Biosynthetic pathway of peucemycin and identification of its derivative from Streptomyces peucetius.

Streptomyces peucetius ATCC 27952 is a well-known producer of important anticancer compounds, daunorubicin and doxorubicin. In this study, we successfully identified a new macrolide, 25-hydroxy peucemycin, that exhibited an antibacterial effect on some pathogens. Based on the structure of a newly identified compound and through the inactivation of a polyketide synthase gene, we successfully identified its biosynthetic gene cluster which was considered to be the cryptic biosynthetic gene cluster. The biosynthetic gene cluster spans 51 kb with 16 open reading frames. Five type I polyketide synthase (PKS) genes encode eight modules that synthesize the polyketide chain of peucemycin before undergoing post-PKS tailoring steps. In addition to the regular starter and extender units, some modules have specificity towards ethylmalonyl-CoA and unusual butylmalonyl-CoA. A credible explanation for the specificity of the unusual extender unit has been searched for. Moreover, the enzyme responsible for the final tailoring pathway was also identified. Based on all findings, a plausible biosynthetic pathway is here proposed. KEY POINTS: • Identification of a new macrolide, 25-hydroxy peucemycin. • An FMN-dependent monooxygenase is responsible for the hydroxylation of peucemycin. • The module encoded by peuC is unique to accept the butylmalonyl-CoA as an unusual extender unit.

Glucosylation of Isoeugenol and Monoterpenes in Corynebacterium glutamicum by YdhE from Bacillus lichenformis.

Corynebacterium glutamicum has been regarded as a food-grade microorganism. In recent years, the research to improve the activities of beneficial therapeutics and pharmaceutical substances has resulted in the engineering of the therapeutically favorable cell factory system of C. glutamicum. In this study, we successfully glucosylated isoeugenol and other monoterpene derivatives in C. glutamicum using a promiscuous YdhE, which is a glycosyltransferase from Bacillus lichenformis. For efficient glucosylation, cultivation conditions such as the production time, substrate concentration, carbon source, and culture medium were optimized. Our system successfully converted about 93% of the isoeugenol to glucosylated compounds in the culture. The glucoside compounds were then purified, analyzed, and identified as isoeugenol-1-O-ß-d-glucoside and isoeugenol-1-O-ß-d-(2″-acetyl)-glucoside.

Plastic waste in sandy beaches and surface water in Thanh Hoa, Vietnam: abundance, characterization, and sources.

The occurrence and characterization of marine debris on beaches bring opportunities to track back the anthropogenic activities around shorelines as well as aid in waste management and control. In this study, the three largest beaches in Thanh Hoa (Vietnam) were examined for plastic waste, including macroplastics (≥ 5 mm) on sandy beaches and microplastics (MPs) (< 5 mm) in surface water. Among 3803 items collected on the beaches, plastic waste accounted for more than 98%. The majority of the plastic wastes found on these beaches were derived from fishing boats and food preservation foam packaging. The FT-IR data indicated that the macroplastics comprised 77% polystyrene, 17% polypropylene, and 6% high-density polyethylene, while MPs discovered in surface water included other forms of plastics such as polyethylene- acrylate, styrene/butadiene rubber gasket, ethylene/propylene copolymer, and zein purified. FT-IR data demonstrated that MPs might also be originated from automobile tire wear, the air, and skincare products, besides being degraded from macroplastics. The highest abundance of MPs was 44.1 items/m3 at Hai Tien beach, while the lowest was 15.5 items/m3 at Sam Son beach. The results showed that fragment form was the most frequent MP shape, accounting for 61.4 ± 14.3% of total MPs. MPs with a diameter smaller than 500 µm accounted for 70.2 ± 7.6% of all MPs. According to our research, MPs were transformed, transported, and accumulated due to anthropogenic activities and environmental processes. This study provided a comprehensive knowledge of plastic waste, essential in devising long-term development strategies in these locations.

Development of gradient index microlenses for the broadband infrared range.

The development of gradient index free-form micro-optic components dedicated to the mid-infrared range is challenging due to the lack of appropriate technology. We propose a method for developing gradient index components for broadband infrared range beyond the transmission window of silicate glass based on nanostructurization using a stack-and-draw fiber drawing technique. A proof-of-concept microlens is developed and verified experimentally in the wavelength range 1.5-4.3 µm. The microlenses are composed of a set of nanorods with a diameter of 940 nm made of a pair of SiO2-PbO-Bi2O3-Ga2O3 based glasses ordered into the preliminary calculated binary pattern. The pattern forms effectively continuous parabolic refractive index distribution for infrared range according to Maxwell-Garnett effective medium model. The development of individual microlenses with a diameter of 118 µm and focal length of 278 µm at the wavelength of 3.75 µm are reported. A large array of 737 microlenses with an individual diameter of 125 µm and focal length of 375 µm is also presented and analyzed.

Transmission of an optical vortex beam in antiresonant fibers generated in an all-fiber system.

We report an experimental study on transmission of orbital angular momentum mode in antiresonant fibers generated with a dedicated all-fiber optical vortex phase mask. The vortex generator can convert Gaussian beam into vortex beams with topological charge l = 1. Generated vortex beam is directly butt-coupled into the antiresonant fiber and propagates over distance of 150 cm. The stability and sensitivity of the transmitted vortex beam on the external perturbations including bending, axial stress, and twisting is investigated. We demonstrate distortion-free vortex propagation for the axial stress force below 0.677 N, a bend radius greater than 10 cm.

N-Glucosylation in Corynebacterium glutamicum with YdhE from Bacillus lichenformis.

Corynebacterium glutamicum is traditionally known as a food-grade microorganism due to its high ability to produce amino acids and its endotoxin-free recombinant protein expression factory. In recent years, studies to improve the activities of useful therapeutics and pharmaceutical compounds have led to the engineering of the therapeutically advantageous C. glutamicum cell factory system. One of the well-studied ways to improve the activities of useful compounds is glucosylation with glycosyltransferases. In this study, we successfully and efficiently glycosylated therapeutic butyl-4-aminobenzoate and other N-linked compounds in C. glutamicum using a promiscuous YdhE, which is a glycosyltransferase from Bacillus lichenformis. For efficient glucosylation, components, such as promoter, codons sequence, expression temperatures, and substrate and glucose concentrations were optimized. With glucose as the sole carbon source, we achieved a conversion rate of almost 96% of the glycosylated products in the culture medium. The glycosylated product of high concentration was successfully purified by a simple purification method, and subjected to further analysis. This is a report of the in vivo cultivation and glucosylation of N-linked compounds in C. glutamicum.

Genome mining Streptomyces sp. KCTC 0041BP as a producer of dihydrochalcomycin.

Streptomyces sp. KCTC 0041BP, which was isolated from a soil sample in Cheolwon, Republic of Korea, is a dihydrochalcomycin producer. In this study, we obtained the genome of S. sp. KCTC 0041BP with 7.54 Mb genome size. antiSMASH and the dbCAN2 meta server predicted that the genome would contain 26 secondary metabolite biosynthetic gene clusters (BGCs) and 285 carbohydrate-active enzymes. Besides dihydrochalcomycin, 21 compounds were successfully identified from S. sp. KCTC 0041BP, and among them, the structure of 8 compounds were proven by high-resolution electrospray ionization mass spectrometry (HRESIMS) and nuclear magnetic resonance (NMR). The identification of chalcomycin analogs led to a better understanding of the biosynthetic pathway of dihydrochalcomycin/chalcomycin. From the analysis of cluster 2 and solvent selection, linearmycins were determined. Linearmycins showed antibacterial activity with both Gram-positive and Gram-negative bacteria and antifungal activity. One strain many compounds (OSMAC) strategy was applied to activate the salicylic acid production in this strain. A salicylic acid biosynthetic pathway was also predicted, but not by antiSMASH. These results showed that this strain can produce many useful compounds and potentially produce novel compounds with most secondary BGCs yet to be experimentally identified.

Silica-based photonic crystal fiber infiltrated with 1,2-dibromoethane for supercontinuum generation.

This study proposes a photonic crystal fiber (PCF) made of fused silica glass with the core infiltrated with 1,2-dibromoethane (C2H4Br2) as a new source of supercontinuum light pulses. Due to the modifications of the PCF's structure geometry, a number of computer simulations investigating their optimized structures has been carried out. This aimed at achieving flat near-zero dispersion and zero dispersion wavelength matching of the pump wavelength for efficient spectral broadening. Based on the obtained results, the structural geometries of two C2H4Br2-core PCFs were optimized using numerical modeling for broadband supercontinuum (SC) generation. The first fiber structure with a lattice constant 1.5 µm and filling factor 0.4 has all-normal dispersion profile. The SC with a broadened spectral bandwidth from 0.64 to 1.70 µm is generated by pump pulses centered at a wavelength of 1.03 µm, 120 fs duration, and energy of 1.5 nJ. The second proposed structure-with lattice constant 1.5 µm and filling factor 0.65-has anomalous dispersion for wavelengths longer than 1.03 µm. We obtained high coherence of the SC pulses in the anomalous dispersion range over wavelengths of 0.7-2.4 µm with the same pump pulse as the first fiber and with input energy of 0.09 nJ. These fibers would be interesting candidates for all-fiber SC sources operating with low-energy pump lasers as cost-effective alternatives to glass core fibers.

A Simple Method to Produce Engineered Cartilage from Human Adipose-Derived Mesenchymal Stem Cells and Poly ε-Caprolactone Scaffolds.

INTRODUCTION: The damaged articular cartilage has limited self-regeneration capacity because of the absence of blood vessels, lymphatics, and nerves. Cartilage transplantation is, hence, a popular method used to treat this disease. However, sources of autograft and allogenic cartilage for transplantation are limited. Therefore, this study aims to suggest a simple method to produce engineered cartilage from human adipose-derived mesenchymal stem cells (ADSCs) and poly (ε-caprolactone) (PCL) scaffolds. METHODS: ADSCs were isolated and expanded from fat tissues according to published protocols. PCL-porous scaffolds were produced from PCL with 5 × 5 × 0.6 mm3 with 200-400 µ m pore sizes. ADSCs were seeded on the PCL scaffolds at three different densities (104, 105, 106 cells per scaffold). The adherence of ADSCs on the surface of PCL scaffolds was evaluated based on an immunostaining assay to determine the presence of ADSCs. The cell proliferation on PCL scaffolds was determined by MTT assay. The complexity in ADSCs and PCL scaffolds was induced to cartilage using a chondrogenesis medium. The engineered cartilage was characterized by the accumulation of proteoglycan and aggrecan by Safranin O staining assay. Their structures were evaluated using an H-E staining assay. Finally, these engineered cartilage tissues were transplanted into mice to assess cartilage maturation when compared to natural cartilage. RESULTS: The results showed that the engineered cartilage tissues could be successfully produced by cultures of ADSCs on poly ε-caprolactone scaffolds in combination with chondrogenesis medium. The suitable density of ADSCs was 106 cells/per scaffold of 5 × 6 × 0.6 mm3 with pore size from 200 to 400 µ m. CONCLUSION: The results showed that an in vitro cartilage tissue was created from ADSCs and PCL scaffold. The cartilage tissue exists in the mice for 6 months.

Numerical analysis of optical vortices generation with nanostructured phase masks.

We study the theoretical formation of optical vortices using a nanostructured gradient index phase mask. We consider structures composed of spatially distributed thermally matched glass nanorods with high and low refractive indices. Influence of effective refractive profile distribution, refractive index contrast of component glasses and charge value on the quality of generation of vortices are discussed. A trade-off between waveguiding and phase modulation effects for various refractive index contrast is presented and analysed.

Exploration of cryptic organic photosensitive compound as Zincphyrin IV in Streptomyces venezuelae ATCC 15439.

Zincphyrin IV is a potential organic photosensitizer which is of significant interest for applications in biomedicine, materials science, agriculture (as insecticide), and chemistry. Most studies on Zincphyrin are focused on Zincphyrin III while biosynthesis and application of Zincphyrin IV is comparatively less explored. In this study, we explored Zincphyrin IV production in Streptomyces venezuelae ATCC 15439 through combination of morphology engineering and "One strain many compounds" approach. The morphology engineering followed by change in culture medium led to activation of cryptic Zincphyrin IV biosynthetic pathway in S. venezuelae with subsequent detection of Zincphyrin IV. Morphology engineering applied in S. venezuelae increased the biomass from 7.17 to 10.5 mg/mL after 48 h of culture. Moreover, morphology of engineered strain examined by SEM showed reduced branching and fragmentation of mycelia. The distinct change in color of culture broth visually demonstrated the activation of the cryptic biosynthetic pathway in S. venezuelae. The production of Zincphyrin IV was found to be initiated after overexpression ssgA, resulting in the increase in titer from 4.21 to 7.54 µg/mL. Furthermore, Zincphyrin IV demonstrated photodynamic antibacterial activity against Bacillus subtilis and photodynamic anticancer activity against human ovarian carcinoma cell lines.

Development of large diameter nanostructured GRIN microlenses enhanced with temperature-controlled diffusion.

Nanostructured GRIN components are optical elements which can have an arbitrary refractive index profile while retaining flat-parallel entry and exit facets. A method of their fabrication requires assembly of large quantities of glass rods in order to satisfy subwavelength requirement of the effective medium theory. In this paper, we present a development of gradient index microlenses using a combination of methods: nanostructurization of the preform and controlled diffusion process during lens drawing on a fiber drawing tower. Adding a diffusion process allows us to overcome limits of the effective medium theory related to maximum size of nanorods in the lens structure. We show that nanorods are dissolved during the fiber drawing process in high temperature and glass components are locally quasi-uniformly distributed. To demonstrate feasibility of the proposed approach, we have developed and experimentally verified the performance of a nGRIN microlens with a diameter of 115 µm composed of 115 rods on the diagonal, and length of 200 µm devoted to work for the wavelength over 658 nm.

Arsenic and other trace elements in groundwater and human urine in Ha Nam province, the Northern Vietnam: contamination characteristics and risk assessment.

The contamination characteristics of arsenic and other trace elements in groundwater and the potential risks of arsenic from the groundwater were investigated. Elevated contamination of arsenic, barium and manganese was observed in tube-well water of two villages (Chuyen Ngoai and Chau Giang) in Ha Nam province in the Northern Vietnam. Concentrations of As in the groundwater ranged from 12.8 to 884 µg/L with mean values in Chuyen Ngoai and Chau Giang were 614.7 and 160.1 µg/L, respectively. About 83 % of these samples contained As concentrations exceeding WHO drinking water guideline of 10 µg/L. The mean values of Mn and Ba in groundwater from Chuyen Ngoai and Chau Giang were 300 and 657 µg/L and 650 and 468 µg/L, respectively. The mean value of Ba concentration in groundwater in both Chuyen Ngoai and Chau Giang was about 22 % of the samples exceeded the WHO guideline (700 µg/L). Arsenic concentrations in human urine of residents from Chuyen Ngoai and Chau Giang were the range from 8.6 to 458 µg/L. The mean values of Mn and Ba in human urine of local people from Chuyen Ngoai were 46.9 and 62.8 µg/L, respectively, while those in people from Chau Giang were 25.9 and 45.9 µg/L, respectively. The average daily dose from ingesting arsenic for consuming both untreated and treated groundwater is from 0.02 to 11.5 and 0.003 to 1.6 µg/kg day, respectively. Approximately, 57 % of the families using treated groundwater and 64 % of the families using untreated groundwater could be affected by elevated arsenic exposure.

The role of chitosan in enhancing the solubility and antibacterial activity of emodin against drug-resistant bacteria.

Similar to most anthraquinone compounds, the pharmacological properties of emodin are limited because of its low water solubility. In this study, the formulation of chitosan and emodin (EMD/CS) was prepared by a bottom-up method with precipitation and sonication steps in order to enhance the solubility of emodin. Thanks to the interactions of oxygen-and nitrogen-containing groups in chitosan with emodin molecules, the solubility of emodin in the formulation was remarkably increased to 0.5 mg/mL. The EMD/CS particles were well dispersed and distributed in a range of sub-micrometer with an average particle size of 342 nm. The EMD/CS formulation exhibited synergic antibacterial activity of emodin and chitosan, against drug-resistant bacterial strains, namely Methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli O157:H7 (E. coli O157:H7). When the compositions of emodin and chitosan increased, the antibacterial effectiveness of the EMD/CS formulation increased. The EMD/CS formulation with compositions of 0.5 mg/mL of emodin and 9.0 mg/mL of chitosan could significantly inhibit the proliferation of E. coli O157:H7. Meanwhile, the EMD/CS formulation with a lower concentration of emodin (0.4 mg/mL) and chitosan (7.2 mg/mL) could cause an extermination effect on MRSA. The enhanced solubility of EMD/CS formulation suggests that this formulation can be a potential candidate for the treatment of infectious diseases caused by drug-resistant bacterial pathogens.

Free-Form Optical Fiber with a Square Mode and Top-Hat Intensity Distribution.

The development of bend-induced effectively single-mode fiber with a square cross-section and flat top-hat intensity distribution is reported using core topology nanostructuring dedicated to femtosecond laser ablation systems. The fiber's core comprises 5419 silica and germanium-doped silica nanorods with a diameter of 430 nm each arranged into a hexagonal lattice. The distribution of the rods is calculated using in-house developed code based on the Monte Carlo algorithm to obtain a target shape of mode and intensity distribution. As a proof-of-concept, a silica nanostructured fiber with a 24 µm core is developed and verified against the purity of mode guidance, bending, and guiding losses. It is shown that for a wavelength of 1030 nm, the fiber is effectively single-mode with 96% mode purity when bending with a radius of 20 cm is applied. The fiber has a measured mode area of 360 µm2, numerical aperture of 0.03, and total losses of 0.07 dB m-1.

Berberine-loaded polylactic acid nanofiber scaffold as a drug delivery system: The relationship between chemical characteristics, drug-release behavior, and antibacterial efficiency.

Hydrophobic berberine powder (BBR) and hydrophilic BBR nanoparticles (BBR NPs) were loaded into an electrospun polylactic acid (PLA) nanofiber scaffold for modulating the release behavior of BBR in an aqueous medium. The BBR release from the BBR/PLA and BBR NPs/PLA nanofiber scaffolds was investigated in relation to their chemical characteristics, BBR dispersion into nanofibers, and wettability. The BBR release profiles strongly influenced the antibacterial efficiency of the scaffolds over time. When the BBR was loaded, the BBR/PLA nanofiber scaffold exhibited an extremely hydrophobic feature, causing a triphasic release profile in which only 9.8 wt % of the loaded BBR was released in the first 24 h. This resulted in a negligible inhibitory effect against methicillin-resistant Staphylococcus aureus bacteria. Meanwhile, the BBR NPs/PLA nanofiber scaffold had more wettability and higher concentration of BBR NPs dispersed on the surface of PLA nanofibers. This led to a sustained release of 75 wt % of the loaded BBR during the first 24 h, and consequently boosted the antibacterial effectiveness. Moreover, the cytotoxicity test revealed that the BBR NPs/PLA nanofiber scaffold did not induce any changes in morphology and proliferation of MA-104 cell monolayers. It suggests that the BBR/PLA and BBR NPs/PLA nanofiber scaffolds can be used in different biomedical applications, such as wound dressing, drug delivery systems, and tissue engineering, according to the requirement of BBR concentration for the desired therapeutic effects.

Biosynthesis of Apigenin Glucosides in Engineered Corynebacterium glutamicum.

Glucosylation is a well-known approach to improve the solubility, pharmacological, and biological properties of flavonoids, making flavonoid glucosides a target for large-scale biosynthesis. However, the low yield of products coupled with the requirement of expensive UDP-sugars limits the application of enzymatic systems for large-scale. C. glutamicum is a Gram-positive and generally regarded as safe (GRAS) bacteria frequently employed for the large-scale production of amino acids and bio-fuels. Due to the versatility of its cell factory system and its non-endotoxin producing properties, it has become an attractive system for the industrial-scale biosynthesis of alternate products. Here, we explored the cell factory of C. glutamicum for efficient glucosylation of flavonoids using apigenin as a model flavonoid, with the heterologous expression of a promiscuous glycosyltransferase, YdhE from Bacillus licheniformis and the endogenous overexpression of C. glutamicum genes galU1 encoding UDP-glucose pyrophosphorylase and pgm encoding phosphoglucomutase involved in the synthesis of UDP-glucose to create a C. glutamicum cell factory system capable of efficiently glucosylation apigenin with a high yield of glucosides production. Consequently, the production of various apigenin glucosides was controlled under different temperatures yielding almost 4.2 mM of APG1(apigenin-4'-O-ß-glucoside) at 25°C, and 0.6 mM of APG2 (apigenin-7-O-ß-glucoside), 1.7 mM of APG3 (apigenin-4',7-O-ß-diglucoside) and 2.1 mM of APG4 (apigenin-4',5-O-ß-diglucoside) after 40 h of incubation with the supplementation of 5 mM of apigenin and 37°C. The cost-effective developed system could be used to modify a wide range of plant secondary metabolites with increased pharmacokinetic activities on a large scale without the use of expensive UDP-sugars.

Emission and distribution profiles of polycyclic aromatic hydrocarbons in solid residues of municipal and industrial waste incinerators, Northern Vietnam.

The concentrations and profiles of 18 polycyclic aromatic hydrocarbons (PAHs) in particulate matter (PM10), fly ash (FA), and bottom ash (BA) were examined in three incineration residues. Samples were collected from different municipal and industrial solid waste incinerators in Northern Vietnam. The average concentrations of total PAHs in PM10, fly ash, and bottom ash were 9.55 × 103 ng/Nm3, 215 × 103 ng/g, and 2.38 ng/g, respectively. Low-molecular-weight PAHs (2 to 3 rings) were predominant in most samples. The emission factor of total PAHs decreased in the order of FA > BA > PM10. A higher concentration of total PAHs was found in industrial facilities than that in municipal ones. The high carcinogenic proportion of PAHs together with significantly high annual emissions reflect the high pollution risk to the ecosystem by PAHs in the case of reuse of incineration ashes (e.g., brick production). Regarding the carcinogenic risk of PAH-bounded ashes or particles, calculations from this study imply the significant threat for workers who have been manipulated in the incineration facilities, directly exposed to fly and bottom ashes. Meanwhile, the risk from PAH-bound particulate was not considered a significant threat for both normal adults and children. Further study on PAHs contained in incinerator waste dumps should be conducted in Vietnam to assess the potential contamination risk of these incineration by-products.

Complexes of Ag and ZnO nanoparticles with BBR for enhancement of gastrointestinal antibacterial activity through the impacts of size and composition.

This study introduces the bioformulations of Ag/BBR and ZnO/BBR complexes against pathogenic bacteria in the gastrointestinal tract. Without the use of toxic reduction agents, Ag and ZnO NPs were prepared using an electrochemical method and then facially mixed with BBR solution to form Ag/BBR and ZnO/BBR complexes. BBR molecules are strongly conjugated with Ag and ZnO NPs through coordinated bonding and electrostatic interaction. As a result, the presence of BBR significantly influenced the nanoparticle growth, resulting in the formation of core/shell structured Ag/BBR and ZnO/BBR NPs with small particle sizes. The antibacterial test showed that BBR, Ag, or ZnO components all contributed to the increase of antibacterial ability of Ag/BBR and ZnO/BBR NPs against both methicillin-resistant Staphylococcus aureus (MRSA) and Salmonella enteritidis (S. enteritidis). The bactericidal ability of Ag/BBR and ZnO/BBR complexes against MRSA was exhibited even at a concentration of four-fold dilution (corresponding to 1.25 g L-1 of BBR and 46.25 mg L-1 of Ag) and two-fold dilution (corresponding to 2.5 g L-1 of BBR and 10 mg L-1 of ZnO), respectively, while that of the Ag/BBR complex against S. enteritidis showed at a concentration of two-fold dilution corresponding to 2.5 g L-1 of BBR and 92.5 mg L-1 of Ag. The results obtained in this study support that Ag/BBR and ZnO/BBR complexes can be potential therapeutic agents against gastrointestinal infections.

Broadband optical vortex beam generation using flat-surface nanostructured gradient index vortex phase masks.

We developed a new kind of compact flat-surface nanostructured gradient index vortex phase mask, for the effective generation of optical vortex beams in broadband infrared wavelength range. A low-cost nanotechnological material method was employed for this work. The binary structure component consists of 17,557 nano-sized rods made of two lead-bismuth-gallium silicate glasses which were developed in-house. Those small rods are spatially arranged in such a way that, according to effective medium theory, the refractive index of this internal structure is constant in the radial direction and linearly changes following azimuthal angle. Numerical results demonstrated that a nanostructured vortex phase mask with a thickness of 19 µm can convert Gaussian beams into fundamental optical vortices over 290 nm wavelength bandwidth from 1275 to 1565 nm. This has been confirmed in experiments using three diode laser sources operating at 1310, 1550, and 1565 nm. The generation of vortex beams is verified through their uniform doughnut-like intensity distributions, clear astigmatic transformation patterns, and spiral as well as fork-like interferograms. This new flat-surface component can be directly mounted to an optical fiber tip for simplifying vortex generator systems as well as easier manipulation of the generated OVB in three-dimensional space.