Effect of Blue Light on Acne Vulgaris: A Systematic Review.

Acne is a dermatosis that affects almost 90% of the adolescent population worldwide and its treatment is performed with retinoids, antimicrobials, acids, and topical or systemic antibiotics. Side effects such as skin irritation in addition to microbial resistance to antibiotics are the main side effects found. Phototherapy with blue light is being used as an alternative treatment. Our objective was to analyze the use of blue light to treat inflammatory acne. We conducted a systematic literature review, following the recommendation PRISMA (Preferred Reporting Items for Systematic Reviews and MetaAnalyses), including in the sample randomized clinical trial studies that compared blue light with another intervention as control. The research was carried out in the PUBMED and WEB of SCIENCE databases and the methodological quality of the studies evaluated were made by the Cochrane Collaboration Bias Risk Scale. After the exclusion of duplicates, the titles and abstracts of 81 articles were evaluated, and 50 articles were selected for full reading, including in the review at the end 8 articles. Studies have shown significant improvements in the overall picture of acne. It is concluded that despite the great potential in its use in the treatment of acne, there is a need for more detailed trials on the effect of blue light on the treatment of inflammatory acne.

Photodynamic inactivation of planktonic cultures and Streptococcus mutans biofilms for prevention of white spot lesions during orthodontic treatment: An in vitro investigation.

INTRODUCTION: This study evaluated the efficacy of photodynamic inactivation (PDI) with hematoporphyrin IX (H) and modified hematoporphyrin IX (MH) at 10 µmol/L, using a blue light-emitting diode (LED), fluence of 75 J/cm,2 over planktonic cultures and biofilm of Streptococcus mutans (UA 159). METHODS: Suspensions containing 107 cells/mL were tested under different experimental conditions: a) H and LED (H+L+), b) MH and LED (MH+L+), c) only LED (P-L+), d) only H (H+L-), e) only MH (MH+L-), and f) control group, no LED or photosensitizer treatment (P-L-). The study also evaluated the effect of PDI on S mutans biofilm on metallic or ceramic brackets bonded on specimens of human teeth. The strains were seeded onto Mitis salivarius-bacitracin-sacarose agar to determine the number of colony-forming units. RESULTS: H and MH under LED irradiation were effective on planktonic cultures (P <0.0001). H and MH (H+L+ and MH+L+) caused a reduction of 3.80 and 6.78 log10 CFU/mL. PDI with the use of H or MH and LED exerted a strong antimicrobial effect over S mutans showing 54% and 100% reduction, respectively. PDI on S mutans biofilm on metallic and ceramic brackets with the use of H was not effective (P = 0.0162, P = 0.1669), however, MH caused a significant reduction of 44% and 53% of the cell count on metallic and ceramic brackets, respectively (P = 0.0020, P = 0.004). CONCLUSIONS: In vitro planktonic cultures with the use of H or MH and LED exerted significant antimicrobial activity. No effect was observed on S mutans biofilm on either bracket type with the use of H, MH showed better results, suggesting a promising use against dental caries and white spot lesions.

Use of photodynamic inactivation for in vitro reduction of prevalent bacteria in Fournier's Gangrene.

Fournier's Gangrene (FG) is an infectious disease caused by several synergic microbes, with high morbidity and mortality rates; therefore, the search for new less invasive and mutilating treatments, with faster recovery, has been proposed. Surgical intervention, the use of several systemic and topic antibiotics, and hyperbaric oxygen therapy are currently the best approach for the treatment of these patients. The use of Photodynamic Inactivation (PDI) aims to lower morbidity and mortality, by reducing bacterial microbiota and speeding wound healing. In the present study, viable bacteria were separated in four groups: Group L-/F- (no irradiation with red laser and absence of methylene blue photosensitizer), Group L-/F+ (no irradiation with red laser and presence of methylene blue), Group L+/F- (irradiation with red laser and absence of methylene blue) and L+/F+ (irradiation with red laser associated to methylene blue). In all groups, exposure time to treatment was 5, 10 and 15 minutes. The concentration of methylene blue photosensitizer was 0.1mg/L, and the dose of red laser (660nm wave length) was 176.9mW/cm2. Following irradiation, the reduction of number of bacteria was evaluated, and the results were expressed in colony forming units (CFU) and as exponential reduction. As the main results, in the L+/F+ group, there were no Clostridium perfringens and Staphylococcus aureus CFUs and there was a reduction of Escherichia coli that was not observed in the other groups.

Quantifying glucose and lipid components in human serum by Raman spectroscopy and multivariate statistics.

Raman spectroscopy has been employed in the quantitative analysis of biochemical components in human serum. This study aimed to develop a spectral model to estimate the concentration of glucose and lipid fractions in human serum, thus evaluating the feasibility of Raman spectroscopy technique for diagnostic purposes. A total of 44 samples of blood serum were collected from volunteers submitted to routine blood biochemical assay analysis. The biochemical concentrations of glucose, triglycerides, cholesterol, and high-density and low-density lipoproteins (HDL and LDL) were obtained by colorimetric method. Serum samples (200 µL) were submitted to Raman spectroscopy (830 nm, 250 mW, 50-s accumulation). The spectra of sera present peaks related to the main constituents, particularly proteins and lipids. A quantitative model based on partial least squares (PLS) regression has been developed to estimate the concentration of these compounds, taking the biochemical concentrations assayed by the colorimetric method as sample's actual concentrations. The PLS model based on leave-one-out cross-validation approach estimated the concentration of triglycerides and cholesterol with r = 0.98 and 0.96, and root mean square error of 35.4 and 15.9 mg/dL, respectively. For the other biochemicals, the r was ranging from 0.75 to 0.86. These results evidenced the possibility of performing biochemical assay in blood serum samples by Raman spectroscopy and PLS regression and may be employed as a means of diagnosis in routine clinical analysis.

Correlation between METAVIR scores and Raman spectroscopy in liver lesions induced by hepatitis C virus: a preliminary study.

The viral hepatitis C is one of the most important causes of chronic hepatic illness worldwide, affecting around 3 % of the world population. Raman spectroscopy has been employed to distinguish normal from hepatic lesions through differences in the spectral features related to the METAVIR score system. This preliminary study evaluated 11 patients with diagnoses of chronic hepatitis C who underwent hepatic biopsies; the biopsies were submitted to near-infrared Raman spectroscopy using a dispersive spectrometer (830-nm wavelength, 300-mW laser power, and 20-s exposure time). The METAVIR was further scored, and the spectra were submitted to principal component analysis (PCA). The results show a good correlation between the Raman spectroscopy features and the stage of hepatic inflammation and fibrosis. PCA showed that samples with a higher degree of fibrosis presented a higher amount of protein features (collagen), whereas samples with a higher degree of inflammation presented higher features of hemoglobin, in accordance to the expected evolution of chronic hepatitis. Quinone was found to be an important biomarker in early hepatic lesions with a spectral feature at 1595 cm(-1). This study demonstrates that Raman spectroscopy may become an important tool for diagnosing liver disease.

Experimental full-thickness burns induced by CO2 laser.

Many studies have been conducted on the treatment of burns because they are important in morbidity and mortality. These studies are mainly focused on improving care and quality of life of patients. The aim of this study is the induction of standardized full-thickness burns of the skin of rats using the CO2 laser. The results show that non-contact technique using the CO2 laser is effective to induce such standardization of burning and is an important step in determining the efficiency of different therapies used in treating burns.

Assessment of the pre-emptive effect of photobiomodulation in the postoperative period of impacted lower third molar extractions: A randomized, controlled, double-blind study protocol.

Photobiomodulation is a safe option for controlling pain, edema, and trismus when applied postoperatively in third molar surgery. However, administration prior to surgery has been under-explored. This study aims to explore the effectiveness of pre-emptive photobiomodulation in reducing postoperative edema in impacted lower third molar extractions. Two groups of healthy individuals undergoing tooth extraction will be randomly assigned: Control group receiving pre-emptive corticosteroid and simulated photobiomodulation, and Photobiomodulation Group receiving intraoral low-intensity laser and extraoral LED cluster application. The primary outcome will be postoperative edema after 48 h. The secondary outcomes will be pain, trismus dysphagia, and analgesic intake (paracetamol). These outcomes will be assessed at baseline as well as two and seven days after surgery. Adverse effects will be recorded. Data will be presented as means ± SD and a p-value < 0.05 will be indicative of statistical significance.

Root Resorption of the Permanent Central Incisor through Ectopic Eruption of the Maxillary Canine.

Although ectopic eruption of the maxillary canine has a low prevalence, a late diagnosis can have serious consequences. A careful clinical examination, assisted with radiographic examination, ensures early diagnosis, facilitates planning, and minimizes possible adverse consequences. This study reports a case of ectopic eruption of the permanent maxillary canine, with complete root resorption of the central permanent incisor, the consequences of which caused functional, aesthetic, and psychological harms to the patient. The procedures used included canine ectopic remodeling of the ectopic canine in the central incisor and orthodontic correction, which treated the anomaly and rebuilt the patient's self-esteem.

Microtensile bond strength of resin composite to dentin treated with Er:YAG laser of bleached teeth.

The objective of this study was to evaluate the influence of Er:YAG laser (λ = 2.94 µm) on microtensile bond strength (µTBS) and superficial morphology of bovine dentin bleached with 16% carbamide peroxide. Forty bovine teeth blocks (7 × 3 × 3 mm(3)) were randomly assigned to four groups: G1- bleaching and Er:YAG irradiation with energy density of 25.56 J/cm(2) (focused mode); G2 - bleaching; G3 - no-bleaching and Er:YAG irradiation (25.56 J/cm(2)); G4 - control, non-treated. G1 and G2 were bleached with 16% carbamide peroxide for 6 h during 21 days. Afterwards, all blocks were abraded with 320 to 600-grit abrasive papers to obtain flat standardized dentin surfaces. G1 and G3 were Er:YAG irradiated. Blocks were immediately restored with 4-mm-high composite resin (Adper Single Bond 2, Z-250-3 M/ESPE). After 24 h, the restored blocks (n = 9) were serially sectioned and trimmed to an hour-glass shape of approximately 1 mm(2) at the bonded interface area, and tested in tension in a universal testing machine (1 mm/ min). Failure mode was determined at a magnification of 100× using a stereomicroscope. One block of each group was selected for scanning electron microscope (SEM) analysis. µTBS data was analyzed by two-way ANOVA and Tukey test (α = 0.05). Mean bond strengths (SD) in MPa were: G1- 32.7 (5.9)(A); G2- 31.1 (6.3)(A); G3- 25.2 (8.3)(B); G4- 36.7 (9.9).(A) Groups with different uppercase letters were significantly different from each other (p < .05). Enamel bleaching procedure did not affect µTBS values for dentin adhesion. Er:YAG laser irradiation with 25.56 J/cm(2) prior to adhesive procedure of bleached teeth did not affect µTBS at dentin and promoted a dentin surface with no smear layer and opened dentin tubules observed under SEM. On the other hand, Er:YAG laser irradiation prior to adhesive procedure of non-bleached surface impaired µTBS compared to the control group.

Photobiomodulation Effectiveness in Treating Androgenetic Alopecia.

Background: Androgenetic alopecia (AGA) is a genetically determined condition, which leads to progressive hair loss (HL) of the vertex, affects hair follicles, and promotes partial or total HL. It may be related to important psychological and social distress. Objective: The aim of the study was to evaluate the effects of photobiomodulation (PBM) in patients with AGA. Methods: Twenty-five men 20-54 years of age participated in this study. The irradiations were punctual, in contact mode, with 1 cm between each point covering the entire affected area. A red low-level laser (λ = 660 nm) (Recover®, MMOptics, São Carlos, Brazil) was used with 100 mW, 30 sec, and 3 J per point, twice a week on alternate days for 10 weeks. Evaluations were made by photographic records from the same area before any intervention (T1), after 5 weeks (T2), after 10 weeks (T3). Two blinded evaluators using the ImageJ® software assessed the hair density. Results: The hair density evaluation showed a significant increase in hair count between T1 and T2 (p = 0.0004) and between T1 and T3 (p = 0.0285), however between T2 and T3 no statistical difference was found (p > 0.05). Conclusions: PBM provides a stimulus for hair density in 5 weeks. After this period, we observed that after five extra sessions, it does not increase hair density in the treated region. This study showed that the PBM is effective and promoted safe results with a reduced number of sessions for the AGA treatment.

Comparison of the Effects of High-Power Diode Laser and Electrocautery for Lingual Frenectomy in Infants: A Blinded Randomized Controlled Clinical Trial.

The aim of the study was to evaluate the release of the lingual frenulum through frenectomy in newborns zero to 90 days of age who breastfed and had diagnosis of ankyloglossia with an indication for surgery, comparing two methods: electrocautery and a high-power diode laser. Fifty-seven patients were randomly allocated to two groups (23 submitted to electrocautery and 34 submitted to a high power diode laser). Tongue movements were evaluated based on a clinical assessment and using the Bristol Tongue Assessment Tool (BTAT) before and 15 days after the surgical procedures. The visual analog scale was administered to the mothers on the same occasions for the measurement of pain during breastfeeding. Both groups had an increased BTAT score (favorable outcome) at the post-surgical evaluation, but the anterior third of the tongue was not always free to enable the movements necessary for lingual functions. It is fundamental for surgeons to have skill and in-depth knowledge of the equipment used to avoid accidents and complications in the region of important structures. Both techniques employed in this study were safe and effective, causing little bleeding and few postoperative complications. The group submitted to a high-power diode laser exhibited less post-surgical bleeding compared to the group submitted to electrocautery and no inflammation at the edges of the surgical cut.

Protocol for the clinical practice of photodynamic therapy in endodontics: assessment of guideline quality using the AGREE II instrument.

BACKGROUND: The choice of parameters in Photodynamic Therapy for endodontic treatment, such as wavelength, energy, application time, and number of sessions can vary based on the characteristics of the procedure and the patient. Providing information supported by scientific evidence in an accessible way to clinicians who are unfamiliar with the literature is necessary. Thus, this study aimed to synthesize a clinical protocol for the use of photodynamic therapy in endodontics in permanent teeth. METHODS: Protocols with high methodological quality were identified using a literature search and the Appraisal of Guidelines Research and Evaluation Instrument (AGREE II), a validated tool for assessing quality. The recommendations of these studies were synthesized and submitted to a group of experts for evaluation and adaptation, and consensus was assessed using the Delphi methodology. RESULTS: The analysis of the literature on the application of antimicrobial photodynamic therapy in endodontics showed that clinical trials with good levels of evidence and clinical recommendations have been reported previously, with two studies identified as having a clinical recommendation level of A1A and an evidence level of A. CONCLUSION: The written protocol was considered to be satisfactory and as having appropriate content validity during the second round of evaluation by the experts. The studies included in this research were predominantly explanatory in nature, highlighting the need for pragmatic designs to increase the degree of clinical applicability.

Evaluation of the effects of high-level laser and electrocautery in lingual frenectomy surgeries in infants: protocol for a blinded randomised controlled clinical trial.

INTRODUCTION: Ankyloglossia (tongue-tie) is an anomaly characterised by an abnormally short, thick or small lingual frenulum that restricts tongue movements. This condition is considered one of the factors that can interfere with breast feeding by diminishing the ability of the newborn to latch adequately. According to the Brazilian Health Ministry, the prevalence of this anomaly among newborns is 3%-16%. Frenectomy is the most suitable surgical procedure for the treatment of ankyloglossia. The aim of this study is to compare the performance of electrocautery and high-power diode laser as forms of frenectomy. METHODS AND ANALYSIS: The proposed study will be a randomised, controlled, blind clinical trial involving the participation of healthy infants 0-3 months of age with breastfeeding difficulty and a diagnosis of tongue-tie with an indication for lingual frenectomy. The guardians will receive clarifications regarding the procedures and will authorise the participation of the infants by signing a statement of informed consent. A non-blinded researcher will perform the screening and procedures and a blinded researcher will perform the postoperative evaluations. Fifty-six infants will be randomly allocated into two groups (n=28): the electrocautery group or the high-power laser group. The preparation of the patients, asepsis and infection control procedures will rigorously follow biosafety norms. For both groups, patient histories will be taken, clinical evaluations will be performed and a standardised photograph of the lingual frenulum will be taken before surgery. The Bristol Tongue Assessment Tool will be used. We will evaluate pain in the mother during breast feeding before, immediately after, and 15 days after surgery. ETHICS AND DISSEMINATION: This protocol was submitted to the Research Ethics Committee of Nove de Julho University, having been given a favourable opinion (Number: 4387769). Results will be submitted to international peer-reviewed journals and presented at international conferences. TRIAL REGISTRATION NUMBER: NCT04487418.

The influence of erbium:yttrium-aluminum-garnet laser ablation with variable pulse width on morphology and microleakage of composite restorations.

The objective of this study was to evaluate the influence of various pulse widths with different energy parameters of erbium:yttrium-aluminum-garnet (Er:YAG) laser (2.94 mum) on the morphology and microleakage of cavities restored with composite resin. Identically sized class V cavities were prepared on the buccal surfaces of 54 bovine teeth by high-speed drill (n = 6, control, group 1) and prepared by Er:YAG laser (Fidelis 320A, Fotona, Slovenia) with irradiation parameters of 350 mJ/ 4 Hz or 400 mJ/2 Hz and pulse width: group 2, very short pulse (VSP); group 3, short pulse (SP); group 4, long pulse (LP); group 5, very long pulse (VLP). All cavities were filled with composite resin (Z-250-3 M), stored at 37 degrees C in distilled water, polished after 24 h, and thermally stressed (700 cycles/5-55 degrees C). The teeth were impermeabilized, immersed in 50% silver nitrate solution for 8 h, sectioned longitudinally, and exposed to Photoflood light for 10 min to reveal the stain. The leakage was evaluated under stereomicroscope by three different examiners, in a double-blind fashion, and scored (0-3). The results were analyzed by Kruskal-Wallis test (P > 0.05) and showed that there was no significant differences between the groups tested. Under scanning electron microscopy (SEM) the morphology of the cavities prepared by laser showed irregular enamel margins and dentin internal walls, and a more conservative pattern than that of conventional cavities. The different power settings and pulse widths of Er:YAG laser in cavity preparation had no influence on microleakage of composite resin restorations.

Treatment of herpes labialis by photodynamic therapy: Study protocol clinical trial (SPIRIT compliant).

BACKGROUND: Lesions of herpes labialis are caused by the herpes simplex virus type 1 and cause pain and aesthetic compromise. It is characterized by the formation of small vesicles that coalesce and rupture forming extremely painful ulcers, that evolve to crusts, dry desquamations until their complete remission. Currently the treatment of these lesions is done with acyclovir. Although it diminishes the symptomatology, it causes viral resistance and does not prevent the recurrence of the lesions. It is known that antimicrobial photodynamic therapy (aPDT) has numerous advantages, among them: the reduction of the time of remission, and does not cause resistance. This protocol will determine the effectiveness of PDT in lesions of herpes labialis. MATERIALS AND METHODS: A total of 30 patients with herpes labialis in the prodromal stage of vesicles, ulcers, and crusts will be selected to participate in the study and randomized into 2 groups: G1 control and G2 experimental. After signing Research Ethics Committee and TA, patients in group G1 will undergo the standard gold treatment for herpes labialis with acyclovir and simulated PDT treatment. Patients in the experimental G2 group will be treated simulating the gold standard treatment of herpes labialis (placebo) and PDT. In all patients, saliva samples will be collected for analysis of cytokines, and will be performed exfoliative cytology in the lesions. The pain will be assessed through a pain scale and a questionnaire of quality of life related to oral health (OHIP-14) will be given to them. Patients will continue to be followed up after 7 days, 1 month, 3 months, and 6 months; if there is a recurrence of the lesion, they will contact the researchers.Clinical registration: clinicaltrials.gov - NCT04037475. Registered on July 2019.

Effects of Nd:YAG laser irradiation on the hybrid layer of different adhesive systems.

PURPOSE: The aim of this in vitro study was to evaluate the microtensile bond strength (microTBS) and hybrid layer morphology of different adhesive systems, either followed by treatment with Nd:YAG laser irradiation or not. Previous studies have shown the effects of Nd:YAG laser irradiation on the dentin surface at restoration margins, but there are few reports about the significance of the irradiation on the hybrid layer. MATERIALS AND METHODS: The flattened coronal and root dentin samples of 24 bovine teeth were randomly divided into 8 groups, according to the adhesive system used -- Scotchbond Multi Purpose (SBMP) or Clearfil SE Bond (CSEB) -- and were either irradiated with Nd:YAG or not, with different parameters: 0.8 W/10 Hz, 0.8 W/20 Hz, 1.2 W/10 Hz, 1.2 W/20 Hz. The left sides of specimens were the control groups, and right sides were irradiated. A composite crown was built over bonded surfaces and stored in water (24 h at 37 degrees C). Specimens were sectioned vertically into slabs that were subjected to microTBS testing and observed by SEM. RESULTS: Control groups (27.81 +/- 1.38) showed statistically higher values than lased groups (21.37 +/- 0.99), and CSEB control group values (31.26 +/- 15.71) were statistically higher than those of SBMP (24.3 +/- 10.66). There were no significant differences between CSEB (20.34 +/- 10.01) and SBMP (22.43 +/- 9.82) lased groups. Among parameters tested, 0.8 W/10 Hz showed the highest value (25.54 +/- 11.74). Nd:YAG laser irradiation caused dentin to melt under the adhesive layer of both adhesive systems tested. CONCLUSION: With the parameters used in this study, Nd:YAG laser irradiation of the hybrid layer promoted morphological changes in dentin and negatively influenced the bond strength of both adhesive systems.

In vitro microleakage of composite restorations prepared by Er:YAG/Er,Cr:YSGG lasers and conventional drills associated with two adhesive systems.

PURPOSE: The objective of this in vitro study was to compare the degree of microleakage of composite restorations performed by lasers and conventional drills associated with two adhesive systems. MATERIALS AND METHODS: Sixty bovine teeth were divided into 6 groups (n = 10). The preparations were performed in groups 1 and 2 with a high-speed drill (HD), in groups 3 and 5 with Er:YAG laser, and in groups 4 and 6 with Er,Cr:YSGG laser. The specimens were restored with resin composite associated with an etch-and-rinse two-step adhesive system (Single Bond 2 [SB]) (groups 1, 3, 4) and a self-etching adhesive (One-Up Bond F [OB]) (groups 2, 5, 6). After storage, the specimens were polished, thermocycled, immersed in 50% silver nitrate tracer solution, and then sectioned longitudinally. The specimens were placed under a stereomicroscope (25X) and digital images were obtained. These were evaluated by three blinded evaluators who assigned a microleakage score (0 to 3). The original data were submitted to Kruskal-Wallis and Mann-Whitney statistical tests. RESULTS: The occlusal/enamel margins demonstrated no differences in microleakage for all treatments (p > 0.05). The gingival/dentin margins presented similar microleakage in cavities prepared with Er:YAG, Er,Cr:YSGG, and HD using the etch-and-rinse two-step adhesive system (SB) (p > 0.05); otherwise, both Er:YAG and Er,Cr:YSGG lasers demonstrated lower microleakage scores with OB than SB adhesive (p < 0.05). CONCLUSION: The microleakage score at gingival margins is dependent on the interaction of the hard tissue removal tool and the adhesive system used. The self-etching adhesive system had a lower microleakage score at dentin margins for cavities prepared with Er:YAG and Er,Cr:YSGG than the etch-and-rinse two-step adhesive system.

Microleakage of an adhesive system used as a fissure sealant.

AIM: The aim of this study was to investigate the microleakage of pit and fissure sealants in primary teeth and to determine if multi-step methods should produce better results in terms of microleakage prevention. METHODS AND MATERIALS: A total of 40 intact primary molars were randomly assigned to one of four sealant groups: resin based sealant Ultraseal XT (US - Ultradent) (Group 1, n=10); adhesive system Scotchbond Multi Purpose Plus (SBMP - 3M/ESPE) used as a sealant (Group 2, n=10); primer (SBMP) and US (Group 3, n=10); and primer, bond (SBMP) and US (Group 4, n=10). After thermocycling (x700, 5-55 degrees C) all teeth surfaces were made impermeable with the exception of the occlusal surface. Samples were immersed in 50% silver nitrate for 8 hours, sectioned longitudinally with two cuts in the central fissure pit, and then immersed in photo development solution followed by 16 hours in fluorescent light. Pictures were obtained by light microscope (x40) and the degree of microleakage was evaluated by three blinded evaluators. The data were analyzed using the Kruskal Wallis test. RESULTS: Significant statistical differences (p<.05) were observed between Groups 1-3, Groups 2-3, Groups 2-4, and Groups 3-4. Group 3 showed higher microleakage scores. CONCLUSION: The adhesive system and the resin based sealant demonstrated similar microleakage properties, suggesting the possibility that adhesives can be used in a clinical setting. Additionally, the increase in the number of clinical steps required by common application of resin based sealant, including use of primer or primer and bond, did not lead to better results in preventing microleakage. CLINICAL SIGNIFICANCE: The adhesive system can be used as a sealant without increasing the microleakage. Thus, the use of the adhesive system before the application of the sealant is not necessary to reduce the microleakage, although further research is warranted to support this conclusion.

A Study on the Macroscopic Morphometry of the Lesion Area on Diabetic Ulcers in Humans Treated with Photodynamic Therapy Using Two Methods of Measurement.

BACKGROUND: Diabetes Mellitus is a chronic disease that can lead to lower-limb ulceration. The photodynamic therapy (PDT) is based on light interaction with a photosensitizer capable to promote bacterial death and acceleration of wound healing. OBJECTIVE: This study aims to accomplish a macroscopic morphometry evaluation on diabetic ulcer area in humans that were under PDT. MATERIALS AND METHODS: A clinical study was conducted by convenience sample, experimental, controlled, and blinded, composed of 12 patients of both sexes with diabetic ulcers in lower limbs that were divided into two groups, control (n = 6) and PDT (n = 6). They were all treated with collagenase/chloramphenicol during the experimental period, in which six of them had received PDT with Methylene Blue dye (0.01%) associated with laser therapy (660 nm, 30 mW, 8 sec, 6 J/cm2, beam area of 0.04 mm2), three times per week, totaling 10 sessions. Ulcer areas were analyzed by their nominal area and photographed for analysis through the ImageJ® software. Then, the Ulcer Healing Index and the wound area reduction were calculated for both groups. RESULTS: Data from the UHI and wound area reduction parameters show that there is a statistically significant difference (p < 0.05) between the control group and PDT group, with the PDT group showing a greater reduction of the diabetic ulcer area than the control group. In the ImageJ software area analysis, both patient groups presented significant differences (p < 0.05) between pre and post-treatment in relation to lesion reduction area, the PDT being better. CONCLUSIONS: Results show that PDT accelerates the closure of ulcer wounds and to evaluate the wound area, different measurement methods can be used to follow-up the tissue repair process.

UV-C light as an alternative for disinfecting orthodontic pliers / Luz UV-C como alternativa para desinfecção de alicates ortodônticos

Objetivo: Os ortodontistas usam alicates ortodônticos continuamente, e essas ferramentas têm um forte potencial para infecções nosocomiais. Este estudo teve como objetivo comparar a eficiência de três métodos de desinfecção de alicates ortodônticos. Material e Métodos: As pontas ativas de 26 alicates ortodônticos (cortadores distais e alicates Weingart) foram contaminadas com microrganismos, vírus e esporos S. aureus, E. coli e C. albicans. Os métodos de controle microbiano foram desinfecção com álcool 70%, esterilização com esferas de vidro (250 °C calor seco) e irradiação com luz ultravioleta (250 nm UV-C) por 30 e 60 segundos. O número de unidades formadoras de colônias (UFC) e unidades formadoras de placas (UFP) foi quantificado e comparado para cada microrganismo após incubação em placas de cultura. Resultados: Todas as pontas do alicate dos grupos que receberam luz ultravioleta ou foram submetidos à esterilização com esferas de vidro apresentaram número significativamente menor de esporos, bactérias e fungos do que suas respectivas amostras controle (p<0,001). A desinfecção física com luz UV-C pode representar uma alternativa confiável em comparação com outros métodos químicos e físicos devido ao aumento de microrganismos resistentes a produtos químicos e à emissão de subprodutos nocivos após o tratamento químico. Conclusão: Os métodos de controle microbiano testados foram eficazes na desinfecção de alicates ortodônticos, tornando a luz ultravioleta-C uma alternativa promissora para eliminar os microrganismos dos alicates (AU)

Objective: Orthodontists use orthodontic pliers continuously, and these tools have a strong potential for nosocomial infections. This study aimed to compare the efficiency of three methods for disinfecting orthodontic pliers. Material and Methods: The active tips of 26 orthodontic pliers (distal end cutters and Weingart pliers) were contaminated with S. aureus, E. coli, and C. albicans microorganisms, viruses, and spores. The microbial control methods were 70% alcohol disinfection, glass bead sterilization (250 °C dry heat), and ultraviolet light irradiation (250 nm UV-C) for 30 and 60 seconds. The number of colony-forming units (CFU) and plaque-forming units (PFU) was quantified and compared for each microorganism after incubation in culture plates. Results: All tips of the pliers in the groups that received ultraviolet light or were subjected to glass bead sterilization showed a significantly lower number of spores, bacteria, and fungi than their respective control samples (p<0.001). Physical disinfection with UV-C light may represent a reliable alternative compared to other chemical and physical methods due to the increase in microorganisms resistant to chemical products and the emission of harmful by-products after chemical treatment. Conclusion: The tested microbial control methods were effective in the disinfection of orthodontic pliers, making ultraviolet-C light a promising alternative to eliminate microorganisms from pliers (AU)