Biomedical waste plastic: bacteria, disinfection and recycling technologies-a comprehensive review.

Plastic recycling reduces the wastage of potentially useful materials as well as the consumption of virgin materials, thereby lowering the energy consumption, air pollution by incineration, soil and water pollution by landfilling. Plastics used in the biomedical sector have played a significant role. Reducing the transmission of the virus while protecting the human life in particular the frontline workers. Enormous volumes of plastics in biomedical waste have been observed during the outbreak of the pandemic COVID-19. This has resulted from the extensive use of personal protective equipment such as masks, gloves, face shields, bottles, sanitizers, gowns, and other medical plastics which has created challenges to the existing waste management system in the developing countries. The current review focuses on the biomedical waste and its classification, disinfection, and recycling technology of different types of plastics waste generated in the sector and their corresponding approaches toward end-of-life option and value addition. This review provides a broader overview of the process to reduce the volume of plastics from biomedical waste directly entering the landfill while providing a knowledge step toward the conversion of "waste" to "wealth." An average of 25% of the recyclable plastics are present in biomedical waste. All the processes discussed in this article accounts for cleaner techniques and a sustainable approach to the treatment of biomedical waste.

Elucidation of dominant energy metabolic pathways of methane, sulphur and nitrogen in respect to mangrove-degradation for climate change mitigation.

Mangroves play a key role in ecosystem balancing and climate change mitigation. It acts as a source and sink of methane (CH4), a major greenhouse gas responsible for climate change. Energy metabolic pathways of methane production (methanogenesis) and oxidation (methanotrophy) are directly driven by sulphur (S) and nitrogen (N) metabolism and salinity in coastal wetlands. To investigate, how mangrove-degradations, affect the source-sink behaviour of CH4; the pathways of CH4, S and N were studied through whole-genome metagenomic approach. Soil samples were collected from degraded and undisturbed mangrove systems in Sundarban, India. Structural and functional microbial diversities (KEGG pathways) of CH4, S and N metabolism were analysed and correlated with labile carbon pools and physico-chemical properties of soil. Overall, the acetoclastic pathway of methanogenesis was dominant. However, the relative proportion of conversion of CO2 to CH4 was more in degraded mangroves. Methane oxidation was higher in undisturbed mangroves and the serine pathway was dominant. After serine, the ribulose monophosphate pathway of CH4 oxidation was dominant in degraded mangrove, while the xylulose monophosphate pathway was dominant in undisturbed site as it is more tolerant to salinity and higher pH. The assimilatory pathway (AMP) of S-metabolism was dominant in both systems. But in AMP pathway, adenosine triphosphate sulfurylase enzyme reads were higher in degraded mangrove, while NADPH-sulfite reductase abundance was higher in undisturbed mangrove due to higher salinity, and pH. In N-metabolism, the denitrification pathway was predominant in degraded sites, whereas the dissimilatory nitrate reduction pathway was dominant in undisturbed mangroves. The relative ratios of sulphur reducing bacteria (SRB): methanogens were higher in degraded mangrove; however, methanotrophs:methanogens was higher in undisturbed mangrove indicated lower source and greater sink capacity of CH4 in the system. Microbial manipulation in mangrove-rhizosphere for regulating major energy metabolic pathways of methane could open-up a new window of climate change mitigation in coastal wetlands.

Preparation of hydrophobic epoxy-polydimethylsiloxane-graphene oxide nanocomposite coatings for antifouling application.

Epoxy-polydimethylsiloxane-graphene oxide (EPG) nanocomposite coatings were successfully developed by loading different wt% of graphene oxide nanosheets (GNs) into an epoxy-hydroxy-terminated-polydimethylsiloxane (EP-hPD) matrix via a facile in situ preparation technique. The inclusion of GNs into EPN led to an increase in modulus of elasticity and tensile strength up to 1570.46 MPa and 31.54 MPa, respectively, in the case of 1 wt% loading of GNs in the EP-hPD matrix. Also, an increase in the water contact angle from 90.1° to 115.2°, 104.5° and 101.7° was discerned at 1, 3 and 5 wt% loadings of GNs respectively. Taber abrasion results demonstrated a decrease in abrasion loss by 33.3% at 1 wt% loading of GNs in comparison to the unreinforced coating. An improvement in the glass transition temperature (Tg) was observed from 63.5 °C for the neat sample to 77.6 °C, 76.3 °C and 71.6 °C for the 1, 3 and 5 wt% EPG nanocomposites, respectively. An inevitable enhancement in the properties of the nanocomposites was affirmed due to the synergistic effect of GNs dispersed within the EP-hPD blend matrix. The prominent findings of this work include a minimum corrosion rate of 0.73 × 10-2 mm per year and upgradation in the antifouling performance of the nanocomposite coatings in comparison to the neat coating.

Influence of non-metallic parts of waste printed circuit boards on the properties of plasticised polyvinyl chloride recycled from the waste wire.

Extreme complexity in the range of metallic and non-metallic parts present in waste printed circuit boards leads to incineration for collecting valuable metals. The non-metallic parts of the printed circuit board can be used effectively without affecting the environment. In this study, the non-metallic parts of the printed circuit board, which is made up by cross-linked resin and fibre, was used as a filler in recycled plasticised polyvinyl chloride collected from waste wires and cables. The properties of the plasticised polyvinyl chloride matrix and plasticised polyvinyl chloride-non-metallic parts of printed circuit board composite were compared with each other by means of mechanical properties and thermal properties. Both mechanical and thermal properties results indicated that incorporation of non-metallic parts of printed circuit board significantly improved the hardness, stiffness, abrasion resistance and thermal stability of plasticised polyvinyl chloride-non-metallic parts of printed circuit board composite; however, the tensile strength of the composite material is not improved because of poor adhesion between the plasticised polyvinyl chloride matrix and non-metallic parts of printed circuit board filler. The poor chemical interaction is also observed from Fourier transform infrared spectroscopy results. This plasticised polyvinyl chloride-non-metallic parts of printed circuit board composite can reduce the leaching of a hazardous element from the printed circuit board with effective utilisation of plastics fraction from waste wires and cables.

Observation and Structure Determination of an Oxide Quasicrystal Approximant.

We report on the first observation of an approximant structure to the recently discovered two-dimensional oxide quasicrystal. Using scanning tunneling microscopy, low-energy electron diffraction, and surface x-ray diffraction in combination with ab initio calculations, the atomic structure and the bonding scheme are determined. The oxide approximant follows a 3^{2}.4.3.4 Archimedean tiling. Ti atoms reside at the corners of each tiling element and are threefold coordinated to oxygen atoms. Ba atoms separate the TiO_{3} clusters, leading to a fundamental edge length of the tiling 6.7 Å.

Antimicrobial activity of metal based nanoparticles against microbes associated with diseases in aquaculture.

The emergence of diseases and mortalities in aquaculture and development of antibiotics resistance in aquatic microbes, has renewed a great interest towards alternative methods of prevention and control of diseases. Nanoparticles have enormous potential in controlling human and animal pathogens and have scope of application in aquaculture. The present investigation was carried out to find out suitable nanoparticles having antimicrobial effect against aquatic microbes. Different commercial as well as laboratory synthesized metal and metal oxide nanoparticles were screened for their antimicrobial activities against a wide range of bacterial and fungal agents including certain freshwater cyanobacteria. Among different nanoparticles, synthesized copper oxide (CuO), zinc oxide (ZnO), silver (Ag) and silver doped titanium dioxide (Ag-TiO2) showed broad spectrum antibacterial activity. On the contrary, nanoparticles like Zn and ZnO showed antifungal activity against fungi like Penicillium and Mucor species. Since CuO, ZnO and Ag nanoparticles showed higher antimicrobial activity, they may be explored for aquaculture use.

Investigating hydrophobic ligand-receptor interactions in parathyroid hormone receptor using peptide probes.

With an increasing number of new chemical entities entering clinical studies, and an increasing share of the market, peptides and peptidomimetics constitute one of the most promising classes of therapeutics. The success of synthetic peptides as therapeutics relies on the lead optimization step in which the lead candidates are modified to improve drug-like properties of peptides related to potency, pharmacokinetics, solubility, and stability, among others. Peptidomimetics based on the N-terminal stretch of the first 11 amino acids of the PTH have been investigated as potential lead compounds for the treatment of osteoporosis. On the basis of a peptide reported in the literature, referred to here as the Parent Peptide (H-Aib-Val-Aib-Glu-Ile-Gln-Leu-Nle-His-Gln-Har-NH2), we conducted systematic SAR analyses to investigate the effects of altering peptide hydrophobicity on PTH receptor functional potency as measured by the cAMP (cyclic adenosine monophosphate) accumulation and ß-arrestin recruitment assays. Among hydrophobic residues, we found that the Val2 position shows the least flexibility in terms of the SAR studies, whereas the Leu7 position appeared to be most flexible. Through circular dichroism and nuclear magnetic resonance spectroscopy studies, we were able to establish that changes in hydrophobic residues significantly change the extent of peptide helicity and that the helical character correlates well with receptor agonist activity. Here, we report several novel PTH 1-11 peptidomimetics that show comparable or enhanced potency to stimulate Gs-signaling over ß-arrestin recruitment as compared with such properties of PTH 1-34 and the Parent Peptide.

Slow magnetic relaxations in manganese(III) tetra(meta-fluorophenyl)porphyrin-tetracyanoethenide. Comparison with the relative single chain magnet ortho compound.

Mn(III) tetra(meta-fluorophenyl)porphyrin-tetracyanoethenide coordination polymer (abbreviated meta-F) was synthesized and crystallographically and magnetically characterized. The compound crystallizes in the space group C2/c with four equivalent molecules in the unit cell arranged along two symmetry related nonparallel linear chain directions. Magnetic properties were studied by SQUID dc magnetization and ac susceptibility techniques and high field-high frequency electron spin resonance (HF-ESR). Glassy transition to a ferromagnetic-like state is observed at 10 K accompanied by slow magnetic relaxations. The glassiness is interpreted as due to 3D domain wall pinning. In a bias dc magnetic field the width of the relaxation time distribution decreases and the relaxations become similar to the relaxations of the single chain magnet Mn(III) tetra(ortho-fluorophenyl)porphyrin-tetracyanoethenide (abbreviated ortho-F), for which comparative HF-ESR studies were also conducted in this work. Magnetic properties of these two compounds are compared, and the nature of magnetic relaxations in meta-F is discussed.

Effect of parenteral endotoxin administration on the immuno-haematological responses of catfish, Heteropneustes fossilis.

Endotoxin, the outer cell wall membrane lipopolysaccharide component of the Gram-negative bacteria is a factor responsible for a number of complications/disorders and plays important role in the associated with pathophysiological complications and pathogenesis of many diseases in animals. Unlike higher animals which are extremely sensitive to endotoxin, fish are found to be resistant to endotoxic shock and earlier studies though limited have demonstrated the patho-physiological, immuno-endocrinological and immuno-neurological effects of LPS/endotoxin in aquatic animals including fish. Herein in the present investigation, the effect of pure endotoxin on immuno-haematological parameters of stinging catfish, Heteropneustes fossilis ranging from 50-60 g was studied by intraperitoneally injecting 0.1, 0.05 and 0.01 mg endotoxin per fish. H. fossilis yearlings were found to resist the endotoxin concentration up to 0.1 mg without any mortality. While, no change in immune parameters was recorded in stinging catfish injected with low dose of endotoxin (0.01 mg), most of the immune parameters were found to be significantly elevated in catfish injected with 0.05 mg endotoxin. Different serum and immune parameters like protein, globulin, lysozyme, respiratory burst activity, myeloperoxidase activity, natural agglutination titre were found to be significantly high (p < 0.01) at a dose of 0.05 mg endotoxin per fish. On the contrary, most of these parameters were decreased at high dose i.e., 0.1 mg endotoxin per fish, thereby indicating the immuno-suppressive effect of the endotoxin. The findings of the modulation of innate immunity also corroborated with the results of Aeromonas hydrophila pathogen challenge study with highest percent of mortality in group injected with 0.1 mg endotoxin per fish and least percentage in group injected with 0.05 mg endotoxin per fish.

Tuning up the photovoltaic performances upon the utility of diketopyrrolopyrrole in PEO-based gel polymer electrolytes.

The role of diketopyrrolopyrrole (DPP-H) as an additive on the ionic conductivity of poly(ethylene oxide) (PEO)-based gel polymer electrolytes (GPE) was studied for DSSC applications. The pure PEO/PC/KI/TPAI/I2 GPE was prepared with a mixture of propylene carbonate (PC) as a non-volatile plasticizer and iodide salts, such as potassium iodide (KI), tetrapropylammonium iodide (TPAI) and iodine (I2), together with PEO. The modified GPEs were prepared with different weight percentage (wt%) ratios (0.5%, 0.75%, 1% and 1.25%) of DPP-H using acetonitrile as a solvent. The polymer gel electrolytes were characterized by X-ray diffractometer (XRD) and Fourier transform infrared spectroscopy (FTIR), and the electrochemical properties were analyzed to relate the nature of the polymer and iodine ion conducting properties. The pure PEO/PC/TPAI/KI/I2 electrolyte exhibited an ionic conductivity value of 0.084 mS·cm-1 at room temperature. Upon the optimized addition of DPP-H (0.75 wt%), the ionic conductivity was found to be improved to a maximum value of 0.393 mS·cm-1, and the highest diffusion coefficient of 1.02 × 10-6 cm2 s-1 was observed. The optimized GPEs photovoltaic characterization studies showed higher power conversion efficiency (PCE) of 6.69% for DSSC under light illumination intensity of 100 mW cm-2. The same was compared with pure electrolyte, which delivered PCE of 4.39%. To gain an in-depth understanding of the interfacial resistance of the fabricated devices, the electron lifetime and transient photo response was analyzed. These above studies showed that prepared GPE could be an efficient alternative for traditional DSSCs with liquid electrolyte.

A unique bacterial and archaeal diversity make mangrove a green production system compared to rice in wetland ecology: A metagenomic approach.

Mangrove provides significant ecosystem services, however, 40% of tropical mangrove was lost in last century due to climate change induced sea-level rise and anthropogenic activities. Sundarban-India, the largest contiguous mangrove of the world lost 10.5% of its green during 1930-2013 which primarily converted to rice-based systems. Presently degraded mangrove and adjacent rice ecology in Sundarban-India placed side by side and create typical ecology which is distinct in nature in respect to soil physicochemical properties, carbon dynamics, and microbial diversities. We investigated the structural and functional diversities of bacteria and archaea through Illumina MiSeq metagenomic analysis using V3-V4 region of 16S rRNA gene approach that drives greenhouse gases emission and carbon-pools. Remote sensing-data base were used to select the sites for collecting the soil and gas samples. The methane and nitrous oxide emissions were lower in mangrove (-0.04 mg m-2 h-1 and -52.8 µg m-2 h-1) than rice (0.26 mg m-2 h-1 and 44.7 µg m-2 h-1) due to less availability of carbon-substrates and higher sulphate availability (85.8% more than rice). The soil labile carbon-pools were more in mangrove, but lower microbial activities were noticed due to stress conditions. A unique microbial feature indicated by higher methanotrophs: methanogens (11.2), sulphur reducing bacteria (SRB): methanogens (93.2) ratios and lower functional diversity (7.5%) in mangrove than rice. These could be the key drivers of lower global warming potential (GWP) in mangrove that make it a green production system. Therefore, labile carbon build-up potential (38%) with less GWP (63%) even in degraded-mangrove makes it a clean production system than wetland-rice that has high potential to climate change mitigation. The whole genome metagenomic analysis would be the future research priority to identify the predominant enzymatic pathways which govern the methanogenesis and methanotrophy in this system.

Probiotics and immunity: a fish perspective.

Probiotics are usually live microorganisms which when administered in adequate amounts confer a health benefits on host. Nowadays, probiotics are also becoming an integral part of the aquaculture practices to obtain high production. The common probiotics that are used for aquaculture practices include Lactobacillus, Lactococcus, Leuconostoc, Enterococcus, Carnobacterium, Shewanella, Bacillus, Aeromonas, Vibrio, Enterobacter, Pseudomonas, Clostridium, and Saccharomyces species. The involvement of probiotics in nutrition, disease resistance and other beneficial activities in fish has proven beyond any doubt. Among the numerous health benefits attributed to probiotics, modulation of immune system is one of the most commonly purported benefits of the probiotics and their potency to stimulate the systemic and local immunity under in vitro and in vivo conditions is noteworthy. Different probiotics either monospecies or multispecies supplementation can eventually elevate phagocytic, lysozyme, complement, respiratory burst activity as well as expression of various cytokines in fish. Similarly, probiotics can stimulate the gut immune system of fish with marked increase in the number of Ig(+) cells and acidophilic granulocytes. Furthermore, mono-bacterial association studies (with non-probiotic bacterial strains) in gnotobiotic fish also indicate the up-regulation of various immune related genes. Though the exact mode of action of probiotics is yet to be established in any animal including fish, probiotics often exert host specific and strain specific differences in their activities. Various factors like source, type, dose and duration of supplementation of probiotics can significantly affect the immunomodulatory activity of probiotics. The review is therefore, aiming to highlight the immunomodulatory activity of probiotics and also to evaluate the factors that regulate for the optimum induction of immune responses in fish.

Role of maternally derived immunity in fish.

Maternal immunity is of paramount importance for protection of young ones at early stage of life since the immune factors of an immunocompetent female are transferred transplacentally or through colostrum, milk or yolk to an immunologically naive neonate. Both innate and adaptive type of immunity are transferred of from mother to offspring in fishes. These factors include immunoglobulin (Ig)/antibody, complement factors, lysozymes, protease inhibitors like alpha macroglobulin, different types of lectins and serine proteases like molecules. Among different types of Ig viz. IgM, IgD, IgT/IgZ and IgM-IgZ chimera types, IgM is present in most of the teleostean fishes. In teleosts, IgM either as a reduced/breakdown product or monomeric form is usually transferred to the offsprings. The maternally derived IgM usually persists for a limited duration, exhausts within the completion of yolk absorption process, and completely disappears thereafter during larval stages. Maternal transfer of immunity which provides defense to embryo and larvae depends upon the health as well as the immune status of brood fish. The overall health status of brood fish can affect breeding performances, quality seed production and protection of offsprings. However, factors such as age, maturation, reproductive behaviour and nutrition (micro and macro-nutrients) may affect the immunity in brood fishes. Besides these, seasonal changes such as photoperiods, temperature, adverse environmental conditions, and stress conditions like handling, crowding, and water pollution/contamination can also affect the immunity of brood fishes. The maintenance of the brood stock immunity at high level during vitellogenesis and oogenesis, is utmost important for reducing mortalities at larval/post larval stages through maximum/optimum transfer of maternal immunity. Brood stock immunization prior to breeding as well as selective breeding among the disease resistant families might be the ideal criteria for producing quality seed.

Monte Carlo simulations of diluted magnetic semiconductors using ab initio exchange parameters.

Co doped ZnO (Zn(1-x)Co(x)O) is studied as a prototype material for transition metal doped II-VI diluted magnetic semiconductors (DMSs) from first-principles and Monte Carlo simulations. The exchange interactions are calculated using the Korringa-Kohn-Rostoker (KKR) Green's function method. The exchange coupling constants thus obtained are treated in the classical Heisenberg model and the magnetic phase transitions are studied by the Monte Carlo technique. Our results show that the defect free substitutional DMSs of Zn(1-x)Co(x)O do not sustain magnetization at low concentration. At high concentration, we find layered magnetic structures. Ferromagnetism, with Curie temperature below room temperature, is stable at intermediate Co concentrations. First-principles studies with the generalized gradient approximation (GGA) and the GGA together with the Hubbard U are discussed with respect to structural and electronic properties of ZnO.

Complexation of U(VI) with Cucurbit[5]uril: Thermodynamic and Structural investigation in aqueous medium.

The assessment of cucurbituril (CBn) for selective removal of actinides from nuclear waste streams requires comprehensive understanding of binding parameters and coordination of these complexes. The present work is the first experimental report on complexation of actinide ion with Cucurbit[5]uril (CB5) in solution. The thermodynamic parameters (ΔG, ΔH and ΔS) for complexation of CB5 with U(VI) in formic acid water medium were determined using microcalorimetry and UV-Vis spectroscopy. The enthalpy and entropy of complexation revealed the partial binding of U(VI) to CB5 portal. The partial binding was confirmed by spectroscopic techniques viz. extended X absorption fine structure spectroscopy (EXAFS), 1H and 13C NMR. The EXAFS χ(r) versus r spectra for U-CB5 complex has been fitted from 1.4 to 3.5 Šwith two oxygen shells and a carbon shell. The presence of three carbon atom in secondary shell shows the involvement of only three carbonyl oxygens directly bonding to U(VI) which is in contrast to that calculated from gas phase DFT calculation of unhydrated system. The combined effect of hydration and formic acid encapsulation led to the enhanced stability of partially bound U(VI) to CB5. In the present work the binding of formic acid has also been studied by fluorescence spectroscopy. ESI-MS data shows the unusual stabilization of U(VI) by CB5 in gas phase.

Ionic columnar clustomesogens: associations between anionic hexanuclear rhenium clusters and liquid crystalline triphenylene tethered imidazoliums.

Providing several functionalities to a single material is an emerging challenge with many industrial prospects in materials sciences. Self-assembled organic-inorganic hybrid materials endowed with emission properties are part of these new materials. While the inorganic moieties provide emissivity, the organic part confers nanostructuration and processability. Here we describe how columnar arrangements can be obtained by assembling, via electrostatic interactions, isometric anionic inorganic nanoemitters, namely [Re6Se8(CN)6]4-, with imidazolium counter cations bearing triphenylene units. The resulting hybrids combine the emission of both components and energy transfer has been evidenced between both entities. Hole charge mobilities of the hybrid organic-inorganic columnar mesophases were also evaluated by the space charge limited current (SCLC) method.

Serum antibody response of Indian major carp, Labeo rohita to three species of pathogenic bacteria; Aeromonas hydrophila, Edwardsiella tarda and Pseudomonas fluorescens.

The immune response to mixed whole cell antigens of Aeromonas hydrophila, Edwardsiella tarda and Pseudomonas fluorescens, the common Gram negative bacterial pathogens associated with diseases of Indian major carps were evaluated for their efficacy in triggering antibody responses in rohu, Labeo rohita (Ham.). The rohu yearlings were either immunized with antigens from single bacterial strain, A. hydrophila, E. tarda and P. fluorescens or a combination of all three. An antibody response was detected at 1st week post immunization that rose significantly (p<0.05) at 4th week post immunization in all the immunized groups. The antibody level started declining after 8th week but persisted up to 10th week post immunization in all the immunized groups. Similarly, no significant difference (p>0.05) in the antibody level was found between groups immunized with single and mixed bacterial antigens. Moreover, the use of mixed bacterial antigens did not jeopardize the specific immune response to the vaccine components. Upon challenge with single pathogen, a high relative percent survival was recorded in the group immunized with mixed bacterial antigens and was comparable to those fish immunized with the single bacteria.

First-principles investigation of strain effects on the energy gaps in silicon nanoclusters.

First-principles density functional calculations were performed to study strain effects on the energy gaps in silicon nanoclusters with diameter ranging from 0.6 to 2 nm. Hydrostatic and non-hydrostatic strains have been found to affect the energy gaps differently. For the same strain energy density, non-hydrostatic strain leads to a significantly larger change in the energy gap of silicon clusters compared to that of the hydrostatic strain case. In contrast, hydrostatic and non-hydrostatic strain effects on the energy gaps of bulk Si or larger size Si quantum dots are comparable. Non-hydrostatic strains break the tetrahedral bonding symmetry in silicon, resulting in significant variation in the energy gaps due to the splitting of the degenerate orbitals in the clusters. Our results suggest that the combination of energy gaps and strains permits the engineering of photoluminescence in silicon nanoclusters and offers the possibility of designing novel optical devices and chemical sensors.

Influence of surface modified cellulose microfibrils on the improved mechanical properties of poly (lactic acid).

Cellulose microfibrils (CMF) were extracted from sisal fiber and characterized. Biocomposites of PLA reinforced with CMF were fabricated employing melt blending technique followed by injection moulding. The biocomposites were subjected to various characterization studies to investigate the effect of CMF within the PLA matrix. Differential scanning calorimetry (DSC) measurements confirmed that the addition of CMF accelerates the crystallization process of PLA matrix. Addition of 5 wt.% of CMF with and without compatibilizers and plasticizers such as maleic anhydride, polyethylene glycol and acetyltributyl citrate in PLA improved the crystallization of PLA up to 100 °C. MA grafting gave moderate effects on both the stiffness and ductility, exhibiting optimum properties.

Phosphorescent columnar hybrid materials containing polyionic inorganic nanoclusters.

The ternary polyionic inorganic compound Cs2Mo6Br14 and 18-crown-6 ethers bearing two o-terphenyl units have been combined to design phosphorescent columnar liquid crystalline hybrid materials. The obtained host-guest complexes are very stable even at high temperatures. Depending on their surrounding atmosphere, these hybrids switch reversibly from a high-to-low luminescence state and show a very stable emission intensity up to 140 °C.