Accelerating Plasma Mirrors to Investigate the Black Hole Information Loss Paradox.

The question of whether Hawking evaporation violates unitarity, and therefore results in the loss of information, has remained unresolved since Hawking's seminal discovery. To date, the investigations have remained mostly theoretical since it is almost impossible to settle this paradox through direct astrophysical black hole observations. Here, we point out that relativistic plasma mirrors can be accelerated drastically and stopped abruptly by impinging intense x-ray pulses on solid plasma targets with a density gradient. This is analogous to the late time evolution of black hole Hawking evaporation. A conception of such an experiment is proposed and a self-consistent set of physical parameters is presented. Critical issues, such as how the black hole unitarity may be preserved, can be addressed through the entanglement between the analog Hawking radiation photons and their partner modes.

Design and properties of a coherent amplifying network laser.

The coherent amplifying network laser is based on an array of thousands of active laser fibers coherently combined to generate high peak-power pulses at a high repetition rate. To achieve such a massive network, new combination architectures are presented here. They are based on implementing a spherical array of amplifying fibers, thus removing the need for transport fibers from the initial scheme. These designs present an advantage in terms of scalability leading to significant reduction of the temporal fluctuations compared to those of a conventional high peak-power laser. Noise evolution with fiber number is calculated using a perturbative analysis of each channel parameters (phase, signal intensity, beam profile).

Three-dimensional modeling of CPA to the multimillijoule level in tapered Yb-doped fibers for coherent combining systems.

We developed a three-dimensional numerical model of Large-Mode-Area chirped pulse fiber amplifiers which includes nonlinear beam propagation in nonuniform multimode waveguides as well as gain spectrum dynamics in quasi-three-level active ions. We used our model in tapered Yb-doped fiber amplifiers and showed that single-mode propagation is maintained along the taper even in the presence of strong Kerr nonlinearity and saturated gain, allowing extraction of up to 3 mJ of output energy in 1 ns pulse. Energy scaling and its limitation as well as the influence of fiber taper bending and core irregularities on the amplifier performance were studied. We also investigated numerically the capabilities for compression and coherent combining of up to 36 perturbed amplifying channels and showed more than 70% combining efficiency, even with up to 11% of high-order modes in individual channels.

Terahertz time-domain imaging of hidden defects in wooden artworks: application to a Russian icon painting.

We use terahertz time-domain imaging and time-of-flight tomography to examine subsurface defects in an early-19th-century Russian icon painting. In the transmission geometry, we distinguish between native wood and higher-absorption knotted wood. In reflection, we identify a void in the wood filled with foreign filler material. By using time-of-flight tomographic analysis, we ascertain the depth of burial of the defects. This information helps us to identify the cause of surface faults in the painting, thus allowing the conservators to choose an adequate restoration strategy.

Sub-surface terahertz imaging through uneven surfaces: visualizing Neolithic wall paintings in Çatalhöyük.

Pulsed terahertz imaging is being developed as a technique to image obscured mural paintings. Due to significant advances in terahertz technology, portable systems are now capable of operating in unregulated environments and this has prompted their use on archaeological excavations. August 2011 saw the first use of pulsed terahertz imaging at the archaeological site of Çatalhöyük, Turkey, where mural paintings dating from the Neolithic period are continuously being uncovered by archaeologists. In these particular paintings the paint is applied onto an uneven surface, and then covered by an equally uneven surface. Traditional terahertz data analysis has proven unsuccessful at sub-surface imaging of these paintings due to the effect of these uneven surfaces. For the first time, an image processing technique is presented, based around Gaussian beam-mode coupling, which enables the visualization of the obscured painting.

Terahertz deconvolution.

The ability to retrieve information from different layers within a stratified sample using terahertz pulsed reflection imaging and spectroscopy has traditionally been resolution limited by the pulse width available. In this paper, a deconvolution algorithm is presented which circumvents this resolution limit, enabling deep sub-wavelength and sub-pulse width depth resolution. The algorithm is explained through theoretical investigation, and demonstrated by reconstructing signals reflected from boundaries in stratified materials that cannot be resolved directly from the unprocessed time-domain reflection signal. Furthermore, the deconvolution technique has been used to recreate sub-surface images from a stratified sample: imaging the reverse side of a piece of paper.

High-harmonic generation from plasma mirrors at kilohertz repetition rate.

We report the first demonstration of high-harmonic generation from plasma mirrors at a 1 kHz repetition rate. Harmonics up to nineteenth order are generated at peak intensities close to 10¹8 W/cm² by focusing 1 mJ, 25 fs laser pulses down to 1.7 µm FWHM spot size without any prior wavefront correction onto a moving target. We minimize target surface motion with respect to the laser focus using online interferometry to ensure reproducible interaction conditions for every shot and record data at 1 kHz with unprecedented statistics. This allows us to unambiguously identify coherent wake emission as the main generation mechanism.

High-order harmonic generation from solid targets with 2 mJ pulses.

Harmonics up to the 18th order are generated from solid targets by focusing 2 mJ, 50 fs pulses at 800 nm to a spot size of 1.7 µm (FWHM). To our knowledge, this is the first demonstration of high-harmonic generation with a very short focal length paraboloid (f/1.4) and kilohertz laser system. The harmonics have a low divergence (<4°) compared to the driving beam and conversion efficiencies (>10(-7) per harmonic) comparable to gas harmonics. No contrast enhancement techniques are employed, and the system is capable of operating at 500 Hz.

Pair creation in QED-strong pulsed laser fields interacting with electron beams.

QED effects are known to occur in a strong laser pulse interaction with a counterpropagating electron beam, among these effects being electron-positron pair creation. We discuss the range of laser pulse intensities of J≥5×10(22) W/cm2 combined with electron beam energies of tens of GeV. In this regime multiple pairs may be generated from a single beam electron, some of the newborn particles being capable of further pair production. Radiation backreaction prevents avalanche development and limits pair creation. The system of integro-differential kinetic equations for electrons, positrons and γ photons is derived and solved numerically.

Quasimonoenergetic electron beams with relativistic energies and ultrashort duration from laser-solid interactions at 0.5 kHz.

We investigate the production of electron beams from the interaction of relativistically-intense laser pulses with a solid-density SiO(2) target in a regime where the laser pulse energy is approximately mJ and the repetition rate approximately kHz. The electron beam spatial distribution and spectrum were investigated as a function of the plasma scale length, which was varied by deliberately introducing a moderate-intensity prepulse. At the optimum scale length of lambda/2, the electrons are emitted in a collimated beam having a quasimonoenergetic distribution that peaked at approximately 0.8 MeV. A highly reproducible structure in the spatial distribution exhibits an evacuation of electrons along the laser specular direction and suggests that the electron beam duration is comparable to that of the laser pulse. Particle-in-cell simulations which are in good agreement with the experimental results offer insights on the acceleration mechanism by the laser field.

Generation of hard X-rays using an ultrafast fiber laser system.

We report the first hard X-ray source driven by a femtosecond fiber laser. The high energy fiber CPA system incorporated a 65mum LMA fiber amplifying stage which provided 300-fs recompressed pulses and diffraction limited beam quality with M(2) < 1.07. A deformable mirror was used to optimize the wavefront and the spot size was focused down to 2.3 mum with an f/1.2 paraboloidal mirror. 50muJ was deposited on the nickel target with 2x10(15)-W/cm(2) focal intensity and a distinctive Ni K(alpha)-line (7.48 keV) emission was measured with 5x10(-8) energy conversion efficiency.

In situ monitoring of second-harmonic generation in human corneas to compensate for femtosecond laser pulse attenuation in keratoplasty.

The application of femtosecond lasers in corneal transplant surgery requires high pulse energies to compensate for the strong optical scattering in pathological corneas. However, excessive energies deteriorate the quality of the incisions. The aim of this study is to demonstrate the dependence of side effects on local radiant exposure, numerical aperture, and tissue properties, to quantify the penetration depth of the laser for individual corneas, and to provide a method for optimizing the energy in the volume of the cornea. We examine histological and ultrastructural sections of clear and edematous corneas with perforating and lamellar incisions performed at different pulse energies. We demonstrate that the augmented energies in edematous corneas may result in unwanted side effects even when using high numerical apertures. The dependence of the laser beam penetration depth on pulse energy is evaluated by histology and an exponential decrease is observed. We show that the penetration length can be determined by evaluating the backscattered second-harmonic emission associated with the nonlinear optical properties of the tissue. This approach represents a noninvasive method for the in situ quantification of the laser beam attenuation, enabling us to adapt the pulse energy accordingly. Experiments using adapted energies show that the side effects are minimized.

Emission and its back-reaction accompanying electron motion in relativistically strong and QED-strong pulsed laser fields.

The emission from an electron in the field of a relativistically strong laser pulse is analyzed. At pulse intensities of J>or=2x10(22) W/cm(2) the emission from counterpropagating electrons is modified by the effects of quantum electrodynamics (QED), as long as the electron energy is sufficiently high: E>or=1 GeV . The radiation force experienced by an electron is for the first time derived from the QED principles and its applicability range is extended toward the QED-strong fields.

Quasi-flat-top frequency-doubled Nd:glass laser for pumping of high-power Ti:sapphire amplifiers at a 0.1 Hz repetition rate.

A Nd:glass laser based on a novel design delivers up to 120 J energy pulses with a quasi-flat-top spatial profile at a 0.1 Hz repetition rate. The laser output is frequency-doubled with 50% efficiency and used to pump Ti:sapphire amplifiers. The developed design is perspective for use in the currently contemplated next step in ultra-high-intensity laser development.

Superresolved femtosecond laser ablation.

The determinist behavior of the femtosecond ablation process allows morphing features well under the diffraction limit by utilizing the thresholding effect, down to the nanometer scale. Because there are a vast range of applications where scaling down the size of the features is a major concern, we investigate the use of superresolving pupil plane filters. As is well known, these filters redistribute the focused optical intensity for a narrower bright spot and, as a trade-off, increase the sidelobes. However, this drawback can be rendered insignificant if all the outer optical power is kept under the determinist threshold value. Two types of pure absorbing binary filter have been tried, giving credence to a size reduction of the ablations in fused silica.

All-reflective high fringe contrast autocorrelator for measurement of ultrabroadband optical pulses.

We describe an all-reflective interferometric autocorrelator designed to measure ultrabroadband optical pulses in the UV through IR spectral regions. By carefully choosing the device geometry we are able to obtain approximations for the nonlinear autocorrelation functions that reduce computation times to values acceptable for use in iterative pulse reconstruction schemes. We describe the optical design, autocorrelation functions, and present proof-of-principle experimental results measuring 20.6 fs pulses with a transform limit of 9.6 fs.

Demonstration of fiber-laser-produced plasma source and application to efficient extreme UV light generation.

Efficient generation of extreme UV (EUV) light at lambda = 13.5 nm from a bulk Sn target has been demonstrated by using a fiber laser. The conversion efficiency from the 1064 nm IR to the EUV was measured to be around 0.9% into 2pi steradians within a 2% bandwidth. To the best of our knowledge, this is the first time an all-fiber system was used to generate EUV or soft x rays.

Directly diode-pumped Yb:KY(WO(4))(2) regenerative amplifiers.

Two Yb(3+) -doped KY(WO(4))(2) regenerative amplifiers, one end pumped by two 1.6-W single-stripe diodes at 940 nm and the other side pumped by one 20-W diode bar at 980 nm, are demonstrated. When the regenerative amplifiers are injected, 40-muJ , 400-fs and 65-muJ , 460-fs pulses at a 1-kHz repetition rate are obtained following compression from the end- and side-pumped amplifiers, respectively.