Molybdenum-Ruthenium-Carbon Solid-Solution Alloy Nanoparticles: Can They Be Pseudo-Technetium Carbide?

Technetium (Tc), atomic number 43, is an element that humans cannot freely use even in the 21st century because Tc is radioactive and has no stable isotope. In this report, we present molybdenum-ruthenium-carbon solid-solution alloy (MoxRu1-xCy) nanoparticles (NPs) that are expected to have an electronic structure similar to that of technetium carbide (TcCy). MoxRu1-xCy NPs were synthesized by annealing under a helium/hydrogen atmosphere following thermal decomposition of metal precursors. The obtained NPs had a solid-solution structure in the whole composition range. MoxRu1-xCy with a cubic structure (down to 30 atom % Mo in the metal ratio) showed a superconducting state, and the transition temperature (Tc) increased with increasing Mo composition. The continuous change in Tc across that of TcCy indicates the continuous control of the electronic structure by solid-solution alloying, leading to pseudo-TcCy. Density functional theory calculations indicated that the synthesized Mo0.53Ru0.47C0.41 has a similar electronic structure to TcC0.41.

Noble-Metal High-Entropy-Alloy Nanoparticles: Atomic-Level Insight into the Electronic Structure.

The compositional space of high-entropy-alloy nanoparticles (HEA NPs) significantly expands the diversity of the materials library. Every atom in HEA NPs has a different elemental coordination environment, which requires knowledge of the local electronic structure at an atomic level. However, such structure has not been disclosed experimentally or theoretically. We synthesized HEA NPs composed of all eight noble-metal-group elements (NM-HEA) for the first time. Their electronic structure was revealed by hard X-ray photoelectron spectroscopy and density function theory calculations with NP models. The NM-HEA NPs have a lower degeneracy in energy level compared with the monometallic NPs, which is a common feature of HEA NPs. The local density of states (LDOS) of every surface atom was first revealed. Some atoms of the same constituent element in HEA NPs have different LDOS profiles, whereas atoms of other elements have similar LDOS profiles. In other words, one atom in HEA loses its elemental identity and it may be possible to create an ideal LDOS by adjusting the neighboring atoms. The tendency of the electronic structure change was shown by supervised learning. The NM-HEA NPs showed 10.8-times higher intrinsic activity for hydrogen evolution reaction than commercial Pt/C, which is one of the best catalysts.

Thermodynamic stability of Pd-Ru alloy nanoparticles: combination of density functional theory calculations, supervised learning, and Wang-Landau sampling.

Solid-solution alloy nanoparticles (NPs) comprising Pd and Ru, which are immiscible in the bulk state, have been synthesised and show excellent catalytic performance. To date, most studies have evaluated the stability of alloy NPs at 0 K only. Because the thermodynamic stability of Pd-Ru alloy NPs may differ from that of the alloy in the bulk state, the stable configuration of the NPs must be evaluated under a finite temperature. Such stability evaluations are critical for developing the durable NPs as catalysts. Therefore, the thermodynamic stability of Pd-Ru alloy NPs was analysed using density functional theory (DFT), supervised learning (SL), and Wang-Landau sampling. We calculated the excess energy of Pd-Ru alloy NPs, which depends on their composition, structure, NP size, adatom type, and defects, and applied SL to all models. The excess energies of the Pd-Ru alloy NPs expressed by structural information, such as the surface-to-volume ratio, correlated with those calculated using DFT. Wang-Landau sampling based on the energy estimated by SL gave the thermodynamic stability of Pd-Ru alloy NPs with a stable configuration under a finite temperature. The solid-solution atomic configuration was subdivided into partially mixed configurations in the surface layer or in the core of the NPs, which is different from the bulk state. The partially mixed configuration was determined by the overall composition and surface properties. The findings from the combined method could contribute to a better understanding of the alloy-NP stability and their application in catalysis.

Operando resonant soft X-ray emission spectroscopy of the LiMn2O4 cathode using an aqueous electrolyte solution.

The Mn 3d electronic-structure change of the LiMn2O4 cathode during Li-ion extraction/insertion in an aqueous electrolyte solution was studied by operando resonant soft X-ray emission spectroscopy (RXES). The Mn L3 RXES spectra for the charged state revealed the Mn4+ state with strong charge-transfer from the O 2p to Mn 3d orbitals dominates, while for the open-circuit-voltage and discharged states it is ascribed to the mixture of sites with Mn3+ and Mn4+ states. The degree of charge transfer is significantly different between the Mn3+ and Mn4+ states, indicating that the redox reaction takes place on the strongly-hybridized Mn 3d-O 2p orbital rather than the localized Mn 3d orbital.

Prognostic value of non-alcoholic fatty liver disease for predicting cardiovascular events in patients with diabetes mellitus with suspected coronary artery disease: a prospective cohort study.

BACKGROUND: Risk stratification of cardiovascular events in patients with type 2 diabetes mellitus (T2DM) has not been established. Coronary artery calcium score (CACS) and non-alcoholic fatty liver disease (NAFLD) are independently associated with cardiovascular events in T2DM patients. This study examined the incremental prognostic value of NAFLD assessed by non-enhanced computed tomography (CT) in addition to CACS and Framingham risk score (FRS) for cardiovascular events in T2DM patients. METHODS: This prospective pilot study included 529 T2DM outpatients with no history of cardiovascular disease who underwent CACS measurement because of suspected coronary artery disease. NAFLD was defined on CT images as a liver:spleen attenuation ratio < 1.0. Cardiovascular events were defined as cardiovascular death, nonfatal myocardial infarction, late coronary revascularization, nonfatal stroke, or hospitalization for heart failure. RESULTS: Among 529 patients (61% men, mean age 65 years), NAFLD was identified in 143 (27%). Forty-four cardiovascular events were documented during a median follow-up of 4.4 years. In multivariate Cox regression analysis, NAFLD, CACS, and FRS were associated with cardiovascular events (hazard ratios and 95% confidence intervals 5.43, 2.82-10.44, p < 0.001; 1.56, 1.32-1.86, p < 0.001; 1.23, 1.08-1.39, p = 0.001, respectively). The global χ2 score for predicting cardiovascular events increased significantly from 27.0 to 49.7 by adding NAFLD to CACS and FRS (p < 0.001). The addition of NAFLD to a model including CACS and FRS significantly increased the C-statistic from 0.71 to 0.80 (p = 0.005). The net reclassification achieved by adding CACS and FRS was 0.551 (p < 0.001). CONCLUSIONS: NAFLD assessed by CT, in addition to CACS and FRS, could be useful for identifying T2DM patients at higher risk of cardiovascular events.

Mn 2p resonant X-ray emission clarifies the redox reaction and charge-transfer effects in LiMn2O4.

High-energy-resolution soft X-ray emission spectroscopy (XES) was applied to understand the changes in the electronic structure of LiMn2O4 upon Li-ion extraction/insertion. Mn 2p-3d-2p resonant XES spectra were analyzed by configuration-interaction full-multiplet (CIFM) calculations, which reproduced both dd and charge-transfer (CT) excitations. From the resonant XES spectra it is found that Mn3+ and Mn4+ coexist in the initial state, while this changes into Mn4+ in the charged-state. For the discharged-state, the Mn3+ component appears again although the dd excitations are slightly modified from those for the initial state. Furthermore, negative CT energy is expected for the Mn4+ configuration, which suggests very strong hybridization between the Mn 3d and O 2p orbitals. The large difference in the CT effect between the Mn4+ and Mn3+ states should give mechanical stress to the Mn-O bond during charge-discharge cycling, leading to capacity fading.

Operando soft X-ray emission spectroscopy of the Fe2O3 anode to observe the conversion reaction.

Drastic electronic-structure changes in an Fe2O3 thin film anode for a Li-ion battery during discharge (lithiation) and charge (delithiation) processes were observed using operando Fe 2p soft X-ray emission spectroscopy (XES). The conversion reaction forming metallic iron due to the lithiation reaction was confirmed by operando XES in combination with the analysis using full-multiplet calculation. The valence of Fe at the open-circuit voltage (OCV) before the second cycle was not Fe3+, but Fe2+ with a weak p-d hybridization, suggesting a considerable irreversibility upon the first discharge-charge cycle and a weakened Fe-O bond after the first cycle. Moreover, we revealed that the Fe 3d electronic-structure change during the second cycle was to some extent reversible as Fe2+ (2.7 V vs. Li/Li+: open circuit voltage) → Fe0 (0.1 V vs. Li/Li+: discharged) → Fe(2+δ)+ (3.0 V vs. Li/Li+: charged). This operando Fe 2p XES in combination with the full-multiplet calculation provides detailed information for redox chemistry during a discharge-charge operation that cannot be obtained by other methods such as crystal-structure and morphology analyses. XES is thus very powerful for investigating the origin and limitation of the lithiation function of anodes involving conversion reactions.

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity.

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance-improved and cost-reduced solid-solution alloy nanoparticles of the Cu-Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cux Ru1-x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.

Large Charge-Transfer Energy in LiFePO4 Revealed by Full-Multiplet Calculation for the Fe L3 -edge Soft X-ray Emission Spectra.

We analyzed the Fe 3d electronic structure in LiFePO4 /FePO4 (LFP/FP) nanowire with a high cyclability by using soft X-ray emission spectroscopy (XES) combined with configuration-interaction full-multiplet (CIFM) calculation. The ex situ Fe L2,3 -edge resonant XES (RXES) spectra for LFP and FP are ascribed to oxidation states of Fe2+ and Fe3+ , respectively. CIFM calculations for Fe2+ and Fe3+ states reproduced the Fe L3 RXES spectra for LFP and FP, respectively. In the calculations for both states, the charge-transfer energy was considerably larger than those for typical iron oxides, indicating very little electron transfer from the O 2p to Fe 3d orbitals and a weak hybridization on the Fe-O bond during the charge-discharge reactions.

Solid-Solution Alloy Nanoparticles of the Immiscible Iridium-Copper System with a Wide Composition Range for Enhanced Electrocatalytic Applications.

For the first time, we synthesize solid-solution alloy nanoparticles of Ir and Cu with a size of ca. 2 nm, despite Ir and Cu being immiscible in the bulk up to their melting over the whole composition range. We performed a systematic characterization on the nature of the Irx Cu1-x solid-solution alloys using powder X-ray diffraction, scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. The results showed that the Irx Cu1-x alloys had a face-centered-cubic structure; charge transfer from Cu to Ir occurred in the alloy nanoparticles, as the core-level Ir 4f peaks shifted to lower energy region with the increase in Cu content. Furthermore, we observed that the alloying of Ir with Cu enhanced both the electrocatalytic oxygen evolution and oxygen reduction reactions. The enhanced activities could be attributed to the electronic interaction between Ir and Cu arising from the alloying effect at atomic-level.

Investigation of the relationship between the cycle performance and the electronic structure in LiAlxMn2-xO4 (x = 0 and 0.2) using soft X-ray spectroscopy.

Al doping into LiMn2O4 is one of the well-known methods to improve the cycle performance of the LiMn2O4 cathode. We carried out soft X-ray emission spectroscopy (XES) for LiMn2O4 and LiAl0.2Mn1.8O4 to elucidate the relationship between the Mn 3d electronic structures and cycle performances. After the first cycle, the XES spectra of LiAl0.2Mn1.8O4 are almost unchanged compared to the initial state. In contrast, charge-transfer excitation for the XES of LiMn2O4 is significantly reduced, indicating that the Mn 3d-O 2p hybridization in LiMn2O4 should be easily weakened by charge-discharge. In LiAl0.2Mn1.8O4, the Mn-O bond becomes more stable due to the decrease of Mn3+ ions with Jahn-Teller distortion by Al3+ doping, resulting in the improved cycle performance.

Correlation between the O 2p Orbital and Redox Reaction in LiMn0.6 Fe0.4 PO4 Nanowires Studied by Soft X-ray Absorption.

The changes in the electronic structure of LiMn0.6 Fe0.4 PO4 nanowires during discharge processes were investigated by using ex situ soft X-ray absorption spectroscopy. The Fe L-edge X-ray absorption spectrum attributes the potential plateau at 3.45 V versus Li/Li+ of the discharge curve to a reduction of Fe3+ to Fe2+ . The Mn L-edge X-ray absorption spectra exhibit the Mn2+ multiplet structure throughout the discharge process, and the crystal-field splitting was slightly enhanced upon full discharge. The configuration-interaction full-multiplet calculation for the X-ray absorption spectra reveals that the charge-transfer effect from O 2p to Mn 3d orbitals should be considerably small, unlike that from the O 2p to Fe 3d orbitals. Instead, the O K-edge X-ray absorption spectrum shows a clear spectral change during the discharge process, suggesting that the hybridization of O 2p orbitals with Fe 3d orbitals contributes essentially to the reduction.

Anisotropic charge-transfer effects in the asymmetric Fe(CN)5NO octahedron of sodium nitroprusside: a soft X-ray absorption spectroscopy study.

The electronic structure of Na2[Fe(CN)5NO]·2H2O (sodium nitroprusside: SNP) was investigated by using soft X-ray absorption (XA) spectroscopy. The Fe L2,3-edge XA spectrum of SNP exhibited distinct and very large satellite peaks for L3 and L2 regions, which is different from the spectra of hexacyanoferrates and the other iron compounds. A configuration-interaction full-multiplet calculation, in which the ligand molecular orbitals for the C4v symmetry were taken into account, revealed the Fe(2+) low-spin state with very strong effects of metal-to-ligand charge-transfer from the Fe 3d to NO 2p orbitals.

Phase Control of Solid-Solution Nanoparticles beyond the Phase Diagram for Enhanced Catalytic Properties.

The crystal structure, which intrinsically affects the properties of solids, is determined by the constituent elements and composition of solids. Therefore, it cannot be easily controlled beyond the phase diagram because of thermodynamic limitations. Here, we demonstrate the first example of controlling the crystal structures of a solid-solution nanoparticle (NP) entirely without changing its composition and size. We synthesized face-centered cubic (fcc) or hexagonal close-packed (hcp) structured Pd x Ru1-x NPs (x = 0.4, 0.5, and 0.6), although they cannot be synthesized as bulk materials. Crystal-structure control greatly improves the catalytic properties; that is, the hcp-Pd x Ru1-x NPs exceed their fcc counterparts toward the oxygen evolution reaction (OER) in corrosive acid. These NPs only require an overpotential (η) of 200 mV at 10 mA cm-2, can maintain the activity for more than 20 h, greatly outperforming the fcc-Pd0.4Ru0.6 NPs (η = 280 mV, 9 min), and are among the most efficient OER catalysts reported. Synchrotron X-ray-based spectroscopy, atomic-resolution electron microscopy, and density functional theory (DFT) calculations suggest that the enhanced OER performance of hcp-PdRu originates from the high stability against oxidative dissolution.

An Element-Based Generalized Coordination Number for Predicting the Oxygen Binding Energy on Pt3M (M = Co, Ni, or Cu) Alloy Nanoparticles.

We studied the binding energies of O species on face-centered-cubic Pt3M nanoparticles (NPs) with a Pt-skin layer using density functional theory calculations, where M is Co, Ni, or Cu. It is desirable to express the property by structural parameters rather than by calculated electronic structures such as the d-band center. A generalized coordination number (GCN) is an effective descriptor to predict atomic or molecular adsorption energy on Pt-NPs. The GCN was extended to the prediction of highly active sites for oxygen reduction reaction. However, it failed to explain the O binding energies on Pt-skin Pt150M51-NPs. In this study, we introduced an element-based GCN, denoted as GCNA-B, and considered it as a descriptor for supervised learning. The obtained regression coefficients of GCNPt-Pt were smaller than those of the other GCNA-B. With increasing M atoms in the subsurface layer, GCNPt-M, GCNM-Pt, and GCNM-M increased. These factors could reproduce the calculated result that the O binding energies of the Pt-skin Pt150M51-NPs were less negative than those of the Pt201-NPs. Thus, GCNA-B explains the ligand effect of the O binding energy on the Pt-skin Pt150M51-NPs.

Density Functional Theory and Machine Learning Description and Prediction of Oxygen Atom Chemisorption on Platinum Surfaces and Nanoparticles.

Elucidating chemical interactions between catalyst surfaces and adsorbates is crucial for understanding surface chemical reactivity. Herein, interactions between O atoms and Pt surfaces and nanoparticles are described as a linear combination of the properties of pristine surfaces and isolated nanoparticles. The energetics of O chemisorption onto Pt surfaces were described using only two descriptors related to surface geometrical features. The relatively high coefficient of determination and low mean absolute error between the density functional theory-calculated and predicted O binding energies indicate good accuracy of the model. For Pt nanoparticles, O binding is described by the geometrical features and electronic properties of isolated nanoparticles. Using a linear combination of five descriptors and accounting for nanoparticle size effects and adsorption site types, the O binding energy was estimated with a higher accuracy than with conventional single-descriptor models. Finally, these five descriptors were used in a general model that decomposes O binding energetics on Pt surfaces and nanoparticles. Good correlation was achieved between the calculated and predicted O binding energies, and model validation confirmed its accuracy. This is the first model that considers the nanoparticle size effect and all possible adsorption sites on Pt nanoparticles and surfaces.

Highly Stable and Active Solid-Solution-Alloy Three-Way Catalyst by Utilizing Configurational-Entropy Effect.

Since 1970, people have been making every endeavor to reduce toxic emissions from automobiles. After the development of a three-way catalyst (TWC) that concurrently converts three harmful gases, carbon monoxide (CO), hydrocarbons (HCs), and nitrogen oxides (NOx ), Rh became an essential element in automobile technology because only Rh works efficiently for catalytic NOx reduction. However, due to the sharp price spike in 2007, numerous efforts have been made to replace Rh in TWCs. Nevertheless, Rh remains irreplaceable, and now, the price of Rh is increasing significantly again. Here, it is demonstrated that PdRuM ternary solid-solution alloy nanoparticles (NPs) exhibit highly durable and active TWC performance, which will result in a significant reduction in catalyst cost compared to Rh. This work provides insights into the design of highly durable and efficient functional alloy NPs, guiding how to best take advantage of the configurational entropy in addition to the mixing enthalpy.

Distinguishing between High- and Low-Spin States for Divalent Mn in Mn-Based Prussian Blue Analogue by High-Resolution Soft X-ray Emission Spectroscopy.

We combine Mn L2,3-edge X-ray absorption, high resolution Mn 2p-3d-2p resonant X-ray emission, and configuration-interaction full-multiplet (CIFM) calculation to analyze the electronic structure of Mn-based Prussian blue analogue. We clarified the Mn 3d energy diagram for the Mn(2+) low-spin state separately from that of the Mn(2+) high-spin state by tuning the excitation energy for the X-ray emission measurement. The obtained X-ray emission spectra are generally reproduced by the CIFM calculation for the Mn(2+) low spin state having a stronger ligand-to-metal charge-transfer effect between Mn t2g and CN π orbitals than the Mn(2+) high spin state. The d-d-excitation peak nearest to the elastic scattering was ascribed to the Mn(2+) LS state by the CIFM calculation, indicating that the Mn(2+) LS state with a hole on the t2g orbital locates near the Fermi level.