.

Electrical stimulation of neural-differentiating iPSCs on novel coaxial electroconductive nanofibers.

Neural tissue engineering strategies are paramount to create fully mature neurons, necessary for new therapeutic strategies for neurological diseases or the creation of reliable in vitro models. Scaffolds can provide physical support for these neurons and enable cues for enhancing neural cell differentiation, such as electrical current. Coaxial electrospinning fibers, designed to fulfill neural cell needs, bring together an electroconductive shell layer (PCL-PANI), able to mediate electrical stimulation of cells cultivated on fibers mesh surface, and a soft core layer (PGS), used to finetune fiber diameter (951 ± 465 nm) and mechanical properties (1.3 ± 0.2 MPa). Those dual functional coaxial fibers are electroconductive (0.063 ± 0.029 S cm-1, stable over 21 days) and biodegradable (72% weigh loss in 12 hours upon human lipase accelerated assay). For the first time, the long-term effects of electrical stimulation on induced neural progenitor cells were studied using such fibers. The results show increase in neural maturation (upregulation of MAP2, NEF-H and SYP), up-regulation of glutamatergic marker genes (VGLUT1 - 15-fold) and voltage-sensitive channels (SCN1α - 12-fold, CACNA1C - 32-fold), and a down-regulation of GABAergic marker (GAD67 - 0.09-fold), as detected by qRT-PCR. Therefore, this study suggest a shift from an inhibitory to an excitatory neural cell profile. This work shows that the PGS/PCL-PANI coaxial fibers here developed have potential applications in neural tissue engineering.

PEDOT:PSS-Coated Polybenzimidazole Electroconductive Nanofibers for Biomedical Applications.

Bioelectricity drives several processes in the human body. The development of new materials that can deliver electrical stimuli is gaining increasing attention in the field of tissue engineering. In this work, novel, highly electrically conductive nanofibers made of poly [2,2'-m-(phenylene)-5,5'-bibenzimidazole] (PBI) have been manufactured by electrospinning and then coated with cross-linked poly (3,4-ethylenedioxythiophene) doped with poly (styrene sulfonic acid) (PEDOT:PSS) by spin coating or dip coating. These scaffolds have been characterized by scanning electron microscopy (SEM) imaging and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy. The electrical conductivity was measured by the four-probe method at values of 28.3 S·m-1 for spin coated fibers and 147 S·m-1 for dip coated samples, which correspond, respectively, to an increase of about 105 and 106 times in relation to the electrical conductivity of PBI fibers. Human bone marrow-derived mesenchymal stromal cells (hBM-MSCs) cultured on the produced scaffolds for one week showed high viability, typical morphology and proliferative capacity, as demonstrated by calcein fluorescence staining, 4',6-diamidino-2-phenylindole (DAPI)/Phalloidin staining and MTT [3-(4,5-dimethylthiazol-2-yl)-2,5 diphenyl tetrazolium bromide] assay. Therefore, all fiber samples demonstrated biocompatibility. Overall, our findings highlight the great potential of PEDOT:PSS-coated PBI electrospun scaffolds for a wide variety of biomedical applications, including their use as reliable in vitro models to study pathologies and the development of strategies for the regeneration of electroactive tissues or in the design of new electrodes for in vivo electrical stimulation protocols.

The effect of electrospun scaffolds on the glycosaminoglycan profile of differentiating neural stem cells.

The use of electrospun scaffolds for neural tissue engineering applications allows a closer mimicry of the native tissue extracellular matrix (ECM), important for the transplantation of cells in vivo. Moreover, the role of the electrospun fiber mat topography on neural stem cell (NSC) differentiation remains to be completely understood. In this work REN-VM cells (NSC model) were differentiated on polycaprolactone (PCL) nanofibers, obtained by wet/wet electrospinning, and on flat glass lamellas. The obtained differentiation profile of NSCs was evaluated using immunofluorescence and qPCR analysis. Glycosaminoglycan (GAG) analysis was successfully emplyed to evaluate changes in the GAG profile of differentiating cells through the use of the highly sensitive liquid chromatography-tandem mass/mass spectrometry (LC-MS/MS) method. Our results show that both culture platforms allow the differentiation of REN-VM cells into neural cells (neurons and astrocytes) similarly. Moreover, LC-MS/MS analysis shows changes in the production of GAGs present both in cell cultures and conditioned media samples. In the media, hyaluronic acid (HA) was detected and correlated with cellular activity and the production of a more plastic extracellular matrix. The cell samples evidence changes in chondroitin sulfate (CS4S, CS6S, CS4S6S) and heparan sulfate (HS6S, HS0S), similar to those previously described in vivo studies and possibly associated with the creation of complex structures, such as perineural networks. The GAG profile of differentiating REN-VM cells on electrospun scaffolds was analyzed for the first time. Our results highlight the advantage of using platforms obtain more reliable and robust neural tissue-engineered transplants.

Polyaniline-polycaprolactone fibers for neural applications: Electroconductivity enhanced by pseudo-doping.

Replenishing neurons in patients with neurodegenerative diseases is one of the ultimate therapies for these progressive, debilitating and fatal diseases. Electrical stimulation can improve neuron stem cell differentiation but requires a reliable nanopatterned electroconductive substrate. Potential candidate substrates are polycaprolactone (PCL) - polyaniline:camphorsulfonic acid (PANI:CSA) nanofibers, but their nanobiophysical properties need to be finetuned. The present study investigates the use of the pseudo-doping effect on the optimization of the electroconductivity of these polyaniline-based electrospun nanofibers. This was performed by developing a new solvent system that comprises a mixture of hexafluoropropanol (HFP) and trifluoroethanol (TFE). For the first time, an electroconductivity so high as 0.2 S cm-1 was obtained for, obtained from a TFE:HFP 50/50 vol% solution, while maintaining fiber biocompatibility. The physicochemical mechanisms behind these changes were studied. The results suggest HFP promotes changes on PANI chains conformations through pseudo-doping, leading to the observed enhancement in electroconductivity. The consequences of such change in the nanofabrication of PCL-PANI fibers include an increase in fiber diameter (373 ± 172 nm), a decrease in contact angle (42 ± 3°) and a decrease in Young modulus (1.6 ± 0.5 MPa), making these fibers interesting candidates for neural tissue engineering. Electrical stimulation of differentiating neural stem cells was performed using AC electrical current. Positive effects on cell alignment and gene expression (DCX, MAP2) are observed. The novel optimized platform shows promising applications for (1) building in vitro platforms for drug screening, (2) interfaces for deep-brain electrodes; and (3) fully grown and functional neurons transplantation.

Microphase separation in mixed monolayers of DPPG with a double hydrophilic block copolymer at the air-water interface: a BAM, LSCFM, and AFM study.

Phase separation and interactions in mixed monolayers of dipalmitoylphosphatidylglycerol (DPPG) with the rhodamine B end-labeled double-hydrophilic block copolymer (DHBC), poly(N,N-dimethylacrylamide)-block-poly(N,N-diethylacrylamide) (RhB-PDMA(207)-b-PDEA(177)), was studied at the air-water interface. Surface pressure versus area isotherms indicate that both components behave almost independently. Brewster angle microscopy (BAM) images show a random distribution of liquid condensed (LC) domains of DPPG in an apparent homogeneous matrix of DHBC, excluding the macroscopic phase separation. The laser scanning confocal fluorescence microscopy (LSCFM) of the rhodamine dye at the end of the PDMA chain showed how the DHBC is distributed in Langmuir-Blodgett (LB) mixed monolayers. The high spatial resolution of atomic force microscopy (AFM) combined with the LCSFM images indicates that DHBC incorporates in the expanded phase of DPPG to form mixed domains, being excluded from the condensed regions. Upon compression, nanosized LC domains of DPPG nucleate inside the mixed domains corralled in the nanopatterning of pure DHBC. The negatively charged polar group of DPPG inhibits rhodamine aggregation, while the long polymer chains promote the formation of corralled nanodomains of DPPG in two dimensions.

N-crotylphthalimide.

In the title compound {systematic name: 2-[(E)-but-2-en-1-yl]isoindoline-1,3-dione}, C(12)H(11)NO(2), the phthalimide ring system is essentially planar, with a maximum deviation of 0.008 (1) Å, while the plane of the N-crotyl substituent is orthogonal to the phthalimide ring system, making a dihedral angle of 87.5 (1)°.