Exploring environmental sustainability in dentistry among students and educators in the United Arab Emirates: a cross-sectional survey.

OBJECTIVES: Creating environmentally sustainable healthcare culture within the dental field requires embedding the content in the dental curriculum at the undergraduate level. This study aimed to explore the current awareness and drivers among dental students and educators regarding environmentally sustainable dentistry (ESD) in the United Arab Emirates (UAE) and identify barriers and enablers to embrace it. METHODS: A cross-sectional survey using online questionnaires was carried out in six undergraduate dental education institutes within the UAE. Data analysis included descriptive statistics. RESULTS: In total 153 students and 53 educators participated in the survey. Most students and educators were not aware of any ESD content in their curricula. However, the majority of educators were familiar with the concept of ESD, while students were mostly unfamiliar or slightly familiar. Nonetheless, students largely agreed on its importance and their interest in learning it, as they viewed it relevant to their future practice. Educators agreed that the dental profession has a responsibility to be environmentally friendly and expressed their desire in introducing ESD content into the curricula. Several barriers were reported such as lack of knowledge, curricula space, educational resources, and time. Meanwhile, enablers included providing ESD capacity building, training and resources. CONCLUSIONS: There was no explicit presence of ESD content in the dental curricula in the UAE. Despite the lack of adequate awareness on this topic among educators and more so among students, they both had positive views towards incorporating ESD into dental curricula. Overall, this study highlighted the importance of promoting ESD in dental programs. CLINICAL SIGNIFICANCE: ESD is gradually becoming a critical aspect of modern oral healthcare system. It has been mandated in the dental curricula in several regions globally. Embedding ESD in the UAE dental curricula would have several benefits for the environment as well as the future of the dental profession in the region. The clinical significance includes, but not limited to, improved treatment outcomes; patients, students and staff health and well-being; reduced health risks, and cost savings.

The bleaching effect of office bleaching agents containing S-PRG filler evaluated by pH value and electron spin resonance.

OBJECTIVES: Surface reaction-type pre-reacted glass-ionomer (S-PRG) filler releases six types of ions with a neutralizing ability. This study evaluated the effect of S-PRG filler incorporation in an H2O2-based bleaching material on the bleaching efficacy, pH, and reaction state. MATERIALS AND METHODS: The experimental bleaching material was formulated by the addition of 5% or 10% S-PRG fillers to the powder part. The stained bovine teeth were treated with the prepared bleaching paste. Commission internationale de l'éclairage (CIE) L*a*b* color space values were recorded before and after bleaching, and the color difference (ΔE) and whiteness index (WID) were calculated. Moreover, the used bleaching formulations were assessed for their pH values and reaction state by evaluating the oxidation state of manganese (Mn+2) using electron spin resonance (ESR). RESULTS: The results of ΔE and WID showed that the addition of S-PRG filler increased the bleaching effect, but there was no significant difference between the groups with 5% and 10% S-PRG filler. A significant increase in pH in S-PRG filler groups (5% pH 6.7, 10% pH 6.8) was found compared to the 0% group (pH 4.8). ESR measurements showed that the signal emitted from Mn+2 decreased over time. The S-PRG filler groups showed a significantly higher reduction in Mn+2 compared to the 0% group, with no significant difference between the 5% and 10% S-PRG groups. CONCLUSIONS: S-PRG filler addition resulted in improved bleaching efficacy, higher reaction rate, and pH values that are close to neutral. CLINICAL RELEVANCE: S-PRG filler addition may be effective on the bleaching outcome of H2O2-based materials.

The effect of phytic acid on enzymatic degradation of dentin.

We evaluated the effect of phytic acid on matrix metalloproteinase (MMP)- or cysteine cathepsin (CC)-mediated dentin degradation. Demineralized dentin beams were divided into five groups (n = 12) and treated with 1%, 2%, or 3% phytic acid or with 37% phosphoric acid. Untreated demineralized beams served as controls. After incubation for 1 or 3 wk, dry mass loss was determined and aliquots of incubation media were analysed for cross-linked telopeptide of type I collagen (ICTP) fragments for MMP-mediated and c-terminal telopeptide of type I collagen (CTX) for cathepsin-k-mediated degradation. The direct effect of phytic acid was evaluated using MMP activity assay. Data were analysed using repeated-measures anova. ICTP releases with 1% and 2% phytic acid treatment were statistically significantly lower than those following phosphoric acid treatment at 3 wk. The CTX release for phytic acid-treated beams at 3 wk was not significantly different from that of untreated control beams, but it was significantly lower than that of phosphoric acid-treated beams. Their MMP activities at 3 wk were not significantly different from those of the controls but they were significantly lower than those seen for phosphoric acid-treated beams. Compared to phosphoric acid, phytic acid treatment resulted in a reduced dentinal host-derived endogenous enzymatic activity and collagen degradation.

The effect of surface pre-reacted glass-ionomer filler eluate on dental pulp cells and mineral deposition on dentin: In vitro study.

The effects of surface pre-reacted glass-ionomer (S-PRG) filler on pulpal cells and on the composition of dentinal deposits were investigated. Proliferation (CCK-8), cytotoxicity (LDH), and differentiation activity (ALP) tests, along with cell morphology observations, were conducted at 6 and 24 h after treatment of pulpal cells with different S-PRG filler eluate concentrations. Dentinal surfaces were immersed in deionized water or S-PRG filler eluate followed by immersion in deionized water or simulated body fluid and observed under scanning electron microscope and elemental analysis using energy dispersive x-ray spectrometer. At 24 h, there were significant differences in CCK-8 and ALP activity values between the groups in a concentration-dependent manner. LDH test data were not significantly different among the groups. Cell morphology was not altered at either exposure time. However, decreased cellular density was observed with the highest eluate concentration. Crystalline deposits and occluded dentinal tubules were observed in samples immersed in S-PRG filler with a later immersion in simulated body fluid, which also showed higher concentrations of certain ions compared to surfaces that were not initially treated with S-PRG filler. The lowest two eluate concentrations did not show significant toxicity. S-PRG enhanced the effect of simulated body fluid in the formation of mineral deposits.

Influence of additional apical enlargement on microcrack formation in root dentine: a micro-computed tomography investigation.

OBJECTIVES: To assess the effect of additional apical enlargement using nickel titanium (NiTi) instruments on the incidence of microcracks using micro-computed tomographic analysis. MATERIALS AND METHODS: Fifty-one premolars with single canals were enlarged to ProTaper Gold (PTG) F2 (25/08) (Dentsply Sirona), ProFile Vortex Blue (VB) 25/06 (Dentsply Tulsa), or WaveOne Gold (WOG) primary (25/07) (Dentsply Sirona) NiTi rotary instruments (n = 17 each). Afterward, additional apical enlargement was performed in each group with its corresponding larger instrument (F3 (30/09), VB 30/06, or WOG Medium (35/06) instruments, respectively). All teeth were imaged with micro-computed tomography before canal enlargement and after initial and additional apical enlargements to detect new microcracks at the apical 5 mm. An Aligned Rank Transform ANOVA was conducted to examine the effects of file type and canal enlargement on the number of new microcracks resulting from enlargement. A Kruskal-Wallis test was run to compare the file types at each canal enlargement stage. RESULTS: A significant main effect (P = 0.026) of canal enlargement on the number of new microcracks was found; the number of apical microcracks found after additional enlargement was significantly greater than baseline (P = 0.021); no significant difference was found between baseline and initial enlargement (P = 0.506) and between initial enlargement and additional enlargement (P = 0.252). The Kruskal-Wallis tests found no difference between file types at baseline (P = 0.348), after initial enlargement (P = 0.369) or additional enlargement (P = 0.133). CONCLUSIONS: Regardless of the instrumentation system used, additional apical enlargement led to the formation of high number of new microcracks. CLINICAL SIGNIFICANCE: The results indicated that additional enlargement induced significant number of apical microcracks.

The effect of different conditioning agents on dentin roughness and collagen structure.

OBJECTIVES: To assess the impact of various organic and inorganic acids on the roughness, demineralization, and collagen secondary structures of human dentin and to compare these effects with those of traditional agents, specifically phosphoric acid (PA) and ethylenediaminetetraacetic acid (EDTA). METHODS: Coronal dentin discs (n = 10) were examined by optical profilometry (roughness) and ATR-FTIR before and after conditioning with 32 % PA, 3 % nitric acid (NA), 20 % citric acid (CA), 20 % phytic acid (IP6) or 17 % EDTA. Spectra data were processed to quantify dentin demineralization (DM%) and percentage area of amide I curve-fitted components of ß-turns, 310-helix, α-helix, random coils, ß-sheets, and collagen maturation index. Statistical analysis was performed by one-way ANOVA or Kruskal-Wallis for DM% and roughness parameters, and paired t-test/Wilcoxon test for amide I components at significance level set at α = 0.05. RESULTS: All treatments resulted in increased roughness parameters, with the most significant changes occurring primarily with PA, while EDTA exhibited the least changes. DM% was NA>PA>IP6>CA>EDTA in a descending order. Regarding amide I components, NA demonstrated a significant reduction in ß-turns, 310-helices, and α-helices and it increased ß-sheets and random coils. PA resulted in reduction in ß-turns and α-helices while it increased ß-sheets. CA and EDTA did not cause significant changes. The collagen maturation index significantly increased only after IP6 treatment. CONCLUSIONS: The effect on dentin roughness parameters, demineralization, and collagen secondary structures varied based on the type of dentin surface treatment. CLINICAL SIGNIFICANCE: Understanding the impact of acids on the intrinsic properties of dentin is clinically essential for gaining insights into how these effects influence adhesion to dentin, the long-term stability of resin-based restorations, and the success of remineralization therapies.

In Vitro Investigation of the Effects of Various Reducing Agents on Dentin Treated with Hydrogen Peroxide.

We assessed the effect of non-protein thiols (NPSH), reduced glutathione (GSH) and n-acetylcysteine (NAC), on resin shear bond strength (SBS) to hydrogen peroxide (H2O2)-treated dentin, and their effects on the characteristics of dentin in comparison to ascorbic acid (AA) and sodium thiosulfate (STS). H2O2-treated dentin was conditioned with 5% AA, GSH, NAC, or STS applied for 1 or 5 min. The positive control group received H2O2 without antioxidant application, and the first negative control group received distilled water (DW). The specimens received resin bonding immediately after treatment except for the second negative control group (delayed bonding). Microhardness, roughness, and topography were studied. The SBS values of all antioxidants were statistically greater than the positive control group (p < 0.05); however, NAC and AA applied for 1 min demonstrated the highest values, which were comparable to delayed bonding. All treatments removed the smear layer except DW, H2O2, and STS. The negative effect of H2O2 on resin-dentin bonding was mitigated by the application of the antioxidants; however, their efficiencies were dependent on the antioxidant type and time of application. NAC was more effective in optimizing resin bonding to bleached dentin compared to GSH at 1 min application and STS at both application times but was comparable to AA. Negligible negative effects on the substrate's roughness and microhardness were detected. The antioxidant properties of the agent and its capacity to remove the smear layer are the processes underpinning the ability of a certain antioxidant to reverse the effect of H2O2 on bonding.

Effect of phytic acid on chemical, structural, and mechanical characteristics of nickel-titanium endodontic files.

This study investigated phytic acid (IP6) effect on chemical, structural, and mechanical characteristics of nickel-titanium (NiTi) files. The tested files were equally divided into groups according to the immersion protocol: sodium hypochlorite (NaOCl), ethylenediaminetetraacetic acid (EDTA), IP6, EDTA followed by NaOCl, and IP6 followed by NaOCl. These groups were then compared in terms of Ni, Ti, and chromium (Cr) ions release from the files. Microstructural changes using field emission scanning electron microscope (Fe-SEM) and energy dispersive X-ray spectroscopy (EDX) and surface roughness were analyzed. The mechanical characterization was conducted using cyclic fatigue resistance test. Fractured segments were scanned under SEM. Statistical analysis was performed using one-way ANOVA, Tukey test, Kruskal-Wallis test and Mann-Whitney U test. Results showed that NaOCl caused significant release of Cr, followed by IP6 and EDTA (P < 0.05). When files were pre-immersed in EDTA, NaOCl tended to induce less release of Ti and Cr. EDX evaluation revealed that the main surface elements were Ni, Ti, carbon, and oxygen. EDTA group contained the highest amount of carbon, while the control group showed the lowest. Surface roughness evaluation revealed no significant differences between groups despite the minor increases after immersion in certain groups. Black areas were observed in the NaOCl group which indicated corrosion. However, the cyclic fatigue test showed no significant differences between the groups.

Effect of phytic acid used as etchant on bond strength, smear layer, and pulpal cells.

This study aimed to evaluate the effect of phytic acid (IP6), used as etchant, on resin-dentin bond strength, smear layer removal, and the viability of pulpal cells. Flat dentin surfaces with smear layer were etched with 1% IP6 for 60, 30, or 15 s; in the control group 37% phosphoric acid (PA) was used. Dentin surfaces were rinsed, blot-dried, and bonded with an etch-and-rinse adhesive, followed by composite build-ups. The specimens were subjected to tensile testing after 24 h of water storage at 37°C, and failure modes were determined using scanning electron microscopy. The effectiveness of IP6 to remove the smear layer was observed using scanning electron microscopy. To evaluate the effect on pulpal cells, solutions of 0.1 and 0.01% IP6 and of 3.7 and 0.37% PA were prepared and rat pulpal cells were treated with these solutions for 6 and 24 h. Cell viability was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The results demonstrated that all application times of IP6 produced bond-strength values that were significantly higher than that of the control. Phytic acid effectively removed the smear layer and plugs, thus exposing the collagen network. Phytic acid had a minimal effect on pulpal cells, whereas PA resulted in a marked decrease in their viability.

Phytic Acid Demonstrates Rapid Antibiofilm Activity and Inhibits Biofilm Formation When Used as a Surface Conditioning Agent.

Root canal infections are associated with biofilms and are treated with chemical irrigants with a high success rate. However, treatment failure does arise, which is attributed primarily to resistance exhibited by biofilms. Currently used irrigants in root canal treatment have disadvantages, and there is therefore a need for more biocompatible alternatives with antibiofilm properties to reduce root canal treatment failure and complications. The aim of this study was to evaluate the in vitro antibiofilm properties of phytic acid (IP6), which is a potential alternative treatment agent. Single- and dual-species biofilms of Enterococcus faecalis and Candida albicans were developed on the well surfaces of 12-well plates and on hydroxyapatite (HA) coupons, and then exposed to IP6. In addition, selected HA coupons were preconditioned with IP6 before biofilm development. IP6 demonstrated bactericidal effects and altered the metabolic activity of biofilm cells. Confocal laser-scanning microscopy showed that IP6 caused significant and rapid reduction in live biofilm cells. At sublethal concentrations, IP6 did not alter the expression of tested virulence genes except for C. albicans hwp1, the expression of which was upregulated but not reflected by a change in hyphal transformation. IP6-preconditioned HA coupons led to extensive inhibition of dual-species biofilm formation. The results of this study highlight for the first time the antibiofilm inhibitory properties of IP6 and the potential for its exploitation in several clinical applications. IMPORTANCE Root canal infections are biofilm associated, and despite mechanical and chemical treatment procedures, infection recurrence occurs, and this is likely due to the high tolerance of associated biofilms to antimicrobials. The currently used treatment agents have several disadvantages, which necessitates the search for new improved agents. In this study, the natural chemical phytic acid was found to exhibit antibiofilm activity against established mono and dual mature biofilms over a short contact time. Most importantly, phytic acid was found to cause significant inhibition of dual-species biofilm formation when used as a surface preconditioning agent. The findings of this study identified a novel use of phytic acid as a potential antibiofilm agent that can be used in several clinical applications.

In Vitro Cytotoxicity and Mineralization Potential of an Endodontic Bioceramic Material.

OBJECTIVE: The interest in bioceramic materials has been steadily growing for different applications in endodontics. With the continued introduction of new bioceramic-based materials into the market, it is of great importance to assess the biocompatibility before providing recommendations on their clinical use. This study evaluated the in vitro cytotoxicity and mineralization potential of two consistencies of unset premixed bioceramic material (TotalFill BC RRM putty and TotalFill BC sealer) compared with an epoxy resin-based sealer (AH Plus) on osteoblast cells. MATERIALS AND METHODS: Overall, 100% extracts were obtained by weighing 0.1 g of each material in 1 mL of cell culture media. Primary human osteoblast (HOB) cells (n = 4) were treated with different concentrations (100, 50, 25, 12.50, and 6.25%) of each extract. XTT assay and Alizarin Red S staining were used to evaluate the cytotoxic effect and the biomineralization potential, respectively. STATISTICAL ANALYSIS: Data were analyzed by one-way analysis of variance followed by Tukey's post hoc tests. RESULTS: The cytotoxicity assay after 24 h treatment showed that all materials at high concentrations of the extract (100 and 50%) were toxic to HOB (p < 0.001). On the contrary to TotalFill BC RRM Putty, AH Plus and TotalFill BC sealer were toxic at 25% concentration. However, at 12.5% concentration and lower, all materials were nontoxic. The mineralization potential analyzed after 7 and 14 days showed that TotalFill BC material-treated cells could deposit mineralized nodules in the normal and osteogenic medium unlike AH plus-treated cells. CONCLUSION: At low concentrations, TotalFill BC materials showed higher biocompatibility to HOB cells than AH Plus, enhanced the viability of the cells, maintained their typical morphology, and induced the formation of mineralized nodules. Despite the encouraging data, clinical trials are needed to identify the effect of this material on the long-term outcome of endodontic treatment.

Effect of an In-Office Bleaching Agent with Surface Pre-Reacted Glass-Ionomer Filler on the Enamel Surface: A In-Vitro Study.

In-office bleaching with high concentrations of hydrogen peroxide (H2O2) agents causes undesirable alterations in the enamel. Surface pre-reacted glass-ionomer (S-PRG) filler is a functional material known for its acid-neutralizing and demineralization-inhibition properties. This study evaluates the effect of S-PRG filler incorporation in H2O2-based bleaching on the enamel surface. Bovine enamel surfaces were bleached using a bleaching paste formulated with a liquid (35% H2O2) and a powder containing 5% or 10% S-PRG filler. The surface roughness and the Vickers microhardness of the treated enamel surfaces were evaluated. The enamel surfaces were observed under a scanning electron microscope (SEM) and analyzed using energy dispersive X-ray (EDX) technology. The surfaces were challenged by citric acid and observed by SEM. The specimens bleached with the paste containing the S-PRG filler showed lower enamel surface roughness and higher microhardness values than did those bleached with the plain paste (0% S-PRG filler); meanwhile, there were no significant differences between the 5% or 10% S-PRG filler groups. The S-PRG filler groups showed enamel surface morphologies similar to those of the non-bleached enamel, according to SEM observation, and EDX analysis detected the presence of fluoride and strontium ions. The S-PRG filler groups showed a higher resistance to erosion. The S-PRG filler mitigated the detrimental effects of bleaching agents on the enamel surface and provided resistance to erosion.

Effect of phytic acid on dentinal collagen solubilization and its binding and debinding potentials to dentin.

OBJECTIVES: To study phytic acid (IP6) effect on collagen solubilization by assessing hydroxyproline (HYP) release, evaluate its binding to demineralized (DD) and mineralized dentin (MD) and determine the effect of different media on debinding of IP6. METHODS: Demineralized dentin beams were incubated in 1%, 2% or 3% IP6 and HYP release was evaluated at 1 or 3 weeks and compared to those obtained in untreated control or phosphoric acid (PA)-treated beams. DD or MD powder was treated with 1%, 2% or 3% IP6 and the decrease in IP6 amount was quantitated by ultraviolet-visible spectroscopy. IP6-treated samples were re-suspended in distilled water, ethanol, urea or sodium chloride and the amount of IP6 displaced was determined. RESULTS: At 1 week, the control group and IP6 showed lower HYP release when compared to PA (P < 0.05). There was no difference among PA, IP6 and control at 3 weeks (P = 0.22). IP6 binding was concentration dependent. 1% IP6 had higher binding potential with MD compared to DD while 2% IP6 showed the opposite result (P<0.05). 3% IP6 had similar binding values between DD and MD (P = 0.53). The highest debinding in MD occurred with urea for 2%, 3% and 1% IP6 in descending manner. Within each concentration of IP6 in DD, the highest debinding effect was reported with ethanol. CONCLUSIONS: IP6 bound to DD and MD in a concentration-dependent manner. IP6 was debound from DD mostly by the action of ethanol, while in MD, urea caused the most displacement. Collagen solubilization of IP6-treated DD was comparable to untreated DD. CLINICAL SIGNIFICANCE: These findings add to the potential use of IP6 as an alternative to PA for dentin etching which possibly results in long-term stability of resin-dentin adhesion.

Effect of different chelating agents on the shear bond strength of calcium silicate-based cements to coronal dentin.

We evaluated the shear bond strength (SBS) of mineral trioxide aggregate (MTA) and Biodentine (BD) to coronal dentin after treatment with ethylenediaminetetraacetic acid (EDTA), phytic acid (IP6), or etidronic acid (HEDP). Sodium hypochlorite-treated dentin surfaces were randomly divided into four groups according to conditioning protocol namely, 17% EDTA, 2.5% IP6, 9% HEDP, or distilled water (DS). Specimens were further divided according to the type of cement placed on conditioned dentin and SBS was tested. The results showed that DS/MTA and IP6/MTA groups had the highest values, and there was no significant difference between these two groups. IP6/BD group showed a lower SBS value compared to IP6/MTA; however, this did not reach the level of significance. The BS to dentin was influenced by the type of calcium silicate material and chelating agent. IP6 either improved or maintained the bonding while EDTA and HEDP showed a negative or no influence effect.

Thermal Sensing of Photo-Activated Dental Resin Composites Using Infrared Thermography.

OBJECTIVE: The goal of this study was to compare the pulp temperature increase during light curing of different composite thicknesses in deep class I cavities using two thermal sensing tools. METHODOLOGY: Round occlusal class I cavities with a remaining dentin thickness (RDT) of 1 mm from the cavity floor were performed on 15 extracted sound molars. Samples were divided into three groups (n = 5). In group A, cavities were restored using the Filtek Z350 XT conventional composite through the incremental filling technique, whereas group B cavities were restored using the Filtek Bulk-Fill flowable composite through the bulk-fill technique. Specimens of the Filtek Bulk-Fill flowable composite using the incremental filling technique were used to restore cavities in group C. An infrared thermal camera (IRT; Flir, Wilsonville, OR, USA) and K-type thermocouple (Perfect Prime TC0520, New York, NY, USA) were used to measure the heat generated during composite photo-polymerization. RESULTS: There were no significant differences within the same group using either the thermocouple or IRT (p > 0.05). One-way ANOVA showed no significant differences between groups A and C (p > 0.05), whereas group B was significantly different from groups A and C with each sensing tool (p < 0.05). CONCLUSION: IRT and thermocouple heat readings were comparable. Based on the current findings, the bulk-fill technique resulted in the lowest heat generation among the groups. Therefore, increasing the light-curing time and the number of composite increments was directly correlated with increases in intra-pulpal temperature.

The Blending Effect of Single-Shade Composite with Different Shades of Conventional Resin Composites-An In Vitro Study.

OBJECTIVES: Single-shade composite systems are gaining popularity among clinicians due to the claimed potential of blending with different tooth structure shades while restoring the tooth. The purpose of this study was to evaluate the blending effect of two single-shade composite with different shades of conventional resin composite systems. MATERIALS AND METHODS: Seventy-two composite cylinders of B1, B2, A1, A2, A3, or A3.5 shade from CharmFil Plus (CP) and Filtek Universal Restorative (3M) were prepared using custom-made silicone mold. Single-shade composite OMNICHROMA (OC) or Beautifil II Enamel (BE) was placed in the center of each cylinder and polymerized. The color parameters, lightness (L*), chroma (C*), and hue (H*) of each composite were measured using a color chronometer. Furthermore, color stability of the samples was evaluated after 1-week staining challenge. STATISTICAL ANALYSIS: Multivariant analysis was performed to evaluate the effect of material and shade on the color parameters. Multiple comparisons of the data were performed using post hoc test. The staining challenge data were analyzed using repeated measure analysis of variance and paired sample T-test. RESULTS: The multivariant analysis showed a statistically significant difference in color parameters among CP, 3M, OC, and BE (p = 0.001). Image analysis showed a visual blending effect for both OC and BE for certain shades; however, some color contrast with the darker shades was observed. The C* value of OC showed a similar pattern to CP; however, the H* of the latter was closely followed by BE. The L* value showed statistically significant difference among the shades of 3M, and in OC and BE when blended with 3M. CONCLUSION: All four materials used in this study showed color alteration after the staining challenge. Single-shade composite can blend with only certain shades of resin composites.

Retreatment of oval-shaped root canals filled with TotalFill bioceramic or AH plus sealer.

This study investigated retreatment of oval canals filled with gutta-percha and different sealers using WaveOne Gold (WOG). Single oval canals were prepared to size 30, 0.04 and obturated with gutta percha and AH Plus (AHP) or TotalFill bioceramic (TFBC) sealer. After 6-month incubation, the canals were retreated with WOG Primary (25, 0.07) under simulated body temperature, and the developed load and torque were simultaneously measured. The time and regaining the apical patency were checked. Micro-computed tomography scanning was performed to calculate the remaining obturating materials. An independent t-test and chi-square test were performed at a 95% confidence level. A shorter retreatment time was needed in TFBC than in AHP (P = 0.003). However, a higher maximum apical load was reported with AHP (P = 0.000). Meanwhile, comparable maximum coronal load and maximum torque values were observed. Apical patency was regained in all TFBC roots and only 75% of the AHP samples (P = 0.217). The remaining obturating materials were comparable in TFBC (13.02 ± 8.12%) and AHP (10.11 ± 8.46%) (P = 0.398). WOG was able to remove 89.89% and 86.98% of obturating materials in TFBC and AHP, respectively. The TFBC presented lower apical loads and faster retreatment compared to AHP.

Tinnitus Prevalence and Associated Factors among Dental Clinicians in the United Arab Emirates.

Dental clinicians are at increased risk for developing tinnitus due to exposure to high levels of occupational noise. This study aimed to determine tinnitus prevalence and associated factors among dental clinicians. Interviews were conducted with 150 randomly selected dental clinicians using a questionnaire. Noise levels were measured at three points of time at the operating area. Tinnitus was reported in 19.33% of the participants. The average noise level was significantly higher among participants with tinnitus compared to those without the condition. More participants complained of intermittent tinnitus and the rest had the constant type, with the latter being significantly more bothersome. The weekly average time of using high-speed handpieces, suction and electric handpieces, age and experience had a significant effect on the presence of tinnitus. Only 2.7% of the participants reported the use of a hearing protection device. Tinnitus is a common finding among dental clinicians especially those with higher levels of occupational noise and more frequent use of noise-generating equipment. Knowledge of tinnitus prevalence aids in realizing the extent of its impact and making informed decisions. These results call for improved awareness of the negative impact of clinically-generated noise and emphasize the importance of preventive measures and periodic audiometry exams.

In Vitro Optical and Physical Stability of Resin Composite Materials with Different Filler Characteristics.

The objective of this study was to compare the physical and optical stability of resin composite materials with different filler characteristics. Ninety-six resin composite blocks (6 mm × 6 mm × 2 mm) were prepared using four different types of resin composite, divided into four groups. Specimens from the same material were randomly divided into four groups (n = 6) and allocated for Vickers hardness (VH), water sorption, solubility (WS/SL), and staining and aging challenges tests. One-way ANOVA showed significant differences in microhardness (p = 0.0001), WS (p = 0.0001), and SL (p = 0.003) among the tested groups. Beautifil II LS recorded the highest hardness, and CharmFil®Flow had the lowest value. Beautifil Injectable X and II LS showed negative WS, whereas the other groups had positive values. All groups showed positive SL. Repeated measures ANOVA showed significant color parameter alteration in the tested groups (p = 0.0001). All groups showed significant color shifting after one week of the staining challenge. Repeated measures ANOVA showed a significant color parameter (p = 0.0001) and weight (p = 0.001) alteration after the aging challenge. The optical and physical stability of resin composites may vary according to filler characteristics. Clinicians should choose the composite as per the desired outcome.

Phytic acid effect on periodontal ligament fibroblast: An in-vitro study.

OBJECTIVES: This study evaluated phytic acid (IP6) effect on the viability, alkaline phosphatase (ALP) activity and calcium release of human periodontal ligament (HPDL) cells in optimal (OGL) and elevated glucose level (EGL) in cell culture media. MATERIALS AND METHODS: Cells were seeded in OGL (1000mg/L) or EGL (4500 mg/L) media. IP6 was added at 0.005%, 0.01% or 0.02% concentrations for 24 or 48h, and XTT assay was performed. Cell differentiation and calcium release in presence of 0.02% IP6 in OGL or EGL in non-osteogenic or osteogenic media were analyzed using ALP assay and alizarin red staining, respectively. RESULTS: In OGL, IP6 enhanced the viability of the cells at both exposure times (P<0.05). However, IP6 lowered the viability of the cells with the presence of EGL compared to the control at both exposure times, except for 0.02% IP6 which showed comparable viability to the control at 48 h. In OGL and EGL, ALP activity of the cells was not affected by the presence of IP6 in non-osteogenic media; however, in osteogenic media IP6 lowered the ALP activity. Meanwhile, calcium release was the highest with IP6 within osteogenic media of EGL. CONCLUSIONS: IP6 effects on the HPDL cells were dependent on IP6 concentration, time of exposure, glucose levels and the osteogenic condition of the media. CLINICAL RELEVANCE: This study gives insights on the potential therapeutic effect of IP6 as adjunctive periodontal therapy in patients with diabetes.