Advances on Bioactive Polysaccharides from Medicinal Plants.

In recent decades, the polysaccharides from the medicinal plants have attracted a lot of attention due to their significant bioactivities, such as anti-tumor activity, antioxidant activity, anticoagulant activity, antidiabetic activity, radioprotection effect, anti-viral activity, hypolipidemic and immunomodulatory activities, which make them suitable for medicinal applications. Previous studies have also shown that medicinal plant polysaccharides are non-toxic and show no side effects. Based on these encouraging observations, most researches have been focusing on the isolation and identification of polysaccharides, as well as their bioactivities. A large number of bioactive polysaccharides with different structural features and biological effects from medicinal plants have been purified and characterized. This review provides a comprehensive summary of the most recent developments in physiochemical, structural features and biological activities of bioactive polysaccharides from a number of important medicinal plants, such as polysaccharides from Astragalus membranaceus, Dendrobium plants, Bupleurum, Cactus fruits, Acanthopanax senticosus, Angelica sinensis (Oliv.) Diels, Aloe barbadensis Miller, and Dimocarpus longan Lour. Moreover, the paper has also been focused on the applications of bioactive polysaccharides for medicinal applications. Recent studies have provided evidence that polysaccharides from medicinal plants can play a vital role in bioactivities. The contents and data will serve as a useful reference material for further investigation, production, and application of these polysaccharides in functional foods and therapeutic agents.

Impact of health claims in prebiotic-enriched breads on purchase intent, emotional response and product liking.

The impact of health claims on purchase intent, emotional response and liking has never been previously reported. In this study, prebiotic-enriched bread was used as a model functional food. Purchase intent, emotional response and liking were investigated in three phases: (1) focus groups were used to gauge consumer perception of health claims and functional foods, (2) the impact of health claims on purchase intent and emotional responses were measured using an online survey (n = 122) and (3) hedonic ratings on bread rolls presented with or without any associated claims were obtained (n = 100). A cluster analysis of the purchase intent data identified two clusters of consumers who were either receptive or non-receptive to health claims. Receptive and non-receptive consumers significantly differed in the emotions they reported with respect to the claims. The hedonic ratings did not significantly differ between the breads tasted with or without health claims.

Monitoring the stability of heparin: NMR evidence for the rearrangement of sulfated iduronate in phosphate buffer.

Heparin, a major anticoagulant drug, comprises a complex mixture of motifs. Heparin is isolated from natural sources while being subjected to a variety of conditions but the detailed effects of these on heparin structure have not been studied in depth. Therefore, the result of exposing heparin to a range of buffered environments, ranging pH values from 7 to 12, and temperatures of 40, 60 and 80 °C were examined. There was no evidence of significant N-desulfation or 6-O-desulfation in glucosamine residues, nor of chain scission, however, stereochemical re-arrangement of α-L-iduronate 2-O-sulfate to α-L-galacturonate residues occurred in 0.1 M phosphate buffer at pH 12/80 °C. The results confirm the relative stability of heparin in environments like those during extraction and purification processes; on the other hand, the sensitivity of heparin to pH 12 in buffered solution at high temperature is highlighted, providing an important insight for heparin manufacturers.

Extended Fujita approach to the molecular weight distribution of polysaccharides and other polymeric systems.

In 1962 H. Fujita (H. Fujita, Mathematical Theory of Sedimentation Analysis, Academic Press, New York, 1962) examined the possibility of transforming a quasi-continuous distribution g(s) of sedimentation coefficient s into a distribution f(M) of molecular weight M for linear polymers using the relation f(M)=g(s)·(ds/dM) and showed that this could be done if information about the relation between s and M is available from other sources. Fujita provided the transformation based on the scaling relation s=κ(s)M(0.5), where κ(s) is taken as a constant for that particular polymer and the exponent 0.5 essentially corresponds to a randomly coiled polymer under ideal conditions. This method has been successfully applied to mucus glycoproteins (S.E. Harding, Adv. Carbohyd. Chem. Biochem. 47 (1989) 345-381). We now describe an extension of the method to general conformation types via the scaling relation s=κM(b), where b=0.4-0.5 for a coil, ∼0.15-0.2 for a rod and ∼0.67 for a sphere. We give examples of distributions f(M) versus M obtained for polysaccharides from SEDFIT derived least squares g(s) versus s profiles (P. Schuck, Biophys. J. 78 (2000) 1606-1619) and the analytical derivative for ds/dM performed with Microcal ORIGIN. We also describe a more direct route from a direct numerical solution of the integral equation describing the molecular weight distribution problem. Both routes give identical distributions although the latter offers the advantage of being incorporated completely within SEDFIT. The method currently assumes that solutions behave ideally: sedimentation velocity has the major advantage over sedimentation equilibrium in that concentrations less than 0.2mg/ml can be employed, and for many systems non-ideality effects can be reasonably ignored. For large, non-globular polymer systems, diffusive contributions are also likely to be small.

Influence of cations, pH and dispersed phases on pectin emulsification properties.

The cooperativity of six cations (Ca2+, Mg2+, Zn2+, Al3+, Cr3+ and Fe3+), three pectins (sugar beet, high and low methyl esterified), three dispersed phases (medium chain triglycerides (MCT), orange oil and hexadecane), time (30 days) and pH (2.0 and 6.0) has been investigated in the formation and stability against coarsening of oil-in-water emulsions. Cations generally influenced emulsion stability in the following order (most stable) Ca2+ â€‹> â€‹Mg2+ â€‹> â€‹Al3+ â€‹> â€‹Cr3+ â€‹> â€‹Zn2+ â€‹> â€‹Fe3+ (least stable). This order largely coincided with that of the strength of pectin-cation interactions showing that the higher the affinity of cation for pectin the less stable the emulsion. More stable emulsions were formed with sugar beet pectin, which was also unresponsive to the presence of cations, followed by high- and then low-methyl esterified samples. At pH 2.0 all pectins showed their best emulsification performance whereas shifting pH to 6.0 severely impaired emulsification capacity and longer term stability against droplet growth. Smaller droplets were created with hexadecane under all conditions studied followed by MCT and orange oil in agreement with their aqueous solubilities. The present results advance our understanding of the stabilisation of emulsions using pectin and allow us to tailor their functionality for applications in food, pharmaceutical and biomedical industries.

Hydrolytic Degradation of Heparin in Acidic Environments: Nuclear Magnetic Resonance Reveals Details of Selective Desulfation.

Heparin is a complex glycosaminoglycan, derived mainly from pig mucosa, used therapeutically for its anticoagulant activity. Yet, owing largely to the chain complexity, the progressive effects of environmental conditions on heparin structure have not been fully described. A systematic study of the influence of acidic hydrolysis on heparin chain length and substitution has therefore been conducted. Changes in the sulfation pattern, monitored via 2D NMR, revealed initial de-N-sulfation of the molecule (pH 1/ 40 °C) and unexpectedly identified the secondary sulfate of iduronate as more labile than the 6-O-sulfate of glucosamine residues under these conditions (pH 1/ 60 °C). Additionally, the loss of sulfate groups, rather than depolymerization, accounted for most of the reduction in molecular weight. This provides an alternative route to producing partially 2-O-de-sulfated heparin derivatives that avoids using conventional basic conditions and may be of value in the optimization of processes associated with the production of heparin pharmaceuticals.

Structure and heterogeneity of gliadin: a hydrodynamic evaluation.

A study of the heterogeneity and conformation in solution [in 70% (v/v) aq. ethanol] of gliadin proteins from wheat was undertaken based upon sedimentation velocity in the analytical ultracentrifuge, analysis of the distribution coefficients and ellipsoidal axial ratios assuming quasi-rigid particles, allowing for a range of plausible time-averaged hydration values. All classical fractions (alpha, gamma, omega(slow), omega(fast)) show three clearly resolved components. Based on the weight-average sedimentation coefficient for each fraction and a weight-average molecular weight from sedimentation equilibrium and/or cDNA sequence analysis, all the proteins are extended molecules with axial ratios ranging from ~10 to 30 with alpha appearing the most extended and gamma the least.

The identification and characterisation of novel bioactive peptides derived from porcine liver.

Bioactive peptides (BAPs) can be derived from a variety of sources; these could be from dietary proteins which are then broken down in the gastrointestinal tract to release BAPs, or they can be isolated from various sources ex vivo. Sources include plant-based proteins such as soy, and chickpeas, and animal proteins from waste from the meat industry and from fish skin. Bioinformatics is also a useful approach to assess the peptides released from digests due to the great number of possible sequences that can be isolated from proteins. Therefore, an in silico analysis of peptides could potentially lead to a more rapid discovery of BAPs. This article investigates a "crude" liver peptide mixture derived from papain hydrolysis of porcine liver and purified peptides derived from the hydrolysates following HPLC fractionation and in silico digestion of the host proteins identified using LC-MS/MS. This allowed the identification of two proteins (cytosol aminopeptidase and haemoglobin subunit alpha) present in the "crude" mixture after LC-MS/MS. In silico hydrolysis of these proteins identified that several peptides were predicted to be both present in the crude mixture using the BIOPEP database and to have potential bioactivity using the Peptide Ranker tool. Peptides (FWG, MFLG and SDPPLVFVG) with the greatest potential bioactivity and which had not previously been reported in the literature were then synthesised. The results indicated that the predicted bioactivity of the synthetic peptides would likely include antioxidant activity. FWG and MFLG derived from the in silico papain hydrolysis of cytosol aminopeptidase showed activity better or comparable to Trolox in the Oxygen Radical Absorbance Capacity (ORAC) assay. The use of these in silico tools, alongside a robust range of biochemical assays which cover a wider range of bioactivities would be a way of improving the discovery of novel bioactive peptides.

An Auristatin nanoconjugate targeting CXCR4+ leukemic cells blocks acute myeloid leukemia dissemination.

BACKGROUND: Current acute myeloid leukemia (AML) therapy fails to eliminate quiescent leukemic blasts in the bone marrow, leading to about 50% of patient relapse by increasing AML burden in the bone marrow, blood, and extramedullar sites. We developed a protein-based nanoparticle conjugated to the potent antimitotic agent Auristatin E that selectively targets AML blasts because of their CXCR4 receptor overexpression (CXCR4+) as compared to normal cells. The therapeutic rationale is based on the involvement of CXCR4 overexpression in leukemic blast homing and quiescence in the bone marrow, and the association of these leukemic stem cells with minimal residual disease, dissemination, chemotherapy resistance, and lower patient survival. METHODS: Monomethyl Auristatin E (MMAE) was conjugated with the CXCR4 targeted protein nanoparticle T22-GFP-H6 produced in E. coli. Nanoconjugate internalization and in vitro cell viability assays were performed in CXCR4+ AML cell lines to analyze the specific antineoplastic activity through the CXCR4 receptor. In addition, a disseminated AML animal model was used to evaluate the anticancer effect of T22-GFP-H6-Auristatin in immunosuppressed NSG mice (n = 10/group). U of Mann-Whitney test was used to consider if differences were significant between groups. RESULTS: T22-GFP-H6-Auristatin was capable to internalize and exert antineoplastic effects through the CXCR4 receptor in THP-1 and SKM-1 CXCR4+ AML cell lines. In addition, repeated administration of the T22-GFP-H6-Auristatin nanoconjugate (9 doses daily) achieves a potent antineoplastic activity by internalizing specifically in the leukemic cells (luminescent THP-1) to selectively eliminate them. This leads to reduced involvement of leukemic cells in the bone marrow, peripheral blood, liver, and spleen, while avoiding toxicity in normal tissues in a luminescent disseminated AML mouse model. CONCLUSIONS: A novel nanoconjugate for targeted drug delivery of Auristatin reduces significantly the acute myeloid leukemic cell burden in the bone marrow and blood and blocks its dissemination to extramedullar organs in a CXCR4+ AML model. This selective drug delivery approach validates CXCR4+ AML cells as a target for clinical therapy, not only promising to improve the control of leukemic dissemination but also dramatically reducing the severe toxicity of classical AML therapy.

Fluorescent Dye Labeling Changes the Biodistribution of Tumor-Targeted Nanoparticles.

Fluorescent dye labeling is a common strategy to analyze the fate of administered nanoparticles in living organisms. However, to which extent the labeling processes can alter the original nanoparticle biodistribution has been so far neglected. In this work, two widely used fluorescent dye molecules, namely, ATTO488 (ATTO) and Sulfo-Cy5 (S-Cy5), have been covalently attached to a well-characterized CXCR4-targeted self-assembling protein nanoparticle (known as T22-GFP-H6). The biodistribution of labeled T22-GFP-H6-ATTO and T22-GFP-H6-S-Cy5 nanoparticles has been then compared to that of the non-labeled nanoparticle in different CXCR4+ tumor mouse models. We observed that while parental T22-GFP-H6 nanoparticles accumulated mostly and specifically in CXCR4+ tumor cells, labeled T22-GFP-H6-ATTO and T22-GFP-H6-S-Cy5 nanoparticles showed a dramatic change in the biodistribution pattern, accumulating in non-target organs such as liver or kidney while reducing tumor targeting capacity. Therefore, the use of such labeling molecules should be avoided in target and non-target tissue uptake studies during the design and development of targeted nanoscale drug delivery systems, since their effect over the fate of the nanomaterial can lead to considerable miss-interpretations of the actual nanoparticle biodistribution.

Caffeine release and absorption from caffeinated gums.

The objectives of this study were to estimate the impact of chewing time on caffeine release from gum and to understand caffeine pharmacokinetics. Caffeine release increased with chewing time (2 min < 5 min < 10 min). Furthermore, two plasma caffeine concentration peaks were observed suggesting that caffeine absorption occurs both through the oral mucosa and gastrointestinal tract. This is of practical relevance to maximise caffeine doses and to synchronise effort with peak caffeine concentration.

Pectic polysaccharides from Biophytum petersianum Klotzsch, and their activation of macrophages and dendritic cells.

The Malian medicinal plant Biophytum petersianum Klotzsch (Oxalidaceae) is used as a treatment against various types of illnesses related to the immune system, such as joint pains, inflammations, fever, malaria, and wounds. A pectic polysaccharide obtained from a hot water extract of the aerial parts of B. petersianum has previously been reported to consist of arabinogalactans types I and II (AG-I and AG-II), probably linked to a rhamnogalacturonan backbone. We describe here further structural characteristics of the main polysaccharide fraction (BP1002) and fractions obtained by enzymatic degradations using endo-alpha-d-(1-->4)-polygalacturonase (BP1002-I to IV). The results indicate that in addition to previously reported structures, rhamnogalacturan type II and xylogalacturonan areas appear to be present in the pectic polymer isolated from the plant. Atomic force microscopy confirmed the presence of branched structures, as well as a polydisperse nature. We further tested whether the BP1002 main fraction or the enzymatically degraded products could induce immunomodulating activity through stimulation of subsets of leukocytes. We found that macrophages and dendritic cells were activated by BP1002 fractions, while there was little response of T cells, B cells, and NK cells. The enzymatic treatment of the BP1002 main fraction gave important information on the structure-activity relations. It seems that the presence of rhamnogalacturonan type I is important for the bioactivity, as the bioactivity decreases with the decreased amounts of rhamnose, galactose, and arabinose. The demonstration of bioactivity by the plant extracts might indicate the mechanisms behind the traditional medical use of the plant.

Unconventional methyl galactan synthesized via the thexyldimethylsilyl intermediate: preparation, characterization, and properties.

Reaction of a beta-(1 --> 4) linked galactan with TDMS chloride followed by methylation and desilylation yields methyl galactans with unconventional functionalization patterns. The products were characterized via FTIR and NMR of the intact polymer and by CE after controlled depolymerization. A TDMS-derivatized methyl galactan contains differently methylated secondary hydroxyl groups. SEC and analytical ultracentrifugation showed a consistent decrease in the molecular weight after the consecutive reaction steps. Biological studies revealed that the methyl galactans are less active in complement fixation assays as compared with a 3-O-methyl galactan-enriched polysaccharide fraction isolated from Acanthus ebracteatus.

Evaluation of the mucoadhesive properties of chitosan nanoparticles prepared using different chitosan to tripolyphosphate (CS:TPP) ratios.

Mucoadhesive molecules such as chitosan, can allow targeting of a particular tissue to prolong residence time and subsequently improve bioavailability. The purpose of this study was to investigate chitosan-tripolyphosphate (CS:TPP) nanoparticles and to evaluate the interaction between nanoparticles of different CS:TPP ratios with mucin using viscosity, particle size analysis and ζ-potential. For all CS:TPP ratios examined, a minimum value of viscosity was reached for a 3:1 CS:TPP ratio, however chitosan nanoparticles at this ratio were not stable (<+30 mV), whereas a CS:TPP ratio of 4:1 displayed the strongest interaction. This suggests a minimum CS:TPP ratio of 4:1 is required to produce stable nanoparticles able to form strong interactions, which is consistent with a greater mucin binding efficiencies at CS:TPP ratios of 4:1 and higher, which were quantified using a colorimetric assay. Further analysis of similar systems could lead potentially to tuneable chitosan nanoparticles for specific applications.

Structural and rheological studies of a polysaccharide mucilage from lacebark leaves (Hoheria populnea A. Cunn.).

A water-soluble mucilage extracted from the leaves of Hoheria populnea was chemically and physically studied. Monosaccharide composition and linkages were determined by high performance anion exchange chromatography (HPAEC), gas chromatography-mass spectrometry (GC-MS) and nuclear magnetic resonance (NMR) spectroscopy. Lacebark mucilage was composed of rhamnose, galactose, galacturonic acid and glucuronic acid (2:1:2:1). Proton and 13C NMR spectroscopy, and linkage analysis, revealed a predominantly rhamnogalacturonan I-type (RG I-type) structure comprising of a backbone of →4]-α-D-GalpA-[1→2]-α-L-Rhap-[1→. Data indicated the mucilage likely comprises of a polymer containing several structurally discrete domains or possibly more than one discrete polymer. One domain contains a RG I-type backbone with branching at O-3 of GalpA residues to terminal ß-D-GlcpA residues, another similarly contains a RG I-type backbone but is branched at O-4 of the Rhap residues to terminal GalpA residues or oligosaccharides containing α-linked 4-Galp and terminal GalpA residues. A possible third domain contains contiguous 2-Rhap residues, some branched at O-3. Hydrated mucilage exhibited pseudoplastic flow behaviour and viscoelastic properties of an entangled biopolymer network. These rheological behaviours were only slightly affected by pH and may prove advantageous in potential end-product applications including oral pharmaceuticals or as a food ingredient.

Comparative Study of Diethylaminoethyl-Chitosan and Methylglycol-Chitosan as Potential Non-Viral Vectors for Gene Therapy.

In this paper, we compared the transfection efficiency and cytotoxicity of methylglycol-chitosan (MG-CS) and diethylaminoethyl-chitosan (DEAE-CSI and DEAE-CSII with degrees of substitution of 1.2 and 0.57, respectively) to that of Lipofectamine (used as a reference transfection vector). MG-CS contains quaternary amines to improve DNA binding, whereas the DEAE-CS exhibits pH buffering capability that would ostensibly enhance transfection efficiency by promoting endosomal escape. Gel retardation assays showed that both DEAE-CS and MG-CS bound to DNA at a polysaccharide:DNA mass ratio of 2:1. In Calu-3 cells, the DNA transfection activity was significantly better with MG-CS than with DEAE-CS, and the efficiency improved with increasing polysaccharide:DNA ratios. By contrast, the efficiency of DEAE-CSI and DEAE-CSII was independent of the polysaccharide:DNA ratio. Conversely, in the transfection-recalcitrant JAWSII cells, both Lipofectamine and MG-CS showed significantly lower DNA transfection activity than in Calu-3 cells, whereas the efficiency of DEAE-CSI and DEAE-CSII was similar in both cell lines. The toxicity of DEAE-CS increased with increasing concentrations of the polymer and its degree of substitution, whereas MG-CS demonstrated negligible cytotoxicity, even at the highest concentration studied. Overall, MG-CS proved to be a more efficient and less toxic transfection agent when compared to DEAE-CS.

Designing chitosan-tripolyphosphate microparticles with desired size for specific pharmaceutical or forensic applications.

Chitosan (CS) is a natural cationic polymer obtained by the partial N-deacetylation of chitin. Chitosan microparticles can be prepared by cross-linking with tripolyphosphate (TPP) via the ionic interaction between positively charged amino groups (CS) and negatively charged counter ions (TPP). This can be controlled by the charge density of CS and TPP, which depend on the pH and ionic strength of the solution. The purpose of this study is to investigate the combined effects of three independent variables (pH, ionic strength and CS:TPP ratio) on three important physico-chemical properties (viscosity, zeta potential and particle size) during the preparation of microparticles. CS:TPP microparticles were prepared using experimental design and equations were generated and used to predict relative viscosity, zeta potential and particle size under different conditions. This gives us the ability to design tuneable CS-TPP microparticles with desired size for specific pharmaceutical or forensic applications e.g. latent fingerprint visualisation.

The physicochemical characterisation of pepsin degraded pig gastric mucin.

Mucins are the main macromolecular components of the mucus secretions that cover the oral cavity, gastrointestinal and urogenital tracts of animals. The properties of the mucus secretions are therefore directly correlated with the physicochemical properties of mucin glycoproteins. In this study, mucins were obtained from pig gastric mucous after digestion with pepsin at 37°C for 4h, these mucins were characterised in terms of compositional and hydrodynamic properties. Compositional analysis showed that this mucin contains protein (15%), carbohydrates (55%) of which the constituents are: fucose (4%), galactose (9%), glucosamine (55%), glucosamine (33%) and sialic acid (2%). The latter component gives the mucin polymer a pH-dependant negative charge, with a ζ-potential of -3mV at pH 1.2 up to -11mV at pH 7.4. The weight average molar mass was ∼1×10(6)g/mol and intrinsic viscosity was ∼0.42dL/g although there was a small pH dependency due to the polyelectrolyte behavior of the polymer. The measurements of viscosity versus shear rate showed shear thinning behavior and the critical overlap concentration was determined to be 10-11% w/v indicating a compact structure. Knowledge of these properties is fundamental to the understanding interactions of mucins, with for example, novel drug delivery systems.

Solution conformation and flexibility of capsular polysaccharides from Neisseria meningitidis and glycoconjugates with the tetanus toxoid protein.

The structural integrity of meningococcal native, micro-fluidized and activated capsular polysaccharides and their glycoconjugates - in the form most relevant to their potential use as vaccines (dilute solution) - have been investigated with respect to their homogeneity, conformation and flexibility. Sedimentation velocity analysis showed that the polysaccharide size distributions were generally bimodal with some evidence for higher molar mass forms at higher concentration. Weight average molar masses Mw where lower for activated polysaccharides. Conjugation with tetanus toxoid protein however greatly increased the molar mass and polydispersity of the final conjugates. Glycoconjugates had an approximately unimodal log-normal but broad and large molar mass profiles, confirmed by sedimentation equilibrium "SEDFIT MSTAR" analysis. Conformation analysis using HYDFIT (which globally combines sedimentation and viscosity data), "Conformation Zoning" and Wales-van Holde approaches showed a high degree of flexibility - at least as great as the unconjugated polysaccharides, and very different from the tetanus toxoid (TT) protein used for the conjugation. As with the recently published finding for Hib-TT complexes, it is the carbohydrate component that dictates the solution behaviour of these glycoconjugates, although the lower intrinsic viscosities suggest some degree of compaction of the carbohydrate chains around the protein.