G-protein signaling through tubby proteins.

Dysfunction of the tubby protein results in maturity-onset obesity in mice. Tubby has been implicated as a transcription regulator, but details of the molecular mechanism underlying its function remain unclear. Here we show that tubby functions in signal transduction from heterotrimeric GTP-binding protein (G protein)-coupled receptors. Tubby localizes to the plasma membrane by binding phosphatidylinositol 4,5-bisphosphate through its carboxyl terminal "tubby domain." X-ray crystallography reveals the atomic-level basis of this interaction and implicates tubby domains as phosphorylated-phosphatidyl- inositol binding factors. Receptor-mediated activation of G protein alphaq (Galphaq) releases tubby from the plasma membrane through the action of phospholipase C-beta, triggering translocation of tubby to the cell nucleus. The localization of tubby-like protein 3 (TULP3) is similarly regulated. These data suggest that tubby proteins function as membrane-bound transcription regulators that translocate to the nucleus in response to phosphoinositide hydrolysis, providing a direct link between G-protein signaling and the regulation of gene expression.

HuD RNA recognition motifs play distinct roles in the formation of a stable complex with AU-rich RNA.

Human neuron-specific RNA-binding protein HuD belongs to the family of Hu proteins and consists of two N-terminal RNA recognition motifs (RRM1 and -2), a hinge region, and a C-terminal RRM (RRM3). Hu proteins can bind to AU-rich elements in the 3' untranslated regions of unstable mRNAs, causing the stabilization of certain transcripts. We have studied the interaction between HuD and prototype mRNA instability elements of the sequence UU(AUUU)(n)AUU using equilibrium methods and real-time kinetics (surface plasmon resonance using a BIACORE). We show that a single molecule of HuD requires at least three AUUU repeats to bind tightly to the RNA. Deletion of RRM1 reduced the K(d) by 2 orders of magnitude and caused a decrease in the association rate and a strong increase in the dissociation rate of the RNA-protein complex, as expected when a critical RNA-binding domain is removed. In contrast, deletion of either RRM2 or -3, which only moderately reduced the affinity, caused marked increases in the association and dissociation rates. The slower binding and stabilization of the complex observed in the presence of all three RRMs suggest that a change in the tertiary structure occurs during binding. The individual RRMs bind poorly to the RNA (RRM1 binds with micromolar affinity, while the affinities of RRM2 and -3 are in the millimolar range). However, the combination of RRM1 and either RRM2 or RRM3 in the context of the protein allows binding with a nanomolar affinity. Thus, the three RRMs appear to cooperate not only to increase the affinity of the interaction but also to stabilize the formed complex. Kinetic effects, similar to those described here, could play a role in RNA binding by many multi-RRM proteins and may influence the competition between proteins for RNA-binding sites and the ability of RNA-bound proteins to be transported intracellularly.

Surface plasmon resonance kinetic studies of the HIV TAR RNA kissing hairpin complex and its stabilization by 2-thiouridine modification.

Surface plasmon resonance (BIACORE) was used to determine the kinetic values for formation of the HIV TAR-TAR* ('kissing hairpin') RNA complex. The TAR component was also synthesized with the modified nucleoside 2-thiouridine at position 7 in the loop and the kinetics and equilibrium dissociation constants compared with the unmodified TAR hairpin. The BIACORE data show an equilibrium dissociation constant of 1.58 nM for the complex containing the s(2)U modified TAR hairpin, which is 8-fold lower than for the parent hairpin (12.5 nM). This is a result of a 2-fold faster k(a) (4.14x10(5) M(-1) s(-1) versus 2.1x10(5) M(-1) s(-1)) and a 4-fold slower k(d) (6.55x10(-4) s(-1) versus 2.63x10(-3) s(-1)). (1)H NMR imino spectra show that the secondary structure interactions involved in complex formation are retained in the s(2)U-modified complex. Magnesium has been reported to significantly stabilize the TAR-TAR* complex and we found that Mn(2+) and Ca(2+) are also strongly stabilizing, while Mg(2+) exhibited the greatest effect on the complex kinetics. The stabilizing effects of 2-thiouridine indicate that this base modification may be generally useful as an antisense RNA modification for oligonucleotide therapeutics which target RNA loops.

Molecular recognition in the HIV-1 capsid/cyclophilin A complex.

The HIV-1 capsid protein (CA) makes an essential interaction with the human peptidyl prolyl isomerase, cyclophilin A (CypA), that results in packaging of CypA into the virion at a CA to CypA stoichiometry of approximately 10:1. The 231 amino acid residue capsid protein is composed of an amino-terminal CypA binding domain (1 to approximately 151; CA151) and a carboxyl-terminal dimerization domain (approximately 151 to 231). We find that CypA binds dimeric CA and monomeric CA151 with identical intrinsic affinities (K[d] = 16(+/-4) microM). This result demonstrates that capsid dimerization and cyclophilin A binding are not thermodynamically coupled and suggests that the substoichiometric ratio of CypA in the HIV-1 virion results from the intrinsic stability of the CA/CypA complex. In the known co-crystal structure of the CA151/CypA complex, CypA binding is mediated exclusively by an exposed capsid loop that spans residues Pro85 to Pro93. The energetic contributions to CypA binding were quantified for each residue in this loop, and the results demonstrate that the Gly89-Pro90 dipeptide is the primary cyclophilin A recognition motif, with Pro85, Val86, His87, Ala88, and Pro93 also making energetically favorable contacts. These studies reveal that the active site of CypA, which can catalyze the isomerization of proline residues in vitro, also functions as a sequence-specific, protein-binding motif in HIV-1 replication.

Advances in surface plasmon resonance biosensor analysis.

The number and diversity of surface plasmon resonance (SPR) biosensor applications continue to increase. Evolutions in instrument and sensor chip technology, experimental methodology, and data analysis are making it possible to examine a wider variety of biomolecular interactions in greater mechanistic detail. SPR biosensors are poised to make a significant impact in basic research and pharmaceutical discovery.

Kinetic analysis of ligand binding to interleukin-2 receptor complexes created on an optical biosensor surface.

The interleukin-2 receptor (IL-2R) is composed of at least three cell surface subunits, IL-2R alpha, IL-2R beta, and IL-2R gamma c. On activated T-cells, the alpha- and beta-subunits exist as a preformed heterodimer that simultaneously captures the IL-2 ligand as the initial event in formation of the signaling complex. We used BIAcore to compare the binding of IL-2 to biosensor surfaces containing either the alpha-subunit, the beta-subunit, or both subunits together. The receptor ectodomains were immobilized in an oriented fashion on the dextran matrix through unique solvent-exposed thiols. Equilibrium analysis of the binding data established IL-2 dissociation constants for the individual alpha- and beta-subunits of 37 and 480 nM, respectively. Surfaces with both subunits immobilized, however, contained a receptor site of much higher affinity, suggesting the ligand was bound in a ternary complex with the alpha- and beta-subunits, similar to that reported for the pseudo-high-affinity receptor on cells. Because the binding responses had the additional complexity of being mass transport limited, obtaining accurate estimates for the kinetic rate constants required global fitting of the data sets from multiple surface densities of the receptors. A detailed kinetic analysis indicated that the higher-affinity binding sites detected on surfaces containing both alpha- and beta-subunits resulted from capture of IL-2 by a preformed complex of these subunits. Therefore, the biosensor analysis closely mimicked the recognition properties reported for these subunits on the cell surface, providing a convenient and powerful tool to assess the structure-function relationships of this and other multiple subunit receptor systems.

The ABRF-MIRG'02 study: assembly state, thermodynamic, and kinetic analysis of an enzyme/inhibitor interaction.

Fully characterizing the interactions involving biomolecules requires information on the assembly state, affinity, kinetics, and thermodynamics associated with complex formation. The analytical technologies often used to measure biomolecular interactions include analytical ultracentrifugation (AUC), isothermal titration calorimetry (ITC), and surface plasmon resonance (SPR). In order to evaluate the capabilities of core facilities to implement these technologies, the Association of Biomolecular Resource Facilities (ABRF) Molecular Interactions Research Group (MIRG) developed a standardized model system and distributed it to a panel of AUC, ITC, and SPR operators. The model system was composed of a well-characterized enzyme-inhibitor pair, namely bovine carbonic anhydrase II (CA II) and 4-carboxybenzenesulfonamide (CBS). Study participants were asked to measure one or more of the following: (1) the molecular mass, homogeneity, and assembly state of CA II by AUC; (2) the affinity and thermodynamics for complex formation by ITC; and (3) the affinity and kinetics of complex formation by SPR. The results from this study provide a benchmark for comparing the capabilities of individual laboratories and for defining the utility of the different instrumentation.

Kinetic analysis of a protein antigen-antibody interaction limited by mass transport on an optical biosensor.

Using BIAcore technology, we determined the rate constants for a protein antigen-antibody interaction that was mass transport limited on the optical biosensor. The antigen consisted of a soluble form of the human T-cell receptor CD4 (two amino terminal domains, D1D2) and the antibody was an anti-CD4 monoclonal from monkey engineered with the constant domains from human IgG1. High quality response data were obtained for this interaction by orienting the attachment of the antibody on the sensor surface and correcting for instrument artifacts with control experiments. Using numerical integration and global fitting, we demonstrate that a mass transport limited reaction was the only model of those tested that described well D1D2 binding to three different surface densities of the antibody. Statistical profiling techniques showed that the error space and correlation for the parameters in the non-linear model were essentially linear, but only when the model was simultaneously fitted to data from multiple surface densities. The "on" and "off" rate constants (1.2 x 10(-6) M-1 s-1 and 2.9 x 10(-4) s-1) determined from the kinetic analysis predict an equilibrium dissociation constant (KD = 0.24 +/- 0.01 nM) that agrees with the value measured in solution by titration calorimetry (KD = 0.2 +/- 0.1 nM). The results indicate that, although the D1D2-antibody reaction is partially controlled by mass transport on the optical biosensor, by optimizing the experimental design and analyzing data from multiple surface densities it is possible to determine accurate estimates of the intrinsic equilibrium and kinetic rate constants.

Improving biosensor analysis.

The quality of optical biosensor data must be improved in order to characterize the mechanism and rate constants associated with molecular interactions. Many of the artifacts associated with binding data can be minimized or eliminated by designing the experiment properly, collecting data under optimum conditions and processing the data with reference surfaces. It is possible to globally fit high-quality biosensor data with simple bimolecular reaction models, which validates the technology as a biophysical tool for interaction analysis.

Survey of the 1998 optical biosensor literature.

The utilization of optical biosensors to study molecular interactions continues to expand. In 1998, 384 articles relating to the use of commercial biosensors were published in 130 different journals. While significant strides in new applications and methodology were made, a majority of the biosensor literature is of rather poor quality. Basic information about experimental conditions is often not presented and many publications fail to display the experimental data, bringing into question the credibility of the results. This review provides suggestions on how to collect, analyze and report biosensor data.

Synthesis of the photoaffinity probe 3-(p-azidobenzyl)-4-hydroxycoumarin and identification of the dicoumarol binding site in rat liver NAD(P)H:quinone reductase (EC 1.6.99.2).

A photoaffinity analog of 4-hydroxycoumarin containing an azidobenzyl group at the 3-position and, if desired, carbon-14 or tritium radionuclides has been synthesized and characterized. This compound, 3-(p-azidobenzyl)-4-hydroxycoumarin, serves as an effective competitive inhibitor of the dicoumarol-sensitive NAD(P)H:quinone reductase (EC 1.6.99.2; DT-diaphorase) from rat liver, having an apparent inhibition constant of 6.6 x 10(-8) M, a value comparable to that observed for dicoumarol (1.7 x 10(-9) M), significantly lower than for Warfarin (3.5 x 10(-5) M) and well within the range required of an effective photoaffinity reagent. Irradiation of the reductase with ultraviolet light in the presence of the photoprobe resulted in the covalent labeling of up to 10% of the protein. Greater than 99% of the covalent incorporation is precluded by the addition of 15 microM dicoumarol, consistent with the specific labeling of the 4-hydroxycoumarin binding site of this enzyme by this photoaffinity reagent. Further evidence of a high degree of specificity is provided by the isolation and sequence analysis of the peptides covalently modified by this reagent. A single region within the protein was found to be labeled, with threonine 127 and tyrosine 128 being the only amino acid residues that were observed to be modified. These results, for the first time, define a portion of the 4-hydroxycoumarin binding site within a protein that has a well established sensitivity to this type of anticoagulant and, because dicoumarol serves as a competitive inhibitor for pyridine nucleotides in this enzyme, may also define a portion of this unusual pyridine nucleotide binding site. In addition, these results suggest that this reagent may be effective as a highly specific photoaffinity probe in the identification of other proteins that are similarly inhibited by 4-hydroxycoumarin derivatives, such as the microsomal enzymes associated with the vitamin K-dependent carboxylation system.

Identification by photoaffinity labeling of fatty acid-binding protein as a potential warfarin receptor in rat liver.

Two different photoaffinity analogs of 4-hydroxy coumarin, 3-(p-azidobenzyl)-4-hydroxycoumarin (AzBHC) and 3-(4-azido-5-iodosalicylamido)-4-hydroxycoumarin (AzISAHC), are being used in the identification of warfarin-binding proteins present in mammalian tissue (Myszka, D. G., and Swenson, R. P. (1990) Biochem. Biophys. Res. Commun. 172, 415-422; Myszka, D. G., and Swenson, R. P. (1991) J. Biol. Chem. 266, 4789-4797). In this study, [14C]AzBHC, but not [125I]AzISAHC, was observed to specifically label a 15,000-dalton protein present in both the microsomal and cytosolic fractions of rat liver. Pretreatment of the crude protein samples with warfarin or dicoumarol completely protected the 15-kDa protein from modification by [14C]AzBHC, indicating that this photoaffinity reagent is specifically labeling a coumarin-binding protein. 4-Hydroxycoumarin itself and AzISAHC were unable to block the incorporation of this photoaffinity probe. The 15-kDa protein was isolated by two-dimensional electrophoresis and subjected to amino-terminal sequence analysis. The first 20 amino acid residues analyzed were found to be identical with the amino-terminal sequence of rat liver fatty acid-binding protein (L-FABP) (Gordon J. I., Alpers, D. H., Ockner, R. K., and Strauss, A. W. (1983) J. Biol. Chem. 258, 3356-3363). Photoaffinity labeling and protection experiments carried out on purified preparations of L-FABP paralleled the labeling results obtained in the microsomes and cytosol, confirming that L-FABP is capable of specifically binding AzBHC, warfarin, and dicoumarol. Oleic acid, an established ligand for L-FABP, can compete with the binding of the photoaffinity probe; however, it was less effective in protecting the protein than warfarin. The specificity of labeling of crude liver fractions by warfarin photoaffinity analogs reported here as well as the high concentration of FABP in liver tissue together suggest that this protein may represent a major hepatic receptor responsible for the uptake and/or transport of various oral 4-hydroxycoumarin-based anticoagulant drugs.

Design and characterization of an intramolecular antiparallel coiled coil peptide.

A 56-residue polypeptide was designed to fold into a stable intramolecular antiparallel coiled coil, referred to as a coiled coil stem loop. The antiparallel orientation of the alpha-helices was dictated by the alignment of hydrophobic and ionic residues in the heptad repeat sequence (a, b, c, d, e, f, g)n. The hydrophobic core at the coiled coil interface was occupied by leucine and valine residues in heptad positions d and a' and positions a and d', respectively. The interface border positions e and g were occupied by glutamic acid in the amino-terminal helix and lysine residues in the carboxy-terminal helix. A loop segment connecting the alpha-helices began and ended with the helix-breaking residues glycine and proline. Alanine and serine residues were placed on the exposed b, c, and f positions of both helices to increase the helical propensity and solubility of the peptide, respectively. Several lines of evidence argued that the synthetic peptide made with this design folded into a stable monomeric coiled coil stem loop conformation: (1) the peptide was highly soluble in 150 mM sodium chloride and 50 mM sodium phosphate, pH 7.4; (2) the circular dichroism spectrum was alpha-helical but with relative ellipticity minima at 222 and 208 nm characteristic of a coiled coil structure: (3) the peptide exhibited an alpha-helical content near 80%, which was independent of peptide concentration and unchanged in the presence of trifluoroethanol; (4) size exclusion chromatography and sedimentation equilibrium ultracentrifuge measurements confirmed that the peptide was monomeric in aqueous solution; (5) the peptide exhibited high helical content over a wide pH range; (6) the apparent Tm for unfolding the alpha-helical structure was greater than 65 degrees C, and 3.0 M urea was required to reduce the helical structure by 50%; (7) a disulfide bond was readily formed in the monomer between the amino- and carboxy-terminal cysteine residues, confirming the antiparallel orientation of the helices; and (8) the peptide competed with fibrinogen for the GPIIbIIIa receptor indicating that the RGD residues present in the loop sequence were available for binding. This work establishes that an antiparallel alignment of alpha-helices can be achieved by designing specific hydrophobic and ionic interactions within the coiled coil. The prototype coiled coil peptide represents a sequence-simplified scaffold into which residues from alpha-helices and loops of native proteins can be inserted to form conformationally constrained mimetic recognition molecules.

Synthesis of 3-(4-azido-5-iodosalicylamido)-4-hydroxycoumarin: photoaffinity labeling of rat liver dicoumarol-sensitive NAD(P)H: quinone reductase.

A photoaffinity analog of 4-hydroxycoumarin containing an arylazido derivative at the 3-position has been synthesized and characterized. This compound, 3-(4-azido-5-iodosalicylamido)-4-hydroxycoumarin, serves as a strong competitive inhibitor of the dicoumarol-sensitive NAD(P)H: quinone reductase (DT-diaphorase) from rat liver, having an apparent inhibition constant of 4.2 10(-7) M. Irradiation of the reductase with ultraviolet light in the presence 10 microM of the photoprobe resulted in the covalent labeling of 2% of the reductase molecules. The enzyme is protected from labeling to greater than 99% by the inclusion of 3 microM dicoumarol, consistent with the specific labeling of the 4-hydroxycoumarin binding site of this enzyme. Furthermore, the quinone reductase was shown to specifically labeled by the probe even when contained within crude fractions rat liver cytosol.