Fabrication of polyaniline/graphene oxide composites for implementation in humidity sensing.

This work reports the measurement of impedance variations under various humidity conditions at frequency ranges between 100 Hz and 5 MHz. An electrochemical polymerization process has been used in the synthesis including varying the mass ratios of graphene oxide (GO) in polyaniline. An electrochemical deposition method has been used to produce a sample film on an indium tin oxide glass slide. The percentage relative humidity (RH%) of the samples has been estimated to be 20-90%. Impedance and humidity had an inverse relationship, i.e. the impedance value decreased with an increase in humidity. In contrast with platinum capacitive humidity sensors (HS), the GO-based HS had a sensitivity of 75-99%, which was ~10-fold more than that of traditional sensors. With three different parameter weight % of GO, the frequency range have been 100 Hz to 5 MHz and RH% has been found to 20-90%. The HS showed a fast response and recovery time. Therefore, GO appears to be a useful material for building HS with high sensitivity for a comprehensive approach.

Detailed Kinetic and Mechanistic Study for the Preparation of Silver Nanoparticles by a Chemical Reduction Method in the Presence of a Neuroleptic Agent (Gabapentin) at an Alkaline pH and its Characterization.

For the very first time, a detailed kinetic study for the preparation of silver nanoparticles (silver NPs) by neuroleptic agent gabapentin (GBP) in the absence of a stabilizer has been reported in this investigation. This paper is devoted to the preparation of silver nanoparticles by a chemical reduction method in which gabapentin acts as both a reductant and a stabilizer, and AgNO3 is used as a source of Ag+ ions and NaOH for maintaining the alkaline medium. A UV-visible spectrophotometer is used to monitor the progress of the reaction kinetics in an aqueous medium by changing the concentration of different variables such as AgNO3, NaOH, and gabapentin at 40 °C. It is found that the reaction rate follows a pseudo-first-order reaction. The thermodynamic activation parameters were also studied at five different temperatures (303, 308, 313, 318, and 323 K) and used in the support of the proposed mechanistic scheme for the formation of silver nanoparticles. The prepared silver nanoparticles were characterized using different techniques: UV-visible spectrophotometry, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and powder X-ray diffraction. The average particle size was observed in the range of 5-45 nm.

Kinetic and Mechanistic Studies of the Formation of Silver Nanoparticles by Nicotinamide as a Reducing Agent.

Here, in the present study, silver nanoparticles (SNPs) in the size range 6-10 nm have been synthesized by a chemical reduction method using nicotinamide (NTA), an anti-inflammatory agent, and cetyltrimethylammonium bromide (CTAB), a good stabilizing agent, to preparing the nanoparticles in the 6-10 nm size range. Kinetic studies on the formation of SNPs have been performed spectrophotometrically at 410 nm (strong plasmon band) in aqueous medium as a function of [AgNO3], [NTA], [NaOH], and [CTAB]. The plot of ln(A ∞ - A t ) versus time exhibited a straight line and the pseudo-first-order rate constants of different variables were calculated from its slope. On the basis of experimental findings, a plausible mechanism was proposed for the formation of SNPs colloid. From the mechanism, it is proved that the reduction of silver ions proceeded through the formation of silver oxide in colloidal form by their reaction with hydroxide ions and NTA after performing their function and readily undergo hydrolysis to form nicotinic acid as a hydrolysis product with the release of ammonia gas. The preliminary characterization of the SNPs was carried out by using a UV-visible spectrophotometer. The detailed characterization of SNPs was also carried out using other experimental techniques such as Fourier transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and powder X-ray diffraction (PXRD). SNPs show a remarkable catalytic activity of up to 90% for the reduction of the cationic dye methylene blue.

Fabrication of α-Fe2O3 Nanostructures: Synthesis, Characterization, and Their Promising Application in the Treatment of Carcinoma A549 Lung Cancer Cells.

In the present work, iron nanoparticles were synthesized in the α-Fe2O3 phase with the reduction of potassium hexachloroferrate(III) by using l-ascorbic acid as a reducing agent in the presence of an amphiphilic non-ionic polyethylene glycol surfactant in an aqueous solution. The synthesized α-Fe2O3 NPs were characterized by powder X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and ultraviolet-visible spectrophotometry. The powder X-ray diffraction analysis result confirmed the formation of α-Fe2O3 NPs, and the average crystallite size was found to be 45 nm. The other morphological studies suggested that α-Fe2O3 NPs were predominantly spherical in shape with a diameter ranges from 40 to 60 nm. The dynamic light scattering analysis revealed the zeta potential of α-Fe2O3 NPs as -28 ± 18 mV at maximum stability. The ultraviolet-visible spectrophotometry analysis shows an absorption peak at 394 nm, which is attributed to their surface plasmon vibration. The cytotoxicity test of synthesized α-Fe2O3 NPs was investigated against human carcinoma A549 lung cancer cells, and the biological adaptability exhibited by α-Fe2O3 NPs has opened a pathway to biomedical applications in the drug delivery system. Our investigation confirmed that l-ascorbic acid-coated α-Fe2O3 NPs with calculated IC50 ≤ 30 µg/mL are the best suited as an anticancer agent, showing the promising application in the treatment of carcinoma A549 lung cancer cells.

Growth Kinetic Study of Tannic Acid Mediated Monodispersed Silver Nanoparticles Synthesized by Chemical Reduction Method and Its Characterization.

The complex process of nanoparticle formation in an aqueous solution is governed by kinetics and thermodynamic factors. This paper describes a room-temperature growth kinetic study and evaluation of thermodynamic activation parameters of monodispersed silver nanoparticles (AgNPs) synthesized in alkaline medium by chemical reduction method using AgNO3 as a source of Ag+ ions and tannic acid (TA) as a reductant (reducing agent) as well as a capping or stabilizing agent in the absence of any other external stabilizer. A simple and conveniently handled reaction process was monitored spectrophotometrically to study the growth kinetics in an aqueous solution as a function of the concentration of silver ion, hydroxide ion, and TA, respectively. The neutral nucleophilic group donates the electron density via a lone pair of electrons to Ag+ ions for the reduction process, i.e., for the nucleation of AgNPs colloid. Also, a few silver ions form a silver oxide, which also facilitates the nucleation center to enhance the growth of AgNPs colloid. The decrease and increase in rate constant on varying the TA concentration showed its adsorption onto the surface of metallic AgNPs and stabilized by polygalloyl units of TA and were the main elements to control the growth kinetics. Consequently, stabilized TA-mediated AgNPs are formed using the electron donated by quinone form of TA followed by a pseudo-first-order reaction. Apart from this, nanoparticles formed were characterized using UV-visible spectrophotometry, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and powder X-ray diffraction techniques to confirm its formation during the present kinetic study.

A novel catalytic kinetic method for the determination of mercury(ii) in water samples.

Mercury(ii) ions act as catalyst in the substitution of cyanide ion in hexacyanoruthenate(ii) by pyrazine (Pz) in an acidic medium. This property of Hg(ii) has been utilized for its determination in aqueous solutions. The progress of reaction was followed spectrophotometrically by measuring the increase in absorbance of the yellow colour product, [Ru(CN)5Pz]3- at 370 nm (λ max, ε = 4.2 × 103 M-1 s-1) under the optimized reaction conditions; 5.0 × 10-5 M [Ru(CN)6 4-], 7.5 × 10-4 M [Pz], pH 4.00 ± 0.02, ionic strength (I) = 0.05 M (KCl) and temp. 45.0 ± 0.1 °C. The proposed method is based on the fixed time procedure under optimum reaction conditions. The linear regression (calibration) equations between the absorbance at fixed times (t = 15, 20 and 25 min) and [Hg(ii)] were established in the range of 1.0 to 30.0 × 10-6 M. The detection limit was found to be 1.5 × 10-7 M of Hg(ii). The effect of various foreign ions on the proposed method was also studied and discussed. The method was applied for the determination of Hg(ii) in different wastewater samples. The present method is simple, rapid and sensitive for the determination of Hg(ii) in trace amount in the environmental samples.