A correlated ferromagnetic polar metal by design.

Polar metals have recently garnered increasing interest because of their promising functionalities. Here we report the experimental realization of an intrinsic coexisting ferromagnetism, polar distortion and metallicity in quasi-two-dimensional Ca3Co3O8. This material crystallizes with alternating stacking of oxygen tetrahedral CoO4 monolayers and octahedral CoO6 bilayers. The ferromagnetic metallic state is confined within the quasi-two-dimensional CoO6 layers, and the broken inversion symmetry arises simultaneously from the Co displacements. The breaking of both spatial-inversion and time-reversal symmetries, along with their strong coupling, gives rise to an intrinsic magnetochiral anisotropy with exotic magnetic field-free non-reciprocal electrical resistivity. An extraordinarily robust topological Hall effect persists over a broad temperature-magnetic field phase space, arising from dipole-induced Rashba spin-orbit coupling. Our work not only provides a rich platform to explore the coupling between polarity and magnetism in a metallic system, with extensive potential applications, but also defines a novel design strategy to access exotic correlated electronic states.

Electric-Field Control of Perpendicularly Magnetized Ferrimagnetic Order and Giant Magnetoresistance in Multiferroic Heterostructures.

Electrical control of magnetism is highly desirable for energy-efficient spintronic applications. Realizing electric-field-driven perpendicular magnetization switching has been a long-standing goal, which, however, remains a major challenge. Here, electric-field control of perpendicularly magnetized ferrimagnetic order via strain-mediated magnetoelectric coupling is reported. We show that the gate voltages isothermally toggle the dominant magnetic sublattice of the compensated ferrimagnet FeTb at room temperature, showing high reversibility and good endurance under ambient conditions. By implementing this strategy in FeTb/Pt/Co spin valves with giant magnetoresistance (GMR), we demonstrate that the distinct high and low resistance states can be selectively controlled by the gate voltages with assisting magnetic fields. Our results provide a promising route to use ferrimagnets for developing electric-field-controlled, low-power memory and logic devices.

Programmable Ferroelectricity in Hf0.5Zr0.5O2 Enabled by Oxygen Defect Engineering.

Ferroelectricity, especially the Si-compatible type recently observed in hafnia-based materials, is technologically useful for modern memory and logic applications, but it is challenging to differentiate intrinsic ferroelectric polarization from the polar phase and oxygen vacancy. Here, we report electrically controllable ferroelectricity in a Hf0.5Zr0.5O2-based heterostructure with Sr-doped LaMnO3, a mixed ionic-electronic conductor, as an electrode. Electrically reversible extraction and insertion of an oxygen vacancy into Hf0.5Zr0.5O2 are macroscopically characterized and atomically imaged in situ. Utilizing this reversible process, we achieved multilevel polarization states modulated by the electric field. Our study demonstrates the usefulness of the mixed conductor to repair, create, manipulate, and utilize advanced ferroelectric functionality. Furthermore, the programmed ferroelectric heterostructures with Si-compatible doped hafnia are desirable for the development of future ferroelectric electronics.

Single-Ion Conductive Polymer-Based Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries.

Flexible composite polymer electrolytes (CPEs) with inorganic electrolyte fillers dispersed in polymer electrolytes integrate the merits of the polymer and inorganic electrolytes and have attracted much attention in recent years. In order to increase the electrochemical performance, especially the low lithium (Li)-ion transference number in traditional dual-ion Li salt-containing CPEs, single-ion conductive CPEs are synthesized with a single-ion polymer conductor (SIPC) as the matrix and Li6.4 La3 Zr1.4 Ta0.6 O12 (LLZTO) particles as the active fillers. The single-ion conductive CPEs show a high Li-ion transference number (up to 0.96), high room-temperature (RT) ionic conductivity (>1.0 × 10-4 S cm-1 ), wide electrochemical stability window (>5.0 V, vs Li/Li+ ), and excellent long-term cycling stability with Li metal at RT (3200 h). Based on the SIPC-LLZTO CPE, the solid-state lithium metal batteries with LiFePO4 - and LiCoO2 -based cathodes deliver average discharge capacities of 159 mAh g-1 for 600 cycles and 119 mAh g-1 for 200 cycles at RT, respectively. This study sheds light on the design of high-performance CPEs for next-generation solid-state lithium metal batteries.

Carboxylated Poly (p-Phenylene Terephthalamide) Reinforced Polyetherimide for High-Temperature Dielectric Energy Storage.

Dielectric energy storage polymers play a vital role in advanced electronics and electrical systems, due to their high breakdown strength, excellent reliability, and easy fabrication. However, the low dielectric constant and poor thermal resistance of dielectric polymers limit their energy storage density and working temperatures, making them less versatile for broader applications. In this work, a novel carboxylated poly (p-phenylene terephthalamide) (c-PPTA) is synthesized and employed to simultaneously enhance the dielectric constant and thermal resistance of polyetherimide (PEI), leading to a discharged energy density of 6.4 J cm-3 at 150 °C. The introduction of c-PPTA molecules effectively reduces the Πï£¿Π stacking effect and increases the average chain spacing between polymer molecules, which is conducive to improving the dielectric constant. Additionally, c-PPTA molecules with stronger positive charges and high dipole moments can capture electrons, resulting in reduced conduction loss and enhanced breakdown strength at high temperatures. The coiled capacitor fabricated with the PEI/c-PPTA film exhibits superior capacitance performances and higher working temperatures compared to commercial metalized PP capacitors, demonstrating great potential for dielectric polymers in high-temperature electronic and electrical energy storage systems.

Manipulating the insulator-metal transition through tip-induced hydrogenation.

Manipulating the insulator-metal transition in strongly correlated materials has attracted a broad range of research activity due to its promising applications in, for example, memories, electrochromic windows and optical modulators1,2. Electric-field-controlled hydrogenation using ionic liquids3-6 and solid electrolytes7-9 is a useful strategy to obtain the insulator-metal transition with corresponding electron filling, but faces technical challenges for miniaturization due to the complicated device architecture. Here we demonstrate reversible electric-field control of nanoscale hydrogenation into VO2 with a tunable insulator-metal transition using a scanning probe. The Pt-coated probe serves as an efficient catalyst to split hydrogen molecules, while the positive-biased voltage accelerates hydrogen ions between the tip and sample surface to facilitate their incorporation, leading to non-volatile transformation from insulating VO2 into conducting HxVO2. Remarkably, a negative-biased voltage triggers dehydrogenation to restore the insulating VO2. This work demonstrates a local and reversible electric-field-controlled insulator-metal transition through hydrogen evolution and presents a versatile pathway to exploit multiple functional devices at the nanoscale.

High-entropy enhanced capacitive energy storage.

Electrostatic dielectric capacitors are essential components in advanced electronic and electrical power systems due to their ultrafast charging/discharging speed and high power density. A major challenge, however, is how to improve their energy densities to effectuate the next-generation applications that demand miniaturization and integration. Here, we report a high-entropy stabilized Bi2Ti2O7-based dielectric film that exhibits an energy density as high as 182 J cm-3 with an efficiency of 78% at an electric field of 6.35 MV cm-1. Our results reveal that regulating the atomic configurational entropy introduces favourable and stable microstructural features, including lattice distorted nano-crystalline grains and a disordered amorphous-like phase, which enhances the breakdown strength and reduces the polarization switching hysteresis, thus synergistically contributing to the energy storage performance. This high-entropy approach is expected to be widely applicable for the development of high-performance dielectrics.

Electric-field control of tri-state phase transformation with a selective dual-ion switch.

Materials can be transformed from one crystalline phase to another by using an electric field to control ion transfer, in a process that can be harnessed in applications such as batteries, smart windows and fuel cells. Increasing the number of transferrable ion species and of accessible crystalline phases could in principle greatly enrich material functionality. However, studies have so far focused mainly on the evolution and control of single ionic species (for example, oxygen, hydrogen or lithium ions). Here we describe the reversible and non-volatile electric-field control of dual-ion (oxygen and hydrogen) phase transformations, with associated electrochromic and magnetoelectric effects. We show that controlling the insertion and extraction of oxygen and hydrogen ions independently of each other can direct reversible phase transformations among three different material phases: the perovskite SrCoO3-δ (ref. 12), the brownmillerite SrCoO2.5 (ref. 13), and a hitherto-unexplored phase, HSrCoO2.5. By analysing the distinct optical absorption properties of these phases, we demonstrate selective manipulation of spectral transparency in the visible-light and infrared regions, revealing a dual-band electrochromic effect that could see application in smart windows. Moreover, the starkly different magnetic and electric properties of the three phases-HSrCoO2.5 is a weakly ferromagnetic insulator, SrCoO3-δ is a ferromagnetic metal, and SrCoO2.5 is an antiferromagnetic insulator-enable an unusual form of magnetoelectric coupling, allowing electric-field control of three different magnetic ground states. These findings open up opportunities for the electric-field control of multistate phase transformations with rich functionalities.

High-Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All-Solid-State Batteries.

Superionic solid electrolytes (SEs) are essential for bulk-type solid-state battery (SSB) applications. Multicomponent SEs are recently attracting attention for their favorable charge-transport properties, however a thorough understanding of how configurational entropy (ΔSconf ) affects ionic conductivity is lacking. Here, we successfully synthesized a series of halogen-rich lithium argyrodites with the general formula Li5.5 PS4.5 Clx Br1.5-x (0≤x≤1.5). Using neutron powder diffraction and 31 P magic-angle spinning nuclear magnetic resonance spectroscopy, the S2- /Cl- /Br- occupancy on the anion sublattice was quantitatively analyzed. We show that disorder positively affects Li-ion dynamics, leading to a room-temperature ionic conductivity of 22.7 mS cm-1 (9.6 mS cm-1 in cold-pressed state) for Li5.5 PS4.5 Cl0.8 Br0.7 (ΔSconf =1.98R). To the best of our knowledge, this is the first experimental evidence that configurational entropy of the anion sublattice correlates with ion mobility. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors by tailoring the degree of compositional complexity. Moreover, the Li5.5 PS4.5 Cl0.8 Br0.7 SE allowed for stable cycling of single-crystal LiNi0.9 Co0.06 Mn0.04 O2 (s-NCM90) composite cathodes in SSB cells, emphasizing that dual-substituted lithium argyrodites hold great promise in enabling high-performance electrochemical energy storage.

An Anomalous Electron Configuration Among 3d Transition Metal Atoms.

Physical properties of materials are mainly determined by valence electron configurations, where different valence shells would induce divergent phenomena. In compounds containing Sc2+ , 3d electron occupancy is expected, the same as other transition metal atoms like Ti3+ . But this situation still awaits experimental verification in inorganic materials. Here, we selected ScS to measure the valence electron density and orbital population of Sc2+ through delicate quantitative convergent-beam electron diffraction. With the absence of 3d orbital features around Sc-atom sites and the nearly bare population of t2g orbital, the unintuitive occupation of 4s orbital in Sc2+ is concluded. It should be the first time to report such a special electron configuration in a transition metal compound, in which 4s rather than 3d orbital is preferred. Our findings reveal the distinct behavior of Sc and probable ways to modulate material properties by controlling electron orbitals.

Aqueous MXene/Xanthan Gum Hybrid Inks for Screen-Printing Electromagnetic Shielding, Joule Heater, and Piezoresistive Sensor.

MXenes have exhibited potential for application in flexible devices owing to their remarkable electronic, optical, and mechanical properties. Printing strategies have emerged as a facile route for additive manufacturing of MXene-based devices, which relies on the rational design of functional inks with appropriate rheological properties. Herein, aqueous MXene/xanthan gum hybrid inks with tunable viscosity, excellent printability, and long-term stability are designed. Screen-printed flexible MXene films using such hybrid inks exhibit a high conductivity up to 4.8 × 104  S m-1 , which is suitable to construct multifunctional devices mainly including electromagnetic shielding, Joule heaters, and piezoresistive sensors. The average electromagnetic interference (EMI) shielding value can reach to 40.1 dB. In the Joule heater, the heating rate of printed MXene film can reach 20 °C s-1 under a driving voltage of 4 V, with a highest steady-state temperature of 130.8 °C. An MXene-based piezoresistive sensor prepared by the printing interdigital electrode also presents good sensing performance with a short response time of 130 ms and wide pressure region up to 30 kPa. As a result, screen-printed MXene film exhibits reinforced multifunctional performance, which is promising for application in the next-generation of intelligent and wearable devices.

Mobile Ions in Composite Solids.

Fast ion conduction in solid-state matrices constitutes the foundation for a wide spectrum of electrochemical systems that use solid electrolytes (SEs), examples of which include solid-state batteries (SSBs), solid oxide fuel cells (SOFCs), and diversified gas sensors. Mixing different solid conductors to form composite solid electrolytes (CSEs) introduces unique opportunities for SEs to possess exceptional overall performance far superior to their individual parental solids, thanks to the abundant chemistry and physics at the new interfaces thus created. In this review, we provide a comprehensive and in-depth examination of the development and understanding of CSEs for SSBs, with special focus on their physiochemical properties and mechanisms of ion transport therein. The origin of the enhanced ionic conductivity in CSEs relative to their single-phase parents is discussed in the context of defect chemistry and interfacial reactions. The models/theories for ion movement in diversified composites are critically reviewed to interrogate a general strategy to the design of novel CSEs, while properties such as mechanical strength and electrochemical stability are discussed in view of their perspective applications in lithium metal batteries and beyond. As an integral component of understanding how ions interact with their composite environments, characterization techniques to probe the ion transport kinetics across different temporal and spatial time scales are also summarized.

An Overview of Linear Dielectric Polymers and Their Nanocomposites for Energy Storage.

As one of the most important energy storage devices, dielectric capacitors have attracted increasing attention because of their ultrahigh power density, which allows them to play a critical role in many high-power electrical systems. To date, four typical dielectric materials have been widely studied, including ferroelectrics, relaxor ferroelectrics, anti-ferroelectrics, and linear dielectrics. Among these materials, linear dielectric polymers are attractive due to their significant advantages in breakdown strength and efficiency. However, the practical application of linear dielectrics is usually severely hindered by their low energy density, which is caused by their relatively low dielectric constant. This review summarizes some typical studies on linear dielectric polymers and their nanocomposites, including linear dielectric polymer blends, ferroelectric/linear dielectric polymer blends, and linear polymer nanocomposites with various nanofillers. Moreover, through a detailed analysis of this research, we summarize several existing challenges and future perspectives in the research area of linear dielectric polymers, which may propel the development of linear dielectric polymers and realize their practical application.

Spatially Resolved Electric-Field Manipulation of Magnetism for CoFeB Mesoscopic Discs on Ferroelectrics.

Electric-field control of magnetism in ferromagnetic/ferroelectric multiferroic heterostructures is a promising way to realize fast and nonvolatile random-access memory with high density and low-power consumption. An important issue that has not been solved is the magnetic responses to different types of ferroelectric-domain switching. Here, for the first time three types of magnetic responses are reported induced by different types of ferroelectric domain switching with in situ electric fields in the CoFeB mesoscopic discs grown on PMN-PT(001), including type I and type II attributed to 109°, 71°/180° ferroelectric domain switching, respectively, and type III attributed to a combined behavior of multiferroelectric domain switching. Rotation of the magnetic easy axis by 90° induced by 109° ferroelectric domain switching is also found. In addition, the unique variations of effective magnetic anisotropy field with electric field are explained by the different ferroelectric domain switching paths. The spatially resolved study of electric-field control of magnetism on the mesoscale not only enhances the understanding of the distinct magnetic responses to different ferroelectric domain switching and sheds light on the path of ferroelectric domain switching, but is also important for the realization of low-power consumption and high-speed magnetic random-access memory utilizing these materials.

Lattice Dynamics and Thermal Conductivity in Cu2Zn1- xCo xSnSe4.

The quaternary compound Cu2ZnSnSe4 (CZTSe), as a typical candidate for both solar cells and thermoelectrics, is of great interest for energy harvesting applications. Materials with a high thermoelectric efficiency have a relatively low thermal conductivity, which is closely related to their chemical bonding and lattice dynamics. Therefore, it is essential to investigate the lattice dynamics of materials to further improve their thermoelectric efficiency. Here we report a lattice dynamic study in a cobalt-substituted CZTSe system using temperature-dependent X-ray absorption fine structure spectroscopy (TXAFS). The lattice contribution to the thermal conductivity is dominant, and its reduction is mainly ascribed to the increment of point defects after cobalt substitution. Furthermore, a lattice dynamic study shows that the Einstein temperature of atomic pairs is reduced after cobalt substitution, revealing that increasing local structure disorder and weakened bonding for each of the atomic pairs are achieved, which gives us a new perspective for understanding the behavior of lattice thermal conductivity.

Synergistic Coupling between Li6.75La3Zr1.75Ta0.25O12 and Poly(vinylidene fluoride) Induces High Ionic Conductivity, Mechanical Strength, and Thermal Stability of Solid Composite Electrolytes.

Easy processing and flexibility of polymer electrolytes make them very promising in developing all-solid-state lithium batteries. However, their low room-temperature conductivity and poor mechanical and thermal properties still hinder their applications. Here, we use Li6.75La3Zr1.75Ta0.25O12 (LLZTO) ceramics to trigger structural modification of poly(vinylidene fluoride) (PVDF) polymer electrolyte. By combining experiments and first-principle calculations, we find that La atom of LLZTO could complex with the N atom and C═O group of solvent molecules such as N,N-dimethylformamide along with electrons enriching at the N atom, which behaves like a Lewis base and induces the chemical dehydrofluorination of the PVDF skeleton. Partially modified PVDF chains activate the interactions between the PVDF matrix, lithium salt, and LLZTO fillers, hence leading to significantly improved performance of the flexible electrolyte membrane (e.g., a high ionic conductivity of about 5 × 10-4 S cm-1 at 25 °C, high mechanical strength, and good thermal stability). For further illustration, a solid-state lithium battery of LiCoO2|PVDF-based membrane|Li is fabricated and delivers satisfactory rate capability and cycling stability at room temperature. Our study indicates that the LLZTO modifying PVDF membrane is a promising electrolyte used for all-solid-state lithium batteries.

Fast Magnetic Domain-Wall Motion in a Ring-Shaped Nanowire Driven by a Voltage.

Magnetic domain-wall motion driven by a voltage dissipates much less heat than by a current, but none of the existing reports have achieved speeds exceeding 100 m/s. Here phase-field and finite-element simulations were combined to study the dynamics of strain-mediated voltage-driven magnetic domain-wall motion in curved nanowires. Using a ring-shaped, rough-edged magnetic nanowire on top of a piezoelectric disk, we demonstrate a fast voltage-driven magnetic domain-wall motion with average velocity up to 550 m/s, which is comparable to current-driven wall velocity. An analytical theory is derived to describe the strain dependence of average magnetic domain-wall velocity. Moreover, one 180° domain-wall cycle around the ring dissipates an ultrasmall amount of heat, as small as 0.2 fJ, approximately 3 orders of magnitude smaller than those in current-driven cases. These findings suggest a new route toward developing high-speed, low-power-dissipation domain-wall spintronics.

Nanoscale heterogeneity in thermoelectrics: the occurrence of phase separation in Fe-doped Ca3Co4O9.

The misfit layered cobaltate thermoelectrics are good candidates for high temperature thermoelectric applications. Ca3Co4O9 is a typical compound of this family, which consists of rock salt Ca2CoO3 slabs alternating with hexagonal CoO2 slabs with a large lattice mismatch along the b axis. Each slab is 0.3-0.5 nm thick and shows an inherent structural heterogeneity at the nanoscale. The latter is a key parameter that affects the electrical transport and the heat flow in these misfit structured thermoelectrics. To clarify the physical origin of the thermoelectric performance of iron doped Ca3Co4O9 we combined X-ray near-edge absorption spectroscopy (XANES) and quantum modeling using density functional theory. In contrast to single-site doping, the iron doping first occurs at the Co1 site of the rock salt slab at low doping while at higher doping it prefers the Ca1 site of the rock salt slab. Doping at the Ca1 site modifies the electronic structure tuning the nanoscale structural heterogeneity. This mechanism may open a new route to optimizing the thermoelectric performance of misfit layered thermoelectrics.

Purely electric-field-driven perpendicular magnetization reversal.

If achieved, magnetization reversal purely with an electric field has the potential to revolutionize the spintronic devices that currently utilize power-dissipating currents. However, all existing proposals involve the use of a magnetic field. Here we use phase-field simulations to study the piezoelectric and magnetoelectric responses in a three-dimensional multiferroic nanostructure consisting of a perpendicularly magnetized nanomagnet with an in-plane long axis and a juxtaposed ferroelectric nanoisland. For the first time, we demonstrate a full reversal of perpendicular magnetization via successive precession and damping, driven purely by a perpendicular electric-field pulse of certain pulse duration across the nanoferroelectric. We discuss the materials selection and size dependence of both nanoferroelctrics and nanomagnets for experimental verification. These results offer new inspiration to the design of spintronic devices that simultaneously possess high density, high thermal stability, and high reliability.

Enhanced thermoelectric properties of Ga-doped In2O3 ceramics via synergistic band gap engineering and phonon suppression.

Ga doped In2O3-based thermoelectric materials were prepared by spark plasma sintering (SPS) using sintered powders in the low temperature solid phase. The solubility of Ga in In2O3 is about 10 at%, much larger than other elements such as Ge, Ce, etc. The larger solubility of Ga allows us to optimize the thermal and electrical transport properties of Ga doped In2O3 in a wider window. While tuning the concentration of dopants, the thermoelectric performance of Ga doped In2O3 was enhanced through a synergistic approach combining band-gap engineering and phonon suppression. The power factor increases from ∼0.5 × 10(-4) to ∼9.6 × 10(-4) W mK(-2) at 700 °C while thermal conductivity reduces from ∼4 to ∼2 W mK(-1) at 700 °C in In1.9Ga0.1O3. The maximum ZT of 0.37, increased by a factor of 4 from the pristine In2O3, is achieved in In1.9Ga0.1O3 at 700 °C.